From: Matthias Brugger <matthias.bgg@gmail.com>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, kernel@collabora.com
Subject: Re: [PATCH v1 2/3] soc: mediatek: mtk-cmdq: Mark very unlikely branches as such
Date: Wed, 2 Oct 2024 14:41:22 +0200 [thread overview]
Message-ID: <7d577541-cada-4f6f-8e83-c420dd0e9382@gmail.com> (raw)
In-Reply-To: <20240918100620.103536-3-angelogioacchino.delregno@collabora.com>
On 18/09/2024 12:06, AngeloGioacchino Del Regno wrote:
> Calling cmdq packet builders with an unsupported event number,
> or without left/right operands (in the case of logic commands)
> means that the caller (another driver) wants to perform an
> unsupported operation, so this means that the caller must be
> fixed instead.
>
> Anyway, such checks are here for safety and, unless any driver
> bug or any kind of misconfiguration is present, will always be
> false so add a very unlikely hint for those.
>
> Knowing that CPUs' branch predictors (and compilers, anyway) are
> indeed smart about these cases, this is done mainly for human
> readability purposes.
>
Are you really sure we need that? As you mentioned the unlikely() is probably
useless as compiler and branch predictions will do the job. I don't see the
complexity in the code to have this annotations for human readability.
I would argue against using unlikely() here as, in general, it is discouraged to
use it. We will just create a data point of doing things that should only be
done with very good reason. I don't see the reason here, it will only confuse
other developers about the use of likely() and unlikely().
Regards,
Matthias
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
> drivers/soc/mediatek/mtk-cmdq-helper.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 620c371fd1fc..4ffd1a35df87 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -336,7 +336,7 @@ int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear)
> struct cmdq_instruction inst = { {0} };
> u32 clear_option = clear ? CMDQ_WFE_UPDATE : 0;
>
> - if (event >= CMDQ_MAX_EVENT)
> + if (unlikely(event >= CMDQ_MAX_EVENT))
> return -EINVAL;
>
> inst.op = CMDQ_CODE_WFE;
> @@ -351,7 +351,7 @@ int cmdq_pkt_acquire_event(struct cmdq_pkt *pkt, u16 event)
> {
> struct cmdq_instruction inst = {};
>
> - if (event >= CMDQ_MAX_EVENT)
> + if (unlikely(event >= CMDQ_MAX_EVENT))
> return -EINVAL;
>
> inst.op = CMDQ_CODE_WFE;
> @@ -366,7 +366,7 @@ int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
> {
> struct cmdq_instruction inst = { {0} };
>
> - if (event >= CMDQ_MAX_EVENT)
> + if (unlikely(event >= CMDQ_MAX_EVENT))
> return -EINVAL;
>
> inst.op = CMDQ_CODE_WFE;
> @@ -381,7 +381,7 @@ int cmdq_pkt_set_event(struct cmdq_pkt *pkt, u16 event)
> {
> struct cmdq_instruction inst = {};
>
> - if (event >= CMDQ_MAX_EVENT)
> + if (unlikely(event >= CMDQ_MAX_EVENT))
> return -EINVAL;
>
> inst.op = CMDQ_CODE_WFE;
> @@ -476,7 +476,7 @@ int cmdq_pkt_logic_command(struct cmdq_pkt *pkt, u16 result_reg_idx,
> {
> struct cmdq_instruction inst = { {0} };
>
> - if (!left_operand || !right_operand || s_op >= CMDQ_LOGIC_MAX)
> + if (unlikely(!left_operand || !right_operand || s_op >= CMDQ_LOGIC_MAX))
> return -EINVAL;
>
> inst.op = CMDQ_CODE_LOGIC;
next prev parent reply other threads:[~2024-10-02 12:41 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-18 10:06 [PATCH v1 0/3] soc: mediatek: mtk-cmdq-helper: Various cleanups AngeloGioacchino Del Regno
2024-09-18 10:06 ` [PATCH v1 1/3] soc: mediatek: mtk-cmdq: Move mask build and append to function AngeloGioacchino Del Regno
2024-10-02 12:33 ` Matthias Brugger
2024-09-18 10:06 ` [PATCH v1 2/3] soc: mediatek: mtk-cmdq: Mark very unlikely branches as such AngeloGioacchino Del Regno
2024-10-02 12:41 ` Matthias Brugger [this message]
2024-10-02 12:43 ` AngeloGioacchino Del Regno
2024-10-02 12:58 ` Matthias Brugger
2024-10-02 13:02 ` AngeloGioacchino Del Regno
2024-09-18 10:06 ` [PATCH v1 3/3] soc: mediatek: mtk-cmdq: Move cmdq_instruction init to declaration AngeloGioacchino Del Regno
2024-09-19 22:43 ` kernel test robot
2024-10-02 12:52 ` Matthias Brugger
2024-10-02 9:08 ` [PATCH v1 0/3] soc: mediatek: mtk-cmdq-helper: Various cleanups AngeloGioacchino Del Regno
2024-10-02 13:00 ` Matthias Brugger
2024-10-03 8:08 ` AngeloGioacchino Del Regno
2024-10-07 14:33 ` Matthias Brugger
2024-10-07 14:36 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7d577541-cada-4f6f-8e83-c420dd0e9382@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®