mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v3] arm64: dts: ti: k3-j721s2: Correct pinmux offset for ospi
@ 2023-08-03 14:56 Udit Kumar
  2023-08-03 17:14 ` Vaishnav Achath
  0 siblings, 1 reply; 2+ messages in thread
From: Udit Kumar @ 2023-08-03 14:56 UTC (permalink / raw)
  To: nm, vigneshr, kristo, robh+dt, krzysztof.kozlowski+dt, conor+dt,
	sinthu.raja, t-konduru, linux-arm-kernel, devicetree,
	linux-kernel, vaishnav.a, eblanc
  Cc: Udit Kumar

Due to non-addressable regions in J721S2 SOC wkup_pmx was split
into four regions from wkup_pmx0 to wkup_pmx3.

After split while updating the pin mux references to newly defined
four wkup_pmx, pin mux for OSPI0 was left.
Pin mux for OSPI0 is spread over two range wkup_pmx0
and wkup_pmx1, correcting pin mux for ospi and
adding correct pin mux setting within ospi node.

Also correcting OSPI1 pinmux which falls under wkup_pmx1
along with removing unused MCU_OSPI1_CSn1 pin for OSPI.

Fixes: 6bc829ceea41 ("arm64: dts: ti: k3-j721s2: Fix wkup pinmux range")

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---

Logs with v3
https://gist.github.com/uditkumarti/6c8b1b1a0bc0bcfef5e04de37c3cb411

dtbs_check run after applying https://lore.kernel.org/all/20230721082654.27036-1-tony@atomide.com/

Change log:

Changes in v3:
  - Corrected wkup_pmx for ospi1
  - Removed unused pin MCU_OSPI1_CSn1, shared with pmic 
  - v2: https://lore.kernel.org/all/20230802113500.162276-1-u-kumar1@ti.com/

Changes in v2:
  - Changed name of pin mux to align with
  https://lore.kernel.org/all/20230721082654.27036-1-tony@atomide.com/ patch
  - v1: https://lore.kernel.org/all/20230801125626.3287306-1-u-kumar1@ti.com/


 .../dts/ti/k3-j721s2-common-proc-board.dts    | 19 ++++++++++---------
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi  | 13 ++++++++++---
 2 files changed, 20 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index 02b7a559bdf2..88e80996f56b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -250,18 +250,19 @@ J721S2_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */
 			J721S2_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */
 		>;
 	};
+};
 
+&wkup_pmx1 {
 	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x040, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
-			J721S2_WKUP_IOPAD(0x05c, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
-			J721S2_WKUP_IOPAD(0x060, PIN_OUTPUT, 0) /* (C21) MCU_OSPI1_CSn1 */
-			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
-			J721S2_WKUP_IOPAD(0x050, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
-			J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
-			J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
-			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
-			J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
+			J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
+			J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
+			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
+			J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
+			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
+			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index d57dd43da0ef..fd1d6c884736 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -45,8 +45,6 @@ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
 			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */
 			J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */
 			J721S2_WKUP_IOPAD(0x030, PIN_OUTPUT, 0) /* (G17) MCU_OSPI0_CSn1 */
-			J721S2_WKUP_IOPAD(0x038, PIN_OUTPUT, 0) /* (F14) MCU_OSPI0_CSn2 */
-			J721S2_WKUP_IOPAD(0x03c, PIN_OUTPUT, 0) /* (F17) MCU_OSPI0_CSn3 */
 			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */
 			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */
 			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */
@@ -61,6 +59,15 @@ J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E20) MCU_OSPI0_LBCLKO */
 	};
 };
 
+&wkup_pmx1 {
+	mcu_fss0_ospi0_1_pins_default: mcu-fss0-ospi0-1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F14) MCU_OSPI0_CSn2 */
+			J721S2_WKUP_IOPAD(0x004, PIN_OUTPUT, 0) /* (F17) MCU_OSPI0_CSn3 */
+		>;
+	};
+};
+
 &wkup_pmx2 {
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		pinctrl-single,pins = <
@@ -127,7 +134,7 @@ &main_mcan16 {
 &ospi0 {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
-- 
2.34.1


^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-08-03 17:14 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-08-03 14:56 [PATCH v3] arm64: dts: ti: k3-j721s2: Correct pinmux offset for ospi Udit Kumar
2023-08-03 17:14 ` Vaishnav Achath

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®