mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* smc91x does not use netdev=
@ 2006-07-18 22:06 Shaun Jackman
  0 siblings, 0 replies; only message in thread
From: Shaun Jackman @ 2006-07-18 22:06 UTC (permalink / raw)
  To: uClinux development list, LKML, Nicolas Pitre

On 7/18/06, Shaun Jackman <sjackman@gmail.com> wrote:
> I've compiled the smc91x driver into my kernel (CONFIG_SMC91X=y), but
> the boot process complains `IP-Config: No network devices available.'
> I tried using the netdev kernel parameter to start the smc91x driver
> (netdev=1,0x300,eth0 and ether=1,0x300,eth0), but I don't see any
> output on the console from the smc91x driver. The driver doesn't
> appear to be starting. How do I start the smc91x driver? I'm compiling
> linux.2.6.14.7-hsc0 for ARM nommu (Atmel AT91).
>
> Thanks,
> Shaun

The smc91x driver doesn't seem to pull its parameters from the netdev=
parameter. Instead, a `platform_bus' is used, which requires a call to
`platform_add_devices' -- an example of this below. Could the smc91x
driver be modified to pulls its parameters from netdev=?

Cheers,
Shaun

#include <linux/device.h>

static struct resource smc91x_resources[] = {
	[0] = {
		.name	= "smc91x-regs",
		.start	= 0x300,
		.end	= 0x30f,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= 17,
		.end	= 17,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device smc91x_device = {
	.name		= "smc91x",
	.id		= -1,
	.num_resources	= ARRAY_SIZE(smc91x_resources),
	.resource	= smc91x_resources,
};

static struct platform_device *devices[] __initdata = {
	&smc91x_device,
};

void __init pathport_init(void)
{
	platform_add_devices(devices, ARRAY_SIZE(devices));
}

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2006-07-18 22:06 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-07-18 22:06 smc91x does not use netdev= Shaun Jackman

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®