* qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed!
@ 2024-12-08 22:21 Paul Menzel
2025-03-23 11:41 ` Paul Menzel
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2024-12-08 22:21 UTC (permalink / raw)
To: Kalle Valo, Jeff Johnson; +Cc: Baochen Qiang, ath10k, LKML
[-- Attachment #1: Type: text/plain, Size: 4585 bytes --]
Dear Linux folks,
Today the Wi-Fi connection stopped working, and the logs contained:
[44177.000699] ath10k_pci 0000:3a:00.0: firmware crashed! (guid
1b4a40c5-4495-4c5b-9df9-b7395848239c)
[44177.000720] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target
0x05030000 chip_id 0x00340aff sub 1a56:1535
[44177.000731] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0
tracing 0 dfs 0 testmode 0
[44177.002450] ath10k_pci 0000:3a:00.0: firmware ver
WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[44177.004168] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A
crc32 d2863f91
[44177.004176] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4
htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[44177.014494] ath10k_pci 0000:3a:00.0: failed to get memcpy hi
address for firmware address 4: -16
[44177.014498] ath10k_pci 0000:3a:00.0: failed to read firmware
dump area: -16
[44177.014500] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
[44177.014508] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12
3 3
[44177.014517] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 19 19
64 65
[44177.014525] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 39 37
36 37
[44177.014532] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 20 20
22 20
[44177.014540] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 6457 6457
222 158
[44177.014548] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0
64 0
[44177.014556] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 29 29
0 0
[44177.014563] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0
1 0
[44177.109219] ieee80211 phy0: Hardware restart was requested
[44177.429445] ath10k_pci 0000:3a:00.0: device successfully recovered
Please find the output of `dmesg` with two firmware crashes attached.
Looking through my logs since September 20th with Linux 6.11-rcX, this
is not the first firmware crash. The `guid` value differs pairwaise
between each of them.
Kind regards,
Paul
PS: Other times:
-- Boot caea92a03f6d4776926f451f8281ea31 --
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed!
(guid 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
Sep 26 12:32:58 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed!
(guid c4a6c6a2-3cf4-445e-b16b-2baa35d547f3)
Sep 26 12:46:02 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed!
(guid b8c8a5f0-7ff7-45c3-8ecb-7ba8074ba6f7)
-- Boot 26e7175e65254625bf58276e9532773e --
Okt 23 12:11:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed!
(guid 1b3f438c-339c-4ad1-9d82-92a96a07c3c2)
Earliest crash:
Sep 26 10:41:36 abreu kernel: Linux version 6.11.0-07273-g1e7530883cd2
(build@bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-5) 14.2.0,
GNU ld (GNU Binutils for Debian) 2.43.1) #12 SMP PREEMPT_DYNAMIC Sun Sep
22 09:57:36 CEST 2024
[…]
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed!
(guid 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2
target 0x05030000 chip_id 0x00340aff sub 1a56:1535
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0
debugfs 0 tracing 0 dfs 0 testmode 0
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver
WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2
bmi_id N/A crc32 d2863f91
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87
wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get
memcpy hi address for firmware address 4: -16
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to read
firmware dump area: -16
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine
register dump:
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400
12 12 3 3
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800
28 28 265 266
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00
29 27 90 91
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000
15 15 17 15
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400
3887 3887 217 153
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800
0 0 64 0
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00
20 20 16 16
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000
1 0 1 0
[-- Attachment #2: 20241208--dell-xps-13-9360--linux-6.13.0-rc1-00316-gb5f217084ab3.txt --]
[-- Type: text/plain, Size: 164160 bytes --]
[ 0.000000] Linux version 6.13.0-rc1-00316-gb5f217084ab3 (build@bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-8) 14.2.0, GNU ld (GNU Binutils for Debian) 2.43.50.20241204) #37 SMP PREEMPT_DYNAMIC Sat Dec 7 07:34:03 CET 2024
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.13.0-rc1-00316-gb5f217084ab3 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M cryptomgr.notests
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000556aafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x51a78018-0x51a88057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000051a78017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000051a78018-0x0000000051a88057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000051a88058-0x00000000556aafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] efi: EFI v2.4 by American Megatrends
[ 0.000000] efi: ACPI=0x6518d000 ACPI 2.0=0x6518d000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x6f812000 ESRT=0x6fc86698 MEMATTR=0x62679298 INITRD=0x5577da98 TPMEventLog=0x65188018
[ 0.000000] efi: Remove mem36: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[ 0.000000] efi: Not removing mem38: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem40: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
[ 0.000000] DMI: Memory slots populated: 2/2
[ 0.000000] tsc: Detected 2900.000 MHz processor
[ 0.000000] tsc: Detected 2899.886 MHz TSC
[ 0.000805] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000807] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000813] last_pfn = 0x481800 max_arch_pfn = 0x400000000
[ 0.000817] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 0.000818] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001108] last_pfn = 0x78600 max_arch_pfn = 0x400000000
[ 0.007066] esrt: Reserving ESRT space from 0x000000006fc86698 to 0x000000006fc866d0.
[ 0.007071] Using GB pages for direct mapping
[ 0.013390] printk: log buffer data + meta data: 8388608 + 29360128 = 37748736 bytes
[ 0.013391] printk: early log buf free: 125320(95%)
[ 0.013392] Secure boot disabled
[ 0.013393] RAMDISK: [mem 0x51a89000-0x52593fff]
[ 0.013396] ACPI: Early table checksum verification disabled
[ 0.013399] ACPI: RSDP 0x000000006518D000 000024 (v02 DELL )
[ 0.013402] ACPI: XSDT 0x000000006518D0C8 00010C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013407] ACPI: FACP 0x00000000651B2A48 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.013411] ACPI: DSDT 0x000000006518D260 0257E7 (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.013414] ACPI: FACS 0x000000006F86F180 000040
[ 0.013415] ACPI: APIC 0x00000000651B2B58 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.013418] ACPI: FPDT 0x00000000651B2BE0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013419] ACPI: FIDT 0x00000000651B2C28 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013422] ACPI: MCFG 0x00000000651B2CD8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.013424] ACPI: HPET 0x00000000651B2D18 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.013426] ACPI: SSDT 0x00000000651B2D50 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.013428] ACPI: BOOT 0x00000000651B30B0 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013430] ACPI: SSDT 0x00000000651B30D8 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.013432] ACPI: HPET 0x00000000651B43A8 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.013434] ACPI: SSDT 0x00000000651B43E0 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.013436] ACPI: UEFI 0x00000000651B5168 000042 (v01 00000000 00000000)
[ 0.013438] ACPI: SSDT 0x00000000651B51B0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.013440] ACPI: LPIT 0x00000000651B6090 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.013443] ACPI: WSMT 0x00000000651B6128 000028 (v01 DELL CBX3 00000000 MSFT 0000005F)
[ 0.013444] ACPI: SSDT 0x00000000651B6150 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.013450] ACPI: SSDT 0x00000000651B62B8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.013454] ACPI: SSDT 0x00000000651B6558 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.013456] ACPI: SSDT 0x00000000651B9560 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.013458] ACPI: DBGP 0x00000000651B9640 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.013460] ACPI: DBG2 0x00000000651B9678 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.013462] ACPI: SSDT 0x00000000651B96D0 0007DD (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.013464] ACPI: SSDT 0x00000000651B9EB0 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.013466] ACPI: SLIC 0x00000000651C23A8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.013468] ACPI: NHLT 0x00000000651C2520 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.013470] ACPI: BGRT 0x00000000651C2550 000038 (v00 01072009 AMI 00010013)
[ 0.013472] ACPI: TPM2 0x00000000651C2588 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.013474] ACPI: ASF! 0x00000000651C25C0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.013477] ACPI: DMAR 0x00000000651C2660 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.013478] ACPI: Reserving FACP table memory at [mem 0x651b2a48-0x651b2b53]
[ 0.013479] ACPI: Reserving DSDT table memory at [mem 0x6518d260-0x651b2a46]
[ 0.013480] ACPI: Reserving FACS table memory at [mem 0x6f86f180-0x6f86f1bf]
[ 0.013481] ACPI: Reserving APIC table memory at [mem 0x651b2b58-0x651b2bdb]
[ 0.013481] ACPI: Reserving FPDT table memory at [mem 0x651b2be0-0x651b2c23]
[ 0.013482] ACPI: Reserving FIDT table memory at [mem 0x651b2c28-0x651b2cd3]
[ 0.013482] ACPI: Reserving MCFG table memory at [mem 0x651b2cd8-0x651b2d13]
[ 0.013483] ACPI: Reserving HPET table memory at [mem 0x651b2d18-0x651b2d4f]
[ 0.013484] ACPI: Reserving SSDT table memory at [mem 0x651b2d50-0x651b30a8]
[ 0.013484] ACPI: Reserving BOOT table memory at [mem 0x651b30b0-0x651b30d7]
[ 0.013485] ACPI: Reserving SSDT table memory at [mem 0x651b30d8-0x651b43a6]
[ 0.013485] ACPI: Reserving HPET table memory at [mem 0x651b43a8-0x651b43df]
[ 0.013486] ACPI: Reserving SSDT table memory at [mem 0x651b43e0-0x651b5163]
[ 0.013487] ACPI: Reserving UEFI table memory at [mem 0x651b5168-0x651b51a9]
[ 0.013487] ACPI: Reserving SSDT table memory at [mem 0x651b51b0-0x651b608d]
[ 0.013488] ACPI: Reserving LPIT table memory at [mem 0x651b6090-0x651b6123]
[ 0.013488] ACPI: Reserving WSMT table memory at [mem 0x651b6128-0x651b614f]
[ 0.013489] ACPI: Reserving SSDT table memory at [mem 0x651b6150-0x651b62b0]
[ 0.013490] ACPI: Reserving SSDT table memory at [mem 0x651b62b8-0x651b6556]
[ 0.013490] ACPI: Reserving SSDT table memory at [mem 0x651b6558-0x651b9559]
[ 0.013491] ACPI: Reserving SSDT table memory at [mem 0x651b9560-0x651b963a]
[ 0.013491] ACPI: Reserving DBGP table memory at [mem 0x651b9640-0x651b9673]
[ 0.013492] ACPI: Reserving DBG2 table memory at [mem 0x651b9678-0x651b96cb]
[ 0.013493] ACPI: Reserving SSDT table memory at [mem 0x651b96d0-0x651b9eac]
[ 0.013493] ACPI: Reserving SSDT table memory at [mem 0x651b9eb0-0x651c23a0]
[ 0.013494] ACPI: Reserving SLIC table memory at [mem 0x651c23a8-0x651c251d]
[ 0.013494] ACPI: Reserving NHLT table memory at [mem 0x651c2520-0x651c254c]
[ 0.013495] ACPI: Reserving BGRT table memory at [mem 0x651c2550-0x651c2587]
[ 0.013496] ACPI: Reserving TPM2 table memory at [mem 0x651c2588-0x651c25bb]
[ 0.013496] ACPI: Reserving ASF! table memory at [mem 0x651c25c0-0x651c265f]
[ 0.013497] ACPI: Reserving DMAR table memory at [mem 0x651c2660-0x651c274f]
[ 0.013614] No NUMA configuration found
[ 0.013615] Faking a node at [mem 0x0000000000000000-0x00000004817fffff]
[ 0.013625] NODE_DATA(0) allocated [mem 0x47f3d5680-0x47f3fffff]
[ 0.013793] Zone ranges:
[ 0.013794] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.013795] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.013797] Normal [mem 0x0000000100000000-0x00000004817fffff]
[ 0.013798] Device empty
[ 0.013798] Movable zone start for each node
[ 0.013800] Early memory node ranges
[ 0.013800] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.013802] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.013802] node 0: [mem 0x0000000000100000-0x00000000556aafff]
[ 0.013803] node 0: [mem 0x00000000556ad000-0x0000000064df3fff]
[ 0.013804] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
[ 0.013804] node 0: [mem 0x0000000078000000-0x00000000785fffff]
[ 0.013805] node 0: [mem 0x0000000100000000-0x00000004817fffff]
[ 0.013807] Initmem setup node 0 [mem 0x0000000000001000-0x00000004817fffff]
[ 0.013811] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.013812] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.013833] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.016186] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.016601] On node 0, zone DMA32: 45579 pages in unavailable ranges
[ 0.017117] On node 0, zone Normal: 31232 pages in unavailable ranges
[ 0.017367] On node 0, zone Normal: 26624 pages in unavailable ranges
[ 0.017375] Reserving Intel graphics memory at [mem 0x7a800000-0x7c7fffff]
[ 0.017554] ACPI: PM-Timer IO Port: 0x1808
[ 0.017559] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.017560] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.017561] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.017561] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.017588] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.017590] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.017591] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.017594] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.017595] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.017601] e820: update [mem 0x62260000-0x623ecfff] usable ==> reserved
[ 0.017609] TSC deadline timer available
[ 0.017612] CPU topo: Max. logical packages: 1
[ 0.017613] CPU topo: Max. logical dies: 1
[ 0.017613] CPU topo: Max. dies per package: 1
[ 0.017617] CPU topo: Max. threads per core: 2
[ 0.017617] CPU topo: Num. cores per package: 2
[ 0.017617] CPU topo: Num. threads per package: 4
[ 0.017618] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.017636] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.017638] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.017639] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.017641] PM: hibernation: Registered nosave memory: [mem 0x51a78000-0x51a78fff]
[ 0.017642] PM: hibernation: Registered nosave memory: [mem 0x51a88000-0x51a88fff]
[ 0.017643] PM: hibernation: Registered nosave memory: [mem 0x556ab000-0x556abfff]
[ 0.017644] PM: hibernation: Registered nosave memory: [mem 0x556ac000-0x556acfff]
[ 0.017645] PM: hibernation: Registered nosave memory: [mem 0x62260000-0x623ecfff]
[ 0.017647] PM: hibernation: Registered nosave memory: [mem 0x64df4000-0x6517ffff]
[ 0.017647] PM: hibernation: Registered nosave memory: [mem 0x65180000-0x651c3fff]
[ 0.017648] PM: hibernation: Registered nosave memory: [mem 0x651c4000-0x6f871fff]
[ 0.017648] PM: hibernation: Registered nosave memory: [mem 0x6f872000-0x6fffefff]
[ 0.017649] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x77ffffff]
[ 0.017651] PM: hibernation: Registered nosave memory: [mem 0x78600000-0x7c7fffff]
[ 0.017651] PM: hibernation: Registered nosave memory: [mem 0x7c800000-0xfdffffff]
[ 0.017652] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.017652] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.017653] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.017653] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.017654] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.017654] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.017657] [mem 0x7c800000-0xfdffffff] available for PCI devices
[ 0.017659] Booting paravirtualized kernel on bare hardware
[ 0.017665] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.021885] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.022156] percpu: Embedded 94 pages/cpu s290816 r65536 d28672 u524288
[ 0.022163] pcpu-alloc: s290816 r65536 d28672 u524288 alloc=1*2097152
[ 0.022165] pcpu-alloc: [0] 0 1 2 3
[ 0.022182] Kernel command line: BOOT_IMAGE=/vmlinuz-6.13.0-rc1-00316-gb5f217084ab3 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M cryptomgr.notests
[ 0.022250] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.13.0-rc1-00316-gb5f217084ab3", will be passed to user space.
[ 0.022274] random: crng init done
[ 0.023919] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.024668] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.024715] Fallback order for Node 0: 0
[ 0.024718] Built 1 zonelists, mobility grouping on. Total pages: 4090767
[ 0.024719] Policy zone: Normal
[ 0.024725] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.024732] software IO TLB: area num 4.
[ 0.043406] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.043408] kmemleak: Kernel memory leak detector disabled
[ 0.043435] ftrace: allocating 43092 entries in 169 pages
[ 0.057377] ftrace: allocated 169 pages with 4 groups
[ 0.058042] Dynamic Preempt: voluntary
[ 0.058076] rcu: Preemptible hierarchical RCU implementation.
[ 0.058076] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.058077] Trampoline variant of Tasks RCU enabled.
[ 0.058078] Rude variant of Tasks RCU enabled.
[ 0.058078] Tracing variant of Tasks RCU enabled.
[ 0.058079] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.058079] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.058084] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.058086] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.058087] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.061534] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.061744] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.061913] Console: colour dummy device 80x25
[ 0.061916] printk: legacy console [tty0] enabled
[ 0.061952] ACPI: Core revision 20240827
[ 0.062100] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.062154] APIC: Switch to symmetric I/O mode setup
[ 0.062161] DMAR: Host address width 39
[ 0.062162] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.062167] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.062169] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.062174] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.062176] DMAR: RMRR base: 0x00000064ec2000 end: 0x00000064ee1fff
[ 0.062177] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff
[ 0.062178] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.062179] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.062181] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.062182] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.062184] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.063805] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.063806] x2apic enabled
[ 0.063868] APIC: Switched APIC routing to: cluster x2apic
[ 0.067705] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[ 0.067710] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
[ 0.067741] CPU0: Thermal monitoring enabled (TM1)
[ 0.067778] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.067779] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.067783] process: using mwait in idle threads
[ 0.067786] Spectre V2 : User space: Vulnerable
[ 0.067787] Speculative Store Bypass: Vulnerable
[ 0.067790] SRBDS: Vulnerable
[ 0.067795] GDS: Vulnerable
[ 0.067799] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.067800] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.067801] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.067802] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.067802] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.067803] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.067805] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.067806] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.067806] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.071709] Freeing SMP alternatives memory: 36K
[ 0.071709] pid_max: default: 32768 minimum: 301
[ 0.071709] LSM: initializing lsm=capability,landlock,apparmor,bpf
[ 0.071709] landlock: Up and running.
[ 0.071709] AppArmor: AppArmor initialized
[ 0.071709] LSM support for eBPF active
[ 0.071709] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.071709] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.071709] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.071709] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.071709] ... version: 4
[ 0.071709] ... bit width: 48
[ 0.071709] ... generic registers: 4
[ 0.071709] ... value mask: 0000ffffffffffff
[ 0.071709] ... max period: 00007fffffffffff
[ 0.071709] ... fixed-purpose events: 3
[ 0.071709] ... event mask: 000000070000000f
[ 0.071709] signal: max sigframe size: 1616
[ 0.071709] Estimated ratio of average max frequency by base frequency (times 1024): 1235
[ 0.071709] rcu: Hierarchical SRCU implementation.
[ 0.071709] rcu: Max phase no-delay instances is 1000.
[ 0.071709] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.071709] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.071709] smp: Bringing up secondary CPUs ...
[ 0.071709] smpboot: x86: Booting SMP configuration:
[ 0.071709] .... node #0, CPUs: #1 #2 #3
[ 0.071709] smp: Brought up 1 node, 4 CPUs
[ 0.071709] smpboot: Total of 4 processors activated (23199.08 BogoMIPS)
[ 0.091733] node 0 deferred pages initialised in 24ms
[ 0.093022] Memory: 15906080K/16363068K available (14336K kernel code, 2559K rwdata, 10216K rodata, 2880K init, 6356K bss, 446260K reserved, 0K cma-reserved)
[ 0.093022] devtmpfs: initialized
[ 0.093022] x86/mm: Memory block size: 128MB
[ 0.093022] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes)
[ 0.093022] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes)
[ 0.096218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.096225] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.096275] pinctrl core: initialized pinctrl subsystem
[ 0.096725] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.096920] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.097037] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.097163] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.097180] audit: initializing netlink subsys (disabled)
[ 0.097197] audit: type=2000 audit(1733554025.028:1): state=initialized audit_enabled=0 res=1
[ 0.097197] thermal_sys: Registered thermal governor 'fair_share'
[ 0.097197] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.097197] thermal_sys: Registered thermal governor 'step_wise'
[ 0.097197] thermal_sys: Registered thermal governor 'user_space'
[ 0.097197] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.097197] cpuidle: using governor ladder
[ 0.097197] cpuidle: using governor menu
[ 0.097197] Simple Boot Flag at 0x47 set to 0x80
[ 0.097197] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.097197] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.097197] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.097197] PCI: Using configuration type 1 for base access
[ 0.097197] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.097197] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.097197] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.097197] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.097197] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.097197] ACPI: Added _OSI(Module Device)
[ 0.097197] ACPI: Added _OSI(Processor Device)
[ 0.097197] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.097197] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.129489] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.134053] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.140443] ACPI: Dynamic OEM Table Load:
[ 0.140449] ACPI: SSDT 0xFFFF9F5F818BCC00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.140452] ACPI: Dynamic OEM Table Load:
[ 0.140452] ACPI: SSDT 0xFFFF9F5F81821800 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.141297] ACPI: Dynamic OEM Table Load:
[ 0.141302] ACPI: SSDT 0xFFFF9F5F81824000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.142319] ACPI: Dynamic OEM Table Load:
[ 0.142323] ACPI: SSDT 0xFFFF9F5F818FC000 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.144506] ACPI: EC: EC started
[ 0.144507] ACPI: EC: interrupt blocked
[ 0.149173] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.149175] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.149177] ACPI: Interpreter enabled
[ 0.149212] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.149215] ACPI: Using IOAPIC for interrupt routing
[ 0.149248] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.149249] PCI: Using E820 reservations for host bridge windows
[ 0.149763] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.154398] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[ 0.154655] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[ 0.154911] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[ 0.155162] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[ 0.155411] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[ 0.155661] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[ 0.156293] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[ 0.156544] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 0.156794] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[ 0.157048] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[ 0.157297] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[ 0.157547] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[ 0.157800] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[ 0.158060] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[ 0.158316] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[ 0.158566] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[ 0.158820] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[ 0.159870] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[ 0.160121] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[ 0.160371] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[ 0.178928] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.178934] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.179088] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.179372] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.179374] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.180093] PCI host bridge to bus 0000:00
[ 0.180096] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.180098] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.180100] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.180101] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window]
[ 0.180102] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.180104] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.180118] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 conventional PCI endpoint
[ 0.180179] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[ 0.180186] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit]
[ 0.180190] pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.180194] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f]
[ 0.180207] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.180331] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint
[ 0.180338] pci 0000:00:04.0: BAR 0 [mem 0xdc320000-0xdc327fff 64bit]
[ 0.180580] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.180596] pci 0000:00:14.0: BAR 0 [mem 0xdc310000-0xdc31ffff 64bit]
[ 0.180649] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.181092] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint
[ 0.181106] pci 0000:00:14.2: BAR 0 [mem 0xdc334000-0xdc334fff 64bit]
[ 0.181235] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint
[ 0.181262] pci 0000:00:15.0: BAR 0 [mem 0xdc333000-0xdc333fff 64bit]
[ 0.181574] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint
[ 0.181602] pci 0000:00:15.1: BAR 0 [mem 0xdc332000-0xdc332fff 64bit]
[ 0.181887] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint
[ 0.181900] pci 0000:00:16.0: BAR 0 [mem 0xdc331000-0xdc331fff 64bit]
[ 0.181942] pci 0000:00:16.0: PME# supported from D3hot
[ 0.182232] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port
[ 0.182248] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.182254] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.182260] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.182301] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.182679] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port
[ 0.182700] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.182705] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.182761] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.183163] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port
[ 0.183180] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 0.183183] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.183231] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.183629] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100 conventional PCI endpoint
[ 0.183909] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint
[ 0.183921] pci 0000:00:1f.2: BAR 0 [mem 0xdc32c000-0xdc32ffff]
[ 0.184118] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint
[ 0.184137] pci 0000:00:1f.3: BAR 0 [mem 0xdc328000-0xdc32bfff 64bit]
[ 0.184159] pci 0000:00:1f.3: BAR 4 [mem 0xdc300000-0xdc30ffff 64bit]
[ 0.184199] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.184733] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.184791] pci 0000:00:1f.4: BAR 0 [mem 0xdc330000-0xdc3300ff 64bit]
[ 0.184862] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f]
[ 0.185152] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.185479] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000 PCIe Endpoint
[ 0.185693] pci 0000:3a:00.0: BAR 0 [mem 0xdc000000-0xdc1fffff 64bit]
[ 0.186891] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 0.188555] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.188636] pci 0000:3b:00.0: [1c5c:1284] type 00 class 0x010802 PCIe Endpoint
[ 0.188655] pci 0000:3b:00.0: BAR 0 [mem 0xdc200000-0xdc203fff 64bit]
[ 0.188764] pci 0000:3b:00.0: PME# supported from D0 D1 D3hot
[ 0.189086] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 0.192328] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.192374] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.192418] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.192461] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.192504] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.192547] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.192590] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.192632] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.202892] ACPI: EC: interrupt unblocked
[ 0.202893] ACPI: EC: event unblocked
[ 0.202899] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.202900] ACPI: EC: GPE=0x14
[ 0.202901] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.202903] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.203722] iommu: Default domain type: Translated
[ 0.203722] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.203840] pps_core: LinuxPPS API ver. 1 registered
[ 0.203841] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.203846] PTP clock support registered
[ 0.203859] EDAC MC: Ver: 3.0.0
[ 0.204140] efivars: Registered efivars operations
[ 0.204140] NetLabel: Initializing
[ 0.204140] NetLabel: domain hash size = 128
[ 0.204140] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.204140] NetLabel: unlabeled traffic allowed by default
[ 0.204140] PCI: Using ACPI for IRQ routing
[ 0.231251] PCI: pci_cache_line_size set to 64 bytes
[ 0.231630] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.231632] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.231632] e820: reserve RAM buffer [mem 0x51a78018-0x53ffffff]
[ 0.231634] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff]
[ 0.231635] e820: reserve RAM buffer [mem 0x62260000-0x63ffffff]
[ 0.231636] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff]
[ 0.231637] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff]
[ 0.231637] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff]
[ 0.231666] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.231666] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.231666] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.231666] vgaarb: loaded
[ 0.231731] clocksource: Switched to clocksource tsc-early
[ 0.231834] VFS: Disk quotas dquot_6.6.0
[ 0.231842] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.231923] AppArmor: AppArmor Filesystem Enabled
[ 0.231933] pnp: PnP ACPI init
[ 0.232143] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.232145] system 00:00: [io 0xffff] has been reserved
[ 0.232147] system 00:00: [io 0xffff] has been reserved
[ 0.232148] system 00:00: [io 0xffff] has been reserved
[ 0.232149] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.232150] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.232265] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.232601] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.232603] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.232604] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.232606] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.232607] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.232608] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.232610] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.232611] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.232613] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.232614] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.232647] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.232649] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.232651] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.232652] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.232653] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.232655] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.232656] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.232899] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.233822] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.233824] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.237280] pnp: PnP ACPI: found 9 devices
[ 0.242624] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.242670] NET: Registered PF_INET protocol family
[ 0.242787] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.253922] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.253942] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.253997] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.254198] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.254400] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.254467] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.254535] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.254603] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.254686] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.254691] NET: Registered PF_XDP protocol family
[ 0.254700] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
[ 0.254710] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned
[ 0.254713] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.254715] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.254719] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.254721] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.254725] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.254728] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.254734] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 0.254736] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.254741] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.254743] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.254744] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.254745] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window]
[ 0.254746] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.254748] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.254749] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 0.254750] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.254751] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
[ 0.254752] pci_bus 0000:3b: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.255337] PCI: CLS 0 bytes, default 64
[ 0.255381] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint
[ 0.255440] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[ 0.255669] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
[ 0.255672] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
[ 0.255681] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.255682] software IO TLB: mapped [mem 0x000000005e260000-0x0000000062260000] (64MB)
[ 0.255719] Unpacking initramfs...
[ 0.255735] sgx: EPC section 0x70200000-0x75f7ffff
[ 0.257090] Initialise system trusted keyrings
[ 0.257114] Key type blacklist registered
[ 0.257198] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.257221] zbud: loaded
[ 0.257368] fuse: init (API version 7.41)
[ 0.257504] Key type asymmetric registered
[ 0.257506] Asymmetric key parser 'x509' registered
[ 0.275710] Freeing initrd memory: 11308K
[ 0.278691] alg: self-tests disabled
[ 0.278755] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.278808] io scheduler mq-deadline registered
[ 0.282017] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.282590] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.284718] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.284721] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 0.284870] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.285473] hpet_acpi_add: no address or irqs in _CRS
[ 0.297018] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
[ 0.332775] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.333038] i8042: Warning: Keylock active
[ 0.335258] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.335263] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.335407] mousedev: PS/2 mouse device common for all mice
[ 0.335421] rtc_cmos 00:01: RTC can wake from S4
[ 0.336114] rtc_cmos 00:01: registered as rtc0
[ 0.336268] rtc_cmos 00:01: setting system clock to 2024-12-07T06:47:06 UTC (1733554026)
[ 0.336289] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 0.336408] intel_pstate: Intel P-state driver initializing
[ 0.336551] intel_pstate: HWP enabled
[ 0.336762] efifb: probing for efifb
[ 0.336772] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 0.336773] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 0.336774] efifb: scrolling: redraw
[ 0.336775] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.336857] Console: switching to colour frame buffer device 200x56
[ 0.336997] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.340666] fb0: EFI VGA frame buffer device
[ 0.340790] NET: Registered PF_INET6 protocol family
[ 0.344608] Segment Routing with IPv6
[ 0.344622] In-situ OAM (IOAM) with IPv6
[ 0.344646] mip6: Mobile IPv6
[ 0.344650] NET: Registered PF_PACKET protocol family
[ 0.344673] mpls_gso: MPLS GSO support
[ 0.344840] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.344866] microcode: Current revision: 0x000000f6
[ 0.344867] microcode: Updated early from: 0x000000f0
[ 0.344923] IPI shorthand broadcast: enabled
[ 0.345812] sched_clock: Marking stable (339072794, 5839356)->(354582985, -9670835)
[ 0.345919] registered taskstats version 1
[ 0.345982] Loading compiled-in X.509 certificates
[ 0.347301] Demotion targets for Node 0: null
[ 0.347327] Key type .fscrypt registered
[ 0.347328] Key type fscrypt-provisioning registered
[ 0.351903] cryptd: max_cpu_qlen set to 1000
[ 0.352586] AES CTR mode by8 optimization enabled
[ 0.361376] Key type encrypted registered
[ 0.361380] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.361773] RAS: Correctable Errors collector initialized.
[ 0.370304] clk: Disabling unused clocks
[ 0.371119] Freeing unused decrypted memory: 2036K
[ 0.371464] Freeing unused kernel image (initmem) memory: 2880K
[ 0.371479] Write protecting the kernel read-only data: 24576k
[ 0.371639] Freeing unused kernel image (rodata/data gap) memory: 24K
[ 0.382266] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.382271] Run /init as init process
[ 0.382272] with arguments:
[ 0.382274] /init
[ 0.382274] with environment:
[ 0.382275] HOME=/
[ 0.382276] TERM=linux
[ 0.382276] BOOT_IMAGE=/vmlinuz-6.13.0-rc1-00316-gb5f217084ab3
[ 0.460752] nvme nvme0: pci function 0000:3b:00.0
[ 0.480033] nvme nvme0: 4/0/0 default/read/poll queues
[ 0.487311] nvme0n1: p1 p2 p3 p4
[ 0.531123] device-mapper: uevent: version 1.0.3
[ 0.531268] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 1.282169] tsc: Refined TSC clocksource calibration: 2904.008 MHz
[ 1.282191] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc0d988f1, max_idle_ns: 440795328788 ns
[ 1.282253] clocksource: Switched to clocksource tsc
[ 7.923973] PM: Image not found (code -22)
[ 7.989258] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none.
[ 8.127712] systemd[1]: Inserted module 'autofs4'
[ 8.169554] systemd[1]: systemd 257~rc3-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 8.169572] systemd[1]: Detected architecture x86-64.
[ 8.172757] systemd[1]: Hostname set to <abreu>.
[ 8.450994] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 8.487211] systemd-sysv-generator[372]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 8.487216] systemd-sysv-generator[372]: Please update package to include a native systemd unit file.
[ 8.487218] systemd-sysv-generator[372]: ! This compatibility logic is deprecated, expect removal soon. !
[ 8.600174] systemd[1]: Queued start job for default target graphical.target.
[ 8.652322] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 8.653212] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 8.653976] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice.
[ 8.654719] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 8.655196] systemd[1]: Created slice user.slice - User and Session Slice.
[ 8.655337] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 8.655433] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 8.655791] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 8.655851] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
[ 8.655867] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8...
[ 8.655879] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5...
[ 8.655897] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653...
[ 8.655952] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 8.656020] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 8.656052] systemd[1]: Reached target paths.target - Path Units.
[ 8.656099] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 8.656128] systemd[1]: Reached target slices.target - Slice Units.
[ 8.656208] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 8.660255] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 8.662906] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 8.663180] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 8.663447] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 8.663744] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 8.663898] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 8.663957] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 8.664188] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 8.664361] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 8.667351] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 8.669502] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 8.672702] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
[ 8.678106] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 8.682104] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 8.690111] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 8.692009] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 8.700824] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 8.702256] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 8.706384] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 8.706506] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 8.706581] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 8.708784] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 8.712711] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 8.712753] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 8.713226] pstore: Using crash dump compression: deflate
[ 8.717354] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 8.717411] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 8.718396] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 8.721041] pstore: Registered efi_pstore as persistent store backend
[ 8.722034] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 8.724100] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 8.724208] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 8.724296] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[ 8.724385] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 8.724472] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 8.725968] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 8.726311] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 8.730042] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 8.731264] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 8.732058] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 8.735777] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 8.742719] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 8.744834] ACPI: bus type drm_connector registered
[ 8.750852] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 8.755052] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 8.755320] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 8.755698] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 8.755924] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 8.757959] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 8.759298] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 8.759417] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 8.764315] lp: driver loaded but no devices found
[ 8.767569] ppdev: user-space parallel port driver
[ 8.771139] systemd-journald[386]: Collecting audit messages is disabled.
[ 8.771607] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w. Quota mode: none.
[ 8.772606] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 8.772986] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 8.773041] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 8.774674] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 8.774733] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 8.779807] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 8.780737] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 8.786677] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 8.786846] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[ 8.788214] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 8.796177] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ 8.798417] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 8.802526] systemd[1]: Started systemd-journald.service - Journal Service.
[ 8.821771] systemd-journald[386]: Received client request to flush runtime journal.
[ 8.928744] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input12
[ 8.937825] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 8.939297] ACPI: AC: AC Adapter [AC] (off-line)
[ 8.942031] ACPI: button: Lid Switch [LID0]
[ 8.942074] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input13
[ 8.942201] ACPI: button: Power Button [PBTN]
[ 8.942247] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input14
[ 8.942282] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 8.942316] ACPI: button: Sleep Button [SBTN]
[ 8.942525] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input15
[ 8.942811] ACPI: button: Power Button [PWRF]
[ 8.942888] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 8.944652] ACPI: bus type USB registered
[ 8.944678] usbcore: registered new interface driver usbfs
[ 8.944686] usbcore: registered new interface driver hub
[ 8.944695] usbcore: registered new device driver usb
[ 8.972677] wmi_bus wmi_bus-PNP0C14:01: [Firmware Bug]: WQBC data block query control method not found
[ 8.975934] Consider using thermal netlink events interface
[ 8.991530] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input16
[ 9.020223] ACPI: battery: Slot [BAT0] (battery present)
[ 9.058414] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS
[ 9.072950] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 9.074595] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 9.076041] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 9.076508] input: Intel HID events as /devices/platform/INT33D5:00/input/input18
[ 9.078935] intel_pmc_core INT33A1:00: initialized
[ 9.080794] intel-hid INT33D5:00: platform supports 5 button array
[ 9.082189] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 9.082197] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 9.082210] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 9.082402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
[ 9.082407] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.082410] usb usb1: Product: xHCI Host Controller
[ 9.082412] usb usb1: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[ 9.082415] usb usb1: SerialNumber: 0000:00:14.0
[ 9.084987] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input19
[ 9.090522] hub 1-0:1.0: USB hub found
[ 9.090645] hub 1-0:1.0: 12 ports detected
[ 9.097576] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 9.103234] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 9.107829] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 9.121475] intel_rapl_common: Found RAPL domain package
[ 9.121480] intel_rapl_common: Found RAPL domain dram
[ 9.122309] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 9.150819] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
[ 9.150831] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.150837] usb usb2: Product: xHCI Host Controller
[ 9.150841] usb usb2: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[ 9.150845] usb usb2: SerialNumber: 0000:00:14.0
[ 9.151881] hub 2-0:1.0: USB hub found
[ 9.151906] hub 2-0:1.0: 6 ports detected
[ 9.369848] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 9.463458] Setting dangerous option enable_guc - tainting kernel
[ 9.463465] Setting dangerous option enable_fbc - tainting kernel
[ 9.463907] hid: raw HID events driver (C) Jiri Kosina
[ 9.464189] stackdepot: allocating hash table of 1048576 entries via kvcalloc
[ 9.469415] input: PC Speaker as /devices/platform/pcspkr/input/input20
[ 9.470652] i915 0000:00:02.0: [drm] Found kabylake/ult (device ID 5916) display version 9.00 stepping B0
[ 9.471367] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 9.471394] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 9.471592] Console: switching to colour dummy device 80x25
[ 9.471637] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 9.522107] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.525010] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 9.531025] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[ 9.531029] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.541402] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.545136] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.545271] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 9.547423] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 9.559835] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 9.559841] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 9.559842] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 9.559843] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 9.559844] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 9.559845] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 9.573705] intel_rapl_common: Found RAPL domain package
[ 9.573709] intel_rapl_common: Found RAPL domain core
[ 9.573710] intel_rapl_common: Found RAPL domain uncore
[ 9.573711] intel_rapl_common: Found RAPL domain dram
[ 9.573712] intel_rapl_common: Found RAPL domain psys
[ 9.594108] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[ 9.594124] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[ 9.623777] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[ 9.623784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[ 9.623787] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[ 9.637932] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 9.652381] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
[ 9.654000] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.654657] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21
[ 9.658840] iTCO_vendor_support: vendor-support=0
[ 9.686013] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 9.689567] fbcon: i915drmfb (fb0) is primary device
[ 9.689859] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 9.702169] Console: switching to colour frame buffer device 200x56
[ 9.721366] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input22
[ 9.721456] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input23
[ 9.722649] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 9.723273] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 9.733122] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.741231] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input25
[ 9.749780] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 9.768499] snd_hda_codec_realtek hdaudioC0D0: ALC3246: picked fixup (pin match)
[ 9.782397] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 9.788145] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 9.798832] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none.
[ 9.806281] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.806288] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.806291] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.806294] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.806296] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.806297] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 9.806300] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 9.806302] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 9.835938] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[ 9.835943] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 9.835945] usb 1-4: Product: Touchscreen
[ 9.835946] usb 1-4: Manufacturer: ELAN
[ 9.881970] ACPI: battery: new extension: Dell Primary Battery Extension
[ 9.891006] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input27
[ 9.891086] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input28
[ 9.891159] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 9.957868] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 9.964259] audit: type=1400 audit(1733554036.121:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=559 comm="apparmor_parser"
[ 9.964798] audit: type=1400 audit(1733554036.121:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=560 comm="apparmor_parser"
[ 9.964802] audit: type=1400 audit(1733554036.121:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=560 comm="apparmor_parser"
[ 9.965551] audit: type=1400 audit(1733554036.121:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=562 comm="apparmor_parser"
[ 9.965555] audit: type=1400 audit(1733554036.121:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=562 comm="apparmor_parser"
[ 9.965557] audit: type=1400 audit(1733554036.121:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=562 comm="apparmor_parser"
[ 9.971305] audit: type=1400 audit(1733554036.129:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=566 comm="apparmor_parser"
[ 9.971519] audit: type=1400 audit(1733554036.129:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/charon" pid=568 comm="apparmor_parser"
[ 9.972977] audit: type=1400 audit(1733554036.129:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="msmtp" pid=565 comm="apparmor_parser"
[ 9.972982] audit: type=1400 audit(1733554036.129:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="msmtp//helpers" pid=565 comm="apparmor_parser"
[ 10.030164] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 10.030172] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 10.030730] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[ 10.050142] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[ 10.050506] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 10.050578] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 10.050628] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[ 10.051662] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
[ 10.105764] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[ 10.166756] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[ 10.166762] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 10.166765] usb 1-5: Product: Integrated_Webcam_HD
[ 10.166767] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[ 10.200270] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 10.264548] mc: Linux media interface: v0.10
[ 10.281792] ath: EEPROM regdomain: 0x6c
[ 10.281796] ath: EEPROM indicates we should expect a direct regpair map
[ 10.281798] ath: Country alpha2 being used: 00
[ 10.281799] ath: Regpair used: 0x6c
[ 10.283218] nvme nvme0: using unchecked data buffer
[ 10.291064] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 10.293809] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input34
[ 10.297994] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input35
[ 10.298244] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input36
[ 10.301969] hid-multitouch 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 10.302019] usbcore: registered new interface driver usbhid
[ 10.302021] usbhid: USB HID core driver
[ 10.317127] Bluetooth: Core ver 2.22
[ 10.317157] NET: Registered PF_BLUETOOTH protocol family
[ 10.317159] Bluetooth: HCI device and connection manager initialized
[ 10.317557] Bluetooth: HCI socket layer initialized
[ 10.317560] Bluetooth: L2CAP socket layer initialized
[ 10.317565] Bluetooth: SCO socket layer initialized
[ 10.322214] videodev: Linux video capture interface: v2.00
[ 10.373241] usbcore: registered new interface driver btusb
[ 10.376282] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[ 10.377869] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 10.377875] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 10.740193] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 10.763631] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 11.153822] usbcore: registered new interface driver uvcvideo
[ 11.318883] PPP generic driver version 2.4.2
[ 11.320304] NET: Registered PF_PPPOX protocol family
[ 11.333803] l2tp_core: L2TP core driver, V2.0
[ 11.334264] Initializing XFRM netlink socket
[ 11.339228] l2tp_netlink: L2TP netlink interface
[ 11.343393] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.355067] IPsec XFRM device driver
[ 13.810882] rfkill: input handler disabled
[ 16.292738] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[ 16.292743] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[ 16.294335] wlp58s0: authenticated
[ 16.297888] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[ 16.330681] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[ 16.333304] wlp58s0: associated
[ 16.366951] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[ 18.120352] rfkill: input handler enabled
[ 20.707757] rfkill: input handler disabled
[ 4102.251299] systemd-sysv-generator[6501]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 4102.251316] systemd-sysv-generator[6501]: Please update package to include a native systemd unit file.
[ 4102.251323] systemd-sysv-generator[6501]: ! This compatibility logic is deprecated, expect removal soon. !
[11448.783099] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[11450.311148] PM: suspend entry (deep)
[11450.339251] Filesystems sync: 0.028 seconds
[11450.355874] Freezing user space processes
[11450.357613] Freezing user space processes completed (elapsed 0.001 seconds)
[11450.357625] OOM killer disabled.
[11450.357628] Freezing remaining freezable tasks
[11450.359162] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[11450.359281] printk: Suspending console(s) (use no_console_suspend to debug)
[11450.963371] ACPI: EC: interrupt blocked
[11450.993606] ACPI: PM: Preparing to enter system sleep state S3
[11451.003719] ACPI: EC: event blocked
[11451.003724] ACPI: EC: EC stopped
[11451.003726] ACPI: PM: Saving platform NVS memory
[11451.006966] Disabling non-boot CPUs ...
[11451.008884] smpboot: CPU 3 is now offline
[11451.013031] smpboot: CPU 2 is now offline
[11451.018213] smpboot: CPU 1 is now offline
[11451.025609] ACPI: PM: Low-level resume complete
[11451.025652] ACPI: EC: EC started
[11451.025653] ACPI: PM: Restoring platform NVS memory
[11451.027603] Enabling non-boot CPUs ...
[11451.027627] smpboot: Booting Node 0 Processor 1 APIC 0x2
[11451.028297] CPU1 is up
[11451.028312] smpboot: Booting Node 0 Processor 2 APIC 0x1
[11451.029021] CPU2 is up
[11451.029038] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11451.029760] CPU3 is up
[11451.032663] ACPI: PM: Waking up from system sleep state S3
[11451.086889] ACPI: EC: interrupt unblocked
[11451.103601] ACPI: EC: event unblocked
[11451.105879] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[11451.105890] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[11451.116200] nvme nvme0: 4/0/0 default/read/poll queues
[11451.132235] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[11451.132240] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[11451.132242] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[11451.353825] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[11451.365622] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[11451.532985] atkbd_receive_byte: 19 callbacks suppressed
[11451.532988] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[11451.613778] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[11451.869851] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[11452.008623] OOM killer enabled.
[11452.008625] Restarting tasks ... done.
[11452.010217] random: crng reseeded on system resumption
[11452.066441] PM: suspend exit
[11452.188029] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[11452.212926] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[11452.212931] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[11452.555767] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[11452.586222] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[11452.615376] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[11457.693797] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[11457.693804] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[11457.695720] wlp58s0: authenticated
[11457.697541] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[11457.736212] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=2)
[11457.738680] wlp58s0: associated
[11457.773707] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[12853.826454] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[12855.394040] PM: suspend entry (deep)
[12855.404547] Filesystems sync: 0.010 seconds
[12855.410188] Freezing user space processes
[12855.411865] Freezing user space processes completed (elapsed 0.001 seconds)
[12855.411870] OOM killer disabled.
[12855.411871] Freezing remaining freezable tasks
[12855.413249] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[12855.413306] printk: Suspending console(s) (use no_console_suspend to debug)
[12856.026801] ACPI: EC: interrupt blocked
[12856.058238] ACPI: PM: Preparing to enter system sleep state S3
[12856.074879] ACPI: EC: event blocked
[12856.074884] ACPI: EC: EC stopped
[12856.074886] ACPI: PM: Saving platform NVS memory
[12856.078324] Disabling non-boot CPUs ...
[12856.080238] smpboot: CPU 3 is now offline
[12856.084364] smpboot: CPU 2 is now offline
[12856.086743] smpboot: CPU 1 is now offline
[12856.095313] ACPI: PM: Low-level resume complete
[12856.095357] ACPI: EC: EC started
[12856.095357] ACPI: PM: Restoring platform NVS memory
[12856.097308] Enabling non-boot CPUs ...
[12856.097332] smpboot: Booting Node 0 Processor 1 APIC 0x2
[12856.098003] CPU1 is up
[12856.098018] smpboot: Booting Node 0 Processor 2 APIC 0x1
[12856.098782] CPU2 is up
[12856.098797] smpboot: Booting Node 0 Processor 3 APIC 0x3
[12856.099444] CPU3 is up
[12856.102353] ACPI: PM: Waking up from system sleep state S3
[12856.133701] ACPI: EC: interrupt unblocked
[12856.152650] ACPI: EC: event unblocked
[12856.155473] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[12856.155482] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[12856.167846] nvme nvme0: 4/0/0 default/read/poll queues
[12856.180686] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[12856.180691] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[12856.180695] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[12856.390201] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[12856.402822] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[12856.658778] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[12856.914953] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[12857.058326] OOM killer enabled.
[12857.058333] Restarting tasks ... done.
[12857.059276] random: crng reseeded on system resumption
[12857.190515] PM: suspend exit
[12857.269225] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[12857.269241] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[12857.625327] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[12857.648103] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[12857.684591] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[12920.061358] PM: suspend entry (deep)
[12920.073756] Filesystems sync: 0.012 seconds
[12920.078430] Freezing user space processes
[12920.079957] Freezing user space processes completed (elapsed 0.001 seconds)
[12920.079960] OOM killer disabled.
[12920.079961] Freezing remaining freezable tasks
[12920.081297] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[12920.081350] printk: Suspending console(s) (use no_console_suspend to debug)
[12920.702493] ACPI: EC: interrupt blocked
[12920.733939] ACPI: PM: Preparing to enter system sleep state S3
[12920.744032] ACPI: EC: event blocked
[12920.744037] ACPI: EC: EC stopped
[12920.744038] ACPI: PM: Saving platform NVS memory
[12920.747488] Disabling non-boot CPUs ...
[12920.749414] smpboot: CPU 3 is now offline
[12920.753856] smpboot: CPU 2 is now offline
[12920.756168] smpboot: CPU 1 is now offline
[12920.763687] ACPI: PM: Low-level resume complete
[12920.763730] ACPI: EC: EC started
[12920.763730] ACPI: PM: Restoring platform NVS memory
[12920.765677] Enabling non-boot CPUs ...
[12920.765701] smpboot: Booting Node 0 Processor 1 APIC 0x2
[12920.766377] CPU1 is up
[12920.766393] smpboot: Booting Node 0 Processor 2 APIC 0x1
[12920.767103] CPU2 is up
[12920.767121] smpboot: Booting Node 0 Processor 3 APIC 0x3
[12920.767786] CPU3 is up
[12920.770681] ACPI: PM: Waking up from system sleep state S3
[12920.801756] ACPI: EC: interrupt unblocked
[12920.819998] ACPI: EC: event unblocked
[12920.822832] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[12920.822844] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[12920.832568] nvme nvme0: 4/0/0 default/read/poll queues
[12920.848436] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[12920.848440] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[12920.848442] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[12921.061906] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[12921.070128] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[12921.326146] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[12921.582131] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[12921.721545] OOM killer enabled.
[12921.721547] Restarting tasks ... done.
[12921.725887] random: crng reseeded on system resumption
[12921.839095] PM: suspend exit
[12921.923683] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[12921.923690] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[12922.279506] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[12922.302699] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[12922.305411] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[12927.586360] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[12927.586383] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[12927.589144] wlp58s0: authenticated
[12927.593867] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[12927.627305] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[12927.630205] wlp58s0: associated
[12927.694147] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[12930.278831] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Upstream Port
[12930.278906] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[12930.278930] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[12930.278955] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[12930.278983] pci 0000:01:00.0: enabling Extended Tags
[12930.279883] pci 0000:01:00.0: supports D1 D2
[12930.279894] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[12930.280032] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[12930.369465] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[12930.369557] pci 0000:02:00.0: PCI bridge to [bus 03]
[12930.369588] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[12930.369649] pci 0000:02:00.0: enabling Extended Tags
[12930.369912] pci 0000:02:00.0: supports D1 D2
[12930.369923] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[12930.370577] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[12930.370646] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[12930.370667] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[12930.370691] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[12930.370728] pci 0000:02:01.0: enabling Extended Tags
[12930.370950] pci 0000:02:01.0: supports D1 D2
[12930.370960] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[12930.371679] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[12930.371758] pci 0000:02:02.0: PCI bridge to [bus 39]
[12930.371787] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[12930.371848] pci 0000:02:02.0: enabling Extended Tags
[12930.372075] pci 0000:02:02.0: supports D1 D2
[12930.372085] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[12930.376843] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[12930.377508] pci 0000:02:00.0: PCI bridge to [bus 03]
[12930.378091] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[12930.378407] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[12930.378462] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[12930.378597] pci 0000:39:00.0: enabling Extended Tags
[12930.378847] pci 0000:39:00.0: supports D1 D2
[12930.378855] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[12930.379023] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[12930.385497] pci 0000:02:02.0: PCI bridge to [bus 39]
[12930.385605] pci_bus 0000:02: Allocating resources
[12930.385649] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[12930.385668] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[12930.385683] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[12930.385702] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[12930.385722] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[12930.385732] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[12930.385743] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[12930.385752] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[12930.385776] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[12930.385829] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[12930.385840] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[12930.385849] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[12930.385858] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[12930.385866] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[12930.385883] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[12930.385893] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[12930.385904] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[12930.385913] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[12930.385920] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[12930.385928] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[12930.385939] pci 0000:02:00.0: PCI bridge to [bus 03]
[12930.385955] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[12930.385982] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[12930.385996] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[12930.386010] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[12930.386029] pci 0000:02:02.0: PCI bridge to [bus 39]
[12930.386043] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[12930.386065] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[12930.386080] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[12930.386095] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[12930.399244] xhci_hcd 0000:39:00.0: xHCI Host Controller
[12930.399297] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[12930.400923] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[12930.402897] xhci_hcd 0000:39:00.0: xHCI Host Controller
[12930.402931] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[12930.402969] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[12930.403219] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
[12930.403246] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[12930.403266] usb usb3: Product: xHCI Host Controller
[12930.403275] usb usb3: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[12930.403293] usb usb3: SerialNumber: 0000:39:00.0
[12930.405561] hub 3-0:1.0: USB hub found
[12930.405917] hub 3-0:1.0: 2 ports detected
[12930.413602] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
[12930.413626] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[12930.413637] usb usb4: Product: xHCI Host Controller
[12930.413646] usb usb4: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[12930.413655] usb usb4: SerialNumber: 0000:39:00.0
[12930.414776] hub 4-0:1.0: USB hub found
[12930.414819] hub 4-0:1.0: 2 ports detected
[12930.418469] pci_bus 0000:02: Allocating resources
[12930.418523] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[12930.418546] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[12930.418559] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[12930.418577] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[12930.418595] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[12930.418605] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[12930.418616] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[12930.418625] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[12930.418647] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[12930.418657] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[12930.418668] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[12930.418678] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[12930.418687] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[12930.418696] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[12930.418713] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[12930.418723] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[12930.418734] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[12930.418743] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[12930.418752] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[12930.418760] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[12930.661840] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[12930.803756] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[12930.803785] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12930.803798] usb 3-1: Product: USB2.0 Hub
[12930.803805] usb 3-1: Manufacturer: VIA Labs, Inc.
[12930.803813] usb 3-1: SerialNumber: 000000000
[12930.808453] hub 3-1:1.0: USB hub found
[12930.808611] hub 3-1:1.0: 5 ports detected
[12930.934228] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[12930.981634] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[12930.981660] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12930.981671] usb 4-1: Product: USB3.0 Hub
[12930.981679] usb 4-1: Manufacturer: VIA Labs, Inc.
[12930.981687] usb 4-1: SerialNumber: 000000000
[12930.985199] hub 4-1:1.0: USB hub found
[12930.985459] hub 4-1:1.0: 4 ports detected
[12931.533848] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[12931.672400] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[12931.672426] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12931.672442] usb 3-1.1: Product: USB2.0 Hub
[12931.672448] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[12931.672461] usb 3-1.1: SerialNumber: 000000000
[12931.674648] hub 3-1.1:1.0: USB hub found
[12931.674863] hub 3-1.1:1.0: 4 ports detected
[12931.768457] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[12931.827842] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[12931.827870] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12931.827887] usb 4-1.1: Product: USB3.0 Hub
[12931.827893] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[12931.827906] usb 4-1.1: SerialNumber: 000000000
[12931.877858] hub 4-1.1:1.0: USB hub found
[12931.878203] hub 4-1.1:1.0: 4 ports detected
[12931.945831] usb 3-1.2: new high-speed USB device number 4 using xhci_hcd
[12932.103239] usb 3-1.2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41
[12932.103267] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12932.103284] usb 3-1.2: Product: 4-Port USB 2.0 Hub
[12932.103289] usb 3-1.2: Manufacturer: Generic
[12932.107762] hub 3-1.2:1.0: USB hub found
[12932.109331] hub 3-1.2:1.0: 4 ports detected
[12932.162459] usb 4-1.2: new SuperSpeed USB device number 4 using xhci_hcd
[12932.193380] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41
[12932.193402] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12932.193418] usb 4-1.2: Product: 4-Port USB 3.0 Hub
[12932.193424] usb 4-1.2: Manufacturer: Generic
[12932.203135] hub 4-1.2:1.0: USB hub found
[12932.204627] hub 4-1.2:1.0: 2 ports detected
[12932.257815] usb 3-1.5: new high-speed USB device number 5 using xhci_hcd
[12932.347411] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[12932.347434] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12932.347441] usb 3-1.5: Product: USB Billboard Device
[12932.347455] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[12932.347461] usb 3-1.5: SerialNumber: 0000000000000001
[12932.417992] usb 4-1.4: new SuperSpeed USB device number 5 using xhci_hcd
[12932.436198] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[12932.436222] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12932.436229] usb 4-1.4: Product: Mass Storage Device
[12932.436244] usb 4-1.4: Manufacturer: Generic
[12932.436249] usb 4-1.4: SerialNumber: 058F84688461
[12932.505826] usb 3-1.1.3: new high-speed USB device number 6 using xhci_hcd
[12932.673235] SCSI subsystem initialized
[12932.681669] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[12932.682365] scsi host0: usb-storage 4-1.4:1.0
[12932.683498] usbcore: registered new interface driver usb-storage
[12933.253802] usb 3-1.2.3: new low-speed USB device number 7 using xhci_hcd
[12933.365242] usb 3-1.2.3: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[12933.365269] usb 3-1.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[12933.365285] usb 3-1.2.3: Product: Dell KB216 Wired Keyboard
[12933.377341] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.0/0003:413C:2113.0003/input/input41
[12933.429938] usb 4-1.1.3: new SuperSpeed USB device number 6 using xhci_hcd
[12933.446884] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[12933.446901] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[12933.446909] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[12933.446915] usb 4-1.1.3: Manufacturer: Realtek
[12933.446920] usb 4-1.1.3: SerialNumber: 000001
[12933.499091] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.2.3/input0
[12933.507868] usbcore: registered new device driver r8152-cfgselector
[12933.508864] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1/0003:413C:2113.0004/input/input42
[12933.562336] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1/0003:413C:2113.0004/input/input43
[12933.562917] hid-generic 0003:413C:2113.0004: input,hidraw3: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.2.3/input1
[12933.586247] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 6 using xhci_hcd
[12933.646579] r8152 4-1.1.3:1.0 eth0: v1.12.13
[12933.646625] usbcore: registered new interface driver r8152
[12933.652583] usbcore: registered new interface driver cdc_ether
[12933.653402] usbcore: registered new interface driver r8153_ecm
[12933.673772] usb 3-1.2.4: new low-speed USB device number 8 using xhci_hcd
[12933.710831] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[12933.711840] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[12933.717336] sd 0:0:0:1: [sda] Media removed, stopped polling
[12933.717716] sd 0:0:0:1: [sda] Attached SCSI removable disk
[12933.718344] sd 0:0:0:0: [sdb] Media removed, stopped polling
[12933.719566] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[12933.783399] usb 3-1.2.4: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[12933.783432] usb 3-1.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[12933.783451] usb 3-1.2.4: Product: USB Optical Mouse
[12933.797563] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.4/3-1.2.4:1.0/0003:1BCF:0005.0005/input/input44
[12933.800568] hid-generic 0003:1BCF:0005.0005: input,hidraw4: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:39:00.0-1.2.4/input0
[12934.021905] r8152 4-1.1.3:1.0 enx00e04ceabc41: renamed from eth0
[12937.252266] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[12957.430278] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[15871.046928] usb 1-1: new full-speed USB device number 5 using xhci_hcd
[15871.254379] usb 1-1: New USB device found, idVendor=047f, idProduct=c037, bcdDevice= 2.05
[15871.254407] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15871.254415] usb 1-1: Product: Plantronics Blackwire 315.1
[15871.254429] usb 1-1: Manufacturer: Plantronics
[15871.254434] usb 1-1: SerialNumber: BD66DC96BEA24BC0A963198223CC9CBC
[15871.345221] input: Plantronics Plantronics Blackwire 315.1 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:047F:C037.0006/input/input45
[15871.399389] input: Plantronics Plantronics Blackwire 315.1 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:047F:C037.0006/input/input46
[15871.419418] input: Plantronics Plantronics Blackwire 315.1 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:047F:C037.0006/input/input47
[15871.419896] hid-generic 0003:047F:C037.0006: input,hiddev1,hidraw5: USB HID v1.11 Device [Plantronics Plantronics Blackwire 315.1] on usb-0000:00:14.0-1/input3
[15872.262986] usb 1-1: Warning! Unlikely big volume range (=9234), cval->res is probably wrong.
[15872.263002] usb 1-1: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/9234/1
[15872.731263] usbcore: registered new interface driver snd-usb-audio
[17506.489780] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier off
[17509.720457] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[17518.331162] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier off
[17521.945730] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[18307.292352] systemd-sysv-generator[27041]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[18307.292364] systemd-sysv-generator[27041]: Please update package to include a native systemd unit file.
[18307.292368] systemd-sysv-generator[27041]: ! This compatibility logic is deprecated, expect removal soon. !
[18509.112181] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier off
[18512.725570] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[20703.475274] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier off
[20707.311916] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[27711.677718] usb 1-1: USB disconnect, device number 5
[27812.782504] usb 4-1.2: USB disconnect, device number 4
[27812.931253] usb 3-1.2: USB disconnect, device number 4
[27812.931259] usb 3-1.2.3: USB disconnect, device number 7
[27813.221613] usb 3-1.2.4: USB disconnect, device number 8
[27819.605577] usb 3-1: USB disconnect, device number 2
[27819.605598] usb 3-1.1: USB disconnect, device number 3
[27819.609152] usb 3-1.5: USB disconnect, device number 5
[27819.695744] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[27819.695802] xhci_hcd 0000:39:00.0: HC died; cleaning up
[27819.695876] r8152 4-1.1.3:1.0 enx00e04ceabc41: Stop submitting intr, status -108
[27819.779574] xhci_hcd 0000:39:00.0: remove, state 1
[27819.779880] usb usb4: USB disconnect, device number 1
[27819.830813] usb 4-1: USB disconnect, device number 2
[27819.830834] usb 4-1.1: USB disconnect, device number 3
[27819.830847] r8152-cfgselector 4-1.1.3: USB disconnect, device number 6
[27819.900351] usb 4-1.4: USB disconnect, device number 5
[27820.063456] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[27820.063502] xhci_hcd 0000:39:00.0: remove, state 1
[27820.063516] usb usb3: USB disconnect, device number 1
[27820.069515] xhci_hcd 0000:39:00.0: Host halt failed, -19
[27820.069535] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[27820.070070] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[27820.100286] pci_bus 0000:02: Allocating resources
[27820.100823] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[27820.100850] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[27820.100864] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[27820.100884] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[27820.100904] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[27820.100915] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[27820.100926] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[27820.100935] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[27820.100958] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[27820.100967] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[27820.100976] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[27820.100984] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[27820.100993] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[27820.101001] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[27820.101016] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[27820.101025] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[27820.101035] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[27820.101042] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[27820.101051] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[27820.101058] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[27824.798489] pcieport 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
[27824.802318] pci_bus 0000:03: busn_res: [bus 03] is released
[27824.802886] pci_bus 0000:04: busn_res: [bus 04-38] is released
[27824.803453] pci_bus 0000:39: busn_res: [bus 39] is released
[27824.803960] pci_bus 0000:02: busn_res: [bus 02-39] is released
[27851.076583] Bluetooth: MGMT ver 1.23
[27851.091414] NET: Registered PF_ALG protocol family
[27851.155503] Bluetooth: RFCOMM TTY layer initialized
[27851.155531] Bluetooth: RFCOMM socket layer initialized
[27851.155547] Bluetooth: RFCOMM ver 1.11
[27851.741614] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[27851.741624] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[27851.744958] wlp58s0: authenticated
[27851.746617] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[27851.766232] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=2)
[27851.769206] wlp58s0: associated
[27851.864606] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[38490.041328] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[38491.685151] PM: suspend entry (deep)
[38491.703610] Filesystems sync: 0.018 seconds
[38491.714863] Freezing user space processes
[38491.717180] Freezing user space processes completed (elapsed 0.002 seconds)
[38491.717195] OOM killer disabled.
[38491.717199] Freezing remaining freezable tasks
[38491.718972] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[38491.719111] printk: Suspending console(s) (use no_console_suspend to debug)
[38492.325511] ACPI: EC: interrupt blocked
[38492.359088] ACPI: PM: Preparing to enter system sleep state S3
[38492.369308] ACPI: EC: event blocked
[38492.369312] ACPI: EC: EC stopped
[38492.369314] ACPI: PM: Saving platform NVS memory
[38492.372774] Disabling non-boot CPUs ...
[38492.375782] smpboot: CPU 3 is now offline
[38492.380181] smpboot: CPU 2 is now offline
[38492.383216] smpboot: CPU 1 is now offline
[38492.395468] ACPI: PM: Low-level resume complete
[38492.395511] ACPI: EC: EC started
[38492.395512] ACPI: PM: Restoring platform NVS memory
[38492.397467] Enabling non-boot CPUs ...
[38492.397491] smpboot: Booting Node 0 Processor 1 APIC 0x2
[38492.398167] CPU1 is up
[38492.398182] smpboot: Booting Node 0 Processor 2 APIC 0x1
[38492.398900] CPU2 is up
[38492.398916] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38492.399568] CPU3 is up
[38492.402441] ACPI: PM: Waking up from system sleep state S3
[38492.434624] ACPI: EC: interrupt unblocked
[38492.452816] ACPI: EC: event unblocked
[38492.455200] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[38492.455209] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[38492.468755] nvme nvme0: 4/0/0 default/read/poll queues
[38492.481644] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[38492.481647] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[38492.481650] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[38492.690995] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[38492.703247] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[38492.963293] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[38493.219298] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[38493.362869] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[38493.362875] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[38493.364827] OOM killer enabled.
[38493.364831] Restarting tasks ... done.
[38493.368779] random: crng reseeded on system resumption
[38493.483145] PM: suspend exit
[38493.722746] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[38493.744903] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[38493.931809] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[38499.387710] wlp58s0: authenticate with 88:71:b1:81:93:1a (local address=9c:b6:d0:d1:6a:b1)
[38499.387725] wlp58s0: send auth to 88:71:b1:81:93:1a (try 1/3)
[38499.389977] wlp58s0: authenticated
[38499.391006] wlp58s0: associate with 88:71:b1:81:93:1a (try 1/3)
[38499.420944] wlp58s0: RX AssocResp from 88:71:b1:81:93:1a (capab=0x1431 status=0 aid=1)
[38499.424345] wlp58s0: associated
[38499.487483] wlp58s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 88:71:b1:81:93:1a
[38573.414759] wlp58s0: disconnect from AP 88:71:b1:81:93:1a for new auth to 88:71:b1:81:93:1b
[38573.500282] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[38573.500296] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[38573.503446] wlp58s0: authenticated
[38573.506458] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[38573.539343] wlp58s0: RX ReassocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[38573.542218] wlp58s0: associated
[38573.564688] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[38776.569561] systemd-sysv-generator[40936]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[38776.569571] systemd-sysv-generator[40936]: Please update package to include a native systemd unit file.
[38776.569575] systemd-sysv-generator[40936]: ! This compatibility logic is deprecated, expect removal soon. !
[38821.020562] systemd-sysv-generator[41755]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[38821.020573] systemd-sysv-generator[41755]: Please update package to include a native systemd unit file.
[38821.020577] systemd-sysv-generator[41755]: ! This compatibility logic is deprecated, expect removal soon. !
[40817.865395] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[40819.593036] PM: suspend entry (deep)
[40819.607095] Filesystems sync: 0.014 seconds
[40819.610776] Freezing user space processes
[40819.612368] Freezing user space processes completed (elapsed 0.001 seconds)
[40819.612371] OOM killer disabled.
[40819.612372] Freezing remaining freezable tasks
[40819.613715] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[40819.613765] printk: Suspending console(s) (use no_console_suspend to debug)
[40820.211030] ACPI: EC: interrupt blocked
[40820.242596] ACPI: PM: Preparing to enter system sleep state S3
[40820.253819] ACPI: EC: event blocked
[40820.253824] ACPI: EC: EC stopped
[40820.253826] ACPI: PM: Saving platform NVS memory
[40820.257260] Disabling non-boot CPUs ...
[40820.259183] smpboot: CPU 3 is now offline
[40820.263329] smpboot: CPU 2 is now offline
[40820.266326] smpboot: CPU 1 is now offline
[40820.274989] ACPI: PM: Low-level resume complete
[40820.275033] ACPI: EC: EC started
[40820.275034] ACPI: PM: Restoring platform NVS memory
[40820.276985] Enabling non-boot CPUs ...
[40820.277012] smpboot: Booting Node 0 Processor 1 APIC 0x2
[40820.277686] CPU1 is up
[40820.277701] smpboot: Booting Node 0 Processor 2 APIC 0x1
[40820.278405] CPU2 is up
[40820.278420] smpboot: Booting Node 0 Processor 3 APIC 0x3
[40820.279081] CPU3 is up
[40820.281957] ACPI: PM: Waking up from system sleep state S3
[40820.318322] ACPI: EC: interrupt unblocked
[40820.336490] ACPI: EC: event unblocked
[40820.339508] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[40820.339517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[40820.352420] nvme nvme0: 4/0/0 default/read/poll queues
[40820.365283] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[40820.365288] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[40820.365290] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[40820.586862] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[40820.598648] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[40820.780184] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[40820.842846] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[40821.102861] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[40821.246875] OOM killer enabled.
[40821.246879] Restarting tasks ... done.
[40821.252552] random: crng reseeded on system resumption
[40821.410064] PM: suspend exit
[40821.457215] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[40821.457219] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[40821.804534] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[40821.821208] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[40821.844370] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[40826.887818] wlp58s0: authenticate with 58:8b:f3:1f:3f:50 (local address=9c:b6:d0:d1:6a:b1)
[40826.887825] wlp58s0: send auth to 58:8b:f3:1f:3f:50 (try 1/3)
[40826.888703] wlp58s0: authenticated
[40826.890690] wlp58s0: associate with 58:8b:f3:1f:3f:50 (try 1/3)
[40826.892868] wlp58s0: RX AssocResp from 58:8b:f3:1f:3f:50 (capab=0x11 status=0 aid=2)
[40826.895714] wlp58s0: associated
[40826.947276] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 58:8b:f3:1f:3f:50
[40885.957795] sctp: Hash tables configured (bind 256/256)
[41605.534439] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[41605.551346] usb 2-1: New USB device found, idVendor=0781, idProduct=5580, bcdDevice= 0.10
[41605.551374] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[41605.551384] usb 2-1: Product: Extreme
[41605.551392] usb 2-1: Manufacturer: SanDisk
[41605.551399] usb 2-1: SerialNumber: AA011230150857540508
[41605.554599] usb-storage 2-1:1.0: USB Mass Storage device detected
[41605.555469] scsi host0: usb-storage 2-1:1.0
[41606.572243] scsi 0:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
[41606.583357] sd 0:0:0:0: [sda] 61282631 512-byte logical blocks: (31.4 GB/29.2 GiB)
[41606.583692] sd 0:0:0:0: [sda] Write Protect is off
[41606.583696] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[41606.583966] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[41606.614969] sda: sda1 sda2
[41606.615113] sd 0:0:0:0: [sda] Attached SCSI removable disk
[41622.507243] usb 2-1: USB disconnect, device number 2
[44177.000699] ath10k_pci 0000:3a:00.0: firmware crashed! (guid 1b4a40c5-4495-4c5b-9df9-b7395848239c)
[44177.000720] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[44177.000731] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[44177.002450] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[44177.004168] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[44177.004176] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[44177.014494] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
[44177.014498] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
[44177.014500] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
[44177.014508] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
[44177.014517] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 19 19 64 65
[44177.014525] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 39 37 36 37
[44177.014532] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 20 20 22 20
[44177.014540] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 6457 6457 222 158
[44177.014548] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
[44177.014556] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 29 29 0 0
[44177.014563] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
[44177.109219] ieee80211 phy0: Hardware restart was requested
[44177.429445] ath10k_pci 0000:3a:00.0: device successfully recovered
[44407.827878] wlp58s0: deauthenticating from 58:8b:f3:1f:3f:50 by local choice (Reason: 3=DEAUTH_LEAVING)
[44418.477798] wlp58s0: authenticate with 58:8b:f3:1f:3f:50 (local address=9c:b6:d0:d1:6a:b1)
[44418.477805] wlp58s0: send auth to 58:8b:f3:1f:3f:50 (try 1/3)
[44418.478800] wlp58s0: authenticated
[44418.480431] wlp58s0: associate with 58:8b:f3:1f:3f:50 (try 1/3)
[44418.482659] wlp58s0: RX AssocResp from 58:8b:f3:1f:3f:50 (capab=0x11 status=0 aid=2)
[44418.485675] wlp58s0: associated
[44418.507960] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 58:8b:f3:1f:3f:50
[46222.128835] ath10k_pci 0000:3a:00.0: firmware crashed! (guid bf3b94e3-2299-40d4-8e23-b36b04eada55)
[46222.128859] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[46222.128871] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[46222.130766] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[46222.131813] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[46222.131817] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[46222.142135] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
[46222.142142] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
[46222.142145] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
[46222.142153] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
[46222.142162] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 27 27 392 393
[46222.142170] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 59 57 120 121
[46222.142177] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 10 10 12 10
[46222.142185] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 909 909 8 200
[46222.142192] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
[46222.142200] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 18 18 24 24
[46222.142208] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
[46222.238935] ieee80211 phy0: Hardware restart was requested
[46222.543545] ath10k_pci 0000:3a:00.0: device successfully recovered
[46396.872581] wlp58s0: deauthenticated from 58:8b:f3:1f:3f:50 (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT)
[46400.190559] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 58:8b:f3:1f:3f:50: -110
[46400.190575] wlp58s0: failed to remove key (0, 58:8b:f3:1f:3f:50) from hardware (-110)
[46400.439212] wlp58s0: authenticate with 58:8b:f3:1f:3f:4f (local address=9c:b6:d0:d1:6a:b1)
[46400.439228] wlp58s0: send auth to 58:8b:f3:1f:3f:4f (try 1/3)
[46400.443325] wlp58s0: authenticated
[46400.446531] wlp58s0: associate with 58:8b:f3:1f:3f:4f (try 1/3)
[46400.450387] wlp58s0: RX AssocResp from 58:8b:f3:1f:3f:4f (capab=0x411 status=0 aid=2)
[46400.453836] wlp58s0: associated
[46708.167711] wlp58s0: disconnect from AP 58:8b:f3:1f:3f:4f for new auth to 58:8b:f3:1f:3f:50
[46708.245913] wlp58s0: authenticate with 58:8b:f3:1f:3f:50 (local address=9c:b6:d0:d1:6a:b1)
[46708.245928] wlp58s0: send auth to 58:8b:f3:1f:3f:50 (try 1/3)
[46708.248443] wlp58s0: authenticated
[46708.251151] wlp58s0: associate with 58:8b:f3:1f:3f:50 (try 1/3)
[46708.253034] wlp58s0: RX ReassocResp from 58:8b:f3:1f:3f:50 (capab=0x11 status=0 aid=2)
[46708.255964] wlp58s0: associated
[46708.269466] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 58:8b:f3:1f:3f:50
[55688.363655] wlp58s0: deauthenticating from 58:8b:f3:1f:3f:50 by local choice (Reason: 3=DEAUTH_LEAVING)
[55691.642913] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 58:8b:f3:1f:3f:50: -110
[55691.642938] wlp58s0: failed to remove key (0, 58:8b:f3:1f:3f:50) from hardware (-110)
[55692.223748] PM: suspend entry (deep)
[55692.232826] Filesystems sync: 0.009 seconds
[55692.237417] Freezing user space processes
[55692.238960] Freezing user space processes completed (elapsed 0.001 seconds)
[55692.238963] OOM killer disabled.
[55692.238964] Freezing remaining freezable tasks
[55692.240392] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[55692.240444] printk: Suspending console(s) (use no_console_suspend to debug)
[55692.849324] ACPI: EC: interrupt blocked
[55692.878991] ACPI: PM: Preparing to enter system sleep state S3
[55692.890163] ACPI: EC: event blocked
[55692.890167] ACPI: EC: EC stopped
[55692.890170] ACPI: PM: Saving platform NVS memory
[55692.893726] Disabling non-boot CPUs ...
[55692.897089] smpboot: CPU 3 is now offline
[55692.901396] smpboot: CPU 2 is now offline
[55692.905081] smpboot: CPU 1 is now offline
[55692.910389] ACPI: PM: Low-level resume complete
[55692.910434] ACPI: EC: EC started
[55692.910435] ACPI: PM: Restoring platform NVS memory
[55692.912395] Enabling non-boot CPUs ...
[55692.912419] smpboot: Booting Node 0 Processor 1 APIC 0x2
[55692.913111] CPU1 is up
[55692.913126] smpboot: Booting Node 0 Processor 2 APIC 0x1
[55692.913834] CPU2 is up
[55692.913850] smpboot: Booting Node 0 Processor 3 APIC 0x3
[55692.914501] CPU3 is up
[55692.917376] ACPI: PM: Waking up from system sleep state S3
[55692.947310] ACPI: EC: interrupt unblocked
[55692.962925] ACPI: EC: event unblocked
[55692.965167] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[55692.965268] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[55692.975063] nvme nvme0: 4/0/0 default/read/poll queues
[55692.991677] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[55692.991680] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[55692.991681] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[55693.193015] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[55693.217290] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[55693.365722] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[55693.473274] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[55693.729205] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[55693.932834] OOM killer enabled.
[55693.932837] Restarting tasks ... done.
[55693.937529] random: crng reseeded on system resumption
[55694.042372] PM: suspend exit
[55694.136261] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[55694.136276] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[55694.445426] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[55694.491140] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[55694.514751] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[55699.843423] wlp58s0: authenticate with 58:8b:f3:1f:3f:50 (local address=9c:b6:d0:d1:6a:b1)
[55699.843435] wlp58s0: send auth to 58:8b:f3:1f:3f:50 (try 1/3)
[55699.844310] wlp58s0: authenticated
[55699.844968] wlp58s0: associate with 58:8b:f3:1f:3f:50 (try 1/3)
[55699.847998] wlp58s0: RX AssocResp from 58:8b:f3:1f:3f:50 (capab=0x11 status=0 aid=1)
[55699.850649] wlp58s0: associated
[55699.905253] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 58:8b:f3:1f:3f:50
[57531.697326] wlp58s0: deauthenticating from 58:8b:f3:1f:3f:50 by local choice (Reason: 3=DEAUTH_LEAVING)
[57533.289870] PM: suspend entry (deep)
[57533.308060] Filesystems sync: 0.018 seconds
[57533.311678] Freezing user space processes
[57533.313463] Freezing user space processes completed (elapsed 0.001 seconds)
[57533.313467] OOM killer disabled.
[57533.313468] Freezing remaining freezable tasks
[57533.315260] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[57533.315376] printk: Suspending console(s) (use no_console_suspend to debug)
[57533.911463] ACPI: EC: interrupt blocked
[57533.943133] ACPI: PM: Preparing to enter system sleep state S3
[57533.953352] ACPI: EC: event blocked
[57533.953357] ACPI: EC: EC stopped
[57533.953359] ACPI: PM: Saving platform NVS memory
[57533.956751] Disabling non-boot CPUs ...
[57533.959817] smpboot: CPU 3 is now offline
[57533.964572] smpboot: CPU 2 is now offline
[57533.967107] smpboot: CPU 1 is now offline
[57533.974609] ACPI: PM: Low-level resume complete
[57533.974653] ACPI: EC: EC started
[57533.974654] ACPI: PM: Restoring platform NVS memory
[57533.976607] Enabling non-boot CPUs ...
[57533.976632] smpboot: Booting Node 0 Processor 1 APIC 0x2
[57533.977308] CPU1 is up
[57533.977322] smpboot: Booting Node 0 Processor 2 APIC 0x1
[57533.978043] CPU2 is up
[57533.978060] smpboot: Booting Node 0 Processor 3 APIC 0x3
[57533.978710] CPU3 is up
[57533.981608] ACPI: PM: Waking up from system sleep state S3
[57534.013663] ACPI: EC: interrupt unblocked
[57534.028946] ACPI: EC: event unblocked
[57534.032341] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[57534.032360] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[57534.045402] nvme nvme0: 4/0/0 default/read/poll queues
[57534.057786] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[57534.057794] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[57534.057797] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[57534.275098] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[57534.279355] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[57534.539331] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[57534.795367] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[57534.936734] OOM killer enabled.
[57534.936739] Restarting tasks ... done.
[57534.943129] random: crng reseeded on system resumption
[57535.045393] PM: suspend exit
[57535.141620] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[57535.141637] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[57535.499128] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[57535.508562] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[57535.525110] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[57540.988574] wlp58s0: authenticate with 58:8b:f3:1f:3f:50 (local address=9c:b6:d0:d1:6a:b1)
[57540.988589] wlp58s0: send auth to 58:8b:f3:1f:3f:50 (try 1/3)
[57540.989523] wlp58s0: authenticated
[57540.991090] wlp58s0: associate with 58:8b:f3:1f:3f:50 (try 1/3)
[57540.992605] wlp58s0: RX AssocResp from 58:8b:f3:1f:3f:50 (capab=0x11 status=0 aid=2)
[57540.996113] wlp58s0: associated
[57541.053714] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 58:8b:f3:1f:3f:50
[57549.041727] wlp58s0: deauthenticated from 58:8b:f3:1f:3f:50 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[57549.339616] wlp58s0: authenticate with 58:8b:f3:1f:3f:4f (local address=9c:b6:d0:d1:6a:b1)
[57549.339634] wlp58s0: send auth to 58:8b:f3:1f:3f:4f (try 1/3)
[57549.345103] wlp58s0: authenticated
[57549.351473] wlp58s0: associate with 58:8b:f3:1f:3f:4f (try 1/3)
[57549.355430] wlp58s0: RX AssocResp from 58:8b:f3:1f:3f:4f (capab=0x411 status=0 aid=1)
[57549.359350] wlp58s0: associated
[57856.549404] wlp58s0: disconnect from AP 58:8b:f3:1f:3f:4f for new auth to 58:8b:f3:1f:3f:50
[57856.622302] wlp58s0: authenticate with 58:8b:f3:1f:3f:50 (local address=9c:b6:d0:d1:6a:b1)
[57856.622317] wlp58s0: send auth to 58:8b:f3:1f:3f:50 (try 1/3)
[57856.623414] wlp58s0: authenticated
[57856.632740] wlp58s0: associate with 58:8b:f3:1f:3f:50 (try 1/3)
[57856.634267] wlp58s0: RX ReassocResp from 58:8b:f3:1f:3f:50 (capab=0x11 status=0 aid=2)
[57856.638512] wlp58s0: associated
[57856.650511] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 58:8b:f3:1f:3f:50
[58505.580891] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[58505.718682] usb 1-2: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= c.00
[58505.718699] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58505.718706] usb 1-2: Product: SAMSUNG_Android
[58505.718711] usb 1-2: Manufacturer: SAMSUNG
[58505.718715] usb 1-2: SerialNumber: R3CM50B9A4X
[58514.057916] usb 1-2: USB disconnect, device number 6
[58522.637287] wlp58s0: deauthenticating from 58:8b:f3:1f:3f:50 by local choice (Reason: 3=DEAUTH_LEAVING)
[58525.811987] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 58:8b:f3:1f:3f:50: -110
[58525.812014] wlp58s0: failed to remove key (0, 58:8b:f3:1f:3f:50) from hardware (-110)
[58526.350455] PM: suspend entry (deep)
[58526.367234] Filesystems sync: 0.016 seconds
[58526.371831] Freezing user space processes
[58526.373529] Freezing user space processes completed (elapsed 0.001 seconds)
[58526.373533] OOM killer disabled.
[58526.373534] Freezing remaining freezable tasks
[58526.374945] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[58526.374996] printk: Suspending console(s) (use no_console_suspend to debug)
[58527.012753] ACPI: EC: interrupt blocked
[58527.043962] ACPI: PM: Preparing to enter system sleep state S3
[58527.054068] ACPI: EC: event blocked
[58527.054072] ACPI: EC: EC stopped
[58527.054074] ACPI: PM: Saving platform NVS memory
[58527.057562] Disabling non-boot CPUs ...
[58527.059471] smpboot: CPU 3 is now offline
[58527.063110] smpboot: CPU 2 is now offline
[58527.069066] smpboot: CPU 1 is now offline
[58527.074244] ACPI: PM: Low-level resume complete
[58527.074289] ACPI: EC: EC started
[58527.074290] ACPI: PM: Restoring platform NVS memory
[58527.076259] Enabling non-boot CPUs ...
[58527.076284] smpboot: Booting Node 0 Processor 1 APIC 0x2
[58527.076961] CPU1 is up
[58527.076977] smpboot: Booting Node 0 Processor 2 APIC 0x1
[58527.077694] CPU2 is up
[58527.077710] smpboot: Booting Node 0 Processor 3 APIC 0x3
[58527.078362] CPU3 is up
[58527.081247] ACPI: PM: Waking up from system sleep state S3
[58532.172837] ACPI: EC: interrupt unblocked
[58532.206981] ACPI: EC: event unblocked
[58532.211089] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[58532.211114] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[58532.223296] nvme nvme0: 4/0/0 default/read/poll queues
[58532.236708] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[58532.236721] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[58532.236728] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[58532.478159] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[58532.664697] typec port0-partner: PM: parent port0 should not be sleeping
[58532.734245] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[58532.994158] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[58533.138190] OOM killer enabled.
[58533.138194] Restarting tasks ...
[58533.138448] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Upstream Port
[58533.138504] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[58533.138523] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[58533.138543] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[58533.138563] pci 0000:01:00.0: enabling Extended Tags
[58533.138706] pci 0000:01:00.0: supports D1 D2
[58533.138711] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[58533.140154] done.
[58533.140166] random: crng reseeded on system resumption
[58533.140658] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[58533.141996] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[58533.167494] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[58533.167571] pci 0000:02:00.0: PCI bridge to [bus 03]
[58533.167598] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[58533.167649] pci 0000:02:00.0: enabling Extended Tags
[58533.167850] pci 0000:02:00.0: supports D1 D2
[58533.167857] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[58533.169447] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[58533.169565] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[58533.169608] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[58533.169644] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[58533.169705] pci 0000:02:01.0: enabling Extended Tags
[58533.170037] pci 0000:02:01.0: supports D1 D2
[58533.170055] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[58533.195625] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[58533.195748] pci 0000:02:02.0: PCI bridge to [bus 39]
[58533.195795] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[58533.195875] pci 0000:02:02.0: enabling Extended Tags
[58533.205533] pci 0000:02:02.0: supports D1 D2
[58533.205557] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[58533.219935] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[58533.221365] pci 0000:02:00.0: PCI bridge to [bus 03]
[58533.222611] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[58533.229466] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[58533.229547] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[58533.229745] pci 0000:39:00.0: enabling Extended Tags
[58533.230181] pci 0000:39:00.0: supports D1 D2
[58533.230192] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[58533.230425] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[58533.235247] pci 0000:02:02.0: PCI bridge to [bus 39]
[58533.235339] pci_bus 0000:02: Allocating resources
[58533.235374] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[58533.235388] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[58533.235398] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[58533.235410] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[58533.235424] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58533.235431] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58533.235440] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58533.235446] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58533.235461] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58533.235468] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58533.235474] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58533.235480] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58533.235486] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58533.235491] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58533.235500] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58533.235506] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58533.235513] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58533.235518] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58533.235524] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58533.235530] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58533.235537] pci 0000:02:00.0: PCI bridge to [bus 03]
[58533.235550] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[58533.235574] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[58533.235589] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[58533.235599] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[58533.235620] pci 0000:02:02.0: PCI bridge to [bus 39]
[58533.235634] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[58533.235652] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[58533.235667] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[58533.235678] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[58533.255472] xhci_hcd 0000:39:00.0: xHCI Host Controller
[58533.255507] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[58533.256795] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[58533.257654] xhci_hcd 0000:39:00.0: xHCI Host Controller
[58533.257673] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[58533.257689] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[58533.257826] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
[58533.257840] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[58533.257849] usb usb3: Product: xHCI Host Controller
[58533.257856] usb usb3: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[58533.257863] usb usb3: SerialNumber: 0000:39:00.0
[58533.260044] hub 3-0:1.0: USB hub found
[58533.260204] hub 3-0:1.0: 2 ports detected
[58533.273745] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
[58533.273762] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[58533.273770] usb usb4: Product: xHCI Host Controller
[58533.273776] usb usb4: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[58533.273784] usb usb4: SerialNumber: 0000:39:00.0
[58533.276414] hub 4-0:1.0: USB hub found
[58533.276474] hub 4-0:1.0: 2 ports detected
[58533.290199] pci_bus 0000:02: Allocating resources
[58533.290243] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[58533.290258] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[58533.290268] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[58533.290282] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[58533.290295] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58533.290302] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58533.290309] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58533.290315] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58533.290330] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58533.290336] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58533.290343] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58533.290349] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58533.290354] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58533.290360] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58533.290369] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58533.290375] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58533.290381] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58533.290387] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58533.290393] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58533.290398] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58533.326382] PM: suspend exit
[58533.356240] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[58533.356258] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[58533.525648] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[58533.664170] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[58533.664177] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58533.664180] usb 3-1: Product: USB2.0 Hub
[58533.664182] usb 3-1: Manufacturer: VIA Labs, Inc.
[58533.664184] usb 3-1: SerialNumber: 000000000
[58533.665548] hub 3-1:1.0: USB hub found
[58533.668331] hub 3-1:1.0: 5 ports detected
[58533.714031] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[58533.739816] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[58533.795128] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[58533.839304] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[58533.839318] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58533.839321] usb 4-1: Product: USB3.0 Hub
[58533.839324] usb 4-1: Manufacturer: VIA Labs, Inc.
[58533.839326] usb 4-1: SerialNumber: 000000000
[58533.843603] hub 4-1:1.0: USB hub found
[58533.843862] hub 4-1:1.0: 4 ports detected
[58534.393962] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[58534.537975] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[58534.537982] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58534.537984] usb 3-1.1: Product: USB2.0 Hub
[58534.537986] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[58534.537988] usb 3-1.1: SerialNumber: 000000000
[58534.538969] hub 3-1.1:1.0: USB hub found
[58534.539121] hub 3-1.1:1.0: 4 ports detected
[58534.633731] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[58534.692227] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[58534.692242] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58534.692245] usb 4-1.1: Product: USB3.0 Hub
[58534.692247] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[58534.692249] usb 4-1.1: SerialNumber: 000000000
[58534.696380] hub 4-1.1:1.0: USB hub found
[58534.696629] hub 4-1.1:1.0: 4 ports detected
[58534.770006] usb 3-1.5: new high-speed USB device number 4 using xhci_hcd
[58534.863290] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[58534.863315] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58534.863322] usb 3-1.5: Product: USB Billboard Device
[58534.863329] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[58534.863333] usb 3-1.5: SerialNumber: 0000000000000001
[58539.252023] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[58539.252055] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[58539.256000] wlp58s0: authenticated
[58539.258212] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[58539.282970] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[58539.286442] wlp58s0: associated
[58539.378007] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[58540.154043] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[58545.529916] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[58545.734679] usb 4-1.4: device not accepting address 4, error -62
[58546.465875] usb 3-1.1.3: new high-speed USB device number 5 using xhci_hcd
[58547.905989] usb 4-1.1.3: new SuperSpeed USB device number 6 using xhci_hcd
[58547.922864] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[58547.922875] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[58547.922889] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[58547.922893] usb 4-1.1.3: Manufacturer: Realtek
[58547.922897] usb 4-1.1.3: SerialNumber: 000001
[58553.209984] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[58558.586008] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[58558.789847] usb 4-1.4: device not accepting address 7, error -62
[58559.522377] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 6 using xhci_hcd
[58559.592496] r8152 4-1.1.3:1.0 eth0: v1.12.13
[58559.739507] r8152 4-1.1.3:1.0 enx00e04ceabc41: renamed from eth0
[58563.659834] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[58581.526345] usb 4-1.2: new SuperSpeed USB device number 9 using xhci_hcd
[58581.557461] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41
[58581.557478] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[58581.557486] usb 4-1.2: Product: 4-Port USB 3.0 Hub
[58581.557491] usb 4-1.2: Manufacturer: Generic
[58581.606921] hub 4-1.2:1.0: USB hub found
[58581.608317] hub 4-1.2:1.0: 2 ports detected
[58581.669645] usb 3-1.2: new high-speed USB device number 7 using xhci_hcd
[58581.824876] usb 3-1.2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41
[58581.824895] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[58581.824903] usb 3-1.2: Product: 4-Port USB 2.0 Hub
[58581.824909] usb 3-1.2: Manufacturer: Generic
[58581.827738] hub 3-1.2:1.0: USB hub found
[58581.829252] hub 3-1.2:1.0: 4 ports detected
[58582.125649] usb 3-1.2.3: new low-speed USB device number 8 using xhci_hcd
[58582.236990] usb 3-1.2.3: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[58582.237013] usb 3-1.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[58582.237029] usb 3-1.2.3: Product: Dell KB216 Wired Keyboard
[58582.248879] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.0/0003:413C:2113.0007/input/input53
[58582.366130] hid-generic 0003:413C:2113.0007: input,hidraw2: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.2.3/input0
[58582.372299] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1/0003:413C:2113.0008/input/input54
[58582.426107] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1/0003:413C:2113.0008/input/input55
[58582.426439] hid-generic 0003:413C:2113.0008: input,hidraw3: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.2.3/input1
[58582.513666] usb 3-1.2.4: new low-speed USB device number 9 using xhci_hcd
[58582.623365] usb 3-1.2.4: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[58582.623378] usb 3-1.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[58582.623381] usb 3-1.2.4: Product: USB Optical Mouse
[58582.632524] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.4/3-1.2.4:1.0/0003:1BCF:0005.0009/input/input56
[58582.632681] hid-generic 0003:1BCF:0005.0009: input,hidraw4: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:39:00.0-1.2.4/input0
[58602.084728] usb 3-1: USB disconnect, device number 2
[58602.084744] usb 3-1.1: USB disconnect, device number 3
[58602.089976] usb 3-1.2: USB disconnect, device number 7
[58602.089990] usb 3-1.2.3: USB disconnect, device number 8
[58602.166547] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[58602.166604] xhci_hcd 0000:39:00.0: HC died; cleaning up
[58602.166664] r8152 4-1.1.3:1.0 enx00e04ceabc41: Stop submitting intr, status -108
[58602.236493] xhci_hcd 0000:39:00.0: remove, state 1
[58602.236501] usb usb4: USB disconnect, device number 1
[58602.277460] usb 4-1: USB disconnect, device number 2
[58602.277467] usb 4-1.1: USB disconnect, device number 3
[58602.277471] r8152-cfgselector 4-1.1.3: USB disconnect, device number 6
[58602.331236] usb 4-1.2: USB disconnect, device number 9
[58602.335410] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[58602.335429] xhci_hcd 0000:39:00.0: remove, state 1
[58602.335436] usb usb3: USB disconnect, device number 1
[58602.411354] usb 3-1.2.4: USB disconnect, device number 9
[58602.442655] usb 3-1.5: USB disconnect, device number 4
[58602.445304] xhci_hcd 0000:39:00.0: Host halt failed, -19
[58602.445315] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[58602.445594] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[58602.466814] pci_bus 0000:02: Allocating resources
[58602.466845] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[58602.466856] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[58602.466863] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[58602.466873] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[58602.466883] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58602.466889] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58602.466895] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58602.466900] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58602.466911] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58602.466916] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58602.466922] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58602.466926] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58602.466931] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58602.466936] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58602.466944] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58602.466949] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58602.466954] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58602.466959] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58602.466963] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58602.466968] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58607.345890] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[58607.345924] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[58607.346018] pci 0000:39:00.0: enabling Extended Tags
[58607.346176] pci 0000:39:00.0: supports D1 D2
[58607.346178] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[58607.346309] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[58607.346614] pcieport 0000:02:02.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[58607.346691] pci_bus 0000:02: Allocating resources
[58607.346711] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[58607.346716] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[58607.346719] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[58607.346724] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[58607.346728] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58607.346731] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58607.346733] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58607.346735] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58607.346740] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58607.346743] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58607.346745] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58607.346747] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58607.346748] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58607.346750] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58607.346754] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58607.346756] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58607.346758] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58607.346760] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58607.346762] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58607.346763] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58607.347096] xhci_hcd 0000:39:00.0: xHCI Host Controller
[58607.347105] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[58607.348274] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[58607.348850] xhci_hcd 0000:39:00.0: xHCI Host Controller
[58607.348859] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[58607.348865] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[58607.348935] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
[58607.348941] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[58607.348945] usb usb3: Product: xHCI Host Controller
[58607.348948] usb usb3: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[58607.348951] usb usb3: SerialNumber: 0000:39:00.0
[58607.349241] hub 3-0:1.0: USB hub found
[58607.349258] hub 3-0:1.0: 2 ports detected
[58607.350422] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
[58607.350427] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[58607.350430] usb usb4: Product: xHCI Host Controller
[58607.350432] usb usb4: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[58607.350434] usb usb4: SerialNumber: 0000:39:00.0
[58607.350700] hub 4-0:1.0: USB hub found
[58607.350715] hub 4-0:1.0: 2 ports detected
[58607.597507] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[58607.735831] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[58607.735850] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58607.735858] usb 3-1: Product: USB2.0 Hub
[58607.735864] usb 3-1: Manufacturer: VIA Labs, Inc.
[58607.735869] usb 3-1: SerialNumber: 000000000
[58607.738193] hub 3-1:1.0: USB hub found
[58607.738432] hub 3-1:1.0: 5 ports detected
[58607.861584] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[58607.906625] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[58607.906665] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58607.906674] usb 4-1: Product: USB3.0 Hub
[58607.906689] usb 4-1: Manufacturer: VIA Labs, Inc.
[58607.906694] usb 4-1: SerialNumber: 000000000
[58607.913185] hub 4-1:1.0: USB hub found
[58607.913558] hub 4-1:1.0: 4 ports detected
[58608.441439] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[58608.580050] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[58608.580076] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58608.580092] usb 3-1.1: Product: USB2.0 Hub
[58608.580098] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[58608.580103] usb 3-1.1: SerialNumber: 000000000
[58608.582229] hub 3-1.1:1.0: USB hub found
[58608.582501] hub 3-1.1:1.0: 4 ports detected
[58608.676153] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[58608.735344] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[58608.735369] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58608.735385] usb 4-1.1: Product: USB3.0 Hub
[58608.735390] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[58608.735395] usb 4-1.1: SerialNumber: 000000000
[58608.785432] hub 4-1.1:1.0: USB hub found
[58608.785578] hub 4-1.1:1.0: 4 ports detected
[58608.853443] usb 3-1.2: new high-speed USB device number 4 using xhci_hcd
[58609.008852] usb 3-1.2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41
[58609.008879] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[58609.008886] usb 3-1.2: Product: 4-Port USB 2.0 Hub
[58609.008900] usb 3-1.2: Manufacturer: Generic
[58609.013464] hub 3-1.2:1.0: USB hub found
[58609.014805] hub 3-1.2:1.0: 4 ports detected
[58609.070688] usb 4-1.2: new SuperSpeed USB device number 4 using xhci_hcd
[58609.101854] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41
[58609.101892] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[58609.101900] usb 4-1.2: Product: 4-Port USB 3.0 Hub
[58609.101915] usb 4-1.2: Manufacturer: Generic
[58609.110175] hub 4-1.2:1.0: USB hub found
[58609.111619] hub 4-1.2:1.0: 2 ports detected
[58609.185536] usb 4-1.4: new SuperSpeed USB device number 5 using xhci_hcd
[58609.203900] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[58609.203924] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58609.203931] usb 4-1.4: Product: Mass Storage Device
[58609.203945] usb 4-1.4: Manufacturer: Generic
[58609.203950] usb 4-1.4: SerialNumber: 058F84688461
[58609.207650] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[58609.208264] scsi host0: usb-storage 4-1.4:1.0
[58609.273571] usb 3-1.1.3: new high-speed USB device number 5 using xhci_hcd
[58610.021437] usb 3-1.2.3: new low-speed USB device number 6 using xhci_hcd
[58610.132650] usb 3-1.2.3: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[58610.132667] usb 3-1.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[58610.132675] usb 3-1.2.3: Product: Dell KB216 Wired Keyboard
[58610.144764] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.0/0003:413C:2113.000A/input/input57
[58610.197677] usb 4-1.1.3: new SuperSpeed USB device number 6 using xhci_hcd
[58610.214633] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[58610.214656] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[58610.214672] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[58610.214678] usb 4-1.1.3: Manufacturer: Realtek
[58610.214683] usb 4-1.1.3: SerialNumber: 000001
[58610.234881] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[58610.236488] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[58610.237333] sd 0:0:0:0: [sda] Media removed, stopped polling
[58610.238101] sd 0:0:0:1: [sdb] Media removed, stopped polling
[58610.238743] sd 0:0:0:0: [sda] Attached SCSI removable disk
[58610.240773] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[58610.247625] hid-generic 0003:413C:2113.000A: input,hidraw2: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.2.3/input0
[58610.255127] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1/0003:413C:2113.000B/input/input58
[58610.285445] usb 3-1.5: new high-speed USB device number 7 using xhci_hcd
[58610.329590] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1/0003:413C:2113.000B/input/input59
[58610.330726] hid-generic 0003:413C:2113.000B: input,hidraw3: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.2.3/input1
[58610.378401] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[58610.378410] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58610.378414] usb 3-1.5: Product: USB Billboard Device
[58610.378416] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[58610.378419] usb 3-1.5: SerialNumber: 0000000000000001
[58610.449780] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 6 using xhci_hcd
[58610.512350] r8152 4-1.1.3:1.0 eth0: v1.12.13
[58610.538133] usb 3-1.2.4: new low-speed USB device number 8 using xhci_hcd
[58610.662747] usb 3-1.2.4: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[58610.662754] usb 3-1.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[58610.662756] usb 3-1.2.4: Product: USB Optical Mouse
[58610.676991] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.4/3-1.2.4:1.0/0003:1BCF:0005.000C/input/input60
[58610.677157] hid-generic 0003:1BCF:0005.000C: input,hidraw4: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:39:00.0-1.2.4/input0
[58610.731958] r8152 4-1.1.3:1.0 enx00e04ceabc41: renamed from eth0
[58612.473802] pci_bus 0000:02: Allocating resources
[58612.473821] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[58612.473825] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[58612.473828] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[58612.473831] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[58612.473834] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58612.473836] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58612.473838] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58612.473839] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58612.473843] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58612.473845] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58612.473846] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58612.473847] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58612.473849] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58612.473850] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58612.473852] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58612.473854] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58612.473855] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58612.473856] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58612.473858] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58612.473859] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58613.237933] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[58619.045812] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed!
2024-12-08 22:21 qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed! Paul Menzel
@ 2025-03-23 11:41 ` Paul Menzel
2025-03-24 3:29 ` Baochen Qiang
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2025-03-23 11:41 UTC (permalink / raw)
To: Jeff Johnson; +Cc: Kalle Valo, Baochen Qiang, ath10k, LKML, jamie
[-- Attachment #1: Type: text/plain, Size: 7562 bytes --]
Dear Linux folks,
Am 08.12.24 um 23:21 schrieb Paul Menzel:
> Today the Wi-Fi connection stopped working, and the logs contained:
>
> [44177.000699] ath10k_pci 0000:3a:00.0: firmware crashed! (guid 1b4a40c5-4495-4c5b-9df9-b7395848239c)
> [44177.000720] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
> [44177.000731] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
> [44177.002450] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
> [44177.004168] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
> [44177.004176] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt- op 3 cal otp max-sta 32 raw 0 hwcrypto 1
> [44177.014494] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
> [44177.014498] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
> [44177.014500] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
> [44177.014508] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
> [44177.014517] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 19 19 64 65
> [44177.014525] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 39 37 36 37
> [44177.014532] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 20 20 22 20
> [44177.014540] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 6457 6457 222 158
> [44177.014548] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
> [44177.014556] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 29 29 0 0
> [44177.014563] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
> [44177.109219] ieee80211 phy0: Hardware restart was requested
> [44177.429445] ath10k_pci 0000:3a:00.0: device successfully recovered
>
> Please find the output of `dmesg` with two firmware crashes attached.
> Looking through my logs since September 20th with Linux 6.11-rcX, this
> is not the first firmware crash. The `guid` value differs pairwaise
> between each of them.
Since my message in December I found two more crashes in the logs:
Jan 20 13:11:11 abreu kernel: ath10k_pci 0000:3a:00.0: firmware
crashed! (guid 0290afa9-63d2-4d66-b355-de2e12f96f4b)
Feb 02 20:34:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware
crashed! (guid 4c1fb23a-8d0e-4c03-8dfb-a5fa9ad3d2bc)
I am now in a WLAN with Cisco access points, and get a few crashes:
Mär 21 14:01:36 abreu kernel: ath10k_pci 0000:3a:00.0: firmware
crashed! (guid bc05fa56-0033-4fca-bfc0-660568f560fd)
Mär 23 11:54:24 abreu kernel: ath10k_pci 0000:3a:00.0: firmware
crashed! (guid b6eb8244-0e48-4785-8247-901e833ed59a)
[42307.272046] ath10k_pci 0000:3a:00.0: firmware crashed! (guid
bc05fa56-0033-4fca-bfc0-660568f560fd)
[42307.272078] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target
0x05030000 chip_id 0x00340aff sub 1a56:1535
[42307.272094] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0
tracing 0 dfs 0 testmode 0
[42307.272452] ath10k_pci 0000:3a:00.0: firmware ver
WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[42307.272825] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A
crc32 d2863f91
[42307.272834] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4
htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[42307.283011] ath10k_pci 0000:3a:00.0: failed to get memcpy hi
address for firmware address 4: -16
[42307.283024] ath10k_pci 0000:3a:00.0: failed to read firmware
dump area: -16
[42307.283034] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
[42307.283050] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12
3 3
[42307.283070] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 5 5
82 83
[42307.283088] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 53 47
45 46
[42307.283104] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 13 13
14 12
[42307.283120] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 67 67
98 34
[42307.283135] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0
64 0
[42307.283151] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 22 22
24 24
[42307.283167] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1
1 0
[42307.371777] ieee80211 phy0: Hardware restart was requested
[42309.383940] ath10k_pci 0000:3a:00.0: timed out waiting peer
stats info
[42309.690205] ath10k_pci 0000:3a:00.0: device successfully recovered
[43924.050746] wlp58s0: deauthenticating from 48:2f:6b:7a:61:54 by
local choice (Reason: 3=DEAUTH_LEAVING)
Baochen, do you have an idea? Also how to fix the dump errors?
Jamie (Cc:) also reported this this January 2025 *Ath10k firmware crash*
[1].
Kind regards,
Paul
> PS: Other times:
>
> -- Boot caea92a03f6d4776926f451f8281ea31 --
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
> Sep 26 12:32:58 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid c4a6c6a2-3cf4-445e-b16b-2baa35d547f3)
> Sep 26 12:46:02 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid b8c8a5f0-7ff7-45c3-8ecb-7ba8074ba6f7)
>
> -- Boot 26e7175e65254625bf58276e9532773e --
> Okt 23 12:11:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 1b3f438c-339c-4ad1-9d82-92a96a07c3c2)
>
> Earliest crash:
>
> Sep 26 10:41:36 abreu kernel: Linux version 6.11.0-07273-g1e7530883cd2 (build@bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-5) 14.2.0,
> GNU ld (GNU Binutils for Debian) 2.43.1) #12 SMP PREEMPT_DYNAMIC Sun Sep 22 09:57:36 CEST 2024
> […]
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine register dump:
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800 28 28 265 266
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 29 27 90 91
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000 15 15 17 15
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400 3887 3887 217 153
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 20 20 16 16
> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
[1]:
https://lore.kernel.org/all/a5b15899-b214-403b-a1b2-84a948e776ef@stimulussoft.com/
[-- Attachment #2: 20250323--dell-xps-13-9360--linux-rc7-00074-ga7f2e10ecd8f--messages.txt --]
[-- Type: text/plain, Size: 239542 bytes --]
[ 0.000000] Linux version 6.14.0-rc7-00074-ga7f2e10ecd8f (build@bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #110 SMP PREEMPT_DYNAMIC Thu Mar 20 00:43:24 CET 2025
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.14.0-rc7-00074-ga7f2e10ecd8f root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=16M cryptomgr.notests
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000556aafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x515a4018-0x515b4057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000515a4017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000515a4018-0x00000000515b4057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000515b4058-0x00000000556aafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] efi: EFI v2.4 by American Megatrends
[ 0.000000] efi: ACPI=0x6518d000 ACPI 2.0=0x6518d000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x6f812000 ESRT=0x6fc86698 MEMATTR=0x62675018 INITRD=0x5577da98 TPMEventLog=0x65188018
[ 0.000000] efi: Remove mem36: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[ 0.000000] efi: Not removing mem38: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem40: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
[ 0.000000] DMI: Memory slots populated: 2/2
[ 0.000000] tsc: Detected 2900.000 MHz processor
[ 0.000000] tsc: Detected 2899.886 MHz TSC
[ 0.000650] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000652] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000658] last_pfn = 0x481800 max_arch_pfn = 0x400000000
[ 0.000661] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 0.000663] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000952] last_pfn = 0x78600 max_arch_pfn = 0x400000000
[ 0.006904] esrt: Reserving ESRT space from 0x000000006fc86698 to 0x000000006fc866d0.
[ 0.006909] Using GB pages for direct mapping
[ 0.019507] printk: log buffer data + meta data: 16777216 + 58720256 = 75497472 bytes
[ 0.019508] printk: early log buf free: 125336(95%)
[ 0.019509] Secure boot disabled
[ 0.019511] RAMDISK: [mem 0x515b5000-0x52587fff]
[ 0.019521] ACPI: Early table checksum verification disabled
[ 0.019524] ACPI: RSDP 0x000000006518D000 000024 (v02 DELL )
[ 0.019527] ACPI: XSDT 0x000000006518D0C8 00010C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.019532] ACPI: FACP 0x00000000651B2A48 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.019536] ACPI: DSDT 0x000000006518D260 0257E7 (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.019538] ACPI: FACS 0x000000006F86F180 000040
[ 0.019540] ACPI: APIC 0x00000000651B2B58 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.019541] ACPI: FPDT 0x00000000651B2BE0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.019543] ACPI: FIDT 0x00000000651B2C28 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.019545] ACPI: MCFG 0x00000000651B2CD8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.019547] ACPI: HPET 0x00000000651B2D18 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.019549] ACPI: SSDT 0x00000000651B2D50 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.019551] ACPI: BOOT 0x00000000651B30B0 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.019553] ACPI: SSDT 0x00000000651B30D8 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.019555] ACPI: HPET 0x00000000651B43A8 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.019557] ACPI: SSDT 0x00000000651B43E0 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.019559] ACPI: UEFI 0x00000000651B5168 000042 (v01 00000000 00000000)
[ 0.019561] ACPI: SSDT 0x00000000651B51B0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.019563] ACPI: LPIT 0x00000000651B6090 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.019564] ACPI: WSMT 0x00000000651B6128 000028 (v01 DELL CBX3 00000000 MSFT 0000005F)
[ 0.019566] ACPI: SSDT 0x00000000651B6150 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.019568] ACPI: SSDT 0x00000000651B62B8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.019570] ACPI: SSDT 0x00000000651B6558 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.019572] ACPI: SSDT 0x00000000651B9560 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.019574] ACPI: DBGP 0x00000000651B9640 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.019576] ACPI: DBG2 0x00000000651B9678 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.019578] ACPI: SSDT 0x00000000651B96D0 0007DD (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.019580] ACPI: SSDT 0x00000000651B9EB0 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.019582] ACPI: SLIC 0x00000000651C23A8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.019583] ACPI: NHLT 0x00000000651C2520 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.019585] ACPI: BGRT 0x00000000651C2550 000038 (v00 01072009 AMI 00010013)
[ 0.019587] ACPI: TPM2 0x00000000651C2588 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.019589] ACPI: ASF! 0x00000000651C25C0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.019591] ACPI: DMAR 0x00000000651C2660 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.019593] ACPI: Reserving FACP table memory at [mem 0x651b2a48-0x651b2b53]
[ 0.019594] ACPI: Reserving DSDT table memory at [mem 0x6518d260-0x651b2a46]
[ 0.019594] ACPI: Reserving FACS table memory at [mem 0x6f86f180-0x6f86f1bf]
[ 0.019595] ACPI: Reserving APIC table memory at [mem 0x651b2b58-0x651b2bdb]
[ 0.019596] ACPI: Reserving FPDT table memory at [mem 0x651b2be0-0x651b2c23]
[ 0.019596] ACPI: Reserving FIDT table memory at [mem 0x651b2c28-0x651b2cd3]
[ 0.019597] ACPI: Reserving MCFG table memory at [mem 0x651b2cd8-0x651b2d13]
[ 0.019597] ACPI: Reserving HPET table memory at [mem 0x651b2d18-0x651b2d4f]
[ 0.019598] ACPI: Reserving SSDT table memory at [mem 0x651b2d50-0x651b30a8]
[ 0.019598] ACPI: Reserving BOOT table memory at [mem 0x651b30b0-0x651b30d7]
[ 0.019599] ACPI: Reserving SSDT table memory at [mem 0x651b30d8-0x651b43a6]
[ 0.019599] ACPI: Reserving HPET table memory at [mem 0x651b43a8-0x651b43df]
[ 0.019600] ACPI: Reserving SSDT table memory at [mem 0x651b43e0-0x651b5163]
[ 0.019601] ACPI: Reserving UEFI table memory at [mem 0x651b5168-0x651b51a9]
[ 0.019601] ACPI: Reserving SSDT table memory at [mem 0x651b51b0-0x651b608d]
[ 0.019602] ACPI: Reserving LPIT table memory at [mem 0x651b6090-0x651b6123]
[ 0.019602] ACPI: Reserving WSMT table memory at [mem 0x651b6128-0x651b614f]
[ 0.019603] ACPI: Reserving SSDT table memory at [mem 0x651b6150-0x651b62b0]
[ 0.019603] ACPI: Reserving SSDT table memory at [mem 0x651b62b8-0x651b6556]
[ 0.019604] ACPI: Reserving SSDT table memory at [mem 0x651b6558-0x651b9559]
[ 0.019604] ACPI: Reserving SSDT table memory at [mem 0x651b9560-0x651b963a]
[ 0.019605] ACPI: Reserving DBGP table memory at [mem 0x651b9640-0x651b9673]
[ 0.019606] ACPI: Reserving DBG2 table memory at [mem 0x651b9678-0x651b96cb]
[ 0.019606] ACPI: Reserving SSDT table memory at [mem 0x651b96d0-0x651b9eac]
[ 0.019607] ACPI: Reserving SSDT table memory at [mem 0x651b9eb0-0x651c23a0]
[ 0.019607] ACPI: Reserving SLIC table memory at [mem 0x651c23a8-0x651c251d]
[ 0.019608] ACPI: Reserving NHLT table memory at [mem 0x651c2520-0x651c254c]
[ 0.019608] ACPI: Reserving BGRT table memory at [mem 0x651c2550-0x651c2587]
[ 0.019609] ACPI: Reserving TPM2 table memory at [mem 0x651c2588-0x651c25bb]
[ 0.019610] ACPI: Reserving ASF! table memory at [mem 0x651c25c0-0x651c265f]
[ 0.019610] ACPI: Reserving DMAR table memory at [mem 0x651c2660-0x651c274f]
[ 0.019727] No NUMA configuration found
[ 0.019727] Faking a node at [mem 0x0000000000000000-0x00000004817fffff]
[ 0.019737] NODE_DATA(0) allocated [mem 0x47cfd3680-0x47cffdfff]
[ 0.019900] Zone ranges:
[ 0.019901] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.019902] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.019903] Normal [mem 0x0000000100000000-0x00000004817fffff]
[ 0.019904] Device empty
[ 0.019905] Movable zone start for each node
[ 0.019907] Early memory node ranges
[ 0.019907] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.019909] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.019909] node 0: [mem 0x0000000000100000-0x00000000556aafff]
[ 0.019910] node 0: [mem 0x00000000556ad000-0x0000000064df3fff]
[ 0.019911] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
[ 0.019911] node 0: [mem 0x0000000078000000-0x00000000785fffff]
[ 0.019912] node 0: [mem 0x0000000100000000-0x00000004817fffff]
[ 0.019914] Initmem setup node 0 [mem 0x0000000000001000-0x00000004817fffff]
[ 0.019918] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.019919] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.019940] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.022434] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.022848] On node 0, zone DMA32: 45579 pages in unavailable ranges
[ 0.023355] On node 0, zone Normal: 31232 pages in unavailable ranges
[ 0.023602] On node 0, zone Normal: 26624 pages in unavailable ranges
[ 0.023610] Reserving Intel graphics memory at [mem 0x7a800000-0x7c7fffff]
[ 0.023797] ACPI: PM-Timer IO Port: 0x1808
[ 0.023802] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.023803] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.023804] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.023804] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.023831] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.023833] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.023834] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.023837] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.023838] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.023845] e820: update [mem 0x6225f000-0x623ebfff] usable ==> reserved
[ 0.023852] TSC deadline timer available
[ 0.023856] CPU topo: Max. logical packages: 1
[ 0.023856] CPU topo: Max. logical dies: 1
[ 0.023857] CPU topo: Max. dies per package: 1
[ 0.023860] CPU topo: Max. threads per core: 2
[ 0.023861] CPU topo: Num. cores per package: 2
[ 0.023861] CPU topo: Num. threads per package: 4
[ 0.023861] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.023879] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.023881] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.023883] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.023884] PM: hibernation: Registered nosave memory: [mem 0x515a4000-0x515a4fff]
[ 0.023885] PM: hibernation: Registered nosave memory: [mem 0x515b4000-0x515b4fff]
[ 0.023887] PM: hibernation: Registered nosave memory: [mem 0x556ab000-0x556abfff]
[ 0.023887] PM: hibernation: Registered nosave memory: [mem 0x556ac000-0x556acfff]
[ 0.023889] PM: hibernation: Registered nosave memory: [mem 0x6225f000-0x623ebfff]
[ 0.023890] PM: hibernation: Registered nosave memory: [mem 0x64df4000-0x6517ffff]
[ 0.023891] PM: hibernation: Registered nosave memory: [mem 0x65180000-0x651c3fff]
[ 0.023891] PM: hibernation: Registered nosave memory: [mem 0x651c4000-0x6f871fff]
[ 0.023892] PM: hibernation: Registered nosave memory: [mem 0x6f872000-0x6fffefff]
[ 0.023894] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x77ffffff]
[ 0.023895] PM: hibernation: Registered nosave memory: [mem 0x78600000-0x7c7fffff]
[ 0.023895] PM: hibernation: Registered nosave memory: [mem 0x7c800000-0xfdffffff]
[ 0.023896] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.023896] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.023897] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.023897] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.023898] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.023898] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.023899] [mem 0x7c800000-0xfdffffff] available for PCI devices
[ 0.023900] Booting paravirtualized kernel on bare hardware
[ 0.023902] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.028056] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.028338] percpu: Embedded 94 pages/cpu s290816 r65536 d28672 u524288
[ 0.028344] pcpu-alloc: s290816 r65536 d28672 u524288 alloc=1*2097152
[ 0.028346] pcpu-alloc: [0] 0 1 2 3
[ 0.028364] Kernel command line: BOOT_IMAGE=/vmlinuz-6.14.0-rc7-00074-ga7f2e10ecd8f root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=16M cryptomgr.notests
[ 0.028425] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.14.0-rc7-00074-ga7f2e10ecd8f", will be passed to user space.
[ 0.028452] random: crng init done
[ 0.029931] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.030691] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.030737] Fallback order for Node 0: 0
[ 0.030739] Built 1 zonelists, mobility grouping on. Total pages: 4090767
[ 0.030740] Policy zone: Normal
[ 0.030746] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.030753] software IO TLB: area num 4.
[ 0.049360] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.049365] kmemleak: Kernel memory leak detector disabled
[ 0.049392] ftrace: allocating 43272 entries in 170 pages
[ 0.063405] ftrace: allocated 170 pages with 4 groups
[ 0.064078] Dynamic Preempt: voluntary
[ 0.064108] rcu: Preemptible hierarchical RCU implementation.
[ 0.064109] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.064110] Trampoline variant of Tasks RCU enabled.
[ 0.064110] Rude variant of Tasks RCU enabled.
[ 0.064111] Tracing variant of Tasks RCU enabled.
[ 0.064111] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.064112] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.064116] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.064118] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.064119] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.068133] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.068346] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.068525] Console: colour dummy device 80x25
[ 0.068528] printk: legacy console [tty0] enabled
[ 0.068565] ACPI: Core revision 20240827
[ 0.068708] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.068760] APIC: Switch to symmetric I/O mode setup
[ 0.068762] DMAR: Host address width 39
[ 0.068763] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.068770] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.068772] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.068775] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.068777] DMAR: RMRR base: 0x00000064ec2000 end: 0x00000064ee1fff
[ 0.068778] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff
[ 0.068780] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.068780] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.068782] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.068783] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.068784] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.070396] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.070398] x2apic enabled
[ 0.070451] APIC: Switched APIC routing to: cluster x2apic
[ 0.074488] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[ 0.074494] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
[ 0.074524] CPU0: Thermal monitoring enabled (TM1)
[ 0.074560] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.074561] Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4
[ 0.074565] process: using mwait in idle threads
[ 0.074568] Spectre V2 : User space: Vulnerable
[ 0.074569] Speculative Store Bypass: Vulnerable
[ 0.074572] SRBDS: Vulnerable
[ 0.074577] GDS: Vulnerable
[ 0.074581] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.074582] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.074583] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.074584] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.074585] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.074586] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.074587] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.074588] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.074589] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.078492] Freeing SMP alternatives memory: 36K
[ 0.078492] pid_max: default: 32768 minimum: 301
[ 0.078492] LSM: initializing lsm=capability,landlock,apparmor,bpf
[ 0.078492] landlock: Up and running.
[ 0.078492] AppArmor: AppArmor initialized
[ 0.078492] LSM support for eBPF active
[ 0.078492] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.078492] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.078492] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.078492] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.078492] ... version: 4
[ 0.078492] ... bit width: 48
[ 0.078492] ... generic registers: 4
[ 0.078492] ... value mask: 0000ffffffffffff
[ 0.078492] ... max period: 00007fffffffffff
[ 0.078492] ... fixed-purpose events: 3
[ 0.078492] ... event mask: 000000070000000f
[ 0.078492] signal: max sigframe size: 1616
[ 0.078492] Estimated ratio of average max frequency by base frequency (times 1024): 1235
[ 0.078492] rcu: Hierarchical SRCU implementation.
[ 0.078492] rcu: Max phase no-delay instances is 1000.
[ 0.078492] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.078492] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.078492] smp: Bringing up secondary CPUs ...
[ 0.078492] smpboot: x86: Booting SMP configuration:
[ 0.078492] .... node #0, CPUs: #1 #2 #3
[ 0.078492] smp: Brought up 1 node, 4 CPUs
[ 0.078492] smpboot: Total of 4 processors activated (23199.08 BogoMIPS)
[ 0.098520] node 0 deferred pages initialised in 24ms
[ 0.099169] Memory: 15864396K/16363068K available (14148K kernel code, 2558K rwdata, 10228K rodata, 2924K init, 6288K bss, 488028K reserved, 0K cma-reserved)
[ 0.099169] devtmpfs: initialized
[ 0.099169] x86/mm: Memory block size: 128MB
[ 0.099652] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes)
[ 0.099652] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes)
[ 0.103101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.103109] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.103163] pinctrl core: initialized pinctrl subsystem
[ 0.103580] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.103779] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.103895] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.104020] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.104036] audit: initializing netlink subsys (disabled)
[ 0.104055] audit: type=2000 audit(1742453510.000:1): state=initialized audit_enabled=0 res=1
[ 0.104055] thermal_sys: Registered thermal governor 'fair_share'
[ 0.104055] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.104055] thermal_sys: Registered thermal governor 'step_wise'
[ 0.104055] thermal_sys: Registered thermal governor 'user_space'
[ 0.104055] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.104055] cpuidle: using governor ladder
[ 0.104055] cpuidle: using governor menu
[ 0.104055] Simple Boot Flag at 0x47 set to 0x80
[ 0.104055] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.104055] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.104055] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.104055] PCI: Using configuration type 1 for base access
[ 0.104055] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.104055] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.104055] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.104055] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.104055] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.104055] ACPI: Added _OSI(Module Device)
[ 0.104055] ACPI: Added _OSI(Processor Device)
[ 0.104055] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.104055] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.140612] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.146758] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.151277] ACPI: Dynamic OEM Table Load:
[ 0.151277] ACPI: SSDT 0xFFFF968D813CB800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.152029] ACPI: Dynamic OEM Table Load:
[ 0.152034] ACPI: SSDT 0xFFFF968D80D7F800 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.153448] ACPI: Dynamic OEM Table Load:
[ 0.153453] ACPI: SSDT 0xFFFF968D80D7D800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.155280] ACPI: Dynamic OEM Table Load:
[ 0.155284] ACPI: SSDT 0xFFFF968D813D1000 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.157686] ACPI: EC: EC started
[ 0.157687] ACPI: EC: interrupt blocked
[ 0.162551] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.162553] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.162555] ACPI: Interpreter enabled
[ 0.162590] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.162591] ACPI: Using IOAPIC for interrupt routing
[ 0.162622] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.162624] PCI: Using E820 reservations for host bridge windows
[ 0.163127] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.166187] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[ 0.166440] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[ 0.166702] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[ 0.166955] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[ 0.167207] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[ 0.167458] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[ 0.168060] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[ 0.168314] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 0.168566] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[ 0.168817] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[ 0.169068] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[ 0.169321] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[ 0.169575] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[ 0.169833] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[ 0.170084] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[ 0.170335] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[ 0.170600] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[ 0.171643] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[ 0.171893] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[ 0.172148] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[ 0.190677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.190684] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.190840] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.191123] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.191125] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.191829] PCI host bridge to bus 0000:00
[ 0.191832] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.191834] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.191836] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.191837] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window]
[ 0.191838] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.191840] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.191854] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 conventional PCI endpoint
[ 0.191923] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[ 0.191936] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit]
[ 0.191942] pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.191944] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f]
[ 0.191954] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.192080] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint
[ 0.192095] pci 0000:00:04.0: BAR 0 [mem 0xdc420000-0xdc427fff 64bit]
[ 0.192327] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.192359] pci 0000:00:14.0: BAR 0 [mem 0xdc410000-0xdc41ffff 64bit]
[ 0.192390] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.192835] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint
[ 0.192864] pci 0000:00:14.2: BAR 0 [mem 0xdc434000-0xdc434fff 64bit]
[ 0.192978] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint
[ 0.193029] pci 0000:00:15.0: BAR 0 [mem 0xdc433000-0xdc433fff 64bit]
[ 0.193313] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint
[ 0.193364] pci 0000:00:15.1: BAR 0 [mem 0xdc432000-0xdc432fff 64bit]
[ 0.193640] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint
[ 0.193668] pci 0000:00:16.0: BAR 0 [mem 0xdc431000-0xdc431fff 64bit]
[ 0.193696] pci 0000:00:16.0: PME# supported from D3hot
[ 0.193987] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port
[ 0.194006] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.194010] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.194017] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.194063] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.194448] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port
[ 0.194464] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.194468] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.194517] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.194887] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 PCIe Root Port
[ 0.194903] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.194907] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.194954] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.195332] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port
[ 0.195347] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.195351] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.195397] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.195794] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100 conventional PCI endpoint
[ 0.196051] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint
[ 0.196085] pci 0000:00:1f.2: BAR 0 [mem 0xdc42c000-0xdc42ffff]
[ 0.196260] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint
[ 0.196304] pci 0000:00:1f.3: BAR 0 [mem 0xdc428000-0xdc42bfff 64bit]
[ 0.196310] pci 0000:00:1f.3: BAR 4 [mem 0xdc400000-0xdc40ffff 64bit]
[ 0.196346] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.196875] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.197008] pci 0000:00:1f.4: BAR 0 [mem 0xdc430000-0xdc4300ff 64bit]
[ 0.197018] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f]
[ 0.197281] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.197716] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000 PCIe Endpoint
[ 0.198157] pci 0000:3a:00.0: BAR 0 [mem 0xdc000000-0xdc1fffff 64bit]
[ 0.199036] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 0.200647] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.200743] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000 PCIe Endpoint
[ 0.200787] pci 0000:3b:00.0: BAR 1 [mem 0xdc300000-0xdc300fff]
[ 0.200866] pci 0000:3b:00.0: supports D1 D2
[ 0.200867] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.201184] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.201276] pci 0000:3c:00.0: [1c5c:1284] type 00 class 0x010802 PCIe Endpoint
[ 0.201314] pci 0000:3c:00.0: BAR 0 [mem 0xdc200000-0xdc203fff 64bit]
[ 0.201392] pci 0000:3c:00.0: PME# supported from D0 D1 D3hot
[ 0.201715] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.204580] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.204580] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.204580] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.204580] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.204580] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.204580] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.204580] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.204580] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.213935] ACPI: EC: interrupt unblocked
[ 0.213936] ACPI: EC: event unblocked
[ 0.213942] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.213943] ACPI: EC: GPE=0x14
[ 0.213944] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.213946] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.214176] iommu: Default domain type: Translated
[ 0.214176] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.214176] pps_core: LinuxPPS API ver. 1 registered
[ 0.214176] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.214176] PTP clock support registered
[ 0.214176] EDAC MC: Ver: 3.0.0
[ 0.214670] efivars: Registered efivars operations
[ 0.214682] NetLabel: Initializing
[ 0.214684] NetLabel: domain hash size = 128
[ 0.214685] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.214705] NetLabel: unlabeled traffic allowed by default
[ 0.214707] PCI: Using ACPI for IRQ routing
[ 0.239529] PCI: pci_cache_line_size set to 64 bytes
[ 0.239910] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.239911] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.239912] e820: reserve RAM buffer [mem 0x515a4018-0x53ffffff]
[ 0.239913] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff]
[ 0.239914] e820: reserve RAM buffer [mem 0x6225f000-0x63ffffff]
[ 0.239915] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff]
[ 0.239916] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff]
[ 0.239917] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff]
[ 0.239948] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.239948] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.239948] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.239948] vgaarb: loaded
[ 0.239948] clocksource: Switched to clocksource tsc-early
[ 0.239948] VFS: Disk quotas dquot_6.6.0
[ 0.239948] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.239948] AppArmor: AppArmor Filesystem Enabled
[ 0.239948] pnp: PnP ACPI init
[ 0.239948] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.239948] system 00:00: [io 0xffff] has been reserved
[ 0.239948] system 00:00: [io 0xffff] has been reserved
[ 0.239948] system 00:00: [io 0xffff] has been reserved
[ 0.239948] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.239948] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.239948] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.239948] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.239948] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.239948] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.239948] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.239948] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.239948] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.239948] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.239948] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.239948] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.239948] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.239948] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.239948] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.239948] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.239948] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.239948] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.239948] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.239948] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.239948] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.240776] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.240778] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.245316] pnp: PnP ACPI: found 9 devices
[ 0.250702] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.250748] NET: Registered PF_INET protocol family
[ 0.250857] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.261540] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.261560] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.261619] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.261809] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.262003] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.262091] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.262149] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.262216] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.262291] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.262297] NET: Registered PF_XDP protocol family
[ 0.262305] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
[ 0.262315] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned
[ 0.262318] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.262320] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.262323] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.262326] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.262330] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.262333] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.262338] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.262341] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.262347] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.262350] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.262355] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.262356] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.262357] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.262359] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window]
[ 0.262360] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.262361] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.262362] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 0.262363] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.262364] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
[ 0.262366] pci_bus 0000:3b: resource 1 [mem 0xdc300000-0xdc3fffff]
[ 0.262367] pci_bus 0000:3c: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.262937] PCI: CLS 0 bytes, default 64
[ 0.262981] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint
[ 0.263118] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[ 0.263250] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
[ 0.263254] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
[ 0.263265] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.263266] software IO TLB: mapped [mem 0x000000005e25f000-0x000000006225f000] (64MB)
[ 0.263309] Unpacking initramfs...
[ 0.263319] sgx: EPC section 0x70200000-0x75f7ffff
[ 0.263772] sgx: SGX disabled: SGX launch control CPU feature is not available, /dev/sgx_enclave disabled.
[ 0.264278] Initialise system trusted keyrings
[ 0.264290] Key type blacklist registered
[ 0.264401] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.264435] zbud: loaded
[ 0.264646] fuse: init (API version 7.42)
[ 0.264912] Key type asymmetric registered
[ 0.264917] Asymmetric key parser 'x509' registered
[ 0.294620] Freeing initrd memory: 16204K
[ 0.297327] alg: self-tests disabled
[ 0.297385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.297410] io scheduler mq-deadline registered
[ 0.298014] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.298708] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.300729] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.300731] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 0.300887] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.301470] hpet_acpi_add: no address or irqs in _CRS
[ 0.313183] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
[ 0.347276] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.351839] i8042: Warning: Keylock active
[ 0.354004] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.354008] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.354177] mousedev: PS/2 mouse device common for all mice
[ 0.354218] rtc_cmos 00:01: RTC can wake from S4
[ 0.354969] rtc_cmos 00:01: registered as rtc0
[ 0.355123] rtc_cmos 00:01: setting system clock to 2025-03-20T06:51:50 UTC (1742453510)
[ 0.355145] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 0.355270] intel_pstate: Intel P-state driver initializing
[ 0.355478] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.355533] intel_pstate: HWP enabled
[ 0.355753] efifb: probing for efifb
[ 0.355763] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 0.355765] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 0.355766] efifb: scrolling: redraw
[ 0.355766] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.355869] Console: switching to colour frame buffer device 200x56
[ 0.359127] fb0: EFI VGA frame buffer device
[ 0.359264] NET: Registered PF_INET6 protocol family
[ 0.362398] Segment Routing with IPv6
[ 0.362415] In-situ OAM (IOAM) with IPv6
[ 0.362436] mip6: Mobile IPv6
[ 0.362440] NET: Registered PF_PACKET protocol family
[ 0.362463] mpls_gso: MPLS GSO support
[ 0.362628] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.362656] microcode: Current revision: 0x000000f6
[ 0.362657] microcode: Updated early from: 0x000000f0
[ 0.362711] IPI shorthand broadcast: enabled
[ 0.363625] sched_clock: Marking stable (356684362, 6016883)->(375839208, -13137963)
[ 0.363745] registered taskstats version 1
[ 0.363809] Loading compiled-in X.509 certificates
[ 0.365223] Demotion targets for Node 0: null
[ 0.365251] Key type .fscrypt registered
[ 0.365252] Key type fscrypt-provisioning registered
[ 0.369333] cryptd: max_cpu_qlen set to 1000
[ 0.369925] AES CTR mode by8 optimization enabled
[ 0.378190] Key type encrypted registered
[ 0.378195] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.378624] RAS: Correctable Errors collector initialized.
[ 0.387235] clk: Disabling unused clocks
[ 0.388098] Freeing unused decrypted memory: 2036K
[ 0.388530] Freeing unused kernel image (initmem) memory: 2924K
[ 0.388550] Write protecting the kernel read-only data: 24576k
[ 0.388759] Freeing unused kernel image (text/rodata gap) memory: 184K
[ 0.388774] Freeing unused kernel image (rodata/data gap) memory: 12K
[ 0.399347] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.399352] Run /init as init process
[ 0.399353] with arguments:
[ 0.399354] /init
[ 0.399355] with environment:
[ 0.399356] HOME=/
[ 0.399357] TERM=linux
[ 0.399357] BOOT_IMAGE=/vmlinuz-6.14.0-rc7-00074-ga7f2e10ecd8f
[ 0.490340] nvme nvme0: pci function 0000:3c:00.0
[ 0.506387] nvme nvme0: 4/0/0 default/read/poll queues
[ 0.513587] nvme0n1: p1 p2 p3 p4
[ 0.554648] device-mapper: uevent: version 1.0.3
[ 0.554760] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[ 1.290302] tsc: Refined TSC clocksource calibration: 2904.007 MHz
[ 1.290323] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc0c50045, max_idle_ns: 440795208304 ns
[ 1.290391] clocksource: Switched to clocksource tsc
[ 57.737121] PM: Image not found (code -22)
[ 57.813193] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none.
[ 57.935680] systemd[1]: Inserted module 'autofs4'
[ 57.978518] systemd[1]: systemd 257.4-3 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 57.978535] systemd[1]: Detected architecture x86-64.
[ 57.982287] systemd[1]: Hostname set to <abreu>.
[ 58.284886] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 58.319173] systemd-sysv-generator[375]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 58.319177] systemd-sysv-generator[375]: Please update package to include a native systemd unit file.
[ 58.319179] systemd-sysv-generator[375]: ! This compatibility logic is deprecated, expect removal soon. !
[ 58.433870] systemd[1]: Queued start job for default target graphical.target.
[ 58.458959] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 58.459247] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 58.459479] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice.
[ 58.459712] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 58.459866] systemd[1]: Created slice user.slice - User and Session Slice.
[ 58.459908] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 58.459938] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 58.460086] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 58.460102] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
[ 58.460110] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8...
[ 58.460117] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5...
[ 58.460122] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653...
[ 58.460138] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 58.460161] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 58.460172] systemd[1]: Reached target paths.target - Path Units.
[ 58.460192] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 58.460201] systemd[1]: Reached target slices.target - Slice Units.
[ 58.460225] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 58.461509] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 58.462370] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 58.462442] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 58.462508] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 58.462578] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 58.462616] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 58.462631] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 58.462687] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 58.462727] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 58.464168] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 58.464818] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 58.465867] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
[ 58.470189] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 58.471144] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 58.474196] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 58.475375] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 58.481015] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 58.482152] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 58.486217] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 58.486329] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 58.487678] systemd[1]: Starting systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info...
[ 58.493063] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 58.498205] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 58.498235] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 58.499156] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 58.499206] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 58.508320] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 58.509254] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 58.511239] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 58.511351] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 58.511441] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[ 58.511528] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 58.511609] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 58.512297] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 58.512606] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 58.512779] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 58.513033] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 58.513195] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 58.513477] systemd[1]: Finished systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info.
[ 58.514657] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 58.516619] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 58.516901] pstore: Using crash dump compression: deflate
[ 58.522910] pstore: Registered efi_pstore as persistent store backend
[ 58.525307] ACPI: bus type drm_connector registered
[ 58.525402] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 58.528726] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 58.529213] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 58.530923] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 58.533038] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 58.535628] lp: driver loaded but no devices found
[ 58.536170] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 58.536790] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 58.536905] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 58.539188] ppdev: user-space parallel port driver
[ 58.540789] systemd-journald[390]: Collecting audit messages is disabled.
[ 58.550972] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 58.551325] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w. Quota mode: none.
[ 58.552007] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 58.552767] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 58.553048] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 58.553385] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 58.553433] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 58.558332] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 58.558404] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[ 58.560140] systemd[1]: Starting systemd-timesyncd.service - Network Time Synchronization...
[ 58.560945] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 58.560970] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 58.570532] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 58.575491] systemd[1]: Started systemd-journald.service - Journal Service.
[ 58.612149] systemd-journald[390]: Received client request to flush runtime journal.
[ 58.791118] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input16
[ 58.813557] input: Intel HID events as /devices/platform/INT33D5:00/input/input17
[ 58.816838] ACPI: bus type USB registered
[ 58.816875] usbcore: registered new interface driver usbfs
[ 58.816890] usbcore: registered new interface driver hub
[ 58.816904] usbcore: registered new device driver usb
[ 58.817109] intel-hid INT33D5:00: platform supports 5 button array
[ 58.817151] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input18
[ 58.818820] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 58.819399] ACPI: button: Lid Switch [LID0]
[ 58.819490] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input19
[ 58.820438] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 58.820952] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 58.822642] ACPI: button: Power Button [PBTN]
[ 58.823833] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input20
[ 58.824604] ACPI: button: Sleep Button [SBTN]
[ 58.824679] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input21
[ 58.824915] ACPI: button: Power Button [PWRF]
[ 58.830831] wmi_bus wmi_bus-PNP0C14:01: [Firmware Bug]: WQBC data block query control method not found
[ 58.835345] ACPI: AC: AC Adapter [AC] (off-line)
[ 58.847422] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input22
[ 58.888215] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS
[ 58.908669] ACPI: battery: Slot [BAT0] (battery present)
[ 58.911084] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 58.911097] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 58.912185] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 58.916664] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 58.916672] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 58.916685] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 58.917905] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[ 58.917911] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 58.917914] usb usb1: Product: xHCI Host Controller
[ 58.917916] usb usb1: Manufacturer: Linux 6.14.0-rc7-00074-ga7f2e10ecd8f xhci-hcd
[ 58.917919] usb usb1: SerialNumber: 0000:00:14.0
[ 58.918669] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 58.919445] intel_pmc_core INT33A1:00: initialized
[ 58.939261] intel_rapl_common: Found RAPL domain package
[ 58.939266] intel_rapl_common: Found RAPL domain dram
[ 58.951742] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 58.977681] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 58.979697] hub 1-0:1.0: USB hub found
[ 58.979794] hub 1-0:1.0: 12 ports detected
[ 59.059635] input: PC Speaker as /devices/platform/pcspkr/input/input24
[ 59.060198] rtsx_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[ 59.064745] hid: raw HID events driver (C) Jiri Kosina
[ 59.077158] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[ 59.077163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 59.077164] usb usb2: Product: xHCI Host Controller
[ 59.077166] usb usb2: Manufacturer: Linux 6.14.0-rc7-00074-ga7f2e10ecd8f xhci-hcd
[ 59.077167] usb usb2: SerialNumber: 0000:00:14.0
[ 59.077450] hub 2-0:1.0: USB hub found
[ 59.077460] hub 2-0:1.0: 6 ports detected
[ 59.322065] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 59.617325] intel_rapl_common: Found RAPL domain package
[ 59.617329] intel_rapl_common: Found RAPL domain core
[ 59.617330] intel_rapl_common: Found RAPL domain uncore
[ 59.617493] intel_rapl_common: Found RAPL domain dram
[ 59.617495] intel_rapl_common: Found RAPL domain psys
[ 59.618865] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[ 59.618871] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 59.621445] stackdepot: allocating hash table of 1048576 entries via kvcalloc
[ 59.642804] i915 0000:00:02.0: [drm] Found kabylake/ult (device ID 5916) integrated display version 9.00 stepping B0
[ 59.644615] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 59.644623] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 59.644627] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 59.644630] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 59.644633] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 59.644636] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 59.646153] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 59.646193] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 59.651910] Console: switching to colour dummy device 80x25
[ 59.655494] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 59.660740] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 59.663307] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 59.685510] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none.
[ 59.728969] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 59.746710] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
[ 59.752657] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 59.754441] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input25
[ 59.782114] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 59.790532] fbcon: i915drmfb (fb0) is primary device
[ 59.795104] Console: switching to colour frame buffer device 200x56
[ 59.822536] iTCO_vendor_support: vendor-support=0
[ 59.833002] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 59.839080] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 59.841994] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 59.883035] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input26
[ 59.886515] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input27
[ 59.887150] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 59.914251] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 59.922485] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[ 59.922490] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 59.922492] usb 1-4: Product: Touchscreen
[ 59.922493] usb 1-4: Manufacturer: ELAN
[ 59.930210] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 59.930414] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 59.932519] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 59.961696] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input29
[ 59.977772] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 59.983921] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 60.042064] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 60.056675] audit: type=1400 audit(1742453570.191:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=560 comm="apparmor_parser"
[ 60.056689] audit: type=1400 audit(1742453570.191:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=558 comm="apparmor_parser"
[ 60.056695] audit: type=1400 audit(1742453570.195:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=561 comm="apparmor_parser"
[ 60.056700] audit: type=1400 audit(1742453570.195:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=559 comm="apparmor_parser"
[ 60.061719] audit: type=1400 audit(1742453570.199:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=565 comm="apparmor_parser"
[ 60.063863] audit: type=1400 audit(1742453570.203:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=566 comm="apparmor_parser"
[ 60.063872] audit: type=1400 audit(1742453570.203:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=564 comm="apparmor_parser"
[ 60.065314] ACPI: battery: new hook: Dell Primary Battery Extension
[ 60.066519] audit: type=1400 audit(1742453570.207:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=569 comm="apparmor_parser"
[ 60.067020] audit: type=1400 audit(1742453570.207:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=568 comm="apparmor_parser"
[ 60.069098] audit: type=1400 audit(1742453570.207:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=570 comm="apparmor_parser"
[ 60.113187] snd_hda_codec_realtek hdaudioC0D0: ALC3246: picked fixup (pin match)
[ 60.150410] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 60.150419] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 60.150423] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 60.150427] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 60.150429] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 60.150431] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 60.150434] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 60.150437] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 60.166943] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input31
[ 60.167210] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input32
[ 60.168173] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 60.211898] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 60.260384] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 60.274297] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[ 60.274305] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 60.274307] usb 1-5: Product: Integrated_Webcam_HD
[ 60.274309] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[ 60.282160] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Upstream Port
[ 60.282193] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 60.282204] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 60.282216] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 60.282230] pci 0000:01:00.0: enabling Extended Tags
[ 60.282494] pci 0000:01:00.0: supports D1 D2
[ 60.282497] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 60.282576] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 60.320866] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[ 60.320945] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 60.320970] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 60.321028] pci 0000:02:00.0: enabling Extended Tags
[ 60.321254] pci 0000:02:00.0: supports D1 D2
[ 60.321257] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 60.409843] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[ 60.409879] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 60.409890] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[ 60.409903] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 60.409920] pci 0000:02:01.0: enabling Extended Tags
[ 60.410045] pci 0000:02:01.0: supports D1 D2
[ 60.410048] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 60.411206] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[ 60.411241] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 60.411252] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[ 60.411279] pci 0000:02:02.0: enabling Extended Tags
[ 60.411393] pci 0000:02:02.0: supports D1 D2
[ 60.411395] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 60.411636] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 60.411702] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 60.411759] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 60.411873] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[ 60.411935] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[ 60.411957] pci 0000:39:00.0: enabling Extended Tags
[ 60.412088] pci 0000:39:00.0: supports D1 D2
[ 60.412091] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 60.412393] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 60.412437] pci_bus 0000:02: Allocating resources
[ 60.412453] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[ 60.412456] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 60.412459] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 60.412463] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[ 60.412466] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[ 60.412469] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[ 60.412471] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[ 60.412473] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[ 60.412478] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 60.412480] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 60.412482] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 60.412484] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[ 60.412485] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 60.412487] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[ 60.412490] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 60.412492] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 60.412494] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 60.412496] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[ 60.412497] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 60.412499] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[ 60.412502] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 60.412508] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 60.412517] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 60.412522] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[ 60.412526] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 60.412533] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 60.412538] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[ 60.412546] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 60.412551] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 60.412555] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 60.419718] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 60.419728] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 60.420868] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 60.421506] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 60.421510] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 60.421513] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 60.423644] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[ 60.423651] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 60.423653] usb usb3: Product: xHCI Host Controller
[ 60.423655] usb usb3: Manufacturer: Linux 6.14.0-rc7-00074-ga7f2e10ecd8f xhci-hcd
[ 60.423657] usb usb3: SerialNumber: 0000:39:00.0
[ 60.435084] hub 3-0:1.0: USB hub found
[ 60.435133] hub 3-0:1.0: 2 ports detected
[ 60.444259] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[ 60.444269] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 60.444274] usb usb4: Product: xHCI Host Controller
[ 60.444279] usb usb4: Manufacturer: Linux 6.14.0-rc7-00074-ga7f2e10ecd8f xhci-hcd
[ 60.444282] usb usb4: SerialNumber: 0000:39:00.0
[ 60.447376] hub 4-0:1.0: USB hub found
[ 60.447401] hub 4-0:1.0: 2 ports detected
[ 60.451003] mc: Linux media interface: v0.10
[ 60.465508] pci_bus 0000:02: Allocating resources
[ 60.465534] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[ 60.465541] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 60.465546] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 60.465552] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[ 60.465558] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[ 60.465561] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[ 60.465565] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[ 60.465568] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[ 60.465574] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 60.465578] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 60.465581] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 60.465584] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[ 60.465587] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 60.465589] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[ 60.465594] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 60.465597] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 60.465600] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 60.465603] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[ 60.465606] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 60.465609] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[ 60.489959] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 60.491286] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input34
[ 60.491801] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input35
[ 60.493905] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36
[ 60.493980] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37
[ 60.495924] videodev: Linux video capture interface: v2.00
[ 60.508685] Bluetooth: Core ver 2.22
[ 60.508755] NET: Registered PF_BLUETOOTH protocol family
[ 60.508762] Bluetooth: HCI device and connection manager initialized
[ 60.508775] Bluetooth: HCI socket layer initialized
[ 60.508789] Bluetooth: L2CAP socket layer initialized
[ 60.508805] Bluetooth: SCO socket layer initialized
[ 60.530655] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input38
[ 60.538547] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input39
[ 60.539339] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input40
[ 60.539631] hid-multitouch 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 60.543664] usbcore: registered new interface driver btusb
[ 60.543906] usbcore: registered new interface driver usbhid
[ 60.543910] usbhid: USB HID core driver
[ 60.550357] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 60.550361] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 60.565045] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 60.565052] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 60.565147] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[ 60.660613] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[ 60.686044] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 60.756415] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 60.825232] nvme nvme0: using unchecked data buffer
[ 60.831748] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 60.831755] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 60.831758] usb 3-1: Product: USB2.0 Hub
[ 60.831760] usb 3-1: Manufacturer: VIA Labs, Inc.
[ 60.831763] usb 3-1: SerialNumber: 000000000
[ 60.833096] ath: EEPROM regdomain: 0x6c
[ 60.833100] ath: EEPROM indicates we should expect a direct regpair map
[ 60.833102] ath: Country alpha2 being used: 00
[ 60.833104] ath: Regpair used: 0x6c
[ 60.839337] hub 3-1:1.0: USB hub found
[ 60.839509] hub 3-1:1.0: 5 ports detected
[ 60.863737] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 60.908888] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 60.931991] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 60.948238] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 61.007327] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 61.007336] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 61.007339] usb 4-1: Product: USB3.0 Hub
[ 61.007341] usb 4-1: Manufacturer: VIA Labs, Inc.
[ 61.007344] usb 4-1: SerialNumber: 000000000
[ 61.013473] hub 4-1:1.0: USB hub found
[ 61.013591] hub 4-1:1.0: 4 ports detected
[ 61.178934] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[ 61.313345] usbcore: registered new interface driver uvcvideo
[ 61.363216] PPP generic driver version 2.4.2
[ 61.368566] NET: Registered PF_PPPOX protocol family
[ 61.404968] Initializing XFRM netlink socket
[ 61.535067] l2tp_core: L2TP core driver, V2.0
[ 61.537646] IPsec XFRM device driver
[ 61.539560] l2tp_netlink: L2TP netlink interface
[ 61.544261] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 61.582051] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[ 61.723155] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 61.723161] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 61.723163] usb 3-1.1: Product: USB2.0 Hub
[ 61.723165] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[ 61.723167] usb 3-1.1: SerialNumber: 000000000
[ 61.724437] hub 3-1.1:1.0: USB hub found
[ 61.724625] hub 3-1.1:1.0: 4 ports detected
[ 61.818173] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 61.877740] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 61.877747] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 61.877750] usb 4-1.1: Product: USB3.0 Hub
[ 61.877752] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[ 61.877754] usb 4-1.1: SerialNumber: 000000000
[ 61.879695] hub 4-1.1:1.0: USB hub found
[ 61.879883] hub 4-1.1:1.0: 4 ports detected
[ 62.060001] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[ 62.075739] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 62.075748] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 62.075751] usb 4-1.4: Product: Mass Storage Device
[ 62.075754] usb 4-1.4: Manufacturer: Generic
[ 62.075756] usb 4-1.4: SerialNumber: 058F84688461
[ 62.096583] SCSI subsystem initialized
[ 62.100912] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[ 62.101494] scsi host0: usb-storage 4-1.4:1.0
[ 62.101751] usbcore: registered new interface driver usb-storage
[ 63.074343] usb 4-1.1.3: new SuperSpeed USB device number 5 using xhci_hcd
[ 63.090650] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 63.090657] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 63.090659] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[ 63.090661] usb 4-1.1.3: Manufacturer: Realtek
[ 63.090663] usb 4-1.1.3: SerialNumber: 000001
[ 63.109844] usbcore: registered new device driver r8152-cfgselector
[ 63.186379] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd
[ 63.251333] r8152 4-1.1.3:1.0 eth0: v1.12.13
[ 63.251611] usbcore: registered new interface driver r8152
[ 63.258526] usbcore: registered new interface driver cdc_ether
[ 63.259595] usbcore: registered new interface driver r8153_ecm
[ 63.722415] usb 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd
[ 63.762697] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 63.768745] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 63.769385] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 63.780775] r8152 4-1.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[ 64.503164] rfkill: input handler disabled
[ 65.406093] usb 3-1.5: new high-speed USB device number 5 using xhci_hcd
[ 65.495075] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 65.495083] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 65.495086] usb 3-1.5: Product: USB Billboard Device
[ 65.495088] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[ 65.495090] usb 3-1.5: SerialNumber: 0000000000000001
[ 66.598596] r8152 4-1.1.3:1.0 enx00e04ceb9e75: carrier on
[ 69.801971] rfkill: input handler enabled
[ 72.450224] rfkill: input handler disabled
[ 153.412684] systemd-sysv-generator[3417]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 153.412690] systemd-sysv-generator[3417]: Please update package to include a native systemd unit file.
[ 153.412692] systemd-sysv-generator[3417]: ! This compatibility logic is deprecated, expect removal soon. !
[ 3472.058267] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=414 end=415) time 184 us, min 1788, max 1799, scanline start 1780, end 1801
[…]
[40944.247637] PM: suspend exit
[40944.315371] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[40944.315405] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[40944.552033] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[40944.673502] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[40944.697141] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[40949.990522] wlp58s0: authenticate with 48:2f:6b:7a:61:54 (local address=9c:b6:d0:d1:6a:b1)
[40949.990533] wlp58s0: send auth to 48:2f:6b:7a:61:54 (try 1/3)
[40949.991674] wlp58s0: authenticated
[40949.995344] wlp58s0: associate with 48:2f:6b:7a:61:54 (try 1/3)
[40949.996927] wlp58s0: RX AssocResp from 48:2f:6b:7a:61:54 (capab=0x411 status=0 aid=1)
[40949.999631] wlp58s0: associated
[41177.787480] systemd-sysv-generator[133581]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[41177.787489] systemd-sysv-generator[133581]: Please update package to include a native systemd unit file.
[41177.787492] systemd-sysv-generator[133581]: ! This compatibility logic is deprecated, expect removal soon. !
[42307.272046] ath10k_pci 0000:3a:00.0: firmware crashed! (guid bc05fa56-0033-4fca-bfc0-660568f560fd)
[42307.272078] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[42307.272094] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[42307.272452] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[42307.272825] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[42307.272834] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[42307.283011] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
[42307.283024] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
[42307.283034] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
[42307.283050] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
[42307.283070] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 5 5 82 83
[42307.283088] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 53 47 45 46
[42307.283104] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 13 13 14 12
[42307.283120] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 67 67 98 34
[42307.283135] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
[42307.283151] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 22 22 24 24
[42307.283167] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1 1 0
[42307.371777] ieee80211 phy0: Hardware restart was requested
[42309.383940] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info
[42309.690205] ath10k_pci 0000:3a:00.0: device successfully recovered
[43924.050746] wlp58s0: deauthenticating from 48:2f:6b:7a:61:54 by local choice (Reason: 3=DEAUTH_LEAVING)
[43924.701604] PM: suspend entry (deep)
[43924.723952] Filesystems sync: 0.022 seconds
[…]
[43926.480171] PM: suspend exit
[43926.583995] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[43926.584004] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[43926.941450] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[43926.942080] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[43926.967184] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[43932.337256] wlp58s0: authenticate with 48:2f:6b:7a:61:54 (local address=9c:b6:d0:d1:6a:b1)
[43932.337275] wlp58s0: send auth to 48:2f:6b:7a:61:54 (try 1/3)
[43932.338339] wlp58s0: authenticated
[43932.341438] wlp58s0: associate with 48:2f:6b:7a:61:54 (try 1/3)
[43932.349342] wlp58s0: RX AssocResp from 48:2f:6b:7a:61:54 (capab=0x411 status=0 aid=2)
[43932.352610] wlp58s0: associated
[45546.223150] wlp58s0: deauthenticating from 48:2f:6b:7a:61:54 by local choice (Reason: 3=DEAUTH_LEAVING)
[45547.860974] PM: suspend entry (deep)
[45547.875388] Filesystems sync: 0.014 seconds
[45547.879990] Freezing user space processes
[45547.881818] Freezing user space processes completed (elapsed 0.001 seconds)
[45547.881822] OOM killer disabled.
[45547.881823] Freezing remaining freezable tasks
[45547.883246] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[45547.883295] printk: Suspending console(s) (use no_console_suspend to debug)
[45548.477573] ACPI: EC: interrupt blocked
[45548.506094] ACPI: PM: Preparing to enter system sleep state S3
[45548.515499] ACPI: EC: event blocked
[45548.515503] ACPI: EC: EC stopped
[45548.515505] ACPI: PM: Saving platform NVS memory
[45548.518682] Disabling non-boot CPUs ...
[45548.520706] smpboot: CPU 3 is now offline
[45548.527276] smpboot: CPU 2 is now offline
[45548.529738] smpboot: CPU 1 is now offline
[45548.536761] ACPI: PM: Low-level resume complete
[45548.536806] ACPI: EC: EC started
[45548.536807] ACPI: PM: Restoring platform NVS memory
[45548.538720] Enabling non-boot CPUs ...
[45548.538752] smpboot: Booting Node 0 Processor 1 APIC 0x2
[45548.539464] CPU1 is up
[45548.539479] smpboot: Booting Node 0 Processor 2 APIC 0x1
[45548.540210] CPU2 is up
[45548.540226] smpboot: Booting Node 0 Processor 3 APIC 0x3
[45548.540917] CPU3 is up
[45548.543752] ACPI: PM: Waking up from system sleep state S3
[45548.573021] ACPI: EC: interrupt unblocked
[45548.588951] ACPI: EC: event unblocked
[45548.600764] nvme nvme0: 4/0/0 default/read/poll queues
[45548.841211] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[45548.845300] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[45549.101211] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[45549.357262] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[45549.497348] OOM killer enabled.
[45549.497352] Restarting tasks ... done.
[45549.498857] random: crng reseeded on system resumption
[45549.603814] PM: suspend exit
[45549.700720] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[45549.700737] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[45550.056566] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[45550.075544] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[45550.079992] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[45555.195679] wlp58s0: authenticate with 48:2f:6b:7a:61:54 (local address=9c:b6:d0:d1:6a:b1)
[45555.195686] wlp58s0: send auth to 48:2f:6b:7a:61:54 (try 1/3)
[45555.196725] wlp58s0: authenticated
[45555.197182] wlp58s0: associate with 48:2f:6b:7a:61:54 (try 1/3)
[45555.198655] wlp58s0: RX AssocResp from 48:2f:6b:7a:61:54 (capab=0x411 status=0 aid=2)
[45555.201105] wlp58s0: associated
[45602.352436] wlp58s0: deauthenticating from 48:2f:6b:7a:61:54 by local choice (Reason: 3=DEAUTH_LEAVING)
[45603.950248] PM: suspend entry (deep)
[45603.969444] Filesystems sync: 0.019 seconds
[45603.972179] Freezing user space processes
[45603.974028] Freezing user space processes completed (elapsed 0.001 seconds)
[45603.974032] OOM killer disabled.
[45603.974033] Freezing remaining freezable tasks
[45603.975611] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[45603.975662] printk: Suspending console(s) (use no_console_suspend to debug)
[45604.595526] ACPI: EC: interrupt blocked
[45604.624952] ACPI: PM: Preparing to enter system sleep state S3
[45604.635123] ACPI: EC: event blocked
[45604.635128] ACPI: EC: EC stopped
[45604.635130] ACPI: PM: Saving platform NVS memory
[45604.638469] Disabling non-boot CPUs ...
[45604.640532] smpboot: CPU 3 is now offline
[45604.643606] smpboot: CPU 2 is now offline
[45604.648508] smpboot: CPU 1 is now offline
[45604.653880] ACPI: PM: Low-level resume complete
[45604.653925] ACPI: EC: EC started
[45604.653926] ACPI: PM: Restoring platform NVS memory
[45604.655844] Enabling non-boot CPUs ...
[45604.655870] smpboot: Booting Node 0 Processor 1 APIC 0x2
[45604.656587] CPU1 is up
[45604.656601] smpboot: Booting Node 0 Processor 2 APIC 0x1
[45604.657355] CPU2 is up
[45604.657371] smpboot: Booting Node 0 Processor 3 APIC 0x3
[45604.658083] CPU3 is up
[45604.660927] ACPI: PM: Waking up from system sleep state S3
[45604.697696] ACPI: EC: interrupt unblocked
[45604.728244] ACPI: EC: event unblocked
[45604.740654] nvme nvme0: 4/0/0 default/read/poll queues
[45604.963185] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[45604.983315] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[45605.239177] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[45605.495238] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[45605.634690] OOM killer enabled.
[45605.634694] Restarting tasks ... done.
[45605.636276] random: crng reseeded on system resumption
[45605.766587] PM: suspend exit
[45605.843004] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[45605.843019] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[45606.189461] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[45606.202490] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[45606.228908] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[45611.680187] wlp58s0: authenticate with 24:f2:7f:f6:18:b2 (local address=9c:b6:d0:d1:6a:b1)
[45611.680204] wlp58s0: send auth to 24:f2:7f:f6:18:b2 (try 1/3)
[45611.681221] wlp58s0: authenticated
[45611.687224] wlp58s0: associate with 24:f2:7f:f6:18:b2 (try 1/3)
[45611.689150] wlp58s0: RX AssocResp from 24:f2:7f:f6:18:b2 (capab=0x411 status=0 aid=1)
[45611.692511] wlp58s0: associated
[45632.707555] wlp58s0: deauthenticating from 24:f2:7f:f6:18:b2 by local choice (Reason: 3=DEAUTH_LEAVING)
[45639.623889] wlp58s0: authenticate with 24:f2:7f:f6:18:b2 (local address=9c:b6:d0:d1:6a:b1)
[45639.623905] wlp58s0: send auth to 24:f2:7f:f6:18:b2 (try 1/3)
[45639.625131] wlp58s0: authenticated
[45639.627043] wlp58s0: associate with 24:f2:7f:f6:18:b2 (try 1/3)
[45639.628691] wlp58s0: RX AssocResp from 24:f2:7f:f6:18:b2 (capab=0x411 status=0 aid=1)
[45639.631557] wlp58s0: associated
[45980.844149] wlp58s0: deauthenticating from 24:f2:7f:f6:18:b2 by local choice (Reason: 3=DEAUTH_LEAVING)
[45982.530058] PM: suspend entry (deep)
[45982.549652] Filesystems sync: 0.019 seconds
[45982.552413] Freezing user space processes
[45982.554282] Freezing user space processes completed (elapsed 0.001 seconds)
[45982.554285] OOM killer disabled.
[45982.554286] Freezing remaining freezable tasks
[45982.555869] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[45982.555921] printk: Suspending console(s) (use no_console_suspend to debug)
[45983.148213] ACPI: EC: interrupt blocked
[45983.176968] ACPI: PM: Preparing to enter system sleep state S3
[45983.187162] ACPI: EC: event blocked
[45983.187167] ACPI: EC: EC stopped
[45983.187169] ACPI: PM: Saving platform NVS memory
[45983.190440] Disabling non-boot CPUs ...
[45983.192461] smpboot: CPU 3 is now offline
[45983.195591] smpboot: CPU 2 is now offline
[45983.199506] smpboot: CPU 1 is now offline
[45983.207339] ACPI: PM: Low-level resume complete
[45983.207382] ACPI: EC: EC started
[45983.207383] ACPI: PM: Restoring platform NVS memory
[45983.209277] Enabling non-boot CPUs ...
[45983.209304] smpboot: Booting Node 0 Processor 1 APIC 0x2
[45983.210018] CPU1 is up
[45983.210033] smpboot: Booting Node 0 Processor 2 APIC 0x1
[45983.210782] CPU2 is up
[45983.210800] smpboot: Booting Node 0 Processor 3 APIC 0x3
[45983.211511] CPU3 is up
[45983.214375] ACPI: PM: Waking up from system sleep state S3
[45983.248731] ACPI: EC: interrupt unblocked
[45983.264320] ACPI: EC: event unblocked
[45983.278084] nvme nvme0: 4/0/0 default/read/poll queues
[45983.501358] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[45983.521373] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[45983.666109] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[45983.777373] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[45984.033379] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[45984.236091] OOM killer enabled.
[45984.236096] Restarting tasks ... done.
[45984.237849] random: crng reseeded on system resumption
[45984.358161] PM: suspend exit
[45984.443769] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[45984.443784] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[45984.805346] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[45984.822173] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[45984.835102] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[45990.110590] wlp58s0: authenticate with 24:f2:7f:f6:18:b2 (local address=9c:b6:d0:d1:6a:b1)
[45990.110599] wlp58s0: send auth to 24:f2:7f:f6:18:b2 (try 1/3)
[45990.111690] wlp58s0: authenticated
[45990.117322] wlp58s0: associate with 24:f2:7f:f6:18:b2 (try 1/3)
[45990.118973] wlp58s0: RX AssocResp from 24:f2:7f:f6:18:b2 (capab=0x411 status=0 aid=1)
[45990.121673] wlp58s0: associated
[46842.892440] wlp58s0: deauthenticating from 24:f2:7f:f6:18:b2 by local choice (Reason: 3=DEAUTH_LEAVING)
[46844.559052] PM: suspend entry (deep)
[46844.585208] Filesystems sync: 0.026 seconds
[46844.587869] Freezing user space processes
[46844.589732] Freezing user space processes completed (elapsed 0.001 seconds)
[46844.589735] OOM killer disabled.
[46844.589736] Freezing remaining freezable tasks
[46844.591357] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[46844.591409] printk: Suspending console(s) (use no_console_suspend to debug)
[46845.203848] ACPI: EC: interrupt blocked
[46845.235022] ACPI: PM: Preparing to enter system sleep state S3
[46845.246392] ACPI: EC: event blocked
[46845.246397] ACPI: EC: EC stopped
[46845.246399] ACPI: PM: Saving platform NVS memory
[46845.249649] Disabling non-boot CPUs ...
[46845.251648] smpboot: CPU 3 is now offline
[46845.255376] smpboot: CPU 2 is now offline
[46845.259549] smpboot: CPU 1 is now offline
[46845.266603] ACPI: PM: Low-level resume complete
[46845.266648] ACPI: EC: EC started
[46845.266649] ACPI: PM: Restoring platform NVS memory
[46845.268546] Enabling non-boot CPUs ...
[46845.268570] smpboot: Booting Node 0 Processor 1 APIC 0x2
[46845.269279] CPU1 is up
[46845.269295] smpboot: Booting Node 0 Processor 2 APIC 0x1
[46845.270027] CPU2 is up
[46845.270043] smpboot: Booting Node 0 Processor 3 APIC 0x3
[46845.270740] CPU3 is up
[46845.273592] ACPI: PM: Waking up from system sleep state S3
[46845.304524] ACPI: EC: interrupt unblocked
[46845.321396] ACPI: EC: event unblocked
[46845.333789] nvme nvme0: 4/0/0 default/read/poll queues
[46845.548917] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[46845.572893] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[46845.714358] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[46845.828970] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[46846.084962] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[46846.224115] OOM killer enabled.
[46846.224118] Restarting tasks ... done.
[46846.225951] random: crng reseeded on system resumption
[46846.333128] PM: suspend exit
[46846.429471] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[46846.429486] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[46846.786648] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[46846.795760] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[46846.814587] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[46852.561553] wlp58s0: authenticate with 24:1f:bd:69:ac:95 (local address=9c:b6:d0:d1:6a:b1)
[46852.561580] wlp58s0: send auth to 24:1f:bd:69:ac:95 (try 1/3)
[46852.563180] wlp58s0: authenticated
[46852.564900] wlp58s0: associate with 24:1f:bd:69:ac:95 (try 1/3)
[46852.567772] wlp58s0: RX AssocResp from 24:1f:bd:69:ac:95 (capab=0x11 status=0 aid=1)
[46852.570966] wlp58s0: associated
[46852.585392] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:1f:bd:69:ac:95
[46943.706853] wlp58s0: deauthenticating from 24:1f:bd:69:ac:95 by local choice (Reason: 3=DEAUTH_LEAVING)
[46945.616415] PM: suspend entry (deep)
[46945.635268] Filesystems sync: 0.018 seconds
[46945.638039] Freezing user space processes
[46945.640083] Freezing user space processes completed (elapsed 0.002 seconds)
[46945.640086] OOM killer disabled.
[46945.640087] Freezing remaining freezable tasks
[46945.641695] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[46945.641748] printk: Suspending console(s) (use no_console_suspend to debug)
[46946.231339] ACPI: EC: interrupt blocked
[46946.257752] ACPI: PM: Preparing to enter system sleep state S3
[46946.267882] ACPI: EC: event blocked
[46946.267886] ACPI: EC: EC stopped
[46946.267888] ACPI: PM: Saving platform NVS memory
[46946.271215] Disabling non-boot CPUs ...
[46946.274273] smpboot: CPU 3 is now offline
[46946.277882] smpboot: CPU 2 is now offline
[46946.282918] smpboot: CPU 1 is now offline
[46946.288081] ACPI: PM: Low-level resume complete
[46946.288126] ACPI: EC: EC started
[46946.288127] ACPI: PM: Restoring platform NVS memory
[46946.290048] Enabling non-boot CPUs ...
[46946.290077] smpboot: Booting Node 0 Processor 1 APIC 0x2
[46946.290803] CPU1 is up
[46946.290817] smpboot: Booting Node 0 Processor 2 APIC 0x1
[46946.291571] CPU2 is up
[46946.291589] smpboot: Booting Node 0 Processor 3 APIC 0x3
[46946.292300] CPU3 is up
[46946.295129] ACPI: PM: Waking up from system sleep state S3
[46946.326968] ACPI: EC: interrupt unblocked
[46946.343453] ACPI: EC: event unblocked
[46946.356285] nvme nvme0: 4/0/0 default/read/poll queues
[46946.582641] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[46946.594690] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[46946.850699] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[46947.106688] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[46947.309595] OOM killer enabled.
[46947.309605] Restarting tasks ... done.
[46947.314431] random: crng reseeded on system resumption
[46947.428226] PM: suspend exit
[46947.512476] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[46947.512487] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[46947.834645] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[46947.867889] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[46947.892367] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[46953.466589] wlp58s0: authenticate with a4:9b:cd:c7:a3:ef (local address=9c:b6:d0:d1:6a:b1)
[46953.466595] wlp58s0: send auth to a4:9b:cd:c7:a3:ef (try 1/3)
[46953.480752] wlp58s0: authenticated
[46953.482626] wlp58s0: associate with a4:9b:cd:c7:a3:ef (try 1/3)
[46953.488910] wlp58s0: RX AssocResp from a4:9b:cd:c7:a3:ef (capab=0x1111 status=0 aid=3)
[46953.491524] wlp58s0: associated
[46953.591587] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:a3:ef
[46989.361932] wlp58s0: disassociated from a4:9b:cd:c7:a3:ef (Reason: 1=UNSPECIFIED)
[46989.536419] wlp58s0: authenticate with a4:9b:cd:c4:85:8f (local address=9c:b6:d0:d1:6a:b1)
[46989.536440] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 1/3)
[46990.110099] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 2/3)
[46991.126510] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 3/3)
[46991.520100] wlp58s0: authenticated
[46991.522488] wlp58s0: associate with a4:9b:cd:c4:85:8f (try 1/3)
[46991.558878] wlp58s0: RX AssocResp from a4:9b:cd:c4:85:8f (capab=0x1111 status=0 aid=9)
[46991.562354] wlp58s0: associated
[46991.609110] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c4:85:8f
[47029.090697] wlp58s0: disconnect from AP a4:9b:cd:c4:85:8f for new auth to a4:9b:cd:c7:a3:ef
[47029.171969] wlp58s0: authenticate with a4:9b:cd:c7:a3:ef (local address=9c:b6:d0:d1:6a:b1)
[47029.171986] wlp58s0: send auth to a4:9b:cd:c7:a3:ef (try 1/3)
[47029.175119] wlp58s0: authenticated
[47029.178204] wlp58s0: associate with a4:9b:cd:c7:a3:ef (try 1/3)
[47029.210029] wlp58s0: RX ReassocResp from a4:9b:cd:c7:a3:ef (capab=0x1111 status=0 aid=2)
[47029.212425] wlp58s0: associated
[47029.253793] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:a3:ef
[47141.698449] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[47142.499217] wlp58s0: authenticate with a4:9b:cd:c7:ab:2f (local address=9c:b6:d0:d1:6a:b1)
[47142.499244] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 1/3)
[47142.501043] wlp58s0: authenticated
[47142.509659] wlp58s0: associate with a4:9b:cd:c7:ab:2f (try 1/3)
[47142.519019] wlp58s0: RX AssocResp from a4:9b:cd:c7:ab:2f (capab=0x1111 status=0 aid=170)
[47142.522633] wlp58s0: associated
[47142.585272] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:ab:2f
[47180.041913] wlp58s0: disconnect from AP a4:9b:cd:c7:ab:2f for new auth to a4:9b:cd:c7:a3:ef
[47180.133930] wlp58s0: authenticate with a4:9b:cd:c7:a3:ef (local address=9c:b6:d0:d1:6a:b1)
[47180.133938] wlp58s0: send auth to a4:9b:cd:c7:a3:ef (try 1/3)
[47180.135224] wlp58s0: authenticated
[47180.141388] wlp58s0: associate with a4:9b:cd:c7:a3:ef (try 1/3)
[47180.148280] wlp58s0: RX ReassocResp from a4:9b:cd:c7:a3:ef (capab=0x1111 status=0 aid=4)
[47180.150766] wlp58s0: associated
[47180.165684] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:a3:ef
[47211.433771] wlp58s0: disconnect from AP a4:9b:cd:c7:a3:ef for new auth to a4:9b:cd:c7:ab:2f
[47211.513713] wlp58s0: authenticate with a4:9b:cd:c7:ab:2f (local address=9c:b6:d0:d1:6a:b1)
[47211.513719] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 1/3)
[47211.617319] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 2/3)
[47211.619570] wlp58s0: authenticated
[47211.625409] wlp58s0: associate with a4:9b:cd:c7:ab:2f (try 1/3)
[47211.631335] wlp58s0: RX ReassocResp from a4:9b:cd:c7:ab:2f (capab=0x1111 status=0 aid=173)
[47211.634494] wlp58s0: associated
[47211.650682] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:ab:2f
[47249.061247] wlp58s0: disconnect from AP a4:9b:cd:c7:ab:2f for new auth to a4:9b:cd:c4:85:8f
[47249.144675] wlp58s0: authenticate with a4:9b:cd:c4:85:8f (local address=9c:b6:d0:d1:6a:b1)
[47249.144684] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 1/3)
[47249.145795] wlp58s0: authenticated
[47249.161024] wlp58s0: associate with a4:9b:cd:c4:85:8f (try 1/3)
[47249.169807] wlp58s0: RX ReassocResp from a4:9b:cd:c4:85:8f (capab=0x1111 status=0 aid=10)
[47249.172217] wlp58s0: associated
[47249.210978] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c4:85:8f
[47286.549318] wlp58s0: disconnect from AP a4:9b:cd:c4:85:8f for new auth to a4:9b:cd:c7:a3:ef
[47286.628770] wlp58s0: authenticate with a4:9b:cd:c7:a3:ef (local address=9c:b6:d0:d1:6a:b1)
[47286.628778] wlp58s0: send auth to a4:9b:cd:c7:a3:ef (try 1/3)
[47286.630007] wlp58s0: authenticated
[47286.632825] wlp58s0: associate with a4:9b:cd:c7:a3:ef (try 1/3)
[47286.638196] wlp58s0: RX ReassocResp from a4:9b:cd:c7:a3:ef (capab=0x1111 status=0 aid=2)
[47286.641001] wlp58s0: associated
[47286.649249] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:a3:ef
[47305.049220] wlp58s0: disconnect from AP a4:9b:cd:c7:a3:ef for new auth to a4:9b:cd:c7:ab:2f
[47305.126810] wlp58s0: authenticate with a4:9b:cd:c7:ab:2f (local address=9c:b6:d0:d1:6a:b1)
[47305.126826] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 1/3)
[47305.128645] wlp58s0: authenticated
[47305.136798] wlp58s0: associate with a4:9b:cd:c7:ab:2f (try 1/3)
[47305.143351] wlp58s0: RX ReassocResp from a4:9b:cd:c7:ab:2f (capab=0x1111 status=0 aid=176)
[47305.146614] wlp58s0: associated
[47305.249063] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:ab:2f
[47342.518977] wlp58s0: disconnect from AP a4:9b:cd:c7:ab:2f for new auth to a4:9b:cd:c7:a3:ef
[47342.597218] wlp58s0: authenticate with a4:9b:cd:c7:a3:ef (local address=9c:b6:d0:d1:6a:b1)
[47342.597233] wlp58s0: send auth to a4:9b:cd:c7:a3:ef (try 1/3)
[47342.598638] wlp58s0: authenticated
[47342.604594] wlp58s0: associate with a4:9b:cd:c7:a3:ef (try 1/3)
[47342.636042] wlp58s0: RX ReassocResp from a4:9b:cd:c7:a3:ef (capab=0x1111 status=0 aid=7)
[47342.638642] wlp58s0: associated
[47342.726112] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:a3:ef
[47402.512536] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[47402.556359] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[47403.497595] wlp58s0: authenticate with a4:9b:cd:c4:85:8f (local address=9c:b6:d0:d1:6a:b1)
[47403.497620] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 1/3)
[47403.499320] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 2/3)
[47403.500622] wlp58s0: send auth to a4:9b:cd:c4:85:8f (try 3/3)
[47403.501856] wlp58s0: authentication with a4:9b:cd:c4:85:8f timed out
[47404.547189] wlp58s0: authenticate with a4:9b:cd:c7:aa:ef (local address=9c:b6:d0:d1:6a:b1)
[47404.547209] wlp58s0: send auth to a4:9b:cd:c7:aa:ef (try 1/3)
[47404.548367] wlp58s0: authenticated
[47404.552214] wlp58s0: associate with a4:9b:cd:c7:aa:ef (try 1/3)
[47404.559226] wlp58s0: RX AssocResp from a4:9b:cd:c7:aa:ef (capab=0x1111 status=0 aid=1)
[47404.561968] wlp58s0: associated
[47404.572484] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:aa:ef
[47417.655140] wlp58s0: authenticate with a4:9b:cd:c7:ab:2f (local address=9c:b6:d0:d1:6a:b1)
[47417.655164] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 1/3)
[47417.656392] wlp58s0: authenticated
[47417.660163] wlp58s0: associate with a4:9b:cd:c7:ab:2f (try 1/3)
[47417.668182] wlp58s0: RX AssocResp from a4:9b:cd:c7:ab:2f (capab=0x1111 status=0 aid=180)
[47417.671315] wlp58s0: associated
[47417.711886] wlp58s0: Limiting TX power to 14 (17 - 3) dBm as advertised by a4:9b:cd:c7:ab:2f
[47430.416354] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[47430.424160] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[47431.197066] wlp58s0: authenticate with a4:9b:cd:c7:aa:ef (local address=9c:b6:d0:d1:6a:b1)
[47431.197092] wlp58s0: send auth to a4:9b:cd:c7:aa:ef (try 1/3)
[47431.198778] wlp58s0: send auth to a4:9b:cd:c7:aa:ef (try 2/3)
[47431.200093] wlp58s0: send auth to a4:9b:cd:c7:aa:ef (try 3/3)
[47431.201559] wlp58s0: authentication with a4:9b:cd:c7:aa:ef timed out
[47436.640108] wlp58s0: authenticate with a4:9b:cd:c7:ab:2f (local address=9c:b6:d0:d1:6a:b1)
[47436.640114] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 1/3)
[47436.642470] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 2/3)
[47436.643666] wlp58s0: send auth to a4:9b:cd:c7:ab:2f (try 3/3)
[47436.644943] wlp58s0: authentication with a4:9b:cd:c7:ab:2f timed out
[47608.382649] wlp58s0: authenticate with 78:72:5d:f5:2c:9f (local address=9c:b6:d0:d1:6a:b1)
[47608.382654] wlp58s0: send auth to 78:72:5d:f5:2c:9f (try 1/3)
[47608.384080] wlp58s0: authenticated
[47608.387126] wlp58s0: associate with 78:72:5d:f5:2c:9f (try 1/3)
[47608.391122] wlp58s0: associate with 78:72:5d:f5:2c:9f (try 2/3)
[47608.395339] wlp58s0: RX AssocResp from 78:72:5d:f5:2c:9f (capab=0x1111 status=0 aid=1)
[47608.397635] wlp58s0: associated
[47608.487503] wlp58s0: Limiting TX power to 17 dBm as advertised by 78:72:5d:f5:2c:9f
[47608.883573] wlp58s0: deauthenticating from 78:72:5d:f5:2c:9f by local choice (Reason: 3=DEAUTH_LEAVING)
[47765.276438] wlp58s0: authenticate with 2c:57:41:97:3d:8f (local address=9c:b6:d0:d1:6a:b1)
[47765.276452] wlp58s0: send auth to 2c:57:41:97:3d:8f (try 1/3)
[47765.277897] wlp58s0: send auth to 2c:57:41:97:3d:8f (try 2/3)
[47765.279509] wlp58s0: send auth to 2c:57:41:97:3d:8f (try 3/3)
[47765.382336] wlp58s0: authentication with 2c:57:41:97:3d:8f timed out
[47766.250076] wlp58s0: authenticate with 2c:57:41:97:3d:80 (local address=9c:b6:d0:d1:6a:b1)
[47766.250083] wlp58s0: send auth to 2c:57:41:97:3d:80 (try 1/3)
[47766.254036] wlp58s0: authenticated
[47766.258268] wlp58s0: associate with 2c:57:41:97:3d:80 (try 1/3)
[47766.362286] wlp58s0: associate with 2c:57:41:97:3d:80 (try 2/3)
[47766.466306] wlp58s0: associate with 2c:57:41:97:3d:80 (try 3/3)
[47766.570318] wlp58s0: association with 2c:57:41:97:3d:80 timed out
[47767.673743] wlp58s0: authenticate with 00:fe:c8:8c:5e:ef (local address=9c:b6:d0:d1:6a:b1)
[47767.673758] wlp58s0: send auth to 00:fe:c8:8c:5e:ef (try 1/3)
[47767.674665] wlp58s0: authenticated
[47767.686865] wlp58s0: associate with 00:fe:c8:8c:5e:ef (try 1/3)
[47767.690102] wlp58s0: RX AssocResp from 00:fe:c8:8c:5e:ef (capab=0x1111 status=0 aid=3)
[47767.693720] wlp58s0: associated
[47767.742147] wlp58s0: Limiting TX power to 17 dBm as advertised by 00:fe:c8:8c:5e:ef
[47794.190321] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[47794.199056] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[47795.193259] wlp58s0: authenticate with 2c:57:41:97:7c:e0 (local address=9c:b6:d0:d1:6a:b1)
[47795.193283] wlp58s0: send auth to 2c:57:41:97:7c:e0 (try 1/3)
[47795.194895] wlp58s0: send auth to 2c:57:41:97:7c:e0 (try 2/3)
[47795.197528] wlp58s0: send auth to 2c:57:41:97:7c:e0 (try 3/3)
[47795.203374] wlp58s0: authentication with 2c:57:41:97:7c:e0 timed out
[47796.609089] wlp58s0: authenticate with 2c:57:41:97:7c:ef (local address=9c:b6:d0:d1:6a:b1)
[47796.609109] wlp58s0: send auth to 2c:57:41:97:7c:ef (try 1/3)
[47796.611289] wlp58s0: send auth to 2c:57:41:97:7c:ef (try 2/3)
[47796.612653] wlp58s0: send auth to 2c:57:41:97:7c:ef (try 3/3)
[47796.614035] wlp58s0: authentication with 2c:57:41:97:7c:ef timed out
[47797.993041] wlp58s0: authenticate with 00:fe:c8:8c:5e:ef (local address=9c:b6:d0:d1:6a:b1)
[47797.993056] wlp58s0: send auth to 00:fe:c8:8c:5e:ef (try 1/3)
[47797.994413] wlp58s0: send auth to 00:fe:c8:8c:5e:ef (try 2/3)
[47797.995730] wlp58s0: send auth to 00:fe:c8:8c:5e:ef (try 3/3)
[47797.997289] wlp58s0: authentication with 00:fe:c8:8c:5e:ef timed out
[48289.399698] wlp58s0: authenticate with a8:3a:79:0e:7f:c3 (local address=9c:b6:d0:d1:6a:b1)
[48289.399711] wlp58s0: send auth to a8:3a:79:0e:7f:c3 (try 1/3)
[48289.404909] wlp58s0: send auth to a8:3a:79:0e:7f:c3 (try 2/3)
[48289.410259] wlp58s0: send auth to a8:3a:79:0e:7f:c3 (try 3/3)
[48289.463925] wlp58s0: authenticated
[48289.467532] wlp58s0: associate with a8:3a:79:0e:7f:c3 (try 1/3)
[48289.505747] wlp58s0: RX AssocResp from a8:3a:79:0e:7f:c3 (capab=0x1421 status=0 aid=61)
[48289.508804] wlp58s0: associated
[48289.511544] wlp58s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:3a:79:0e:7f:c3
[48317.360731] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA a8:3a:79:0e:7f:c3
[48318.501262] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA a8:3a:79:0e:7f:c3
[48319.677957] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA a8:3a:79:0e:7f:c3
[48320.858854] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA a8:3a:79:0e:7f:c3
[48321.803546] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[48321.812690] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[48322.208218] wlp58s0: authenticate with a8:3a:79:0e:7f:c3 (local address=9c:b6:d0:d1:6a:b1)
[48322.208249] wlp58s0: send auth to a8:3a:79:0e:7f:c3 (try 1/3)
[48322.213221] wlp58s0: send auth to a8:3a:79:0e:7f:c3 (try 2/3)
[48322.218080] wlp58s0: send auth to a8:3a:79:0e:7f:c3 (try 3/3)
[48322.223142] wlp58s0: authentication with a8:3a:79:0e:7f:c3 timed out
[48411.144565] wlp58s0: authenticate with 14:16:9d:19:28:8f (local address=9c:b6:d0:d1:6a:b1)
[48411.144578] wlp58s0: send auth to 14:16:9d:19:28:8f (try 1/3)
[48411.146557] wlp58s0: authenticated
[48411.150849] wlp58s0: associate with 14:16:9d:19:28:8f (try 1/3)
[48411.254931] wlp58s0: associate with 14:16:9d:19:28:8f (try 2/3)
[48411.359820] wlp58s0: associate with 14:16:9d:19:28:8f (try 3/3)
[48411.363819] wlp58s0: association with 14:16:9d:19:28:8f timed out
[48416.379880] wlp58s0: authenticate with 14:16:9d:1f:11:6f (local address=9c:b6:d0:d1:6a:b1)
[48416.379895] wlp58s0: send auth to 14:16:9d:1f:11:6f (try 1/3)
[48416.381320] wlp58s0: send auth to 14:16:9d:1f:11:6f (try 2/3)
[48416.382812] wlp58s0: send auth to 14:16:9d:1f:11:6f (try 3/3)
[48416.384108] wlp58s0: authentication with 14:16:9d:1f:11:6f timed out
[48421.825928] wlp58s0: authenticate with 14:16:9d:19:28:8f (local address=9c:b6:d0:d1:6a:b1)
[48421.825944] wlp58s0: send auth to 14:16:9d:19:28:8f (try 1/3)
[48421.827311] wlp58s0: send auth to 14:16:9d:19:28:8f (try 2/3)
[48421.828751] wlp58s0: send auth to 14:16:9d:19:28:8f (try 3/3)
[48421.830012] wlp58s0: authentication with 14:16:9d:19:28:8f timed out
[48520.772903] wlp58s0: authenticate with 76:42:7f:42:10:af (local address=9c:b6:d0:d1:6a:b1)
[48520.772910] wlp58s0: send auth to 76:42:7f:42:10:af (try 1/3)
[48520.777539] wlp58s0: authenticated
[48520.778238] wlp58s0: associate with 76:42:7f:42:10:af (try 1/3)
[48520.783525] wlp58s0: RX AssocResp from 76:42:7f:42:10:af (capab=0x1511 status=0 aid=1)
[48520.786847] wlp58s0: associated
[48520.836737] wlp58s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 76:42:7f:42:10:af
[48524.828845] wlp58s0: disassociated from 76:42:7f:42:10:af (Reason: 2=PREV_AUTH_NOT_VALID)
[48577.107085] PM: suspend entry (deep)
[48577.122041] Filesystems sync: 0.014 seconds
[48577.126581] Freezing user space processes
[48577.128517] Freezing user space processes completed (elapsed 0.001 seconds)
[48577.128521] OOM killer disabled.
[48577.128522] Freezing remaining freezable tasks
[48577.130135] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[48577.130186] printk: Suspending console(s) (use no_console_suspend to debug)
[48577.736567] ACPI: EC: interrupt blocked
[48577.765426] ACPI: PM: Preparing to enter system sleep state S3
[48577.777008] ACPI: EC: event blocked
[48577.777013] ACPI: EC: EC stopped
[48577.777014] ACPI: PM: Saving platform NVS memory
[48577.780345] Disabling non-boot CPUs ...
[48577.782362] smpboot: CPU 3 is now offline
[48577.788285] smpboot: CPU 2 is now offline
[48577.791766] smpboot: CPU 1 is now offline
[48577.801048] ACPI: PM: Low-level resume complete
[48577.801092] ACPI: EC: EC started
[48577.801093] ACPI: PM: Restoring platform NVS memory
[48577.802972] Enabling non-boot CPUs ...
[48577.803003] smpboot: Booting Node 0 Processor 1 APIC 0x2
[48577.803707] CPU1 is up
[48577.803725] smpboot: Booting Node 0 Processor 2 APIC 0x1
[48577.804485] CPU2 is up
[48577.804501] smpboot: Booting Node 0 Processor 3 APIC 0x3
[48577.805200] CPU3 is up
[48577.808036] ACPI: PM: Waking up from system sleep state S3
[48577.837273] ACPI: EC: interrupt unblocked
[48577.872060] ACPI: EC: event unblocked
[48577.884763] nvme nvme0: 4/0/0 default/read/poll queues
[48578.110215] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[48578.122240] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[48578.378231] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[48578.634223] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[48578.837156] OOM killer enabled.
[48578.837160] Restarting tasks ... done.
[48578.838538] random: crng reseeded on system resumption
[48578.975919] PM: suspend exit
[48579.050099] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[48579.050116] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[48579.330244] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[48579.409721] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[48579.431945] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[48591.865499] wlp58s0: authenticate with dc:15:c8:46:1c:4b (local address=9c:b6:d0:d1:6a:b1)
[48591.865517] wlp58s0: send auth to dc:15:c8:46:1c:4b (try 1/3)
[48591.871593] wlp58s0: authenticated
[48591.874166] wlp58s0: associate with dc:15:c8:46:1c:4b (try 1/3)
[48591.879179] wlp58s0: RX AssocResp from dc:15:c8:46:1c:4b (capab=0x1511 status=0 aid=5)
[48591.882055] wlp58s0: associated
[48591.950690] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by dc:15:c8:46:1c:4b
[50012.844006] wlp58s0: deauthenticating from dc:15:c8:46:1c:4b by local choice (Reason: 3=DEAUTH_LEAVING)
[50016.010853] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer dc:15:c8:46:1c:4b: -110
[50016.010878] wlp58s0: failed to remove key (0, dc:15:c8:46:1c:4b) from hardware (-110)
[50016.636100] PM: suspend entry (deep)
[50016.645333] Filesystems sync: 0.009 seconds
[50016.660570] Freezing user space processes
[50016.663087] Freezing user space processes completed (elapsed 0.002 seconds)
[50016.663098] OOM killer disabled.
[50016.663101] Freezing remaining freezable tasks
[50016.665122] Freezing remaining freezable tasks completed (elapsed 0.002 seconds)
[50016.665240] printk: Suspending console(s) (use no_console_suspend to debug)
[50017.261440] ACPI: EC: interrupt blocked
[50017.290056] ACPI: PM: Preparing to enter system sleep state S3
[50017.300113] ACPI: EC: event blocked
[50017.300118] ACPI: EC: EC stopped
[50017.300120] ACPI: PM: Saving platform NVS memory
[50017.303346] Disabling non-boot CPUs ...
[50017.305376] smpboot: CPU 3 is now offline
[50017.310560] smpboot: CPU 2 is now offline
[50017.313283] smpboot: CPU 1 is now offline
[50017.321490] ACPI: PM: Low-level resume complete
[50017.321534] ACPI: EC: EC started
[50017.321535] ACPI: PM: Restoring platform NVS memory
[50017.323455] Enabling non-boot CPUs ...
[50017.323486] smpboot: Booting Node 0 Processor 1 APIC 0x2
[50017.324200] CPU1 is up
[50017.324216] smpboot: Booting Node 0 Processor 2 APIC 0x1
[50017.324994] CPU2 is up
[50017.325009] smpboot: Booting Node 0 Processor 3 APIC 0x3
[50017.325709] CPU3 is up
[50017.328535] ACPI: PM: Waking up from system sleep state S3
[50017.362506] ACPI: EC: interrupt unblocked
[50017.378802] ACPI: EC: event unblocked
[50017.391435] nvme nvme0: 4/0/0 default/read/poll queues
[50017.612768] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[50017.628862] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[50017.888793] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[50018.144833] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[50018.347879] OOM killer enabled.
[50018.347882] Restarting tasks ... done.
[50018.351414] random: crng reseeded on system resumption
[50018.479263] PM: suspend exit
[50018.550609] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[50018.550615] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[50018.855498] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[50018.913536] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[50018.938518] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[50024.433324] wlp58s0: authenticate with dc:15:c8:46:1c:4b (local address=9c:b6:d0:d1:6a:b1)
[50024.433342] wlp58s0: send auth to dc:15:c8:46:1c:4b (try 1/3)
[50024.439650] wlp58s0: authenticated
[50024.440844] wlp58s0: associate with dc:15:c8:46:1c:4b (try 1/3)
[50024.451618] wlp58s0: RX AssocResp from dc:15:c8:46:1c:4b (capab=0x1511 status=0 aid=5)
[50024.454802] wlp58s0: associated
[50024.545357] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by dc:15:c8:46:1c:4b
[50402.589238] wlp58s0: deauthenticating from dc:15:c8:46:1c:4b by local choice (Reason: 3=DEAUTH_LEAVING)
[50404.206734] PM: suspend entry (deep)
[50404.232600] Filesystems sync: 0.025 seconds
[50404.241058] Freezing user space processes
[50404.243358] Freezing user space processes completed (elapsed 0.002 seconds)
[50404.243370] OOM killer disabled.
[50404.243373] Freezing remaining freezable tasks
[50404.245431] Freezing remaining freezable tasks completed (elapsed 0.002 seconds)
[50404.245543] printk: Suspending console(s) (use no_console_suspend to debug)
[50404.835662] ACPI: EC: interrupt blocked
[50404.861357] ACPI: PM: Preparing to enter system sleep state S3
[50404.871582] ACPI: EC: event blocked
[50404.871586] ACPI: EC: EC stopped
[50404.871589] ACPI: PM: Saving platform NVS memory
[50404.874888] Disabling non-boot CPUs ...
[50404.876927] smpboot: CPU 3 is now offline
[50404.880993] smpboot: CPU 2 is now offline
[50404.883516] smpboot: CPU 1 is now offline
[50404.890953] ACPI: PM: Low-level resume complete
[50404.890997] ACPI: EC: EC started
[50404.890998] ACPI: PM: Restoring platform NVS memory
[50404.892916] Enabling non-boot CPUs ...
[50404.892946] smpboot: Booting Node 0 Processor 1 APIC 0x2
[50404.893658] CPU1 is up
[50404.893675] smpboot: Booting Node 0 Processor 2 APIC 0x1
[50404.894420] CPU2 is up
[50404.894437] smpboot: Booting Node 0 Processor 3 APIC 0x3
[50404.895140] CPU3 is up
[50404.898016] ACPI: PM: Waking up from system sleep state S3
[50404.930391] ACPI: EC: interrupt unblocked
[50404.944347] ACPI: EC: event unblocked
[50404.956536] nvme nvme0: 4/0/0 default/read/poll queues
[50405.181014] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[50405.193005] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[50405.351423] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[50405.449064] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[50405.705037] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[50405.849015] OOM killer enabled.
[50405.849018] Restarting tasks ... done.
[50405.850743] random: crng reseeded on system resumption
[50405.965959] PM: suspend exit
[50406.052345] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[50406.052361] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[50406.407148] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[50406.424722] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[50406.434398] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[50411.879336] wlp58s0: authenticate with dc:15:c8:46:1c:4b (local address=9c:b6:d0:d1:6a:b1)
[50411.879343] wlp58s0: send auth to dc:15:c8:46:1c:4b (try 1/3)
[50411.886483] wlp58s0: authenticated
[50411.888983] wlp58s0: associate with dc:15:c8:46:1c:4b (try 1/3)
[50411.898783] wlp58s0: RX AssocResp from dc:15:c8:46:1c:4b (capab=0x1511 status=0 aid=5)
[50411.901567] wlp58s0: associated
[50411.965155] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by dc:15:c8:46:1c:4b
[51308.038697] wlp58s0: deauthenticating from dc:15:c8:46:1c:4b by local choice (Reason: 3=DEAUTH_LEAVING)
[51311.376519] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer dc:15:c8:46:1c:4b: -110
[51311.376544] wlp58s0: failed to remove key (0, dc:15:c8:46:1c:4b) from hardware (-110)
[51311.994386] PM: suspend entry (deep)
[51312.019620] Filesystems sync: 0.025 seconds
[51312.022694] Freezing user space processes
[51312.024483] Freezing user space processes completed (elapsed 0.001 seconds)
[51312.024486] OOM killer disabled.
[51312.024487] Freezing remaining freezable tasks
[51312.026088] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[51312.026142] printk: Suspending console(s) (use no_console_suspend to debug)
[51312.623022] ACPI: EC: interrupt blocked
[51312.651887] ACPI: PM: Preparing to enter system sleep state S3
[51312.662074] ACPI: EC: event blocked
[51312.662079] ACPI: EC: EC stopped
[51312.662081] ACPI: PM: Saving platform NVS memory
[51312.665316] Disabling non-boot CPUs ...
[51312.668665] smpboot: CPU 3 is now offline
[51312.674179] smpboot: CPU 2 is now offline
[51312.678656] smpboot: CPU 1 is now offline
[51312.683951] ACPI: PM: Low-level resume complete
[51312.683995] ACPI: EC: EC started
[51312.683996] ACPI: PM: Restoring platform NVS memory
[51312.685892] Enabling non-boot CPUs ...
[51312.685923] smpboot: Booting Node 0 Processor 1 APIC 0x2
[51312.686975] CPU1 is up
[51312.686993] smpboot: Booting Node 0 Processor 2 APIC 0x1
[51312.687743] CPU2 is up
[51312.687760] smpboot: Booting Node 0 Processor 3 APIC 0x3
[51312.688463] CPU3 is up
[51312.691294] ACPI: PM: Waking up from system sleep state S3
[51312.728643] ACPI: EC: interrupt unblocked
[51312.744099] ACPI: EC: event unblocked
[51312.756446] nvme nvme0: 4/0/0 default/read/poll queues
[51312.978456] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[51312.998463] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[51313.143378] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[51313.258439] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[51313.514480] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[51313.716763] OOM killer enabled.
[51313.716767] Restarting tasks ... done.
[51313.718776] random: crng reseeded on system resumption
[51313.855925] PM: suspend exit
[51313.921029] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[51313.921044] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[51314.214052] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[51314.281278] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[51314.305263] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[51319.756917] wlp58s0: authenticate with dc:15:c8:46:1c:4b (local address=9c:b6:d0:d1:6a:b1)
[51319.756923] wlp58s0: send auth to dc:15:c8:46:1c:4b (try 1/3)
[51319.762455] wlp58s0: authenticated
[51319.770425] wlp58s0: associate with dc:15:c8:46:1c:4b (try 1/3)
[51319.775071] wlp58s0: RX AssocResp from dc:15:c8:46:1c:4b (capab=0x1511 status=0 aid=5)
[51319.777639] wlp58s0: associated
[51319.855666] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by dc:15:c8:46:1c:4b
[52764.930624] audit: type=1400 audit(1742592751.247:349): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/etc/paperspecs" pid=299896 comm="paperconf" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[53995.882860] audit: type=1400 audit(1742593986.180:350): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/etc/paperspecs" pid=301266 comm="paperconf" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[53996.746862] audit: type=1400 audit(1742593987.044:351): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/profiles.ini" pid=301254 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272
[53996.758678] audit: type=1400 audit(1742593987.056:352): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/cert9.db" pid=301254 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=5272 ouid=5272
[53996.759215] audit: type=1400 audit(1742593987.056:353): apparmor="ALLOWED" operation="file_lock" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/cert9.db" pid=301254 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=5272 ouid=5272
[53996.760172] audit: type=1400 audit(1742593987.060:354): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/key4.db" pid=301254 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=5272 ouid=5272
[53996.760177] audit: type=1400 audit(1742593987.060:355): apparmor="ALLOWED" operation="file_lock" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/key4.db" pid=301254 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=5272 ouid=5272
[54069.059999] wlp58s0: deauthenticating from dc:15:c8:46:1c:4b by local choice (Reason: 3=DEAUTH_LEAVING)
[54072.327772] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer dc:15:c8:46:1c:4b: -110
[54072.327795] wlp58s0: failed to remove key (0, dc:15:c8:46:1c:4b) from hardware (-110)
[54072.937475] PM: suspend entry (deep)
[54072.964072] Filesystems sync: 0.026 seconds
[54072.973221] Freezing user space processes
[54072.976176] Freezing user space processes completed (elapsed 0.002 seconds)
[54072.976188] OOM killer disabled.
[54072.976191] Freezing remaining freezable tasks
[54072.978291] Freezing remaining freezable tasks completed (elapsed 0.002 seconds)
[54072.978411] printk: Suspending console(s) (use no_console_suspend to debug)
[54073.578746] ACPI: EC: interrupt blocked
[54073.607276] ACPI: PM: Preparing to enter system sleep state S3
[54073.621931] ACPI: EC: event blocked
[54073.621936] ACPI: EC: EC stopped
[54073.621938] ACPI: PM: Saving platform NVS memory
[54073.625369] Disabling non-boot CPUs ...
[54073.628763] smpboot: CPU 3 is now offline
[54073.633590] smpboot: CPU 2 is now offline
[54073.636259] smpboot: CPU 1 is now offline
[54073.644760] ACPI: PM: Low-level resume complete
[54073.644806] ACPI: EC: EC started
[54073.644807] ACPI: PM: Restoring platform NVS memory
[54073.646686] Enabling non-boot CPUs ...
[54073.646718] smpboot: Booting Node 0 Processor 1 APIC 0x2
[54073.647622] CPU1 is up
[54073.647640] smpboot: Booting Node 0 Processor 2 APIC 0x1
[54073.648384] CPU2 is up
[54073.648401] smpboot: Booting Node 0 Processor 3 APIC 0x3
[54073.649097] CPU3 is up
[54073.651922] ACPI: PM: Waking up from system sleep state S3
[54073.692346] ACPI: EC: interrupt unblocked
[54073.709821] ACPI: EC: event unblocked
[54073.722584] nvme nvme0: 4/0/0 default/read/poll queues
[54073.963704] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[54073.971613] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[54074.148809] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[54074.219659] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[54074.479636] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[54074.625446] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[54074.625455] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[54074.625980] OOM killer enabled.
[54074.625984] Restarting tasks ... done.
[54074.631135] random: crng reseeded on system resumption
[54074.839237] PM: suspend exit
[54074.983094] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[54075.015400] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[54075.168672] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[54080.622109] wlp58s0: authenticate with f4:db:e6:bb:53:0f (local address=9c:b6:d0:d1:6a:b1)
[54080.622120] wlp58s0: send auth to f4:db:e6:bb:53:0f (try 1/3)
[54080.623064] wlp58s0: authenticated
[54080.623586] wlp58s0: associate with f4:db:e6:bb:53:0f (try 1/3)
[54080.633062] wlp58s0: RX AssocResp from f4:db:e6:bb:53:0f (capab=0x1101 status=0 aid=2)
[54080.635746] wlp58s0: associated
[54080.681129] wlp58s0: Limiting TX power to 13 dBm as advertised by f4:db:e6:bb:53:0f
[54117.744717] wlp58s0: disconnect from AP f4:db:e6:bb:53:0f for new auth to f4:db:e6:bb:4d:60
[54117.867795] wlp58s0: authenticate with f4:db:e6:bb:4d:60 (local address=9c:b6:d0:d1:6a:b1)
[54117.867803] wlp58s0: send auth to f4:db:e6:bb:4d:60 (try 1/3)
[54117.869500] wlp58s0: authenticated
[54117.871494] wlp58s0: associate with f4:db:e6:bb:4d:60 (try 1/3)
[54117.881205] wlp58s0: RX ReassocResp from f4:db:e6:bb:4d:60 (capab=0x1401 status=0 aid=7)
[54117.884804] wlp58s0: associated
[54118.830680] wlp58s0: Limiting TX power to 5 dBm as advertised by f4:db:e6:bb:4d:60
[54155.030225] wlp58s0: disconnect from AP f4:db:e6:bb:4d:60 for new auth to f4:db:e6:bb:50:40
[54155.140043] wlp58s0: authenticate with f4:db:e6:bb:50:40 (local address=9c:b6:d0:d1:6a:b1)
[54155.140048] wlp58s0: send auth to f4:db:e6:bb:50:40 (try 1/3)
[54155.141482] wlp58s0: authenticated
[54155.143150] wlp58s0: associate with f4:db:e6:bb:50:40 (try 1/3)
[54155.153872] wlp58s0: RX ReassocResp from f4:db:e6:bb:50:40 (capab=0x1401 status=0 aid=1)
[54155.156540] wlp58s0: associated
[54156.595300] wlp58s0: Limiting TX power to 5 dBm as advertised by f4:db:e6:bb:50:40
[54189.839067] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[54189.847264] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[54194.760465] wlp58s0: authenticate with f4:db:e6:bb:4d:6f (local address=9c:b6:d0:d1:6a:b1)
[54194.760478] wlp58s0: send auth to f4:db:e6:bb:4d:6f (try 1/3)
[54194.761459] wlp58s0: authenticated
[54194.767017] wlp58s0: associate with f4:db:e6:bb:4d:6f (try 1/3)
[54194.775183] wlp58s0: RX AssocResp from f4:db:e6:bb:4d:6f (capab=0x1101 status=0 aid=7)
[54194.778664] wlp58s0: associated
[54194.858556] wlp58s0: Limiting TX power to 13 dBm as advertised by f4:db:e6:bb:4d:6f
[54268.686168] wlp58s0: disconnect from AP f4:db:e6:bb:4d:6f for new auth to f4:db:e6:bb:53:0f
[54268.795108] wlp58s0: authenticate with f4:db:e6:bb:53:0f (local address=9c:b6:d0:d1:6a:b1)
[54268.795127] wlp58s0: send auth to f4:db:e6:bb:53:0f (try 1/3)
[54268.796333] wlp58s0: send auth to f4:db:e6:bb:53:0f (try 2/3)
[54268.798180] wlp58s0: send auth to f4:db:e6:bb:53:0f (try 3/3)
[54268.799320] wlp58s0: authentication with f4:db:e6:bb:53:0f timed out
[54269.904562] wlp58s0: authenticate with f4:db:e6:bb:4d:8f (local address=9c:b6:d0:d1:6a:b1)
[54269.904580] wlp58s0: send auth to f4:db:e6:bb:4d:8f (try 1/3)
[54269.905660] wlp58s0: authenticated
[54269.910559] wlp58s0: associate with f4:db:e6:bb:4d:8f (try 1/3)
[54269.920103] wlp58s0: RX AssocResp from f4:db:e6:bb:4d:8f (capab=0x1101 status=0 aid=2)
[54269.923189] wlp58s0: associated
[54270.090076] wlp58s0: Limiting TX power to 13 dBm as advertised by f4:db:e6:bb:4d:8f
[54284.814716] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[54284.821970] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[54285.448116] wlp58s0: authenticate with f4:db:e6:bb:4d:6f (local address=9c:b6:d0:d1:6a:b1)
[54285.448124] wlp58s0: send auth to f4:db:e6:bb:4d:6f (try 1/3)
[54285.449440] wlp58s0: send auth to f4:db:e6:bb:4d:6f (try 2/3)
[54285.450505] wlp58s0: send auth to f4:db:e6:bb:4d:6f (try 3/3)
[54285.451596] wlp58s0: authentication with f4:db:e6:bb:4d:6f timed out
[54286.516035] wlp58s0: authenticate with f4:db:e6:bb:4e:cf (local address=9c:b6:d0:d1:6a:b1)
[54286.516046] wlp58s0: send auth to f4:db:e6:bb:4e:cf (try 1/3)
[54286.517175] wlp58s0: send auth to f4:db:e6:bb:4e:cf (try 2/3)
[54286.518458] wlp58s0: send auth to f4:db:e6:bb:4e:cf (try 3/3)
[54286.519582] wlp58s0: authentication with f4:db:e6:bb:4e:cf timed out
[54287.771781] wlp58s0: authenticate with f4:db:e6:c8:4f:2f (local address=9c:b6:d0:d1:6a:b1)
[54287.771790] wlp58s0: send auth to f4:db:e6:c8:4f:2f (try 1/3)
[54287.772978] wlp58s0: send auth to f4:db:e6:c8:4f:2f (try 2/3)
[54287.774103] wlp58s0: send auth to f4:db:e6:c8:4f:2f (try 3/3)
[54287.775237] wlp58s0: authentication with f4:db:e6:c8:4f:2f timed out
[54342.235318] wlp58s0: authenticate with 04:f0:21:64:db:8c (local address=9c:b6:d0:d1:6a:b1)
[54342.235333] wlp58s0: send auth to 04:f0:21:64:db:8c (try 1/3)
[54342.240299] wlp58s0: send auth to 04:f0:21:64:db:8c (try 2/3)
[54342.246059] wlp58s0: send auth to 04:f0:21:64:db:8c (try 3/3)
[54342.251390] wlp58s0: authentication with 04:f0:21:64:db:8c timed out
[54550.285192] PM: suspend entry (deep)
[54550.309693] Filesystems sync: 0.024 seconds
[54550.312528] Freezing user space processes
[54550.314428] Freezing user space processes completed (elapsed 0.001 seconds)
[54550.314432] OOM killer disabled.
[54550.314433] Freezing remaining freezable tasks
[54550.316039] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[54550.316091] printk: Suspending console(s) (use no_console_suspend to debug)
[54550.904027] ACPI: EC: interrupt blocked
[54550.932950] ACPI: PM: Preparing to enter system sleep state S3
[54550.944875] ACPI: EC: event blocked
[54550.944881] ACPI: EC: EC stopped
[54550.944882] ACPI: PM: Saving platform NVS memory
[54550.948174] Disabling non-boot CPUs ...
[54550.951238] smpboot: CPU 3 is now offline
[54550.955145] smpboot: CPU 2 is now offline
[54550.957680] smpboot: CPU 1 is now offline
[54550.964049] ACPI: PM: Low-level resume complete
[54550.964094] ACPI: EC: EC started
[54550.964095] ACPI: PM: Restoring platform NVS memory
[54550.966011] Enabling non-boot CPUs ...
[54550.966037] smpboot: Booting Node 0 Processor 1 APIC 0x2
[54550.966756] CPU1 is up
[54550.966770] smpboot: Booting Node 0 Processor 2 APIC 0x1
[54550.967542] CPU2 is up
[54550.967558] smpboot: Booting Node 0 Processor 3 APIC 0x3
[54550.968251] CPU3 is up
[54550.971069] ACPI: PM: Waking up from system sleep state S3
[54550.998406] ACPI: EC: interrupt unblocked
[54551.061565] ACPI: EC: event unblocked
[54551.075478] nvme nvme0: 4/0/0 default/read/poll queues
[54551.311462] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[54551.319475] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[54551.482260] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[54551.575466] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[54551.831524] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[54551.972097] OOM killer enabled.
[54551.972108] Restarting tasks ... done.
[54551.975500] random: crng reseeded on system resumption
[54552.114726] PM: suspend exit
[54552.174150] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[54552.174164] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[54552.500947] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[54552.534843] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[54552.557189] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[54557.617946] wlp58s0: authenticate with 6c:31:0e:b5:f4:af (local address=9c:b6:d0:d1:6a:b1)
[54557.617991] wlp58s0: send auth to 6c:31:0e:b5:f4:af (try 1/3)
[54557.619039] wlp58s0: authenticated
[54557.619440] wlp58s0: associate with 6c:31:0e:b5:f4:af (try 1/3)
[54557.635555] wlp58s0: RX AssocResp from 6c:31:0e:b5:f4:af (capab=0x1101 status=0 aid=3)
[54557.638901] wlp58s0: associated
[54557.698372] wlp58s0: Limiting TX power to 13 dBm as advertised by 6c:31:0e:b5:f4:af
[55034.817761] wlp58s0: deauthenticating from 6c:31:0e:b5:f4:af by local choice (Reason: 3=DEAUTH_LEAVING)
[55041.218140] PM: suspend entry (deep)
[55041.245570] Filesystems sync: 0.027 seconds
[55041.248302] Freezing user space processes
[55041.250266] Freezing user space processes completed (elapsed 0.001 seconds)
[55041.250270] OOM killer disabled.
[55041.250271] Freezing remaining freezable tasks
[55041.251927] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[55041.251981] printk: Suspending console(s) (use no_console_suspend to debug)
[55041.848378] ACPI: EC: interrupt blocked
[55041.876314] ACPI: PM: Preparing to enter system sleep state S3
[55041.897072] ACPI: EC: event blocked
[55041.897077] ACPI: EC: EC stopped
[55041.897089] ACPI: PM: Saving platform NVS memory
[55041.900412] Disabling non-boot CPUs ...
[55041.902427] smpboot: CPU 3 is now offline
[55041.906818] smpboot: CPU 2 is now offline
[55041.910435] smpboot: CPU 1 is now offline
[55041.917803] ACPI: PM: Low-level resume complete
[55041.917848] ACPI: EC: EC started
[55041.917848] ACPI: PM: Restoring platform NVS memory
[55041.919746] Enabling non-boot CPUs ...
[55041.919772] smpboot: Booting Node 0 Processor 1 APIC 0x2
[55041.920486] CPU1 is up
[55041.920500] smpboot: Booting Node 0 Processor 2 APIC 0x1
[55041.921248] CPU2 is up
[55041.921265] smpboot: Booting Node 0 Processor 3 APIC 0x3
[55041.921970] CPU3 is up
[55041.924786] ACPI: PM: Waking up from system sleep state S3
[55041.951751] ACPI: EC: interrupt unblocked
[55041.986481] ACPI: EC: event unblocked
[55041.998265] nvme nvme0: 4/0/0 default/read/poll queues
[55042.225388] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[55042.237397] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[55042.390906] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[55042.493407] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[55042.749419] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[55042.954673] OOM killer enabled.
[55042.954677] Restarting tasks ... done.
[55042.956877] random: crng reseeded on system resumption
[55043.077332] PM: suspend exit
[55043.163151] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[55043.163167] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[55043.451036] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[55043.521605] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[55043.547182] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[55059.086837] wlp58s0: authenticate with 70:f0:96:8e:a3:2b (local address=9c:b6:d0:d1:6a:b1)
[55059.086843] wlp58s0: send auth to 70:f0:96:8e:a3:2b (try 1/3)
[55059.088398] wlp58s0: authenticated
[55059.089276] wlp58s0: associate with 70:f0:96:8e:a3:2b (try 1/3)
[55059.093067] wlp58s0: RX AssocResp from 70:f0:96:8e:a3:2b (capab=0x1111 status=0 aid=11)
[55059.095610] wlp58s0: associated
[55059.167489] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:f0:96:8e:a3:2b
[55184.847790] wlp58s0: deauthenticating from 70:f0:96:8e:a3:2b by local choice (Reason: 3=DEAUTH_LEAVING)
[55186.523426] PM: suspend entry (deep)
[55186.542201] Filesystems sync: 0.018 seconds
[55186.545054] Freezing user space processes
[55186.546985] Freezing user space processes completed (elapsed 0.001 seconds)
[55186.546988] OOM killer disabled.
[55186.546989] Freezing remaining freezable tasks
[55186.548611] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[55186.548671] printk: Suspending console(s) (use no_console_suspend to debug)
[55187.151669] ACPI: EC: interrupt blocked
[55187.178770] ACPI: PM: Preparing to enter system sleep state S3
[55187.188960] ACPI: EC: event blocked
[55187.188965] ACPI: EC: EC stopped
[55187.188967] ACPI: PM: Saving platform NVS memory
[55187.192274] Disabling non-boot CPUs ...
[55187.194301] smpboot: CPU 3 is now offline
[55187.198496] smpboot: CPU 2 is now offline
[55187.201466] smpboot: CPU 1 is now offline
[55187.210079] ACPI: PM: Low-level resume complete
[55187.210123] ACPI: EC: EC started
[55187.210123] ACPI: PM: Restoring platform NVS memory
[55187.212022] Enabling non-boot CPUs ...
[55187.212047] smpboot: Booting Node 0 Processor 1 APIC 0x2
[55187.212775] CPU1 is up
[55187.212793] smpboot: Booting Node 0 Processor 2 APIC 0x1
[55187.213609] CPU2 is up
[55187.213626] smpboot: Booting Node 0 Processor 3 APIC 0x3
[55187.214342] CPU3 is up
[55187.217177] ACPI: PM: Waking up from system sleep state S3
[55187.243941] ACPI: EC: interrupt unblocked
[55187.294855] ACPI: EC: event unblocked
[55187.308889] nvme nvme0: 4/0/0 default/read/poll queues
[55187.544932] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[55187.549009] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[55187.709999] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[55187.805000] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[55188.060943] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[55188.262997] OOM killer enabled.
[55188.263000] Restarting tasks ... done.
[55188.264672] random: crng reseeded on system resumption
[55188.414982] PM: suspend exit
[55188.471349] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[55188.471366] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[55188.743629] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[55188.830426] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[55188.854683] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[55194.408909] wlp58s0: authenticate with 54:8a:ba:27:d8:a3 (local address=9c:b6:d0:d1:6a:b1)
[55194.408916] wlp58s0: send auth to 54:8a:ba:27:d8:a3 (try 1/3)
[55194.410746] wlp58s0: authenticated
[55194.412933] wlp58s0: associate with 54:8a:ba:27:d8:a3 (try 1/3)
[55194.419867] wlp58s0: RX AssocResp from 54:8a:ba:27:d8:a3 (capab=0x1111 status=0 aid=13)
[55194.422341] wlp58s0: associated
[55194.460402] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 54:8a:ba:27:d8:a3
[57190.370266] wlp58s0: deauthenticating from 54:8a:ba:27:d8:a3 by local choice (Reason: 3=DEAUTH_LEAVING)
[57193.492145] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 54:8a:ba:27:d8:a3: -110
[57193.492170] wlp58s0: failed to remove key (0, 54:8a:ba:27:d8:a3) from hardware (-110)
[57194.140163] PM: suspend entry (deep)
[57194.164225] Filesystems sync: 0.024 seconds
[57194.167622] Freezing user space processes
[57194.169607] Freezing user space processes completed (elapsed 0.001 seconds)
[57194.169611] OOM killer disabled.
[57194.169613] Freezing remaining freezable tasks
[57194.171264] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[57194.171319] printk: Suspending console(s) (use no_console_suspend to debug)
[57194.786791] ACPI: EC: interrupt blocked
[57194.816134] ACPI: PM: Preparing to enter system sleep state S3
[57194.826288] ACPI: EC: event blocked
[57194.826292] ACPI: EC: EC stopped
[57194.826294] ACPI: PM: Saving platform NVS memory
[57194.829706] Disabling non-boot CPUs ...
[57194.831840] smpboot: CPU 3 is now offline
[57194.835262] smpboot: CPU 2 is now offline
[57194.842132] smpboot: CPU 1 is now offline
[57194.850141] ACPI: PM: Low-level resume complete
[57194.850184] ACPI: EC: EC started
[57194.850185] ACPI: PM: Restoring platform NVS memory
[57194.852082] Enabling non-boot CPUs ...
[57194.852114] smpboot: Booting Node 0 Processor 1 APIC 0x2
[57194.852832] CPU1 is up
[57194.852848] smpboot: Booting Node 0 Processor 2 APIC 0x1
[57194.853614] CPU2 is up
[57194.853631] smpboot: Booting Node 0 Processor 3 APIC 0x3
[57194.854335] CPU3 is up
[57194.857182] ACPI: PM: Waking up from system sleep state S3
[57194.887906] ACPI: EC: interrupt unblocked
[57194.904581] ACPI: EC: event unblocked
[57194.916799] nvme nvme0: 4/0/0 default/read/poll queues
[57195.140134] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[57195.156112] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[57195.303927] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[57195.412157] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[57195.668191] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[57195.807947] OOM killer enabled.
[57195.807951] Restarting tasks ... done.
[57195.810711] random: crng reseeded on system resumption
[57195.912814] PM: suspend exit
[57196.011596] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[57196.011611] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[57196.368799] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[57196.396064] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[57196.400857] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[57201.861558] wlp58s0: authenticate with 10:a8:29:70:82:4b (local address=9c:b6:d0:d1:6a:b1)
[57201.861570] wlp58s0: send auth to 10:a8:29:70:82:4b (try 1/3)
[57201.864591] wlp58s0: authenticated
[57201.868217] wlp58s0: associate with 10:a8:29:70:82:4b (try 1/3)
[57201.876499] wlp58s0: RX AssocResp from 10:a8:29:70:82:4b (capab=0x1111 status=0 aid=32)
[57201.879409] wlp58s0: associated
[57201.922978] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 10:a8:29:70:82:4b
[59066.567966] wlp58s0: disconnect from AP 10:a8:29:70:82:4b for new auth to 70:f0:96:8b:bb:e4
[59069.711467] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 10:a8:29:70:82:4b: -110
[59069.711478] wlp58s0: failed to remove key (0, 10:a8:29:70:82:4b) from hardware (-110)
[59069.752783] wlp58s0: authenticate with 70:f0:96:8b:bb:e4 (local address=9c:b6:d0:d1:6a:b1)
[59069.752799] wlp58s0: send auth to 70:f0:96:8b:bb:e4 (try 1/3)
[59069.757185] wlp58s0: authenticated
[59069.763300] wlp58s0: associate with 70:f0:96:8b:bb:e4 (try 1/3)
[59069.768320] wlp58s0: RX ReassocResp from 70:f0:96:8b:bb:e4 (capab=0x1111 status=0 aid=15)
[59069.772422] wlp58s0: associated
[59069.841770] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 70:f0:96:8b:bb:e4
[59102.767420] wlp58s0: disconnect from AP 70:f0:96:8b:bb:e4 for new auth to 10:a8:29:70:82:4b
[59102.851284] wlp58s0: authenticate with 10:a8:29:70:82:4b (local address=9c:b6:d0:d1:6a:b1)
[59102.851299] wlp58s0: send auth to 10:a8:29:70:82:4b (try 1/3)
[59102.856432] wlp58s0: authenticated
[59102.858823] wlp58s0: associate with 10:a8:29:70:82:4b (try 1/3)
[59102.866005] wlp58s0: RX ReassocResp from 10:a8:29:70:82:4b (capab=0x1111 status=0 aid=18)
[59102.869211] wlp58s0: associated
[59102.884845] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 10:a8:29:70:82:4b
[59127.531062] wlp58s0: disconnect from AP 10:a8:29:70:82:4b for new auth to 70:f0:96:8b:bb:e4
[59127.609385] wlp58s0: authenticate with 70:f0:96:8b:bb:e4 (local address=9c:b6:d0:d1:6a:b1)
[59127.609400] wlp58s0: send auth to 70:f0:96:8b:bb:e4 (try 1/3)
[59127.613242] wlp58s0: authenticated
[59127.618446] wlp58s0: associate with 70:f0:96:8b:bb:e4 (try 1/3)
[59127.622414] wlp58s0: RX ReassocResp from 70:f0:96:8b:bb:e4 (capab=0x1111 status=0 aid=31)
[59127.627460] wlp58s0: associated
[59127.699324] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 70:f0:96:8b:bb:e4
[59166.595208] wlp58s0: deauthenticating from 70:f0:96:8b:bb:e4 by local choice (Reason: 3=DEAUTH_LEAVING)
[59168.266519] PM: suspend entry (deep)
[59168.302346] Filesystems sync: 0.035 seconds
[59168.306813] Freezing user space processes
[59168.308716] Freezing user space processes completed (elapsed 0.001 seconds)
[59168.308720] OOM killer disabled.
[59168.308720] Freezing remaining freezable tasks
[59168.310229] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[59168.310280] printk: Suspending console(s) (use no_console_suspend to debug)
[59168.884946] ACPI: EC: interrupt blocked
[59168.914011] ACPI: PM: Preparing to enter system sleep state S3
[59168.924305] ACPI: EC: event blocked
[59168.924309] ACPI: EC: EC stopped
[59168.924311] ACPI: PM: Saving platform NVS memory
[59168.927738] Disabling non-boot CPUs ...
[59168.929880] smpboot: CPU 3 is now offline
[59168.934657] smpboot: CPU 2 is now offline
[59168.937483] smpboot: CPU 1 is now offline
[59168.944884] ACPI: PM: Low-level resume complete
[59168.944929] ACPI: EC: EC started
[59168.944929] ACPI: PM: Restoring platform NVS memory
[59168.946827] Enabling non-boot CPUs ...
[59168.946853] smpboot: Booting Node 0 Processor 1 APIC 0x2
[59168.947572] CPU1 is up
[59168.947587] smpboot: Booting Node 0 Processor 2 APIC 0x1
[59168.948355] CPU2 is up
[59168.948371] smpboot: Booting Node 0 Processor 3 APIC 0x3
[59168.949075] CPU3 is up
[59168.951909] ACPI: PM: Waking up from system sleep state S3
[59168.982519] ACPI: EC: interrupt unblocked
[59169.035816] ACPI: EC: event unblocked
[59169.049086] nvme nvme0: 4/0/0 default/read/poll queues
[59169.278149] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[59169.286126] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[59169.542136] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[59169.798190] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[59169.938166] OOM killer enabled.
[59169.938171] Restarting tasks ... done.
[59169.940367] random: crng reseeded on system resumption
[59170.065417] PM: suspend exit
[59170.141113] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[59170.141119] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[59170.475756] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[59170.501175] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[59170.523877] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[59175.673607] wlp58s0: authenticate with e4:37:9f:33:9d:8b (local address=9c:b6:d0:d1:6a:b1)
[59175.673616] wlp58s0: send auth to e4:37:9f:33:9d:8b (try 1/3)
[59175.675670] wlp58s0: authenticated
[59175.678016] wlp58s0: associate with e4:37:9f:33:9d:8b (try 1/3)
[59175.685828] wlp58s0: RX AssocResp from e4:37:9f:33:9d:8b (capab=0x1111 status=0 aid=18)
[59175.688678] wlp58s0: associated
[59175.707429] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e4:37:9f:33:9d:8b
[60160.978016] wlp58s0: deauthenticating from e4:37:9f:33:9d:8b by local choice (Reason: 3=DEAUTH_LEAVING)
[60164.109766] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer e4:37:9f:33:9d:8b: -110
[60164.109798] wlp58s0: failed to remove key (0, e4:37:9f:33:9d:8b) from hardware (-110)
[60164.709022] PM: suspend entry (deep)
[60164.717983] Filesystems sync: 0.008 seconds
[60164.720802] Freezing user space processes
[60164.722772] Freezing user space processes completed (elapsed 0.001 seconds)
[60164.722776] OOM killer disabled.
[60164.722777] Freezing remaining freezable tasks
[60164.724393] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[60164.724444] printk: Suspending console(s) (use no_console_suspend to debug)
[60165.356371] ACPI: EC: interrupt blocked
[60165.384435] ACPI: PM: Preparing to enter system sleep state S3
[60165.394513] ACPI: EC: event blocked
[60165.394518] ACPI: EC: EC stopped
[60165.394520] ACPI: PM: Saving platform NVS memory
[60165.397892] Disabling non-boot CPUs ...
[60165.401237] smpboot: CPU 3 is now offline
[60165.405292] smpboot: CPU 2 is now offline
[60165.409584] smpboot: CPU 1 is now offline
[60165.418593] ACPI: PM: Low-level resume complete
[60165.418637] ACPI: EC: EC started
[60165.418638] ACPI: PM: Restoring platform NVS memory
[60165.420543] Enabling non-boot CPUs ...
[60165.420567] smpboot: Booting Node 0 Processor 1 APIC 0x2
[60165.421288] CPU1 is up
[60165.421304] smpboot: Booting Node 0 Processor 2 APIC 0x1
[60165.422082] CPU2 is up
[60165.422098] smpboot: Booting Node 0 Processor 3 APIC 0x3
[60165.422808] CPU3 is up
[60165.425621] ACPI: PM: Waking up from system sleep state S3
[60165.456034] ACPI: EC: interrupt unblocked
[60165.473217] ACPI: EC: event unblocked
[60165.484239] nvme nvme0: 4/0/0 default/read/poll queues
[60165.705780] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[60165.725754] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[60165.876424] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[60165.981805] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[60166.237829] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[60166.381679] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[60166.381687] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[60166.382672] OOM killer enabled.
[60166.382676] Restarting tasks ... done.
[60166.387597] random: crng reseeded on system resumption
[60166.493316] PM: suspend exit
[60166.742010] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[60166.769083] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[60166.949000] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[60172.134821] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1)
[60172.134832] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3)
[60172.187999] wlp58s0: authenticated
[60172.189701] wlp58s0: associate with 08:7b:87:c8:d5:ab (try 1/3)
[60172.197746] wlp58s0: RX AssocResp from 08:7b:87:c8:d5:ab (capab=0x1111 status=0 aid=4)
[60172.200774] wlp58s0: associated
[60172.249568] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 08:7b:87:c8:d5:ab
[60291.853156] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=39 end=40) time 163 us, min 1788, max 1799, scanline start 1782, end 1800
[60469.256242] wlp58s0: disconnect from AP 08:7b:87:c8:d5:ab for new auth to 24:16:1b:ce:50:0b
[60469.353534] wlp58s0: authenticate with 24:16:1b:ce:50:0b (local address=9c:b6:d0:d1:6a:b1)
[60469.353556] wlp58s0: send auth to 24:16:1b:ce:50:0b (try 1/3)
[60469.357588] wlp58s0: authenticated
[60469.363645] wlp58s0: associate with 24:16:1b:ce:50:0b (try 1/3)
[60469.368577] wlp58s0: RX ReassocResp from 24:16:1b:ce:50:0b (capab=0x1111 status=0 aid=12)
[60469.371240] wlp58s0: associated
[60469.455855] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:16:1b:ce:50:0b
[60776.541915] wlp58s0: disconnect from AP 24:16:1b:ce:50:0b for new auth to 08:7b:87:c8:d5:ab
[60776.623273] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1)
[60776.623288] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3)
[60776.626811] wlp58s0: authenticated
[60776.669418] wlp58s0: associate with 08:7b:87:c8:d5:ab (try 1/3)
[60776.677282] wlp58s0: RX ReassocResp from 08:7b:87:c8:d5:ab (capab=0x1111 status=0 aid=20)
[60776.681892] wlp58s0: associated
[60776.717297] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 08:7b:87:c8:d5:ab
[60813.889550] wlp58s0: disconnect from AP 08:7b:87:c8:d5:ab for new auth to 24:16:1b:ce:50:0b
[60813.973791] wlp58s0: authenticate with 24:16:1b:ce:50:0b (local address=9c:b6:d0:d1:6a:b1)
[60813.973801] wlp58s0: send auth to 24:16:1b:ce:50:0b (try 1/3)
[60813.981543] wlp58s0: authenticated
[60813.985166] wlp58s0: associate with 24:16:1b:ce:50:0b (try 1/3)
[60813.990721] wlp58s0: RX ReassocResp from 24:16:1b:ce:50:0b (capab=0x1111 status=0 aid=9)
[60813.993257] wlp58s0: associated
[60814.030832] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:16:1b:ce:50:0b
[60833.209519] wlp58s0: disconnect from AP 24:16:1b:ce:50:0b for new auth to 08:7b:87:c8:d5:ab
[60833.284059] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1)
[60833.284076] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3)
[60833.291394] wlp58s0: authenticated
[60833.293156] wlp58s0: associate with 08:7b:87:c8:d5:ab (try 1/3)
[60833.305624] wlp58s0: RX ReassocResp from 08:7b:87:c8:d5:ab (capab=0x1111 status=0 aid=35)
[60833.308303] wlp58s0: associated
[60833.345114] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 08:7b:87:c8:d5:ab
[60882.269267] wlp58s0: disconnect from AP 08:7b:87:c8:d5:ab for new auth to a4:b4:39:52:44:cb
[60882.343002] wlp58s0: authenticate with a4:b4:39:52:44:cb (local address=9c:b6:d0:d1:6a:b1)
[60882.343018] wlp58s0: send auth to a4:b4:39:52:44:cb (try 1/3)
[60882.346713] wlp58s0: authenticated
[60882.348680] wlp58s0: associate with a4:b4:39:52:44:cb (try 1/3)
[60882.352775] wlp58s0: RX ReassocResp from a4:b4:39:52:44:cb (capab=0x1111 status=0 aid=7)
[60882.356270] wlp58s0: associated
[60882.452224] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by a4:b4:39:52:44:cb
[60891.617846] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA a4:b4:39:52:44:cb
[60894.756887] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA a4:b4:39:52:44:cb
[60896.272828] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[60896.281332] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[60897.885140] wlp58s0: authenticate with 08:ec:f5:e5:06:ab (local address=9c:b6:d0:d1:6a:b1)
[60897.885158] wlp58s0: send auth to 08:ec:f5:e5:06:ab (try 1/3)
[60897.886239] wlp58s0: send auth to 08:ec:f5:e5:06:ab (try 2/3)
[60897.887763] wlp58s0: send auth to 08:ec:f5:e5:06:ab (try 3/3)
[60897.888858] wlp58s0: authentication with 08:ec:f5:e5:06:ab timed out
[60900.014662] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1)
[60900.014682] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3)
[60900.016511] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 2/3)
[60900.017592] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 3/3)
[60900.018625] wlp58s0: authentication with 08:7b:87:c8:d5:ab timed out
[60901.942116] wlp58s0: authenticate with 08:7b:87:ca:f2:6b (local address=9c:b6:d0:d1:6a:b1)
[60901.942133] wlp58s0: send auth to 08:7b:87:ca:f2:6b (try 1/3)
[60901.960875] wlp58s0: authenticated
[60901.964507] wlp58s0: associate with 08:7b:87:ca:f2:6b (try 1/3)
[60901.972298] wlp58s0: RX AssocResp from 08:7b:87:ca:f2:6b (capab=0x1111 status=0 aid=41)
[60901.975411] wlp58s0: associated
[60902.040676] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 08:7b:87:ca:f2:6b
[62204.287953] wlp58s0: disconnect from AP 08:7b:87:ca:f2:6b for new auth to a4:b4:39:52:44:cb
[62204.368446] wlp58s0: authenticate with a4:b4:39:52:44:cb (local address=9c:b6:d0:d1:6a:b1)
[62204.368461] wlp58s0: send auth to a4:b4:39:52:44:cb (try 1/3)
[62204.371964] wlp58s0: authenticated
[62204.407239] wlp58s0: associate with a4:b4:39:52:44:cb (try 1/3)
[62204.411437] wlp58s0: RX ReassocResp from a4:b4:39:52:44:cb (capab=0x1111 status=0 aid=10)
[62204.416037] wlp58s0: associated
[62204.434242] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by a4:b4:39:52:44:cb
[62217.479386] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[62217.487813] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[62218.801757] wlp58s0: authenticate with 54:8a:ba:27:d1:43 (local address=9c:b6:d0:d1:6a:b1)
[62218.801778] wlp58s0: send auth to 54:8a:ba:27:d1:43 (try 1/3)
[62218.804073] wlp58s0: authenticated
[62218.815115] wlp58s0: associate with 54:8a:ba:27:d1:43 (try 1/3)
[62218.822367] wlp58s0: RX AssocResp from 54:8a:ba:27:d1:43 (capab=0x1111 status=0 aid=1)
[62218.826069] wlp58s0: associated
[62218.830429] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 54:8a:ba:27:d1:43
[62256.188143] wlp58s0: disconnect from AP 54:8a:ba:27:d1:43 for new auth to 54:8a:ba:27:d1:4b
[62256.271148] wlp58s0: authenticate with 54:8a:ba:27:d1:4b (local address=9c:b6:d0:d1:6a:b1)
[62256.271167] wlp58s0: send auth to 54:8a:ba:27:d1:4b (try 1/3)
[62256.275630] wlp58s0: authenticated
[62256.287620] wlp58s0: associate with 54:8a:ba:27:d1:4b (try 1/3)
[62256.294644] wlp58s0: RX ReassocResp from 54:8a:ba:27:d1:4b (capab=0x1111 status=0 aid=2)
[62256.298309] wlp58s0: associated
[62256.314098] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 54:8a:ba:27:d1:4b
[64094.245828] systemd-sysv-generator[572976]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[64094.245836] systemd-sysv-generator[572976]: Please update package to include a native systemd unit file.
[64094.245839] systemd-sysv-generator[572976]: ! This compatibility logic is deprecated, expect removal soon. !
[64094.695313] wlp58s0: deauthenticating from 54:8a:ba:27:d1:4b by local choice (Reason: 3=DEAUTH_LEAVING)
[64097.807380] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 54:8a:ba:27:d1:4b: -110
[64097.807407] wlp58s0: failed to remove key (0, 54:8a:ba:27:d1:4b) from hardware (-110)
[64113.559196] wlp58s0: authenticate with 54:8a:ba:27:d1:4b (local address=9c:b6:d0:d1:6a:b1)
[64113.559217] wlp58s0: send auth to 54:8a:ba:27:d1:4b (try 1/3)
[64113.562661] wlp58s0: authenticated
[64113.563362] wlp58s0: associate with 54:8a:ba:27:d1:4b (try 1/3)
[64113.569954] wlp58s0: RX AssocResp from 54:8a:ba:27:d1:4b (capab=0x1111 status=0 aid=2)
[64113.573611] wlp58s0: associated
[64113.632466] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 54:8a:ba:27:d1:4b
[64293.814114] wlp58s0: deauthenticating from 54:8a:ba:27:d1:4b by local choice (Reason: 3=DEAUTH_LEAVING)
[64295.471897] PM: suspend entry (deep)
[64295.487034] Filesystems sync: 0.015 seconds
[64295.491472] Freezing user space processes
[64295.493397] Freezing user space processes completed (elapsed 0.001 seconds)
[64295.493400] OOM killer disabled.
[64295.493401] Freezing remaining freezable tasks
[64295.495035] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[64295.495085] printk: Suspending console(s) (use no_console_suspend to debug)
[64296.098027] ACPI: EC: interrupt blocked
[64296.126050] ACPI: PM: Preparing to enter system sleep state S3
[64296.136221] ACPI: EC: event blocked
[64296.136226] ACPI: EC: EC stopped
[64296.136228] ACPI: PM: Saving platform NVS memory
[64296.139554] Disabling non-boot CPUs ...
[64296.141555] smpboot: CPU 3 is now offline
[64296.146634] smpboot: CPU 2 is now offline
[64296.151567] smpboot: CPU 1 is now offline
[64296.161519] ACPI: PM: Low-level resume complete
[64296.161563] ACPI: EC: EC started
[64296.161564] ACPI: PM: Restoring platform NVS memory
[64296.163462] Enabling non-boot CPUs ...
[64296.163489] smpboot: Booting Node 0 Processor 1 APIC 0x2
[64296.164207] CPU1 is up
[64296.164222] smpboot: Booting Node 0 Processor 2 APIC 0x1
[64296.164965] CPU2 is up
[64296.164982] smpboot: Booting Node 0 Processor 3 APIC 0x3
[64296.165692] CPU3 is up
[64296.168529] ACPI: PM: Waking up from system sleep state S3
[64296.199967] ACPI: EC: interrupt unblocked
[64296.216869] ACPI: EC: event unblocked
[64296.230077] nvme nvme0: 4/0/0 default/read/poll queues
[64296.459020] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[64296.471091] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[64296.626003] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[64296.731043] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[64296.987070] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[64297.131651] OOM killer enabled.
[64297.131656] Restarting tasks ... done.
[64297.134281] random: crng reseeded on system resumption
[64297.310324] PM: suspend exit
[64297.342615] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[64297.342629] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[64297.702668] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[64297.712851] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[64297.736677] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[64303.052365] wlp58s0: authenticate with 54:8a:ba:27:d8:a3 (local address=9c:b6:d0:d1:6a:b1)
[64303.052372] wlp58s0: send auth to 54:8a:ba:27:d8:a3 (try 1/3)
[64303.054374] wlp58s0: authenticated
[64303.054736] wlp58s0: associate with 54:8a:ba:27:d8:a3 (try 1/3)
[64303.078278] wlp58s0: RX AssocResp from 54:8a:ba:27:d8:a3 (capab=0x1111 status=0 aid=9)
[64303.080676] wlp58s0: associated
[64303.176969] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 54:8a:ba:27:d8:a3
[65824.270069] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info
[65830.414108] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info
[65836.302203] ath10k_pci 0000:3a:00.0: wmi command 90124 timeout, restarting hardware
[65836.302241] ath10k_pci 0000:3a:00.0: could not request peer stats info: -11
[65839.361148] ath10k_pci 0000:3a:00.0: failed to receive initialized event from target: 00000000
[65842.377010] ath10k_pci 0000:3a:00.0: failed to receive initialized event from target: 00000000
[65842.377019] ath10k_pci 0000:3a:00.0: failed to wait for target init: -110
[65842.381337] ieee80211 phy0: Hardware restart was requested
[65842.677982] ath10k_pci 0000:3a:00.0: device successfully recovered
[65864.238679] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=1571 end=1572) time 162 us, min 1788, max 1799, scanline start 1782, end 1800
[66308.573125] wlp58s0: deauthenticating from 54:8a:ba:27:d8:a3 by local choice (Reason: 3=DEAUTH_LEAVING)
[66315.489884] wlp58s0: authenticate with 54:8a:ba:27:d8:a3 (local address=9c:b6:d0:d1:6a:b1)
[66315.489892] wlp58s0: send auth to 54:8a:ba:27:d8:a3 (try 1/3)
[66315.493504] wlp58s0: authenticated
[66315.494141] wlp58s0: associate with 54:8a:ba:27:d8:a3 (try 1/3)
[66315.501313] wlp58s0: RX AssocResp from 54:8a:ba:27:d8:a3 (capab=0x1111 status=0 aid=9)
[66315.503808] wlp58s0: associated
[66315.541933] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 54:8a:ba:27:d8:a3
[66802.241834] wlp58s0: deauthenticating from 54:8a:ba:27:d8:a3 by local choice (Reason: 3=DEAUTH_LEAVING)
[66804.089309] PM: suspend entry (deep)
[66804.105886] Filesystems sync: 0.016 seconds
[66804.110401] Freezing user space processes
[66804.112533] Freezing user space processes completed (elapsed 0.002 seconds)
[66804.112538] OOM killer disabled.
[66804.112539] Freezing remaining freezable tasks
[66805.179217] Freezing remaining freezable tasks completed (elapsed 1.066 seconds)
[66805.179272] printk: Suspending console(s) (use no_console_suspend to debug)
[66805.757674] ACPI: EC: interrupt blocked
[66805.785058] ACPI: PM: Preparing to enter system sleep state S3
[66805.794233] ACPI: EC: event blocked
[66805.794237] ACPI: EC: EC stopped
[66805.794239] ACPI: PM: Saving platform NVS memory
[66805.797192] Disabling non-boot CPUs ...
[66805.800065] smpboot: CPU 3 is now offline
[66805.806525] smpboot: CPU 2 is now offline
[66805.809093] smpboot: CPU 1 is now offline
[66805.816770] ACPI: PM: Low-level resume complete
[66805.816813] ACPI: EC: EC started
[66805.816813] ACPI: PM: Restoring platform NVS memory
[66805.818709] Enabling non-boot CPUs ...
[66805.818736] smpboot: Booting Node 0 Processor 1 APIC 0x2
[66805.819454] CPU1 is up
[66805.819469] smpboot: Booting Node 0 Processor 2 APIC 0x1
[66805.820221] CPU2 is up
[66805.820238] smpboot: Booting Node 0 Processor 3 APIC 0x3
[66805.820944] CPU3 is up
[66805.823775] ACPI: PM: Waking up from system sleep state S3
[66805.854975] ACPI: EC: interrupt unblocked
[66805.875830] ACPI: EC: event unblocked
[66805.889395] nvme nvme0: 4/0/0 default/read/poll queues
[66806.118957] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[66806.130979] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[66806.285160] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[66806.386979] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[66806.642980] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[66806.845648] OOM killer enabled.
[66806.845653] Restarting tasks ... done.
[66806.850589] random: crng reseeded on system resumption
[66806.949045] PM: suspend exit
[66807.050996] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[66807.051011] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[66807.355887] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[66807.410711] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[66807.432776] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[66812.599757] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1)
[66812.599764] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3)
[66812.600710] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 2/3)
[66812.601950] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 3/3)
[66812.602907] wlp58s0: authentication with 08:7b:87:c8:d5:ab timed out
[66813.534790] wlp58s0: authenticate with 24:16:1b:ce:50:0b (local address=9c:b6:d0:d1:6a:b1)
[66813.534805] wlp58s0: send auth to 24:16:1b:ce:50:0b (try 1/3)
[66813.537463] wlp58s0: authenticated
[66813.551188] wlp58s0: associate with 24:16:1b:ce:50:0b (try 1/3)
[66813.556638] wlp58s0: RX AssocResp from 24:16:1b:ce:50:0b (capab=0x1111 status=0 aid=73)
[66813.560728] wlp58s0: associated
[66813.651817] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:16:1b:ce:50:0b
[66854.339708] wlp58s0: disconnect from AP 24:16:1b:ce:50:0b for new auth to 08:7b:87:c8:d5:ab
[66854.413520] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1)
[66854.413540] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3)
[66854.415656] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 2/3)
[66854.519190] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 3/3)
[66854.627173] wlp58s0: authentication with 08:7b:87:c8:d5:ab timed out
[66854.632383] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=51 end=52) time 482 us, min 1788, max 1799, scanline start 1758, end 1812
[66859.677078] wlp58s0: authenticate with 24:16:1b:ce:50:0b (local address=9c:b6:d0:d1:6a:b1)
[66859.677099] wlp58s0: send auth to 24:16:1b:ce:50:0b (try 1/3)
[66859.691521] wlp58s0: authenticated
[66859.695159] wlp58s0: associate with 24:16:1b:ce:50:0b (try 1/3)
[66859.699808] wlp58s0: RX AssocResp from 24:16:1b:ce:50:0b (capab=0x1111 status=0 aid=73)
[66859.702573] wlp58s0: associated
[66859.731963] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:16:1b:ce:50:0b
[66934.104079] wlp58s0: disconnect from AP 24:16:1b:ce:50:0b for new auth to 08:7b:87:c8:d5:ab
[66934.152521] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1)
[66934.152539] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3)
[66934.156001] wlp58s0: authenticated
[66934.159423] wlp58s0: associate with 08:7b:87:c8:d5:ab (try 1/3)
[66934.166757] wlp58s0: RX ReassocResp from 08:7b:87:c8:d5:ab (capab=0x1111 status=0 aid=28)
[66934.173566] wlp58s0: associated
[66934.179333] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 08:7b:87:c8:d5:ab
[67008.316223] wlp58s0: disconnect from AP 08:7b:87:c8:d5:ab for new auth to 24:16:1b:ce:50:0b
[67008.408975] wlp58s0: authenticate with 24:16:1b:ce:50:0b (local address=9c:b6:d0:d1:6a:b1)
[67008.408991] wlp58s0: send auth to 24:16:1b:ce:50:0b (try 1/3)
[67008.419875] wlp58s0: authenticated
[67008.423712] wlp58s0: associate with 24:16:1b:ce:50:0b (try 1/3)
[67008.429871] wlp58s0: RX ReassocResp from 24:16:1b:ce:50:0b (capab=0x1111 status=0 aid=19)
[67008.432509] wlp58s0: associated
[67008.518695] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:16:1b:ce:50:0b
[67111.439661] wlp58s0: disconnect from AP 24:16:1b:ce:50:0b for new auth to 08:7b:87:c8:d5:ab
[67111.518205] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1)
[67111.518228] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3)
[67111.519695] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 2/3)
[67111.521024] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 3/3)
[67111.524924] wlp58s0: authentication with 08:7b:87:c8:d5:ab timed out
[67112.383021] wlp58s0: authenticate with 24:16:1b:ce:50:0b (local address=9c:b6:d0:d1:6a:b1)
[67112.383038] wlp58s0: send auth to 24:16:1b:ce:50:0b (try 1/3)
[67112.394917] wlp58s0: authenticated
[67112.398934] wlp58s0: associate with 24:16:1b:ce:50:0b (try 1/3)
[67112.403692] wlp58s0: RX AssocResp from 24:16:1b:ce:50:0b (capab=0x1111 status=0 aid=19)
[67112.407421] wlp58s0: associated
[67112.454282] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:16:1b:ce:50:0b
[67149.895035] wlp58s0: disconnect from AP 24:16:1b:ce:50:0b for new auth to 08:7b:87:c8:d5:ab
[67149.961479] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1)
[67149.961499] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3)
[67149.968042] wlp58s0: authenticated
[67149.970540] wlp58s0: associate with 08:7b:87:c8:d5:ab (try 1/3)
[67149.989285] wlp58s0: RX ReassocResp from 08:7b:87:c8:d5:ab (capab=0x1111 status=0 aid=1)
[67149.993109] wlp58s0: associated
[67150.032932] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 08:7b:87:c8:d5:ab
[68495.785425] wlp58s0: deauthenticating from 08:7b:87:c8:d5:ab by local choice (Reason: 3=DEAUTH_LEAVING)
[68498.959378] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 08:7b:87:c8:d5:ab: -110
[68498.959402] wlp58s0: failed to remove key (0, 08:7b:87:c8:d5:ab) from hardware (-110)
[68499.507778] PM: suspend entry (deep)
[68499.530561] Filesystems sync: 0.022 seconds
[68499.540710] Freezing user space processes
[68499.543648] Freezing user space processes completed (elapsed 0.002 seconds)
[68499.543658] OOM killer disabled.
[68499.543661] Freezing remaining freezable tasks
[68499.545847] Freezing remaining freezable tasks completed (elapsed 0.002 seconds)
[68499.545967] printk: Suspending console(s) (use no_console_suspend to debug)
[68500.142098] ACPI: EC: interrupt blocked
[68500.170656] ACPI: PM: Preparing to enter system sleep state S3
[68500.181907] ACPI: EC: event blocked
[68500.181912] ACPI: EC: EC stopped
[68500.181913] ACPI: PM: Saving platform NVS memory
[68500.185247] Disabling non-boot CPUs ...
[68500.187296] smpboot: CPU 3 is now offline
[68500.191907] smpboot: CPU 2 is now offline
[68500.194462] smpboot: CPU 1 is now offline
[68500.201744] ACPI: PM: Low-level resume complete
[68500.201787] ACPI: EC: EC started
[68500.201788] ACPI: PM: Restoring platform NVS memory
[68500.203687] Enabling non-boot CPUs ...
[68500.203711] smpboot: Booting Node 0 Processor 1 APIC 0x2
[68500.204429] CPU1 is up
[68500.204444] smpboot: Booting Node 0 Processor 2 APIC 0x1
[68500.205211] CPU2 is up
[68500.205228] smpboot: Booting Node 0 Processor 3 APIC 0x3
[68500.205942] CPU3 is up
[68500.208782] ACPI: PM: Waking up from system sleep state S3
[68500.239195] ACPI: EC: interrupt unblocked
[68500.254795] ACPI: EC: event unblocked
[68500.271111] nvme nvme0: 4/0/0 default/read/poll queues
[68500.503422] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[68500.507436] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[68500.671985] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[68500.763418] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[68501.019489] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[68501.159237] OOM killer enabled.
[68501.159241] Restarting tasks ... done.
[68501.160511] random: crng reseeded on system resumption
[68501.272575] PM: suspend exit
[68501.363544] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[68501.363559] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[68501.722545] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[68501.727545] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[68501.745190] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[68507.086439] wlp58s0: authenticate with 08:7b:87:c8:d5:ab (local address=9c:b6:d0:d1:6a:b1)
[68507.086458] wlp58s0: send auth to 08:7b:87:c8:d5:ab (try 1/3)
[68507.099409] wlp58s0: authenticated
[68507.103407] wlp58s0: associate with 08:7b:87:c8:d5:ab (try 1/3)
[68507.112994] wlp58s0: RX AssocResp from 08:7b:87:c8:d5:ab (capab=0x1111 status=0 aid=1)
[68507.115958] wlp58s0: associated
[68507.204660] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 08:7b:87:c8:d5:ab
[70045.460810] wlp58s0: Connection to AP 08:7b:87:c8:d5:ab lost
[70050.573542] wlp58s0: authenticate with 70:f0:96:8b:bb:eb (local address=9c:b6:d0:d1:6a:b1)
[70050.573564] wlp58s0: send auth to 70:f0:96:8b:bb:eb (try 1/3)
[70050.575873] wlp58s0: authenticated
[70050.632940] wlp58s0: associate with 70:f0:96:8b:bb:eb (try 1/3)
[70050.637133] wlp58s0: RX AssocResp from 70:f0:96:8b:bb:eb (capab=0x1111 status=0 aid=17)
[70050.640276] wlp58s0: associated
[70050.655704] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:f0:96:8b:bb:eb
[71655.998010] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=10 end=11) time 179 us, min 1788, max 1799, scanline start 1780, end 1800
[78728.994825] wlp58s0: deauthenticating from 70:f0:96:8b:bb:eb by local choice (Reason: 3=DEAUTH_LEAVING)
[78732.228008] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 70:f0:96:8b:bb:eb: -110
[78732.228042] wlp58s0: failed to remove key (0, 70:f0:96:8b:bb:eb) from hardware (-110)
[78732.879345] PM: suspend entry (deep)
[78732.894108] Filesystems sync: 0.014 seconds
[78732.896724] Freezing user space processes
[78732.898641] Freezing user space processes completed (elapsed 0.001 seconds)
[78732.898644] OOM killer disabled.
[78732.898645] Freezing remaining freezable tasks
[78732.900217] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[78732.900265] printk: Suspending console(s) (use no_console_suspend to debug)
[78733.503139] ACPI: EC: interrupt blocked
[78733.530995] ACPI: PM: Preparing to enter system sleep state S3
[78733.541421] ACPI: EC: event blocked
[78733.541426] ACPI: EC: EC stopped
[78733.541428] ACPI: PM: Saving platform NVS memory
[78733.544795] Disabling non-boot CPUs ...
[78733.546894] smpboot: CPU 3 is now offline
[78733.550149] smpboot: CPU 2 is now offline
[78733.554781] smpboot: CPU 1 is now offline
[78733.561879] ACPI: PM: Low-level resume complete
[78733.561923] ACPI: EC: EC started
[78733.561923] ACPI: PM: Restoring platform NVS memory
[78733.563820] Enabling non-boot CPUs ...
[78733.563847] smpboot: Booting Node 0 Processor 1 APIC 0x2
[78733.564898] CPU1 is up
[78733.564916] smpboot: Booting Node 0 Processor 2 APIC 0x1
[78733.565669] CPU2 is up
[78733.565684] smpboot: Booting Node 0 Processor 3 APIC 0x3
[78733.566390] CPU3 is up
[78733.569238] ACPI: PM: Waking up from system sleep state S3
[78733.599480] ACPI: EC: interrupt unblocked
[78733.614664] ACPI: EC: event unblocked
[78733.627428] nvme nvme0: 4/0/0 default/read/poll queues
[78733.864071] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[78733.872089] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[78734.034665] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[78734.128065] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[78734.384097] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[78734.586272] OOM killer enabled.
[78734.586276] Restarting tasks ... done.
[78734.590690] random: crng reseeded on system resumption
[78734.714405] PM: suspend exit
[78734.795753] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[78734.795770] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[78735.089309] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[78735.155779] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[78735.177773] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[78740.770662] wlp58s0: authenticate with 68:71:61:0b:2e:0b (local address=9c:b6:d0:d1:6a:b1)
[78740.770669] wlp58s0: send auth to 68:71:61:0b:2e:0b (try 1/3)
[78740.772280] wlp58s0: authenticated
[78740.776011] wlp58s0: associate with 68:71:61:0b:2e:0b (try 1/3)
[78740.782694] wlp58s0: RX AssocResp from 68:71:61:0b:2e:0b (capab=0x1111 status=0 aid=66)
[78740.785264] wlp58s0: associated
[78740.881332] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 68:71:61:0b:2e:0b
[78824.232854] audit: type=1400 audit(1742664573.664:356): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/etc/paperspecs" pid=726706 comm="paperconf" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[78827.968722] audit: type=1400 audit(1742664577.400:357): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/profiles.ini" pid=726694 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272
[78827.981370] audit: type=1400 audit(1742664577.412:358): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/cert9.db" pid=726694 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=5272 ouid=5272
[78827.981446] audit: type=1400 audit(1742664577.412:359): apparmor="ALLOWED" operation="file_lock" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/cert9.db" pid=726694 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=5272 ouid=5272
[78827.982399] audit: type=1400 audit(1742664577.412:360): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/key4.db" pid=726694 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=5272 ouid=5272
[78827.982403] audit: type=1400 audit(1742664577.412:361): apparmor="ALLOWED" operation="file_lock" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.thunderbird/iglp44v6.default/key4.db" pid=726694 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=5272 ouid=5272
[78924.955125] wlp58s0: disconnect from AP 68:71:61:0b:2e:0b for new auth to b0:8b:cf:71:30:8c
[78928.074526] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 68:71:61:0b:2e:0b: -110
[78928.074555] wlp58s0: failed to remove key (0, 68:71:61:0b:2e:0b) from hardware (-110)
[78928.122540] wlp58s0: authenticate with b0:8b:cf:71:30:8c (local address=9c:b6:d0:d1:6a:b1)
[78928.122563] wlp58s0: send auth to b0:8b:cf:71:30:8c (try 1/3)
[78928.126456] wlp58s0: send auth to b0:8b:cf:71:30:8c (try 2/3)
[78928.128266] wlp58s0: send auth to b0:8b:cf:71:30:8c (try 3/3)
[78928.130088] wlp58s0: authentication with b0:8b:cf:71:30:8c timed out
[78928.953981] wlp58s0: authenticate with e4:aa:5d:16:ee:9f (local address=9c:b6:d0:d1:6a:b1)
[78928.954007] wlp58s0: send auth to e4:aa:5d:16:ee:9f (try 1/3)
[78928.955462] wlp58s0: send auth to e4:aa:5d:16:ee:9f (try 2/3)
[78928.957234] wlp58s0: send auth to e4:aa:5d:16:ee:9f (try 3/3)
[78928.958983] wlp58s0: authentication with e4:aa:5d:16:ee:9f timed out
[78929.704123] wlp58s0: authenticate with 68:71:61:0b:2e:0b (local address=9c:b6:d0:d1:6a:b1)
[78929.704144] wlp58s0: send auth to 68:71:61:0b:2e:0b (try 1/3)
[78929.705419] wlp58s0: send auth to 68:71:61:0b:2e:0b (try 2/3)
[78929.707202] wlp58s0: send auth to 68:71:61:0b:2e:0b (try 3/3)
[78929.708704] wlp58s0: authentication with 68:71:61:0b:2e:0b timed out
[78935.670938] wlp58s0: authenticate with 68:71:61:0b:2e:0b (local address=9c:b6:d0:d1:6a:b1)
[78935.670967] wlp58s0: send auth to 68:71:61:0b:2e:0b (try 1/3)
[78935.673517] wlp58s0: authenticated
[78935.682403] wlp58s0: associate with 68:71:61:0b:2e:0b (try 1/3)
[78935.686302] wlp58s0: RX AssocResp from 68:71:61:0b:2e:0b (capab=0x1111 status=0 aid=30)
[78935.691476] wlp58s0: associated
[78937.487650] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 68:71:61:0b:2e:0b
[78943.149817] wlp58s0: deauthenticating from 68:71:61:0b:2e:0b by local choice (Reason: 3=DEAUTH_LEAVING)
[78943.896035] wlp58s0: authenticate with e4:aa:5d:16:ee:9f (local address=9c:b6:d0:d1:6a:b1)
[78943.896052] wlp58s0: send auth to e4:aa:5d:16:ee:9f (try 1/3)
[78943.897151] wlp58s0: send auth to e4:aa:5d:16:ee:9f (try 2/3)
[78943.898379] wlp58s0: send auth to e4:aa:5d:16:ee:9f (try 3/3)
[78943.899579] wlp58s0: authentication with e4:aa:5d:16:ee:9f timed out
[78954.141327] wlp58s0: authenticate with 68:71:61:0b:2e:0b (local address=9c:b6:d0:d1:6a:b1)
[78954.141344] wlp58s0: send auth to 68:71:61:0b:2e:0b (try 1/3)
[78954.143530] wlp58s0: authenticated
[78954.146246] wlp58s0: associate with 68:71:61:0b:2e:0b (try 1/3)
[78954.151178] wlp58s0: RX AssocResp from 68:71:61:0b:2e:0b (capab=0x1111 status=0 aid=60)
[78954.156787] wlp58s0: associated
[78954.177857] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 68:71:61:0b:2e:0b
[78959.814765] wlp58s0: deauthenticating from 68:71:61:0b:2e:0b by local choice (Reason: 3=DEAUTH_LEAVING)
[78995.485489] wlp58s0: authenticate with f0:7f:06:3b:12:43 (local address=9c:b6:d0:d1:6a:b1)
[78995.485501] wlp58s0: send auth to f0:7f:06:3b:12:43 (try 1/3)
[78995.487054] wlp58s0: send auth to f0:7f:06:3b:12:43 (try 2/3)
[78995.488538] wlp58s0: send auth to f0:7f:06:3b:12:43 (try 3/3)
[78995.490050] wlp58s0: authentication with f0:7f:06:3b:12:43 timed out
[78995.945466] wlp58s0: authenticate with 08:ec:f5:e3:2a:ec (local address=9c:b6:d0:d1:6a:b1)
[78995.945486] wlp58s0: send auth to 08:ec:f5:e3:2a:ec (try 1/3)
[78995.946730] wlp58s0: send auth to 08:ec:f5:e3:2a:ec (try 2/3)
[78995.948547] wlp58s0: send auth to 08:ec:f5:e3:2a:ec (try 3/3)
[78995.949684] wlp58s0: authentication with 08:ec:f5:e3:2a:ec timed out
[78996.652232] wlp58s0: authenticate with f4:4e:05:43:c1:73 (local address=9c:b6:d0:d1:6a:b1)
[78996.652253] wlp58s0: send auth to f4:4e:05:43:c1:73 (try 1/3)
[78996.653869] wlp58s0: send auth to f4:4e:05:43:c1:73 (try 2/3)
[78996.655578] wlp58s0: send auth to f4:4e:05:43:c1:73 (try 3/3)
[78996.657170] wlp58s0: authentication with f4:4e:05:43:c1:73 timed out
[78997.809174] wlp58s0: authenticate with 08:7b:87:c8:ca:63 (local address=9c:b6:d0:d1:6a:b1)
[78997.809190] wlp58s0: send auth to 08:7b:87:c8:ca:63 (try 1/3)
[78997.811330] wlp58s0: send auth to 08:7b:87:c8:ca:63 (try 2/3)
[78997.812951] wlp58s0: send auth to 08:7b:87:c8:ca:63 (try 3/3)
[78997.814409] wlp58s0: authentication with 08:7b:87:c8:ca:63 timed out
[79449.663716] PM: suspend entry (deep)
[79449.674315] Filesystems sync: 0.010 seconds
[79449.677138] Freezing user space processes
[79449.678944] Freezing user space processes completed (elapsed 0.001 seconds)
[79449.678947] OOM killer disabled.
[79449.678948] Freezing remaining freezable tasks
[79449.680482] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[79449.680533] printk: Suspending console(s) (use no_console_suspend to debug)
[79450.268752] ACPI: EC: interrupt blocked
[79450.297054] ACPI: PM: Preparing to enter system sleep state S3
[79450.307145] ACPI: EC: event blocked
[79450.307149] ACPI: EC: EC stopped
[79450.307151] ACPI: PM: Saving platform NVS memory
[79450.310480] Disabling non-boot CPUs ...
[79450.312445] smpboot: CPU 3 is now offline
[79450.316594] smpboot: CPU 2 is now offline
[79450.320011] smpboot: CPU 1 is now offline
[79450.327828] ACPI: PM: Low-level resume complete
[79450.327869] ACPI: EC: EC started
[79450.327870] ACPI: PM: Restoring platform NVS memory
[79450.329767] Enabling non-boot CPUs ...
[79450.329792] smpboot: Booting Node 0 Processor 1 APIC 0x2
[79450.330530] CPU1 is up
[79450.330546] smpboot: Booting Node 0 Processor 2 APIC 0x1
[79450.331290] CPU2 is up
[79450.331307] smpboot: Booting Node 0 Processor 3 APIC 0x3
[79450.332001] CPU3 is up
[79450.334843] ACPI: PM: Waking up from system sleep state S3
[79450.365904] ACPI: EC: interrupt unblocked
[79450.382285] ACPI: EC: event unblocked
[79450.393830] nvme nvme0: 4/0/0 default/read/poll queues
[79450.618207] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[79450.634244] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[79450.784671] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[79450.898184] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[79451.154228] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[79451.357204] OOM killer enabled.
[79451.357209] Restarting tasks ... done.
[79451.361566] random: crng reseeded on system resumption
[79451.485673] PM: suspend exit
[79451.563887] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[79451.563893] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[79451.857107] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[79451.919953] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[79451.943847] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[79472.334302] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=49 end=50) time 166 us, min 1788, max 1799, scanline start 1781, end 1800
[79477.892077] wlp58s0: authenticate with cc:2d:e0:e7:3b:5b (local address=9c:b6:d0:d1:6a:b1)
[79477.892089] wlp58s0: send auth to cc:2d:e0:e7:3b:5b (try 1/3)
[79477.896847] wlp58s0: authenticated
[79477.901971] wlp58s0: associate with cc:2d:e0:e7:3b:5b (try 1/3)
[79477.910266] wlp58s0: RX AssocResp from cc:2d:e0:e7:3b:5b (capab=0x401 status=0 aid=1)
[79477.913294] wlp58s0: associated
[80032.475684] wlp58s0: deauthenticating from cc:2d:e0:e7:3b:5b by local choice (Reason: 3=DEAUTH_LEAVING)
[80034.183726] PM: suspend entry (deep)
[80034.193374] Filesystems sync: 0.009 seconds
[80034.197835] Freezing user space processes
[80034.199795] Freezing user space processes completed (elapsed 0.001 seconds)
[80034.199799] OOM killer disabled.
[80034.199800] Freezing remaining freezable tasks
[80034.201417] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[80034.201467] printk: Suspending console(s) (use no_console_suspend to debug)
[80034.812382] ACPI: EC: interrupt blocked
[80034.840785] ACPI: PM: Preparing to enter system sleep state S3
[80034.854706] ACPI: EC: event blocked
[80034.854711] ACPI: EC: EC stopped
[80034.854713] ACPI: PM: Saving platform NVS memory
[80034.858220] Disabling non-boot CPUs ...
[80034.860344] smpboot: CPU 3 is now offline
[80034.866500] smpboot: CPU 2 is now offline
[80034.869730] smpboot: CPU 1 is now offline
[80034.874979] ACPI: PM: Low-level resume complete
[80034.875024] ACPI: EC: EC started
[80034.875025] ACPI: PM: Restoring platform NVS memory
[80034.876943] Enabling non-boot CPUs ...
[80034.876968] smpboot: Booting Node 0 Processor 1 APIC 0x2
[80034.877687] CPU1 is up
[80034.877703] smpboot: Booting Node 0 Processor 2 APIC 0x1
[80034.878447] CPU2 is up
[80034.878463] smpboot: Booting Node 0 Processor 3 APIC 0x3
[80034.879173] CPU3 is up
[80034.882022] ACPI: PM: Waking up from system sleep state S3
[80034.916027] ACPI: EC: interrupt unblocked
[80034.957211] ACPI: EC: event unblocked
[80034.970844] nvme nvme0: 4/0/0 default/read/poll queues
[80035.207493] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[80035.215432] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[80035.463495] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[80035.719500] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[80035.922179] OOM killer enabled.
[80035.922183] Restarting tasks ... done.
[80035.923639] random: crng reseeded on system resumption
[80036.048922] PM: suspend exit
[80036.125954] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[80036.125966] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[80036.406674] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[80036.482321] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[80036.505146] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[80051.463491] wlp58s0: authenticate with 24:5a:4c:82:c8:2b (local address=9c:b6:d0:d1:6a:b1)
[80051.463512] wlp58s0: send auth to 24:5a:4c:82:c8:2b (try 1/3)
[80051.466560] wlp58s0: authenticated
[80051.467374] wlp58s0: associate with 24:5a:4c:82:c8:2b (try 1/3)
[80051.473409] wlp58s0: RX AssocResp from 24:5a:4c:82:c8:2b (capab=0x1101 status=0 aid=5)
[80051.476280] wlp58s0: associated
[80553.236495] wlp58s0: deauthenticating from 24:5a:4c:82:c8:2b by local choice (Reason: 3=DEAUTH_LEAVING)
[80554.991043] PM: suspend entry (deep)
[80555.011467] Filesystems sync: 0.020 seconds
[80555.014355] Freezing user space processes
[80555.016157] Freezing user space processes completed (elapsed 0.001 seconds)
[80555.016161] OOM killer disabled.
[80555.016162] Freezing remaining freezable tasks
[80555.017702] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[80555.017753] printk: Suspending console(s) (use no_console_suspend to debug)
[80555.609423] ACPI: EC: interrupt blocked
[80555.638486] ACPI: PM: Preparing to enter system sleep state S3
[80555.648617] ACPI: EC: event blocked
[80555.648622] ACPI: EC: EC stopped
[80555.648624] ACPI: PM: Saving platform NVS memory
[80555.651913] Disabling non-boot CPUs ...
[80555.655287] smpboot: CPU 3 is now offline
[80555.661102] smpboot: CPU 2 is now offline
[80555.663969] smpboot: CPU 1 is now offline
[80555.671122] ACPI: PM: Low-level resume complete
[80555.671165] ACPI: EC: EC started
[80555.671166] ACPI: PM: Restoring platform NVS memory
[80555.673064] Enabling non-boot CPUs ...
[80555.673088] smpboot: Booting Node 0 Processor 1 APIC 0x2
[80555.673807] CPU1 is up
[80555.673823] smpboot: Booting Node 0 Processor 2 APIC 0x1
[80555.674588] CPU2 is up
[80555.674605] smpboot: Booting Node 0 Processor 3 APIC 0x3
[80555.675322] CPU3 is up
[80555.678136] ACPI: PM: Waking up from system sleep state S3
[80555.711190] ACPI: EC: interrupt unblocked
[80555.749095] ACPI: EC: event unblocked
[80555.762774] nvme nvme0: 4/0/0 default/read/poll queues
[80555.991180] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[80555.999232] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[80556.161814] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[80556.255219] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[80556.511202] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[80556.713361] OOM killer enabled.
[80556.713365] Restarting tasks ... done.
[80556.715322] random: crng reseeded on system resumption
[80556.867452] PM: suspend exit
[80556.916906] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[80556.916912] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[80557.277396] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[80557.278805] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[80557.300881] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[81194.287588] PM: suspend entry (deep)
[81194.317102] Filesystems sync: 0.029 seconds
[81194.325738] Freezing user space processes
[81194.328246] Freezing user space processes completed (elapsed 0.002 seconds)
[81194.328255] OOM killer disabled.
[81194.328258] Freezing remaining freezable tasks
[81194.330152] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[81194.330272] printk: Suspending console(s) (use no_console_suspend to debug)
[81194.936538] ACPI: EC: interrupt blocked
[81194.964765] ACPI: PM: Preparing to enter system sleep state S3
[81194.974055] ACPI: EC: event blocked
[81194.974060] ACPI: EC: EC stopped
[81194.974061] ACPI: PM: Saving platform NVS memory
[81194.977019] Disabling non-boot CPUs ...
[81194.979878] smpboot: CPU 3 is now offline
[81194.983486] smpboot: CPU 2 is now offline
[81194.986086] smpboot: CPU 1 is now offline
[81194.995995] ACPI: PM: Low-level resume complete
[81194.996040] ACPI: EC: EC started
[81194.996041] ACPI: PM: Restoring platform NVS memory
[81194.997954] Enabling non-boot CPUs ...
[81194.997981] smpboot: Booting Node 0 Processor 1 APIC 0x2
[81194.998695] CPU1 is up
[81194.998711] smpboot: Booting Node 0 Processor 2 APIC 0x1
[81194.999483] CPU2 is up
[81194.999499] smpboot: Booting Node 0 Processor 3 APIC 0x3
[81195.000214] CPU3 is up
[81195.003048] ACPI: PM: Waking up from system sleep state S3
[81195.039285] ACPI: EC: interrupt unblocked
[81195.111479] ACPI: EC: event unblocked
[81195.123468] nvme nvme0: 4/0/0 default/read/poll queues
[81195.361905] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[81195.365886] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[81195.529468] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[81195.617901] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[81195.873865] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[81196.017593] OOM killer enabled.
[81196.017596] Restarting tasks ... done.
[81196.019018] random: crng reseeded on system resumption
[81196.132935] PM: suspend exit
[81196.219501] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[81196.219507] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[81196.528742] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[81196.576036] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[81196.603569] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[81212.167267] audit: type=1400 audit(1742670568.164:362): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.crossover.conf" pid=726694 comm="pool-6" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272
[81212.167731] audit: type=1400 audit(1742670568.164:363): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.gdbinit" pid=726694 comm="pool-6" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272
[81212.168031] audit: type=1400 audit(1742670568.164:364): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.pciids-cache" pid=726694 comm="pool-6" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272
[81212.169090] audit: type=1400 audit(1742670568.164:365): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.crossover.conf" pid=726694 comm="pool-3" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272
[81212.169951] audit: type=1400 audit(1742670568.168:366): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.gdbinit" pid=726694 comm="pool-3" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272
[81212.170144] audit: type=1400 audit(1742670568.168:367): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/.pciids-cache" pid=726694 comm="pool-3" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272
[81212.171247] audit: type=1400 audit(1742670568.168:368): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/20181231-105503--initcall.dmesg" pid=726694 comm="pool-6" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272
[81212.171253] audit: type=1400 audit(1742670568.168:369): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/20181231-105503--initcall.dmesg" pid=726694 comm="pool-3" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272
[81212.174402] audit: type=1400 audit(1742670568.172:370): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/BIOS_8F9DN_LN_1.15.0.BIN" pid=726694 comm="pool-6" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272
[81212.174409] audit: type=1400 audit(1742670568.172:371): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/pmenzel/BIOS_8F9DN_LN_1.15.0.BIN" pid=726694 comm="pool-3" requested_mask="r" denied_mask="r" fsuid=5272 ouid=5272
[81230.177657] wlp58s0: authenticate with 28:b3:71:10:33:2c (local address=9c:b6:d0:d1:6a:b1)
[81230.177664] wlp58s0: send auth to 28:b3:71:10:33:2c (try 1/3)
[81230.181191] wlp58s0: authenticated
[81230.181591] wlp58s0: associate with 28:b3:71:10:33:2c (try 1/3)
[81230.184307] wlp58s0: RX AssocResp from 28:b3:71:10:33:2c (capab=0x1001 status=0 aid=1)
[81230.186951] wlp58s0: associated
[81230.202977] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:b3:71:10:33:2c
[81942.880499] wlp58s0: deauthenticating from 28:b3:71:10:33:2c by local choice (Reason: 3=DEAUTH_LEAVING)
[81944.332606] PM: suspend entry (deep)
[81944.342887] Filesystems sync: 0.010 seconds
[81944.347572] Freezing user space processes
[81944.349569] Freezing user space processes completed (elapsed 0.001 seconds)
[81944.349574] OOM killer disabled.
[81944.349576] Freezing remaining freezable tasks
[81944.692485] Freezing remaining freezable tasks completed (elapsed 0.342 seconds)
[81944.692540] printk: Suspending console(s) (use no_console_suspend to debug)
[81945.269642] ACPI: EC: interrupt blocked
[81945.300200] ACPI: PM: Preparing to enter system sleep state S3
[81945.311364] ACPI: EC: event blocked
[81945.311369] ACPI: EC: EC stopped
[81945.311371] ACPI: PM: Saving platform NVS memory
[81945.314708] Disabling non-boot CPUs ...
[81945.316909] smpboot: CPU 3 is now offline
[81945.320330] smpboot: CPU 2 is now offline
[81945.324173] smpboot: CPU 1 is now offline
[81945.333266] ACPI: PM: Low-level resume complete
[81945.333312] ACPI: EC: EC started
[81945.333312] ACPI: PM: Restoring platform NVS memory
[81945.335219] Enabling non-boot CPUs ...
[81945.335243] smpboot: Booting Node 0 Processor 1 APIC 0x2
[81945.335967] CPU1 is up
[81945.335983] smpboot: Booting Node 0 Processor 2 APIC 0x1
[81945.336752] CPU2 is up
[81945.336769] smpboot: Booting Node 0 Processor 3 APIC 0x3
[81945.337480] CPU3 is up
[81945.340328] ACPI: PM: Waking up from system sleep state S3
[81945.369101] ACPI: EC: interrupt unblocked
[81945.425146] ACPI: EC: event unblocked
[81945.439527] nvme nvme0: 4/0/0 default/read/poll queues
[81945.678991] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[81945.679002] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[81945.934992] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[81946.191038] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[81946.330390] OOM killer enabled.
[81946.330394] Restarting tasks ... done.
[81946.334113] random: crng reseeded on system resumption
[81946.446921] PM: suspend exit
[81946.535694] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[81946.535707] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[81946.865992] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[81946.892318] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[81946.916665] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[82548.093072] wlp58s0: authenticate with d2:21:f9:91:80:84 (local address=9c:b6:d0:d1:6a:b1)
[82548.093080] wlp58s0: send auth to d2:21:f9:91:80:84 (try 1/3)
[82548.095606] wlp58s0: authenticated
[82548.101629] wlp58s0: associate with d2:21:f9:91:80:84 (try 1/3)
[82548.105596] wlp58s0: RX AssocResp from d2:21:f9:91:80:84 (capab=0x1111 status=0 aid=1)
[82548.108437] wlp58s0: associated
[82548.130121] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by d2:21:f9:91:80:84
[82566.869479] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[82566.877771] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[82567.608587] wlp58s0: authenticate with 7a:45:58:9f:76:88 (local address=9c:b6:d0:d1:6a:b1)
[82567.608595] wlp58s0: send auth to 7a:45:58:9f:76:88 (try 1/3)
[82567.610984] wlp58s0: authenticated
[82567.613418] wlp58s0: associate with 7a:45:58:9f:76:88 (try 1/3)
[82567.616640] wlp58s0: RX AssocResp from 7a:45:58:9f:76:88 (capab=0x1111 status=0 aid=2)
[82567.619290] wlp58s0: associated
[82590.929459] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[82590.936873] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[82591.654861] wlp58s0: authenticate with 7a:45:58:9f:76:88 (local address=9c:b6:d0:d1:6a:b1)
[82591.654888] wlp58s0: send auth to 7a:45:58:9f:76:88 (try 1/3)
[82591.656371] wlp58s0: send auth to 7a:45:58:9f:76:88 (try 2/3)
[82591.658544] wlp58s0: send auth to 7a:45:58:9f:76:88 (try 3/3)
[82591.659889] wlp58s0: authentication with 7a:45:58:9f:76:88 timed out
[82611.444631] wlp58s0: authenticate with 2e:91:ab:ed:77:71 (local address=9c:b6:d0:d1:6a:b1)
[82611.444651] wlp58s0: send auth to 2e:91:ab:ed:77:71 (try 1/3)
[82611.450072] wlp58s0: send auth to 2e:91:ab:ed:77:71 (try 2/3)
[82611.454855] wlp58s0: send auth to 2e:91:ab:ed:77:71 (try 3/3)
[82611.459763] wlp58s0: authentication with 2e:91:ab:ed:77:71 timed out
[82612.701481] wlp58s0: authenticate with 2e:91:ab:ed:77:72 (local address=9c:b6:d0:d1:6a:b1)
[82612.701497] wlp58s0: send auth to 2e:91:ab:ed:77:72 (try 1/3)
[82612.702877] wlp58s0: send auth to 2e:91:ab:ed:77:72 (try 2/3)
[82612.704297] wlp58s0: send auth to 2e:91:ab:ed:77:72 (try 3/3)
[82612.705966] wlp58s0: authentication with 2e:91:ab:ed:77:72 timed out
[82998.429769] PM: suspend entry (deep)
[82998.449956] Filesystems sync: 0.020 seconds
[82998.452789] Freezing user space processes
[82998.454583] Freezing user space processes completed (elapsed 0.001 seconds)
[82998.454587] OOM killer disabled.
[82998.454587] Freezing remaining freezable tasks
[82998.456139] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[82998.456191] printk: Suspending console(s) (use no_console_suspend to debug)
[82999.064304] ACPI: EC: interrupt blocked
[82999.092734] ACPI: PM: Preparing to enter system sleep state S3
[82999.101920] ACPI: EC: event blocked
[82999.101924] ACPI: EC: EC stopped
[82999.101925] ACPI: PM: Saving platform NVS memory
[82999.105077] Disabling non-boot CPUs ...
[82999.108164] smpboot: CPU 3 is now offline
[82999.112135] smpboot: CPU 2 is now offline
[82999.115258] smpboot: CPU 1 is now offline
[82999.122852] ACPI: PM: Low-level resume complete
[82999.122897] ACPI: EC: EC started
[82999.122898] ACPI: PM: Restoring platform NVS memory
[82999.124823] Enabling non-boot CPUs ...
[82999.124849] smpboot: Booting Node 0 Processor 1 APIC 0x2
[82999.125561] CPU1 is up
[82999.125577] smpboot: Booting Node 0 Processor 2 APIC 0x1
[82999.126331] CPU2 is up
[82999.126349] smpboot: Booting Node 0 Processor 3 APIC 0x3
[82999.127048] CPU3 is up
[82999.129898] ACPI: PM: Waking up from system sleep state S3
[82999.160622] ACPI: EC: interrupt unblocked
[82999.198119] ACPI: EC: event unblocked
[82999.210934] nvme nvme0: 4/0/0 default/read/poll queues
[82999.435837] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[82999.447802] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[82999.601177] atkbd_receive_byte: 210 callbacks suppressed
[82999.601183] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[82999.703804] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[82999.959865] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[83000.103227] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[83000.103232] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[83000.104056] OOM killer enabled.
[83000.104059] Restarting tasks ... done.
[83000.107857] random: crng reseeded on system resumption
[83000.228820] PM: suspend exit
[83000.461164] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[83000.485689] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[83000.658984] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[83022.448732] wlp58s0: authenticate with 00:f6:63:34:4a:3b (local address=9c:b6:d0:d1:6a:b1)
[83022.448741] wlp58s0: send auth to 00:f6:63:34:4a:3b (try 1/3)
[83022.449703] wlp58s0: authenticated
[83022.451595] wlp58s0: associate with 00:f6:63:34:4a:3b (try 1/3)
[83022.455529] wlp58s0: RX AssocResp from 00:f6:63:34:4a:3b (capab=0x1111 status=0 aid=11)
[83022.458230] wlp58s0: associated
[83022.508384] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:f6:63:34:4a:3b
[83346.543974] wlp58s0: deauthenticating from 00:f6:63:34:4a:3b by local choice (Reason: 3=DEAUTH_LEAVING)
[83348.183964] PM: suspend entry (deep)
[83348.196134] Filesystems sync: 0.012 seconds
[83348.206718] Freezing user space processes
[83348.209361] Freezing user space processes completed (elapsed 0.002 seconds)
[83348.209376] OOM killer disabled.
[83348.209380] Freezing remaining freezable tasks
[83348.211516] Freezing remaining freezable tasks completed (elapsed 0.002 seconds)
[83348.211649] printk: Suspending console(s) (use no_console_suspend to debug)
[83348.817093] ACPI: EC: interrupt blocked
[83348.845391] ACPI: PM: Preparing to enter system sleep state S3
[83348.857735] ACPI: EC: event blocked
[83348.857741] ACPI: EC: EC stopped
[83348.857743] ACPI: PM: Saving platform NVS memory
[83348.861285] Disabling non-boot CPUs ...
[83348.863456] smpboot: CPU 3 is now offline
[83348.870360] smpboot: CPU 2 is now offline
[83348.881357] smpboot: CPU 1 is now offline
[83348.888692] ACPI: PM: Low-level resume complete
[83348.888735] ACPI: EC: EC started
[83348.888735] ACPI: PM: Restoring platform NVS memory
[83348.890635] Enabling non-boot CPUs ...
[83348.890661] smpboot: Booting Node 0 Processor 1 APIC 0x2
[83348.891377] CPU1 is up
[83348.891392] smpboot: Booting Node 0 Processor 2 APIC 0x1
[83348.892134] CPU2 is up
[83348.892151] smpboot: Booting Node 0 Processor 3 APIC 0x3
[83348.892859] CPU3 is up
[83348.895704] ACPI: PM: Waking up from system sleep state S3
[83348.927945] ACPI: EC: interrupt unblocked
[83348.942518] ACPI: EC: event unblocked
[83348.955384] nvme nvme0: 4/0/0 default/read/poll queues
[83349.188992] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[83349.193020] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[83349.353366] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[83349.448959] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[83349.704943] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[83349.907141] OOM killer enabled.
[83349.907144] Restarting tasks ... done.
[83349.908245] random: crng reseeded on system resumption
[83349.995852] PM: suspend exit
[83350.112131] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[83350.112143] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[83350.416182] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[83350.472978] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[83350.498668] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[83379.652667] PM: suspend entry (deep)
[83379.667287] Filesystems sync: 0.014 seconds
[83379.676376] Freezing user space processes
[83379.679254] Freezing user space processes completed (elapsed 0.002 seconds)
[83379.679265] OOM killer disabled.
[83379.679268] Freezing remaining freezable tasks
[83379.681211] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[83379.681330] printk: Suspending console(s) (use no_console_suspend to debug)
[83380.279695] ACPI: EC: interrupt blocked
[83380.306853] ACPI: PM: Preparing to enter system sleep state S3
[83380.317051] ACPI: EC: event blocked
[83380.317056] ACPI: EC: EC stopped
[83380.317058] ACPI: PM: Saving platform NVS memory
[83380.320321] Disabling non-boot CPUs ...
[83380.322347] smpboot: CPU 3 is now offline
[83380.325825] smpboot: CPU 2 is now offline
[83380.329359] smpboot: CPU 1 is now offline
[83380.336085] ACPI: PM: Low-level resume complete
[83380.336129] ACPI: EC: EC started
[83380.336130] ACPI: PM: Restoring platform NVS memory
[83380.338053] Enabling non-boot CPUs ...
[83380.338080] smpboot: Booting Node 0 Processor 1 APIC 0x2
[83380.338810] CPU1 is up
[83380.338826] smpboot: Booting Node 0 Processor 2 APIC 0x1
[83380.339613] CPU2 is up
[83380.339630] smpboot: Booting Node 0 Processor 3 APIC 0x3
[83380.340342] CPU3 is up
[83380.343174] ACPI: PM: Waking up from system sleep state S3
[83380.372600] ACPI: EC: interrupt unblocked
[83380.388633] ACPI: EC: event unblocked
[83380.401518] nvme nvme0: 4/0/0 default/read/poll queues
[83380.618972] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[83380.638950] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[83380.789765] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[83380.894960] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[83381.151027] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[83381.295168] OOM killer enabled.
[83381.295174] Restarting tasks ... done.
[83381.297359] random: crng reseeded on system resumption
[83381.400449] PM: suspend exit
[83381.502159] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[83381.502177] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[83381.861428] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[83381.876644] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[83381.884715] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[83387.054303] wlp58s0: authenticate with 28:b3:71:10:33:2c (local address=9c:b6:d0:d1:6a:b1)
[83387.054309] wlp58s0: send auth to 28:b3:71:10:33:2c (try 1/3)
[83387.055440] wlp58s0: authenticated
[83387.058915] wlp58s0: associate with 28:b3:71:10:33:2c (try 1/3)
[83387.060645] wlp58s0: RX AssocResp from 28:b3:71:10:33:2c (capab=0x1001 status=0 aid=1)
[83387.063203] wlp58s0: associated
[83387.155992] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:b3:71:10:33:2c
[102594.501880] wlp58s0: deauthenticating from 28:b3:71:10:33:2c by local choice (Reason: 3=DEAUTH_LEAVING)
[102596.122156] PM: suspend entry (deep)
[102596.136690] Filesystems sync: 0.014 seconds
[102596.142919] Freezing user space processes
[102596.144902] Freezing user space processes completed (elapsed 0.001 seconds)
[102596.144907] OOM killer disabled.
[102596.144909] Freezing remaining freezable tasks
[102596.146602] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[102596.146716] printk: Suspending console(s) (use no_console_suspend to debug)
[102596.745399] ACPI: EC: interrupt blocked
[102596.772604] ACPI: PM: Preparing to enter system sleep state S3
[102596.782736] ACPI: EC: event blocked
[102596.782740] ACPI: EC: EC stopped
[102596.782742] ACPI: PM: Saving platform NVS memory
[102596.785982] Disabling non-boot CPUs ...
[102596.788110] smpboot: CPU 3 is now offline
[102596.792361] smpboot: CPU 2 is now offline
[102596.796230] smpboot: CPU 1 is now offline
[102596.803382] ACPI: PM: Low-level resume complete
[102596.803425] ACPI: EC: EC started
[102596.803426] ACPI: PM: Restoring platform NVS memory
[102596.805327] Enabling non-boot CPUs ...
[102596.805354] smpboot: Booting Node 0 Processor 1 APIC 0x2
[102596.806096] CPU1 is up
[102596.806113] smpboot: Booting Node 0 Processor 2 APIC 0x1
[102596.806884] CPU2 is up
[102596.806901] smpboot: Booting Node 0 Processor 3 APIC 0x3
[102596.807649] CPU3 is up
[102596.810481] ACPI: PM: Waking up from system sleep state S3
[102596.852661] ACPI: EC: interrupt unblocked
[102596.912189] ACPI: EC: event unblocked
[102596.925999] nvme nvme0: 4/0/0 default/read/poll queues
[102597.174459] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[102597.210431] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[102597.466468] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[102597.722518] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[102597.862382] OOM killer enabled.
[102597.862386] Restarting tasks ... done.
[102597.863899] random: crng reseeded on system resumption
[102597.906103] PM: suspend exit
[102598.067789] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[102598.331167] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[102603.541484] wlp58s0: authenticate with 28:b3:71:10:33:2c (local address=9c:b6:d0:d1:6a:b1)
[102603.541491] wlp58s0: send auth to 28:b3:71:10:33:2c (try 1/3)
[102603.542500] wlp58s0: authenticated
[102603.546409] wlp58s0: associate with 28:b3:71:10:33:2c (try 1/3)
[102603.548101] wlp58s0: RX AssocResp from 28:b3:71:10:33:2c (capab=0x1001 status=0 aid=1)
[102603.550432] wlp58s0: associated
[102603.575423] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:b3:71:10:33:2c
[103334.008449] wlp58s0: deauthenticating from 28:b3:71:10:33:2c by local choice (Reason: 3=DEAUTH_LEAVING)
[103335.774104] PM: suspend entry (deep)
[103335.792352] Filesystems sync: 0.018 seconds
[103335.795147] Freezing user space processes
[103335.796951] Freezing user space processes completed (elapsed 0.001 seconds)
[103335.796955] OOM killer disabled.
[103335.796956] Freezing remaining freezable tasks
[103335.798553] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[103335.798604] printk: Suspending console(s) (use no_console_suspend to debug)
[103336.395984] ACPI: EC: interrupt blocked
[103336.424493] ACPI: PM: Preparing to enter system sleep state S3
[103336.437222] ACPI: EC: event blocked
[103336.437227] ACPI: EC: EC stopped
[103336.437229] ACPI: PM: Saving platform NVS memory
[103336.440526] Disabling non-boot CPUs ...
[103336.442758] smpboot: CPU 3 is now offline
[103336.446267] smpboot: CPU 2 is now offline
[103336.450740] smpboot: CPU 1 is now offline
[103336.460375] ACPI: PM: Low-level resume complete
[103336.460444] ACPI: EC: EC started
[103336.460445] ACPI: PM: Restoring platform NVS memory
[103336.462920] Enabling non-boot CPUs ...
[103336.462957] smpboot: Booting Node 0 Processor 1 APIC 0x2
[103336.464075] CPU1 is up
[103336.464101] smpboot: Booting Node 0 Processor 2 APIC 0x1
[103336.465174] CPU2 is up
[103336.465202] smpboot: Booting Node 0 Processor 3 APIC 0x3
[103336.466185] CPU3 is up
[103336.470077] ACPI: PM: Waking up from system sleep state S3
[103336.515621] ACPI: EC: interrupt unblocked
[103336.533797] ACPI: EC: event unblocked
[103336.551889] nvme nvme0: 4/0/0 default/read/poll queues
[103336.783857] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[103336.815802] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[103336.981897] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[103337.039831] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[103337.299835] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[103337.439979] OOM killer enabled.
[103337.439981] Restarting tasks ... done.
[103337.443141] random: crng reseeded on system resumption
[103337.527580] PM: suspend exit
[103337.648339] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[103337.648349] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[103337.971829] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[103338.007626] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[103338.034081] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[103345.605709] wlp58s0: authenticate with e4:37:9f:33:9d:8b (local address=9c:b6:d0:d1:6a:b1)
[103345.605755] wlp58s0: send auth to e4:37:9f:33:9d:8b (try 1/3)
[103345.608038] wlp58s0: authenticated
[103345.611818] wlp58s0: associate with e4:37:9f:33:9d:8b (try 1/3)
[103345.619029] wlp58s0: RX AssocResp from e4:37:9f:33:9d:8b (capab=0x1111 status=0 aid=10)
[103345.622760] wlp58s0: associated
[103345.638783] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e4:37:9f:33:9d:8b
[103369.596104] wlp58s0: deauthenticating from e4:37:9f:33:9d:8b by local choice (Reason: 3=DEAUTH_LEAVING)
[103400.138490] PM: suspend entry (deep)
[103400.154005] Filesystems sync: 0.015 seconds
[103400.170587] Freezing user space processes
[103400.173699] Freezing user space processes completed (elapsed 0.003 seconds)
[103400.173722] OOM killer disabled.
[103400.173724] Freezing remaining freezable tasks
[103400.740061] Freezing remaining freezable tasks completed (elapsed 0.566 seconds)
[103400.740214] printk: Suspending console(s) (use no_console_suspend to debug)
[103401.316883] ACPI: EC: interrupt blocked
[103401.351987] ACPI: PM: Preparing to enter system sleep state S3
[103401.365351] ACPI: EC: event blocked
[103401.365355] ACPI: EC: EC stopped
[103401.365357] ACPI: PM: Saving platform NVS memory
[103401.369740] Disabling non-boot CPUs ...
[103401.372463] smpboot: CPU 3 is now offline
[103401.378177] smpboot: CPU 2 is now offline
[103401.384016] smpboot: CPU 1 is now offline
[103401.392725] ACPI: PM: Low-level resume complete
[103401.392770] ACPI: EC: EC started
[103401.392771] ACPI: PM: Restoring platform NVS memory
[103401.394663] Enabling non-boot CPUs ...
[103401.394689] smpboot: Booting Node 0 Processor 1 APIC 0x2
[103401.395440] CPU1 is up
[103401.395457] smpboot: Booting Node 0 Processor 2 APIC 0x1
[103401.396250] CPU2 is up
[103401.396266] smpboot: Booting Node 0 Processor 3 APIC 0x3
[103401.397006] CPU3 is up
[103401.399817] ACPI: PM: Waking up from system sleep state S3
[103401.432040] ACPI: EC: interrupt unblocked
[103401.448160] ACPI: EC: event unblocked
[103401.460471] nvme nvme0: 4/0/0 default/read/poll queues
[103401.683985] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[103401.704045] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[103401.964027] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[103402.220038] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[103402.363367] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[103402.363374] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[103402.364361] OOM killer enabled.
[103402.364364] Restarting tasks ... done.
[103402.366356] random: crng reseeded on system resumption
[103402.499159] PM: suspend exit
[103402.728091] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[103402.757878] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[103402.914430] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[103408.175408] wlp58s0: authenticate with e4:37:9f:33:9d:8b (local address=9c:b6:d0:d1:6a:b1)
[103408.175423] wlp58s0: send auth to e4:37:9f:33:9d:8b (try 1/3)
[103408.178722] wlp58s0: authenticated
[103408.183995] wlp58s0: associate with e4:37:9f:33:9d:8b (try 1/3)
[103408.193960] wlp58s0: RX AssocResp from e4:37:9f:33:9d:8b (capab=0x1111 status=0 aid=10)
[103408.198201] wlp58s0: associated
[103408.241435] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e4:37:9f:33:9d:8b
[106335.692008] ath10k_pci 0000:3a:00.0: firmware crashed! (guid b6eb8244-0e48-4785-8247-901e833ed59a)
[106335.692036] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[106335.692050] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[106335.692387] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[106335.692742] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[106335.692750] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[106335.702933] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
[106335.702945] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
[106335.702955] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
[106335.702970] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
[106335.702989] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 20 20 65 66
[106335.703005] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 5 3 65 66
[106335.703020] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 1 1 3 1
[106335.703034] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 4665 4663 92 28
[106335.703049] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
[106335.703064] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 31 31 18 18
[106335.703078] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1 1 0
[106335.806418] ieee80211 phy0: Hardware restart was requested
[106336.116606] ath10k_pci 0000:3a:00.0: device successfully recovered
[106416.467122] wlp58s0: deauthenticating from e4:37:9f:33:9d:8b by local choice (Reason: 3=DEAUTH_LEAVING)
[106428.212833] wlp58s0: authenticate with e4:37:9f:2a:94:4b (local address=9c:b6:d0:d1:6a:b1)
[106428.212851] wlp58s0: send auth to e4:37:9f:2a:94:4b (try 1/3)
[106428.214725] wlp58s0: authenticated
[106428.218338] wlp58s0: associate with e4:37:9f:2a:94:4b (try 1/3)
[106428.228606] wlp58s0: RX AssocResp from e4:37:9f:2a:94:4b (capab=0x1111 status=0 aid=2)
[106428.231724] wlp58s0: associated
[106428.274672] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by e4:37:9f:2a:94:4b
[106534.943371] wlp58s0: deauthenticating from e4:37:9f:2a:94:4b by local choice (Reason: 3=DEAUTH_LEAVING)
[106536.490629] PM: suspend entry (deep)
[106536.500944] Filesystems sync: 0.010 seconds
[106536.503547] Freezing user space processes
[106536.505360] Freezing user space processes completed (elapsed 0.001 seconds)
[106536.505364] OOM killer disabled.
[106536.505365] Freezing remaining freezable tasks
[106536.506871] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[106536.506923] printk: Suspending console(s) (use no_console_suspend to debug)
[106537.123973] ACPI: EC: interrupt blocked
[106537.150465] ACPI: PM: Preparing to enter system sleep state S3
[106537.160543] ACPI: EC: event blocked
[106537.160548] ACPI: EC: EC stopped
[106537.160550] ACPI: PM: Saving platform NVS memory
[106537.163863] Disabling non-boot CPUs ...
[106537.165983] smpboot: CPU 3 is now offline
[106537.170244] smpboot: CPU 2 is now offline
[106537.173013] smpboot: CPU 1 is now offline
[106537.181638] ACPI: PM: Low-level resume complete
[106537.181685] ACPI: EC: EC started
[106537.181686] ACPI: PM: Restoring platform NVS memory
[106537.183586] Enabling non-boot CPUs ...
[106537.183611] smpboot: Booting Node 0 Processor 1 APIC 0x2
[106537.184352] CPU1 is up
[106537.184369] smpboot: Booting Node 0 Processor 2 APIC 0x1
[106537.185158] CPU2 is up
[106537.185173] smpboot: Booting Node 0 Processor 3 APIC 0x3
[106537.185925] CPU3 is up
[106537.188733] ACPI: PM: Waking up from system sleep state S3
[106537.218524] ACPI: EC: interrupt unblocked
[106537.232944] ACPI: EC: event unblocked
[106537.246962] nvme nvme0: 4/0/0 default/read/poll queues
[106537.465441] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[106537.485491] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[106537.635376] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[106537.745467] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[106538.001485] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[106538.142505] OOM killer enabled.
[106538.142509] Restarting tasks ... done.
[106538.144934] random: crng reseeded on system resumption
[106538.260066] PM: suspend exit
[106538.347332] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[106538.347337] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[106538.706060] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[106538.731208] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[106538.797789] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[106543.628898] wlp58s0: authenticate with e4:38:7e:4e:ff:ab (local address=9c:b6:d0:d1:6a:b1)
[106543.628905] wlp58s0: send auth to e4:38:7e:4e:ff:ab (try 1/3)
[106543.630774] wlp58s0: authenticated
[106543.633407] wlp58s0: associate with e4:38:7e:4e:ff:ab (try 1/3)
[106543.640297] wlp58s0: RX AssocResp from e4:38:7e:4e:ff:ab (capab=0x1111 status=0 aid=12)
[106543.643746] wlp58s0: associated
[106543.645149] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e4:38:7e:4e:ff:ab
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed!
2025-03-23 11:41 ` Paul Menzel
@ 2025-03-24 3:29 ` Baochen Qiang
2025-03-25 7:01 ` Paul Menzel
0 siblings, 1 reply; 10+ messages in thread
From: Baochen Qiang @ 2025-03-24 3:29 UTC (permalink / raw)
To: Paul Menzel, Jeff Johnson; +Cc: Kalle Valo, ath10k, LKML, jamie
On 3/23/2025 7:41 PM, Paul Menzel wrote:
> Dear Linux folks,
>
>
> Am 08.12.24 um 23:21 schrieb Paul Menzel:
>
>> Today the Wi-Fi connection stopped working, and the logs contained:
>>
>> [44177.000699] ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>> 1b4a40c5-4495-4c5b-9df9-b7395848239c)
>> [44177.000720] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id
>> 0x00340aff sub 1a56:1535
>> [44177.000731] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0
>> testmode 0
>> [44177.002450] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6
>> features wowlan,ignore-otp,mfp crc32 0793bcf2
>> [44177.004168] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
>> [44177.004176] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt- op 3 cal otp
>> max-sta 32 raw 0 hwcrypto 1
>> [44177.014494] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for
>> firmware address 4: -16
>> [44177.014498] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
>> [44177.014500] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>> [44177.014508] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>> [44177.014517] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 19 19 64 65
>> [44177.014525] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 39 37 36 37
>> [44177.014532] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 20 20 22 20
>> [44177.014540] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 6457 6457 222 158
>> [44177.014548] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>> [44177.014556] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 29 29 0 0
>> [44177.014563] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
>> [44177.109219] ieee80211 phy0: Hardware restart was requested
>> [44177.429445] ath10k_pci 0000:3a:00.0: device successfully recovered
>>
>> Please find the output of `dmesg` with two firmware crashes attached. Looking through my
>> logs since September 20th with Linux 6.11-rcX, this is not the first firmware crash. The
>> `guid` value differs pairwaise between each of them.
>
> Since my message in December I found two more crashes in the logs:
>
> Jan 20 13:11:11 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
> 0290afa9-63d2-4d66-b355-de2e12f96f4b)
>
> Feb 02 20:34:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
> 4c1fb23a-8d0e-4c03-8dfb-a5fa9ad3d2bc)
>
> I am now in a WLAN with Cisco access points, and get a few crashes:
>
> Mär 21 14:01:36 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
> bc05fa56-0033-4fca-bfc0-660568f560fd)
> Mär 23 11:54:24 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
> b6eb8244-0e48-4785-8247-901e833ed59a)
>
> [42307.272046] ath10k_pci 0000:3a:00.0: firmware crashed! (guid bc05fa56-0033-4fca-
> bfc0-660568f560fd)
> [42307.272078] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id
> 0x00340aff sub 1a56:1535
> [42307.272094] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0
> testmode 0
> [42307.272452] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6
> features wowlan,ignore-otp,mfp crc32 0793bcf2
> [42307.272825] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
> [42307.272834] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta
> 32 raw 0 hwcrypto 1
> [42307.283011] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware
> address 4: -16
> [42307.283024] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
> [42307.283034] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
> [42307.283050] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
> [42307.283070] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 5 5 82 83
> [42307.283088] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 53 47 45 46
> [42307.283104] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 13 13 14 12
> [42307.283120] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 67 67 98 34
> [42307.283135] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
> [42307.283151] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 22 22 24 24
> [42307.283167] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1 1 0
> [42307.371777] ieee80211 phy0: Hardware restart was requested
> [42309.383940] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info
> [42309.690205] ath10k_pci 0000:3a:00.0: device successfully recovered
> [43924.050746] wlp58s0: deauthenticating from 48:2f:6b:7a:61:54 by local choice
> (Reason: 3=DEAUTH_LEAVING)
>
> Baochen, do you have an idea? Also how to fix the dump errors?
could you share AP model? and any specific test steps you hit it?
regarding the dump error, I think it is due to unresponsive firmware since it crashes.
We'd better focus on the crash first.
>
> Jamie (Cc:) also reported this this January 2025 *Ath10k firmware crash* [1].
>
>
> Kind regards,
>
> Paul
>
>
>> PS: Other times:
>>
>> -- Boot caea92a03f6d4776926f451f8281ea31 --
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>> 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
>> Sep 26 12:32:58 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>> c4a6c6a2-3cf4-445e-b16b-2baa35d547f3)
>> Sep 26 12:46:02 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>> b8c8a5f0-7ff7-45c3-8ecb-7ba8074ba6f7)
>>
>> -- Boot 26e7175e65254625bf58276e9532773e --
>> Okt 23 12:11:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>> 1b3f438c-339c-4ad1-9d82-92a96a07c3c2)
>>
>> Earliest crash:
>>
>> Sep 26 10:41:36 abreu kernel: Linux version 6.11.0-07273-g1e7530883cd2
>> (build@bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-5) 14.2.0, GNU ld (GNU
>> Binutils for Debian) 2.43.1) #12 SMP PREEMPT_DYNAMIC Sun Sep 22 09:57:36 CEST 2024
>> […]
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>> 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000
>> chip_id 0x00340aff sub 1a56:1535
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing
>> 0 dfs 0 testmode 0
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309-
>> api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32
>> d2863f91
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3
>> cal otp max-sta 32 raw 0 hwcrypto 1
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get memcpy hi address
>> for firmware address 4: -16
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to read firmware dump
>> area: -16
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800 28 28 265 266
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 29 27 90 91
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000 15 15 17 15
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400 3887 3887 217 153
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 20 20 16 16
>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
>
>
> [1]: https://lore.kernel.org/all/a5b15899-b214-403b-a1b2-84a948e776ef@stimulussoft.com/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed!
2025-03-24 3:29 ` Baochen Qiang
@ 2025-03-25 7:01 ` Paul Menzel
2025-05-14 8:08 ` Paul Menzel
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2025-03-25 7:01 UTC (permalink / raw)
To: Baochen Qiang, Jeff Johnson; +Cc: Kalle Valo, ath10k, LKML, jamie
Dear Baochen,
Thank you for your quick reply.
Am 24.03.25 um 04:29 schrieb Baochen Qiang:
> On 3/23/2025 7:41 PM, Paul Menzel wrote:
>> Am 08.12.24 um 23:21 schrieb Paul Menzel:
>>
>>> Today the Wi-Fi connection stopped working, and the logs contained:
>>>
>>> [44177.000699] ath10k_pci 0000:3a:00.0: firmware crashed! (guid 1b4a40c5-4495-4c5b-9df9-b7395848239c)
>>> [44177.000720] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
>>> [44177.000731] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
>>> [44177.002450] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>>> [44177.004168] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
>>> [44177.004176] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt- op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>>> [44177.014494] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
>>> [44177.014498] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
>>> [44177.014500] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>>> [44177.014508] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>>> [44177.014517] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 19 19 64 65
>>> [44177.014525] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 39 37 36 37
>>> [44177.014532] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 20 20 22 20
>>> [44177.014540] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 6457 6457 222 158
>>> [44177.014548] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>>> [44177.014556] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 29 29 0 0
>>> [44177.014563] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
>>> [44177.109219] ieee80211 phy0: Hardware restart was requested
>>> [44177.429445] ath10k_pci 0000:3a:00.0: device successfully recovered
>>>
>>> Please find the output of `dmesg` with two firmware crashes attached. Looking through my
>>> logs since September 20th with Linux 6.11-rcX, this is not the first firmware crash. The
>>> `guid` value differs pairwaise between each of them.
>>
>> Since my message in December I found two more crashes in the logs:
>>
>> Jan 20 13:11:11 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 0290afa9-63d2-4d66-b355-de2e12f96f4b)
>>
>> Feb 02 20:34:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 4c1fb23a-8d0e-4c03-8dfb-a5fa9ad3d2bc)
>>
>> I am now in a WLAN with Cisco access points, and get a few crashes:
>>
>> Mär 21 14:01:36 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid bc05fa56-0033-4fca-bfc0-660568f560fd)
>> Mär 23 11:54:24 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid b6eb8244-0e48-4785-8247-901e833ed59a)
>>
>> [42307.272046] ath10k_pci 0000:3a:00.0: firmware crashed! (guid bc05fa56-0033-4fca-bfc0-660568f560fd)
>> [42307.272078] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
>> [42307.272094] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
>> [42307.272452] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>> [42307.272825] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
>> [42307.272834] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>> [42307.283011] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
>> [42307.283024] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
>> [42307.283034] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>> [42307.283050] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>> [42307.283070] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 5 5 82 83
>> [42307.283088] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 53 47 45 46
>> [42307.283104] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 13 13 14 12
>> [42307.283120] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 67 67 98 34
>> [42307.283135] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>> [42307.283151] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 22 22 24 24
>> [42307.283167] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1 1 0
>> [42307.371777] ieee80211 phy0: Hardware restart was requested
>> [42309.383940] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info
>> [42309.690205] ath10k_pci 0000:3a:00.0: device successfully recovered
>> [43924.050746] wlp58s0: deauthenticating from 48:2f:6b:7a:61:54 by local choice (Reason: 3=DEAUTH_LEAVING)
>>
>> Baochen, do you have an idea? Also how to fix the dump errors?
>
> could you share AP model? and any specific test steps you hit it?
Sorry, I do not know the AP model. It was at a university network. After
sending my email it also happened with a FRITZ!Box 7590. It all was the
same boot cycle and over 70 ACPI S3 suspend/resume cycles happened.
```
[…]
Mar 23 21:26:32 abreu kernel: PM: suspend entry (deep)
Mar 23 21:26:32 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-DSCP-POLICY clear_all
Mar 23 21:26:32 abreu wpa_supplicant[572998]: nl80211: deinit
ifname=wlp58s0 disabled_11b_rates=0
[…]
Mar 23 21:58:07 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-CONNECTED - Connection to dc:15:c8:46:1c:4b completed [id=0
id_str=]
[…]
Mar 23 21:58:10 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Mar 23 21:58:14 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Mar 23 21:58:17 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Mar 23 21:58:18 abreu systemd[1]: NetworkManager-dispatcher.service:
Deactivated successfully.
Mar 23 21:58:20 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Mar 23 21:58:23 abreu rtkit-daemon[932]: Supervising 1 threads of 1
processes of 1 users.
Mar 23 21:58:23 abreu rtkit-daemon[932]: Supervising 1 threads of 1
processes of 1 users.
Mar 23 21:58:24 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Mar 23 21:58:27 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Mar 23 21:58:30 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Mar 23 21:58:34 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Mar 23 21:58:37 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Mar 23 21:58:40 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Mar 23 21:58:44 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
[…]
Mar 23 22:01:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group
rekeying completed with dc:15:c8:46:1c:4b [GTK=CCMP]
Mar 23 22:03:09 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Mar 23 22:03:09 abreu wpa_supplicant[572998]: wlp58s0:
CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
[…]
Mar 23 22:10:31 abreu systemd[1456]: Started
app-gnome-ptyxis-1551384.scope - Application launched by gsd-media-keys.
Mar 23 22:10:32 abreu systemd[1456]: Started
ptyxis-spawn-aec65fc6-84bf-4f85-8dad-c6c4e1e39e99.scope - [systemd-run]
/usr/bin/bash.
Mar 23 22:11:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group
rekeying completed with dc:15:c8:46:1c:4b [GTK=CCMP]
Mar 23 22:11:35 abreu rtkit-daemon[932]: Supervising 1 threads of 1
processes of 1 users.
[…]
Mar 23 22:21:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group
rekeying completed with dc:15:c8:46:1c:4b [GTK=CCMP]
[…]
Mar 23 22:27:24 abreu gnome-shell[1647]: JS ERROR: TypeError: event is null
addClickAction/<@resource:///org/gnome/shell/ui/dnd.js:151:13
@resource:///org/gnome/shell/ui/init.js:21:20
Mar 23 22:31:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group
rekeying completed with dc:15:c8:46:1c:4b [GTK=CCMP]
Mar 23 22:32:13 abreu systemd-timesyncd[410]: Contacted time server
17.253.14.251:123 (0.debian.pool.ntp.org).
Mar 23 22:35:01 abreu CRON[1553601]: pam_unix(cron:session): session
opened for user root(uid=0) by root(uid=0)
Mar 23 22:35:01 abreu CRON[1553603]: (root) CMD (command -v debian-sa1 >
/dev/null && debian-sa1 1 1)
Mar 23 22:35:01 abreu CRON[1553601]: pam_unix(cron:session): session
closed for user root
Mar 23 22:36:09 abreu kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic
update failure on pipe A (start=6 end=7) time 266 us, min 1788, max
1799, scanline start 1781, end 1810
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed!
(guid 45f495a9-56a5-48e5-aa94-1d8ff413720e)
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2
target 0x05030000 chip_id 0x00340aff sub 1a56:1535
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0
debugfs 0 tracing 0 dfs 0 testmode 0
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver
WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2
bmi_id N/A crc32 d2863f91
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87
wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get
memcpy hi address for firmware address 4: -16
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: failed to read
firmware dump area: -16
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine
register dump:
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400
12 12 3 3
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800
23 23 36 37
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00
31 27 89 90
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000
22 22 24 22
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400
4329 4329 181 117
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800
0 0 64 0
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00
10 10 16 16
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000
1 1 1 0
Mar 23 22:37:35 abreu kernel: ieee80211 phy0: Hardware restart was requested
Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: device
successfully recovered
Mar 23 22:38:00 abreu gnome-shell[1647]: JS ERROR: TypeError: event is null
addClickAction/<@resource:///org/gnome/shell/ui/dnd.js:151:13
@resource:///org/gnome/shell/ui/init.js:21:20
[…]
```
Unfortunately, I do not know how to reproduce it. I was browsing and had
some SSH sessions running. I also did some bandwidth tests by
downloading some files, and sometimes it went up to 30 MB/s.
wget -O /dev/null
http://deb.debian.org/debian/pool/main/f/flightgear-data/flightgear-data-base_2020.3.19+dfsg-1_all.deb
But I do *not* know, when the hang happened, and if it is related at
all. The crash with the FRITZ!Box did also not involve any large
downloads during his time.
So, I unfortunately, do not know how to reproduce it.
I was hoping the firmware dump could shed more light on it, and ease
debugging on your and my end.
> regarding the dump error, I think it is due to unresponsive firmware since it crashes.
> We'd better focus on the crash first.
>
>> Jamie (Cc:) also reported this this January 2025 *Ath10k firmware crash* [1].
Kind regards,
Paul
>>> PS: Other times:
>>>
>>> -- Boot caea92a03f6d4776926f451f8281ea31 --
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
>>> Sep 26 12:32:58 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid c4a6c6a2-3cf4-445e-b16b-2baa35d547f3)
>>> Sep 26 12:46:02 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid b8c8a5f0-7ff7-45c3-8ecb-7ba8074ba6f7)
>>>
>>> -- Boot 26e7175e65254625bf58276e9532773e --
>>> Okt 23 12:11:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 1b3f438c-339c-4ad1-9d82-92a96a07c3c2)
>>>
>>> Earliest crash:
>>>
>>> Sep 26 10:41:36 abreu kernel: Linux version 6.11.0-07273-g1e7530883cd2
>>> (build@bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-5) 14.2.0, GNU ld (GNU Binutils for Debian) 2.43.1) #12 SMP PREEMPT_DYNAMIC Sun Sep 22 09:57:36 CEST 2024
>>> […]
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800 28 28 265 266
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 29 27 90 91
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000 15 15 17 15
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400 3887 3887 217 153
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 20 20 16 16
>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
>>
>>
>> [1]: https://lore.kernel.org/all/a5b15899-b214-403b-a1b2-84a948e776ef@stimulussoft.com/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed!
2025-03-25 7:01 ` Paul Menzel
@ 2025-05-14 8:08 ` Paul Menzel
[not found] ` <1909038a-bde9-4def-bcb8-0f67bff5c62d@stimulussoft.com>
2025-07-20 8:43 ` Paul Menzel
0 siblings, 2 replies; 10+ messages in thread
From: Paul Menzel @ 2025-05-14 8:08 UTC (permalink / raw)
To: Baochen Qiang, Jeff Johnson; +Cc: ath10k, LKML, jamie
Dear Baochen,
another crash happened yesterday after six weeks of silence.
Am 25.03.25 um 08:01 schrieb Paul Menzel:
> Am 24.03.25 um 04:29 schrieb Baochen Qiang:
>
>> On 3/23/2025 7:41 PM, Paul Menzel wrote:
>
>>> Am 08.12.24 um 23:21 schrieb Paul Menzel:
>>>
>>>> Today the Wi-Fi connection stopped working, and the logs contained:
>>>>
>>>> [44177.000699] ath10k_pci 0000:3a:00.0: firmware crashed! (guid 1b4a40c5-4495-4c5b-9df9-b7395848239c)
>>>> [44177.000720] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
>>>> [44177.000731] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
>>>> [44177.002450] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>>>> [44177.004168] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
>>>> [44177.004176] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt- op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>>>> [44177.014494] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
>>>> [44177.014498] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
>>>> [44177.014500] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>>>> [44177.014508] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>>>> [44177.014517] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 19 19 64 65
>>>> [44177.014525] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 39 37 36 37
>>>> [44177.014532] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 20 20 22 20
>>>> [44177.014540] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 6457 6457 222 158
>>>> [44177.014548] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>>>> [44177.014556] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 29 29 0 0
>>>> [44177.014563] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
>>>> [44177.109219] ieee80211 phy0: Hardware restart was requested
>>>> [44177.429445] ath10k_pci 0000:3a:00.0: device successfully recovered
>>>>
>>>> Please find the output of `dmesg` with two firmware crashes attached. Looking
>>>> through my logs since September 20th with Linux 6.11-rcX, this is not the first
>>>> firmware crash. The `guid` value differs pairwaise between each of them.
>>>
>>> Since my message in December I found two more crashes in the logs:
>>>
>>> Jan 20 13:11:11 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 0290afa9-63d2-4d66-b355-de2e12f96f4b)
>>>
>>> Feb 02 20:34:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 4c1fb23a-8d0e-4c03-8dfb-a5fa9ad3d2bc)
>>>
>>> I am now in a WLAN with Cisco access points, and get a few crashes:
>>>
>>> Mär 21 14:01:36 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid bc05fa56-0033-4fca-bfc0-660568f560fd)
>>> Mär 23 11:54:24 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid b6eb8244-0e48-4785-8247-901e833ed59a)
>>>
>>> [42307.272046] ath10k_pci 0000:3a:00.0: firmware crashed! (guid bc05fa56-0033-4fca-bfc0-660568f560fd)
>>> [42307.272078] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
>>> [42307.272094] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
>>> [42307.272452] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>>> [42307.272825] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
>>> [42307.272834] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>>> [42307.283011] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
>>> [42307.283024] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
>>> [42307.283034] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>>> [42307.283050] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>>> [42307.283070] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 5 5 82 83
>>> [42307.283088] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 53 47 45 46
>>> [42307.283104] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 13 13 14 12
>>> [42307.283120] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 67 67 98 34
>>> [42307.283135] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>>> [42307.283151] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 22 22 24 24
>>> [42307.283167] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1 1 0
>>> [42307.371777] ieee80211 phy0: Hardware restart was requested
>>> [42309.383940] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info
>>> [42309.690205] ath10k_pci 0000:3a:00.0: device successfully recovered
>>> [43924.050746] wlp58s0: deauthenticating from 48:2f:6b:7a:61:54 by local choice (Reason: 3=DEAUTH_LEAVING)
>>>
>>> Baochen, do you have an idea? Also how to fix the dump errors?
>>
>> could you share AP model? and any specific test steps you hit it?
>
> Sorry, I do not know the AP model. It was at a university network. After
> sending my email it also happened with a FRITZ!Box 7590. It all was the
> same boot cycle and over 70 ACPI S3 suspend/resume cycles happened.
>
> ```
> […]
> Mar 23 21:26:32 abreu kernel: PM: suspend entry (deep)
> Mar 23 21:26:32 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-DSCP-POLICY clear_all
> Mar 23 21:26:32 abreu wpa_supplicant[572998]: nl80211: deinit ifname=wlp58s0 disabled_11b_rates=0
> […]
> Mar 23 21:58:07 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-CONNECTED - Connection to dc:15:c8:46:1c:4b completed [id=0 id_str=]
> […]
> Mar 23 21:58:10 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> Mar 23 21:58:14 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> Mar 23 21:58:17 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> Mar 23 21:58:18 abreu systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.
> Mar 23 21:58:20 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> Mar 23 21:58:23 abreu rtkit-daemon[932]: Supervising 1 threads of 1 processes of 1 users.
> Mar 23 21:58:23 abreu rtkit-daemon[932]: Supervising 1 threads of 1 processes of 1 users.
> Mar 23 21:58:24 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> Mar 23 21:58:27 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> Mar 23 21:58:30 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> Mar 23 21:58:34 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> Mar 23 21:58:37 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> Mar 23 21:58:40 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> Mar 23 21:58:44 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> […]
> Mar 23 22:01:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group rekeying completed with dc:15:c8:46:1c:4b [GTK=CCMP]
> Mar 23 22:03:09 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> Mar 23 22:03:09 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
> […]
> Mar 23 22:10:31 abreu systemd[1456]: Started app-gnome-ptyxis-1551384.scope - Application launched by gsd-media-keys.
> Mar 23 22:10:32 abreu systemd[1456]: Started ptyxis-spawn-aec65fc6-84bf-4f85-8dad-c6c4e1e39e99.scope - [systemd-run] /usr/bin/bash.
> Mar 23 22:11:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group rekeying completed with dc:15:c8:46:1c:4b [GTK=CCMP]
> Mar 23 22:11:35 abreu rtkit-daemon[932]: Supervising 1 threads of 1 processes of 1 users.
> […]
> Mar 23 22:21:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group rekeying completed with dc:15:c8:46:1c:4b [GTK=CCMP]
> […]
> Mar 23 22:27:24 abreu gnome-shell[1647]: JS ERROR: TypeError: event is null addClickAction/<@resource:///org/gnome/shell/ui/dnd.js:151:13 @resource:///org/gnome/shell/ui/init.js:21:20
> Mar 23 22:31:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group rekeying completed with dc:15:c8:46:1c:4b [GTK=CCMP]
> Mar 23 22:32:13 abreu systemd-timesyncd[410]: Contacted time server 17.253.14.251:123 (0.debian.pool.ntp.org).
> Mar 23 22:35:01 abreu CRON[1553601]: pam_unix(cron:session): sessionopened for user root(uid=0) by root(uid=0)
> Mar 23 22:35:01 abreu CRON[1553603]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
> Mar 23 22:35:01 abreu CRON[1553601]: pam_unix(cron:session): session closed for user root
> Mar 23 22:36:09 abreu kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=6 end=7) time 266 us, min 1788, max 1799, scanline start 1781, end 1810
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 45f495a9-56a5-48e5-aa94-1d8ff413720e)
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: failed to readfirmware dump area: -16
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine register dump:
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800 23 23 36 37
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 31 27 89 90
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000 22 22 24 22
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400 4329 4329 181 117
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 10 10 16 16
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1 1 0
> Mar 23 22:37:35 abreu kernel: ieee80211 phy0: Hardware restart was requested
> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: device successfully recovered
> Mar 23 22:38:00 abreu gnome-shell[1647]: JS ERROR: TypeError: event is null addClickAction/<@resource:///org/gnome/shell/ui/dnd.js:151:13 @resource:///org/gnome/shell/ui/init.js:21:20
> […]
> ```
>
> Unfortunately, I do not know how to reproduce it. I was browsing and had
> some SSH sessions running. I also did some bandwidth tests by
> downloading some files, and sometimes it went up to 30 MB/s.
>
> wget -O /dev/null http://deb.debian.org/debian/pool/main/f/flightgear-data/flightgear-data-base_2020.3.19+dfsg-1_all.deb
>
> But I do *not* know, when the hang happened, and if it is related at
> all. The crash with the FRITZ!Box did also not involve any large
> downloads during this time.
>
> So, I unfortunately, do not know how to reproduce it.
>
> I was hoping the firmware dump could shed more light on it, and ease
> debugging on your and my end.
>
>> regarding the dump error, I think it is due to unresponsive firmware
>> since it crashes. We'd better focus on the crash first.
>>
>>> Jamie (Cc:) also reported this this January 2025 *Ath10k firmware
>>> crash* [1].
Yesterday it crashed when connected to an Aruba AP-205:
```
May 13 09:19:51.379037 abreu kernel: ath10k_pci 0000:3a:00.0: firmware
crashed! (guid 6112a2e3-7e6d-4f80-8145-421da9708ee0)
May 13 09:19:51.379992 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174
hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
May 13 09:19:51.380564 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig
debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
May 13 09:19:51.381091 abreu kernel: ath10k_pci 0000:3a:00.0: firmware
ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
May 13 09:19:51.381585 abreu kernel: ath10k_pci 0000:3a:00.0: board_file
api 2 bmi_id N/A crc32 d2863f91
May 13 09:19:51.382098 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver
3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
May 13 09:19:51.391018 abreu kernel: ath10k_pci 0000:3a:00.0: failed to
get memcpy hi address for firmware address 4: -16
May 13 09:19:51.391856 abreu kernel: ath10k_pci 0000:3a:00.0: failed to
read firmware dump area: -16
May 13 09:19:51.392469 abreu kernel: ath10k_pci 0000:3a:00.0: Copy
Engine register dump:
May 13 09:19:51.393029 abreu kernel: ath10k_pci 0000:3a:00.0: [00]:
0x00034400 12 12 3 3
May 13 09:19:51.393542 abreu kernel: ath10k_pci 0000:3a:00.0: [01]:
0x00034800 27 27 264 265
May 13 09:19:51.394036 abreu kernel: ath10k_pci 0000:3a:00.0: [02]:
0x00034c00 2 63 62 63
May 13 09:19:51.394574 abreu kernel: ath10k_pci 0000:3a:00.0: [03]:
0x00035000 29 29 31 29
May 13 09:19:51.395137 abreu kernel: ath10k_pci 0000:3a:00.0: [04]:
0x00035400 505 505 62 254
May 13 09:19:51.395633 abreu kernel: ath10k_pci 0000:3a:00.0: [05]:
0x00035800 0 0 64 0
May 13 09:19:51.396126 abreu kernel: ath10k_pci 0000:3a:00.0: [06]:
0x00035c00 0 0 26 26
May 13 09:19:51.396609 abreu kernel: ath10k_pci 0000:3a:00.0: [07]:
0x00036000 1 0 1 0
May 13 09:19:51.475013 abreu kernel: ieee80211 phy0: Hardware restart
was requested
May 13 09:19:51.783041 abreu kernel: ath10k_pci 0000:3a:00.0: device
successfully recovered
```
Were you or the firmware team able to pinpoint the problem, and come up
with a fix? Is there any logging I can enable to help with debugging?
Kind regards,
Paul
>>>> PS: Other times:
>>>>
>>>> -- Boot caea92a03f6d4776926f451f8281ea31 --
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
>>>> Sep 26 12:32:58 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid c4a6c6a2-3cf4-445e-b16b-2baa35d547f3)
>>>> Sep 26 12:46:02 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid b8c8a5f0-7ff7-45c3-8ecb-7ba8074ba6f7)
>>>>
>>>> -- Boot 26e7175e65254625bf58276e9532773e --
>>>> Okt 23 12:11:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 1b3f438c-339c-4ad1-9d82-92a96a07c3c2)
>>>>
>>>> Earliest crash:
>>>>
>>>> Sep 26 10:41:36 abreu kernel: Linux version 6.11.0-07273-g1e7530883cd2 (build@bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-5) 14.2.0, GNU ld (GNU Binutils for Debian) 2.43.1) #12 SMP PREEMPT_DYNAMIC Sun Sep 22 09:57:36 CEST 2024
>>>> […]
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800 28 28 265 266
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 29 27 90 91
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000 15 15 17 15
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400 3887 3887 217 153
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 20 20 16 16
>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
>>>
>>>
>>> [1]: https://lore.kernel.org/all/a5b15899-b214-403b-a1b2-84a948e776ef@stimulussoft.com/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed!
[not found] ` <1909038a-bde9-4def-bcb8-0f67bff5c62d@stimulussoft.com>
@ 2025-05-14 8:23 ` Paul Menzel
0 siblings, 0 replies; 10+ messages in thread
From: Paul Menzel @ 2025-05-14 8:23 UTC (permalink / raw)
To: Jamie; +Cc: Baochen Qiang, Jeff Johnson, ath10k, LKML
Dear Jamie,
Am 14.05.25 um 10:19 schrieb Jamie:
> Check your voltages. In my case, my voltage settings were wrong.
Where did you do this? In the system firmware?
> After adjusting them, the drivers started working again.
Then it’s a different problem. I am using a Dell XPS 13 9360 laptop, and
I didn’t fiddle with any voltages. Even if Linux’ power management
behavior changed, it’s hard to pinpoint a possible regression, as I have
no reproducer.
Kind regards,
Paul
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed!
2025-05-14 8:08 ` Paul Menzel
[not found] ` <1909038a-bde9-4def-bcb8-0f67bff5c62d@stimulussoft.com>
@ 2025-07-20 8:43 ` Paul Menzel
2025-07-21 3:21 ` Baochen Qiang
1 sibling, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2025-07-20 8:43 UTC (permalink / raw)
To: Baochen Qiang, Jeff Johnson; +Cc: ath10k, LKML, jamie
Dear Baochen, dear Jeff,
Am 14.05.25 um 10:08 schrieb Paul Menzel:
> another crash happened yesterday after six weeks of silence.
>
> Am 25.03.25 um 08:01 schrieb Paul Menzel:
>
>> Am 24.03.25 um 04:29 schrieb Baochen Qiang:
>>
>>> On 3/23/2025 7:41 PM, Paul Menzel wrote:
>>
>>>> Am 08.12.24 um 23:21 schrieb Paul Menzel:
>>>>
>>>>> Today the Wi-Fi connection stopped working, and the logs contained:
>>>>>
>>>>> [44177.000699] ath10k_pci 0000:3a:00.0: firmware crashed! (guid 1b4a40c5-4495-4c5b-9df9-b7395848239c)
>>>>> [44177.000720] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
>>>>> [44177.000731] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
>>>>> [44177.002450] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>>>>> [44177.004168] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
>>>>> [44177.004176] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt- op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>>>>> [44177.014494] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
>>>>> [44177.014498] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
>>>>> [44177.014500] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>>>>> [44177.014508] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>>>>> [44177.014517] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 19 19 64 65
>>>>> [44177.014525] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 39 37 36 37
>>>>> [44177.014532] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 20 20 22 20
>>>>> [44177.014540] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 6457 6457 222 158
>>>>> [44177.014548] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>>>>> [44177.014556] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 29 29 0 0
>>>>> [44177.014563] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
>>>>> [44177.109219] ieee80211 phy0: Hardware restart was requested
>>>>> [44177.429445] ath10k_pci 0000:3a:00.0: device successfully recovered
>>>>>
>>>>> Please find the output of `dmesg` with two firmware crashes attached. Looking
>>>>> through my logs since September 20th with Linux 6.11-rcX, this is
>>>>> not the first firmware crash. The `guid` value differs pairwaise
>>>>> between each of them.
>>>>
>>>> Since my message in December I found two more crashes in the logs:
>>>>
>>>> Jan 20 13:11:11 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 0290afa9-63d2-4d66-b355-de2e12f96f4b)
>>>>
>>>> Feb 02 20:34:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 4c1fb23a-8d0e-4c03-8dfb-a5fa9ad3d2bc)
>>>>
>>>> I am now in a WLAN with Cisco access points, and get a few crashes:
>>>>
>>>> Mär 21 14:01:36 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid bc05fa56-0033-4fca-bfc0-660568f560fd)
>>>> Mär 23 11:54:24 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid b6eb8244-0e48-4785-8247-901e833ed59a)
>>>>
>>>> [42307.272046] ath10k_pci 0000:3a:00.0: firmware crashed! (guid bc05fa56-0033-4fca-bfc0-660568f560fd)
>>>> [42307.272078] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
>>>> [42307.272094] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
>>>> [42307.272452] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>>>> [42307.272825] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
>>>> [42307.272834] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>>>> [42307.283011] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
>>>> [42307.283024] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
>>>> [42307.283034] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>>>> [42307.283050] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>>>> [42307.283070] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 5 5 82 83
>>>> [42307.283088] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 53 47 45 46
>>>> [42307.283104] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 13 13 14 12
>>>> [42307.283120] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 67 67 98 34
>>>> [42307.283135] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>>>> [42307.283151] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 22 22 24 24
>>>> [42307.283167] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1 1 0
>>>> [42307.371777] ieee80211 phy0: Hardware restart was requested
>>>> [42309.383940] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info
>>>> [42309.690205] ath10k_pci 0000:3a:00.0: device successfully recovered
>>>> [43924.050746] wlp58s0: deauthenticating from 48:2f:6b:7a:61:54 by local choice (Reason: 3=DEAUTH_LEAVING)
>>>>
>>>> Baochen, do you have an idea? Also how to fix the dump errors?
>>>
>>> could you share AP model? and any specific test steps you hit it?
>>
>> Sorry, I do not know the AP model. It was at a university network.
>> After sending my email it also happened with a FRITZ!Box 7590. It all
>> was the same boot cycle and over 70 ACPI S3 suspend/resume cycles
>> happened.
>>
>> ```
>> […]
>> Mar 23 21:26:32 abreu kernel: PM: suspend entry (deep)
>> Mar 23 21:26:32 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-DSCP-POLICY clear_all
>> Mar 23 21:26:32 abreu wpa_supplicant[572998]: nl80211: deinit ifname=wlp58s0 disabled_11b_rates=0
>> […]
>> Mar 23 21:58:07 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT- CONNECTED - Connection to dc:15:c8:46:1c:4b completed [id=0 id_str=]
>> […]
>> Mar 23 21:58:10 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> Mar 23 21:58:14 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> Mar 23 21:58:17 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> Mar 23 21:58:18 abreu systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.
>> Mar 23 21:58:20 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT- REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> Mar 23 21:58:23 abreu rtkit-daemon[932]: Supervising 1 threads of 1 processes of 1 users.
>> Mar 23 21:58:23 abreu rtkit-daemon[932]: Supervising 1 threads of 1 processes of 1 users.
>> Mar 23 21:58:24 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> Mar 23 21:58:27 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> Mar 23 21:58:30 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> Mar 23 21:58:34 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> Mar 23 21:58:37 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> Mar 23 21:58:40 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> Mar 23 21:58:44 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> […]
>> Mar 23 22:01:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group rekeying completed with dc:15:c8:46:1c:4b [GTK=CCMP]
>> Mar 23 22:03:09 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> Mar 23 22:03:09 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
>> […]
>> Mar 23 22:10:31 abreu systemd[1456]: Started app-gnome-ptyxis-1551384.scope - Application launched by gsd-media-keys.
>> Mar 23 22:10:32 abreu systemd[1456]: Started ptyxis-spawn-aec65fc6-84bf-4f85-8dad-c6c4e1e39e99.scope - [systemd-run] /usr/bin/bash.
>> Mar 23 22:11:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group rekeying completed with dc:15:c8:46:1c:4b [GTK=CCMP]
>> Mar 23 22:11:35 abreu rtkit-daemon[932]: Supervising 1 threads of 1 processes of 1 users.
>> […]
>> Mar 23 22:21:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group rekeying completed with dc:15:c8:46:1c:4b [GTK=CCMP]
>> […]
>> Mar 23 22:27:24 abreu gnome-shell[1647]: JS ERROR: TypeError: event is null addClickAction/<@resource:///org/gnome/shell/ui/dnd.js:151:13 @resource:///org/gnome/shell/ui/init.js:21:20
>> Mar 23 22:31:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group rekeying completed with dc:15:c8:46:1c:4b [GTK=CCMP]
>> Mar 23 22:32:13 abreu systemd-timesyncd[410]: Contacted time server 17.253.14.251:123 (0.debian.pool.ntp.org).
>> Mar 23 22:35:01 abreu CRON[1553601]: pam_unix(cron:session): sessionopened for user root(uid=0) by root(uid=0)
>> Mar 23 22:35:01 abreu CRON[1553603]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
>> Mar 23 22:35:01 abreu CRON[1553601]: pam_unix(cron:session): session closed for user root
>> Mar 23 22:36:09 abreu kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=6 end=7) time 266 us, min 1788, max 1799, scanline start 1781, end 1810
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 45f495a9-56a5-48e5-aa94-1d8ff413720e)
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: failed to readfirmware dump area: -16
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800 23 23 36 37
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 31 27 89 90
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000 22 22 24 22
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400 4329 4329 181 117
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 10 10 16 16
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1 1 0
>> Mar 23 22:37:35 abreu kernel: ieee80211 phy0: Hardware restart was requested
>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: device successfully recovered
>> Mar 23 22:38:00 abreu gnome-shell[1647]: JS ERROR: TypeError: event is null addClickAction/<@resource:///org/gnome/shell/ui/dnd.js:151:13 @resource:///org/gnome/shell/ui/init.js:21:20
>> […]
>> ```
>>
>> Unfortunately, I do not know how to reproduce it. I was browsing and
>> had some SSH sessions running. I also did some bandwidth tests by
>> downloading some files, and sometimes it went up to 30 MB/s.
>>
>> wget -O /dev/null http://deb.debian.org/debian/pool/main/f/flightgear-data/flightgear-data-base_2020.3.19+dfsg-1_all.deb
>>
>> But I do *not* know, when the hang happened, and if it is related at
>> all. The crash with the FRITZ!Box did also not involve any large
>> downloads during this time.
>>
>> So, I unfortunately, do not know how to reproduce it.
>>
>> I was hoping the firmware dump could shed more light on it, and ease
>> debugging on your and my end.
>>
>>> regarding the dump error, I think it is due to unresponsive firmware
>>> since it crashes. We'd better focus on the crash first.
>>>
>>>> Jamie (Cc:) also reported this this January 2025 *Ath10k firmware
>>>> crash* [1].
[As per Jamie’s reply, it was a voltage setting problem there.]
> Yesterday it crashed when connected to an Aruba AP-205:
>
> ```
> May 13 09:19:51.379037 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 6112a2e3-7e6d-4f80-8145-421da9708ee0)
> May 13 09:19:51.379992 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
> May 13 09:19:51.380564 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
> May 13 09:19:51.381091 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
> May 13 09:19:51.381585 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
> May 13 09:19:51.382098 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
> May 13 09:19:51.391018 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
> May 13 09:19:51.391856 abreu kernel: ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
> May 13 09:19:51.392469 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine register dump:
> May 13 09:19:51.393029 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
> May 13 09:19:51.393542 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800 27 27 264 265
> May 13 09:19:51.394036 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 2 63 62 63
> May 13 09:19:51.394574 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000 29 29 31 29
> May 13 09:19:51.395137 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400 505 505 62 254
> May 13 09:19:51.395633 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
> May 13 09:19:51.396126 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 0 0 26 26
> May 13 09:19:51.396609 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
> May 13 09:19:51.475013 abreu kernel: ieee80211 phy0: Hardware restart was requested
> May 13 09:19:51.783041 abreu kernel: ath10k_pci 0000:3a:00.0: device successfully recovered
> ```
>
> Were you or the firmware team able to pinpoint the problem, and come up
> with a fix? Is there any logging I can enable to help with debugging?
It also happens with a Telekom Speedport Smart 3 (Arcadyan Corporation)
router. The firmware crashed five more times since June. A reliable
Wi-Fi connection would be really appreciated. Could you send me a debug
firmware, so the firmware developers have it easier to fix it?
Kind regards,
Paul
>>>>> PS: Other times:
>>>>>
>>>>> -- Boot caea92a03f6d4776926f451f8281ea31 --
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
>>>>> Sep 26 12:32:58 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid c4a6c6a2-3cf4-445e-b16b-2baa35d547f3)
>>>>> Sep 26 12:46:02 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid b8c8a5f0-7ff7-45c3-8ecb-7ba8074ba6f7)
>>>>>
>>>>> -- Boot 26e7175e65254625bf58276e9532773e --
>>>>> Okt 23 12:11:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 1b3f438c-339c-4ad1-9d82-92a96a07c3c2)
>>>>>
>>>>> Earliest crash:
>>>>>
>>>>> Sep 26 10:41:36 abreu kernel: Linux version 6.11.0-07273-g1e7530883cd2 (build@bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-5) 14.2.0, GNU ld (GNU Binutils for Debian) 2.43.1) #12 SMP PREEMPT_DYNAMIC Sun Sep 22 09:57:36 CEST 2024
>>>>> […]
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800 28 28 265 266
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 29 27 90 91
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000 15 15 17 15
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400 3887 3887 217 153
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 20 20 16 16
>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
>>>>
>>>>
>>>> [1]: https://lore.kernel.org/all/a5b15899-b214-403b-a1b2-84a948e776ef@stimulussoft.com/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed!
2025-07-20 8:43 ` Paul Menzel
@ 2025-07-21 3:21 ` Baochen Qiang
2025-10-10 13:12 ` Paul Menzel
0 siblings, 1 reply; 10+ messages in thread
From: Baochen Qiang @ 2025-07-21 3:21 UTC (permalink / raw)
To: Paul Menzel, Jeff Johnson; +Cc: ath10k, LKML, jamie
On 7/20/2025 4:43 PM, Paul Menzel wrote:
> Dear Baochen, dear Jeff,
>
>
> Am 14.05.25 um 10:08 schrieb Paul Menzel:
>
>> another crash happened yesterday after six weeks of silence.
>>
>> Am 25.03.25 um 08:01 schrieb Paul Menzel:
>>
>>> Am 24.03.25 um 04:29 schrieb Baochen Qiang:
>>>
>>>> On 3/23/2025 7:41 PM, Paul Menzel wrote:
>>>
>>>>> Am 08.12.24 um 23:21 schrieb Paul Menzel:
>>>>>
>>>>>> Today the Wi-Fi connection stopped working, and the logs contained:
>>>>>>
>>>>>> [44177.000699] ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>>>>>> 1b4a40c5-4495-4c5b-9df9-b7395848239c)
>>>>>> [44177.000720] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000
>>>>>> chip_id 0x00340aff sub 1a56:1535
>>>>>> [44177.000731] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0
>>>>>> dfs 0 testmode 0
>>>>>> [44177.002450] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api
>>>>>> 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>>>>>> [44177.004168] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32
>>>>>> d2863f91
>>>>>> [44177.004176] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt- op 3 cal
>>>>>> otp max-sta 32 raw 0 hwcrypto 1
>>>>>> [44177.014494] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for
>>>>>> firmware address 4: -16
>>>>>> [44177.014498] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
>>>>>> [44177.014500] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>>>>>> [44177.014508] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>>>>>> [44177.014517] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 19 19 64 65
>>>>>> [44177.014525] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 39 37 36 37
>>>>>> [44177.014532] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 20 20 22 20
>>>>>> [44177.014540] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 6457 6457 222 158
>>>>>> [44177.014548] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>>>>>> [44177.014556] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 29 29 0 0
>>>>>> [44177.014563] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
>>>>>> [44177.109219] ieee80211 phy0: Hardware restart was requested
>>>>>> [44177.429445] ath10k_pci 0000:3a:00.0: device successfully recovered
>>>>>>
>>>>>> Please find the output of `dmesg` with two firmware crashes attached. Looking
>>>>>> through my logs since September 20th with Linux 6.11-rcX, this is not the first
>>>>>> firmware crash. The `guid` value differs pairwaise between each of them.
>>>>>
>>>>> Since my message in December I found two more crashes in the logs:
>>>>>
>>>>> Jan 20 13:11:11 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>>>>> 0290afa9-63d2-4d66-b355-de2e12f96f4b)
>>>>>
>>>>> Feb 02 20:34:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>>>>> 4c1fb23a-8d0e-4c03-8dfb-a5fa9ad3d2bc)
>>>>>
>>>>> I am now in a WLAN with Cisco access points, and get a few crashes:
>>>>>
>>>>> Mär 21 14:01:36 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>>>>> bc05fa56-0033-4fca-bfc0-660568f560fd)
>>>>> Mär 23 11:54:24 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>>>>> b6eb8244-0e48-4785-8247-901e833ed59a)
>>>>>
>>>>> [42307.272046] ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>>>>> bc05fa56-0033-4fca-bfc0-660568f560fd)
>>>>> [42307.272078] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id
>>>>> 0x00340aff sub 1a56:1535
>>>>> [42307.272094] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs
>>>>> 0 testmode 0
>>>>> [42307.272452] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6
>>>>> features wowlan,ignore-otp,mfp crc32 0793bcf2
>>>>> [42307.272825] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
>>>>> [42307.272834] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp
>>>>> max-sta 32 raw 0 hwcrypto 1
>>>>> [42307.283011] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for
>>>>> firmware address 4: -16
>>>>> [42307.283024] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
>>>>> [42307.283034] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>>>>> [42307.283050] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>>>>> [42307.283070] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 5 5 82 83
>>>>> [42307.283088] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 53 47 45 46
>>>>> [42307.283104] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 13 13 14 12
>>>>> [42307.283120] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 67 67 98 34
>>>>> [42307.283135] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>>>>> [42307.283151] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 22 22 24 24
>>>>> [42307.283167] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1 1 0
>>>>> [42307.371777] ieee80211 phy0: Hardware restart was requested
>>>>> [42309.383940] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info
>>>>> [42309.690205] ath10k_pci 0000:3a:00.0: device successfully recovered
>>>>> [43924.050746] wlp58s0: deauthenticating from 48:2f:6b:7a:61:54 by local choice
>>>>> (Reason: 3=DEAUTH_LEAVING)
>>>>>
>>>>> Baochen, do you have an idea? Also how to fix the dump errors?
>>>>
>>>> could you share AP model? and any specific test steps you hit it?
>>>
>>> Sorry, I do not know the AP model. It was at a university network. After sending my
>>> email it also happened with a FRITZ!Box 7590. It all was the same boot cycle and over
>>> 70 ACPI S3 suspend/resume cycles happened.
>>>
>>> ```
>>> […]
>>> Mar 23 21:26:32 abreu kernel: PM: suspend entry (deep)
>>> Mar 23 21:26:32 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-DSCP-POLICY clear_all
>>> Mar 23 21:26:32 abreu wpa_supplicant[572998]: nl80211: deinit ifname=wlp58s0
>>> disabled_11b_rates=0
>>> […]
>>> Mar 23 21:58:07 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT- CONNECTED -
>>> Connection to dc:15:c8:46:1c:4b completed [id=0 id_str=]
>>> […]
>>> Mar 23 21:58:10 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> Mar 23 21:58:14 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> Mar 23 21:58:17 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> Mar 23 21:58:18 abreu systemd[1]: NetworkManager-dispatcher.service: Deactivated
>>> successfully.
>>> Mar 23 21:58:20 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT- REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> Mar 23 21:58:23 abreu rtkit-daemon[932]: Supervising 1 threads of 1 processes of 1 users.
>>> Mar 23 21:58:23 abreu rtkit-daemon[932]: Supervising 1 threads of 1 processes of 1 users.
>>> Mar 23 21:58:24 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> Mar 23 21:58:27 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> Mar 23 21:58:30 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> Mar 23 21:58:34 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> Mar 23 21:58:37 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> Mar 23 21:58:40 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> Mar 23 21:58:44 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> […]
>>> Mar 23 22:01:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group rekeying completed
>>> with dc:15:c8:46:1c:4b [GTK=CCMP]
>>> Mar 23 22:03:09 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> Mar 23 22:03:09 abreu wpa_supplicant[572998]: wlp58s0: CTRL-EVENT-REGDOM-CHANGE
>>> init=BEACON_HINT type=UNKNOWN
>>> […]
>>> Mar 23 22:10:31 abreu systemd[1456]: Started app-gnome-ptyxis-1551384.scope -
>>> Application launched by gsd-media-keys.
>>> Mar 23 22:10:32 abreu systemd[1456]: Started ptyxis-spawn-aec65fc6-84bf-4f85-8dad-
>>> c6c4e1e39e99.scope - [systemd-run] /usr/bin/bash.
>>> Mar 23 22:11:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group rekeying completed
>>> with dc:15:c8:46:1c:4b [GTK=CCMP]
>>> Mar 23 22:11:35 abreu rtkit-daemon[932]: Supervising 1 threads of 1 processes of 1 users.
>>> […]
>>> Mar 23 22:21:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group rekeying completed
>>> with dc:15:c8:46:1c:4b [GTK=CCMP]
>>> […]
>>> Mar 23 22:27:24 abreu gnome-shell[1647]: JS ERROR: TypeError: event is null
>>> addClickAction/<@resource:///org/gnome/shell/ui/dnd.js:151:13 @resource:///org/gnome/
>>> shell/ui/init.js:21:20
>>> Mar 23 22:31:07 abreu wpa_supplicant[572998]: wlp58s0: WPA: Group rekeying completed
>>> with dc:15:c8:46:1c:4b [GTK=CCMP]
>>> Mar 23 22:32:13 abreu systemd-timesyncd[410]: Contacted time server 17.253.14.251:123
>>> (0.debian.pool.ntp.org).
>>> Mar 23 22:35:01 abreu CRON[1553601]: pam_unix(cron:session): sessionopened for user
>>> root(uid=0) by root(uid=0)
>>> Mar 23 22:35:01 abreu CRON[1553603]: (root) CMD (command -v debian-sa1 > /dev/null &&
>>> debian-sa1 1 1)
>>> Mar 23 22:35:01 abreu CRON[1553601]: pam_unix(cron:session): session closed for user root
>>> Mar 23 22:36:09 abreu kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on
>>> pipe A (start=6 end=7) time 266 us, min 1788, max 1799, scanline start 1781, end 1810
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>>> 45f495a9-56a5-48e5-aa94-1d8ff413720e)
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000
>>> chip_id 0x00340aff sub 1a56:1535
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0
>>> tracing 0 dfs 0 testmode 0
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver
>>> WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A
>>> crc32 d2863f91
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3
>>> cal otp max-sta 32 raw 0 hwcrypto 1
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get memcpy hi address
>>> for firmware address 4: -16
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: failed to readfirmware dump
>>> area: -16
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800 23 23 36 37
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 31 27 89 90
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000 22 22 24 22
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400 4329 4329 181 117
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 10 10 16 16
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 1 1 0
>>> Mar 23 22:37:35 abreu kernel: ieee80211 phy0: Hardware restart was requested
>>> Mar 23 22:37:35 abreu kernel: ath10k_pci 0000:3a:00.0: device successfully recovered
>>> Mar 23 22:38:00 abreu gnome-shell[1647]: JS ERROR: TypeError: event is null
>>> addClickAction/<@resource:///org/gnome/shell/ui/dnd.js:151:13 @resource:///org/gnome/
>>> shell/ui/init.js:21:20
>>> […]
>>> ```
>>>
>>> Unfortunately, I do not know how to reproduce it. I was browsing and had some SSH
>>> sessions running. I also did some bandwidth tests by downloading some files, and
>>> sometimes it went up to 30 MB/s.
>>>
>>> wget -O /dev/null http://deb.debian.org/debian/pool/main/f/flightgear-data/
>>> flightgear-data-base_2020.3.19+dfsg-1_all.deb
>>>
>>> But I do *not* know, when the hang happened, and if it is related at all. The crash
>>> with the FRITZ!Box did also not involve any large downloads during this time.
>>>
>>> So, I unfortunately, do not know how to reproduce it.
>>>
>>> I was hoping the firmware dump could shed more light on it, and ease debugging on your
>>> and my end.
>>>
>>>> regarding the dump error, I think it is due to unresponsive firmware since it crashes.
>>>> We'd better focus on the crash first.
>>>>
>>>>> Jamie (Cc:) also reported this this January 2025 *Ath10k firmware crash* [1].
>
> [As per Jamie’s reply, it was a voltage setting problem there.]
>
>> Yesterday it crashed when connected to an Aruba AP-205:
>>
>> ```
>> May 13 09:19:51.379037 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>> 6112a2e3-7e6d-4f80-8145-421da9708ee0)
>> May 13 09:19:51.379992 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target
>> 0x05030000 chip_id 0x00340aff sub 1a56:1535
>> May 13 09:19:51.380564 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0
>> tracing 0 dfs 0 testmode 0
>> May 13 09:19:51.381091 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver
>> WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>> May 13 09:19:51.381585 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/
>> A crc32 d2863f91
>> May 13 09:19:51.382098 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-
>> op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>> May 13 09:19:51.391018 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get memcpy hi
>> address for firmware address 4: -16
>> May 13 09:19:51.391856 abreu kernel: ath10k_pci 0000:3a:00.0: failed to read firmware
>> dump area: -16
>> May 13 09:19:51.392469 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>> May 13 09:19:51.393029 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12
>> 3 3
>> May 13 09:19:51.393542 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800 27 27
>> 264 265
>> May 13 09:19:51.394036 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 2 63
>> 62 63
>> May 13 09:19:51.394574 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000 29 29
>> 31 29
>> May 13 09:19:51.395137 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400 505 505
>> 62 254
>> May 13 09:19:51.395633 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0
>> 64 0
>> May 13 09:19:51.396126 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 0 0
>> 26 26
>> May 13 09:19:51.396609 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0
>> 1 0
>> May 13 09:19:51.475013 abreu kernel: ieee80211 phy0: Hardware restart was requested
>> May 13 09:19:51.783041 abreu kernel: ath10k_pci 0000:3a:00.0: device successfully recovered
>> ```
>>
>> Were you or the firmware team able to pinpoint the problem, and come up with a fix? Is
>> there any logging I can enable to help with debugging?
>
> It also happens with a Telekom Speedport Smart 3 (Arcadyan Corporation) router. The
> firmware crashed five more times since June. A reliable Wi-Fi connection would be really
> appreciated. Could you send me a debug firmware, so the firmware developers have it easier
> to fix it?
Paul, we are working on getting leagle approval on collecting necessary information, such
as firmwre dump etc, from community. Once done we will share guides to collect them to
debug further.
>
>
> Kind regards,
>
> Paul
>
>
>>>>>> PS: Other times:
>>>>>>
>>>>>> -- Boot caea92a03f6d4776926f451f8281ea31 --
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>>>>>> 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
>>>>>> Sep 26 12:32:58 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>>>>>> c4a6c6a2-3cf4-445e-b16b-2baa35d547f3)
>>>>>> Sep 26 12:46:02 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>>>>>> b8c8a5f0-7ff7-45c3-8ecb-7ba8074ba6f7)
>>>>>>
>>>>>> -- Boot 26e7175e65254625bf58276e9532773e --
>>>>>> Okt 23 12:11:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>>>>>> 1b3f438c-339c-4ad1-9d82-92a96a07c3c2)
>>>>>>
>>>>>> Earliest crash:
>>>>>>
>>>>>> Sep 26 10:41:36 abreu kernel: Linux version 6.11.0-07273-g1e7530883cd2
>>>>>> (build@bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-5) 14.2.0, GNU ld (GNU
>>>>>> Binutils for Debian) 2.43.1) #12 SMP PREEMPT_DYNAMIC Sun Sep 22 09:57:36 CEST 2024
>>>>>> […]
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed! (guid
>>>>>> 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target
>>>>>> 0x05030000 chip_id 0x00340aff sub 1a56:1535
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0
>>>>>> tracing 0 dfs 0 testmode 0
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver
>>>>>> WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A
>>>>>> crc32 d2863f91
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op
>>>>>> 3 cal otp max-sta 32 raw 0 hwcrypto 1
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get memcpy hi
>>>>>> address for firmware address 4: -16
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to read firmware dump
>>>>>> area: -16
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine register dump:
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800 28 28 265 266
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 29 27 90 91
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000 15 15 17 15
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400 3887 3887
>>>>>> 217 153
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 20 20 16 16
>>>>>> Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
>>>>>
>>>>>
>>>>> [1]: https://lore.kernel.org/all/a5b15899-b214-403b-a1b2-84a948e776ef@stimulussoft.com/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed!
2025-07-21 3:21 ` Baochen Qiang
@ 2025-10-10 13:12 ` Paul Menzel
2025-10-13 1:49 ` Baochen Qiang
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2025-10-10 13:12 UTC (permalink / raw)
To: Baochen Qiang, Jeff Johnson; +Cc: ath10k, LKML, jamie
Dear Baochen,
Am 21.07.25 um 05:21 schrieb Baochen Qiang:
> On 7/20/2025 4:43 PM, Paul Menzel wrote:
>> Am 14.05.25 um 10:08 schrieb Paul Menzel:
[…]
>>> Were you or the firmware team able to pinpoint the problem, and
>>> come up with a fix? Is there any logging I can enable to help
>>> with debugging?
>>
>> It also happens with a Telekom Speedport Smart 3 (Arcadyan
>> Corporation) router. The firmware crashed five more times since
>> June. A reliable Wi-Fi connection would be really appreciated.
>> Could you send me a debug firmware, so the firmware developers
>> have it easier to fix it?
>
> Paul, we are working on getting legal approval on collecting
> necessary information, such as firmware dump etc, from community.
> Once done we will share guides to collect them to debug further.
I just wanted to know, if there was a conclusion yet.
Kind regards,
Paul
PS: I set debug_mask to 0xffffffff a while back, and it logged so much,
that my old boot logs are gone from the systemd journal now. ;-)
echo 0xffffffff | sudo tee
/sys/module/ath10k_core/parameters/debug_mask
Any hint on what to set, when the crashes happen?
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed!
2025-10-10 13:12 ` Paul Menzel
@ 2025-10-13 1:49 ` Baochen Qiang
0 siblings, 0 replies; 10+ messages in thread
From: Baochen Qiang @ 2025-10-13 1:49 UTC (permalink / raw)
To: Paul Menzel, Jeff Johnson; +Cc: ath10k, LKML, jamie
On 10/10/2025 9:12 PM, Paul Menzel wrote:
> Dear Baochen,
>
>
> Am 21.07.25 um 05:21 schrieb Baochen Qiang:
>
>> On 7/20/2025 4:43 PM, Paul Menzel wrote:
>
>>> Am 14.05.25 um 10:08 schrieb Paul Menzel:
>
> […]
>
>>>> Were you or the firmware team able to pinpoint the problem, and
>>>> come up with a fix? Is there any logging I can enable to help
>>>> with debugging?
>>>
>>> It also happens with a Telekom Speedport Smart 3 (Arcadyan
>>> Corporation) router. The firmware crashed five more times since
>>> June. A reliable Wi-Fi connection would be really appreciated.
>>> Could you send me a debug firmware, so the firmware developers
>>> have it easier to fix it?
>>
>> Paul, we are working on getting legal approval on collecting
>> necessary information, such as firmware dump etc, from community.
>> Once done we will share guides to collect them to debug further.
>
> I just wanted to know, if there was a conclusion yet.
>
unfortunately, not yet
>
> Kind regards,
>
> Paul
>
>
> PS: I set debug_mask to 0xffffffff a while back, and it logged so much, that my old boot
> logs are gone from the systemd journal now. ;-)
>
> echo 0xffffffff | sudo tee /sys/module/ath10k_core/parameters/debug_mask
>
> Any hint on what to set, when the crashes happen?
to collect core dump, you need to load ath10k with coredump_mask = 0x7
modprobe ath10k coredump_mask = 0x7
modprobe ath10k_pci
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2025-10-13 1:50 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-12-08 22:21 qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed! Paul Menzel
2025-03-23 11:41 ` Paul Menzel
2025-03-24 3:29 ` Baochen Qiang
2025-03-25 7:01 ` Paul Menzel
2025-05-14 8:08 ` Paul Menzel
[not found] ` <1909038a-bde9-4def-bcb8-0f67bff5c62d@stimulussoft.com>
2025-05-14 8:23 ` Paul Menzel
2025-07-20 8:43 ` Paul Menzel
2025-07-21 3:21 ` Baochen Qiang
2025-10-10 13:12 ` Paul Menzel
2025-10-13 1:49 ` Baochen Qiang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®