mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Paolo Abeni <pabeni@redhat.com>
To: Yuya Kusakabe <yuya.kusakabe@gmail.com>,
	Andrea Mayer <andrea.mayer@uniroma2.it>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Simon Horman <horms@kernel.org>,
	David Ahern <dsahern@kernel.org>,
	Ido Schimmel <idosch@nvidia.com>,
	David Lebrun <david.lebrun@uclouvain.be>,
	Ahmed Abdelsalam <amsalam20@gmail.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net v2] seg6: fix HMAC validation when an extension header precedes the SRH
Date: Thu, 1 Oct 2026 12:58:02 +0200	[thread overview]
Message-ID: <83bba48e-7f0f-44b6-a7ff-b64c3ba96f70@redhat.com> (raw)
In-Reply-To: <20260926-b4-seg6-hmac-transport-header-v2-1-8087b76f6375@gmail.com>

On 9/26/26 13:19, Yuya Kusakabe wrote:
> seg6_hmac_validate_skb() derived the SRH from skb_transport_header().
> That only holds while the two coincide, which is not true on the
> seg6_local input path.
> 
> ip6_rcv_core() leaves the transport header just past the IPv6 header.
> A Hop-by-Hop options header is consumed before the route lookup and
> advances it, but a Destination Options header is not: the seg6_local
> lwtunnel is entered through an input redirect from the route lookup,
> which bypasses the extension header handlers. The transport header
> then still points at the Destination Options header while
> seg6_get_srh() has located the real SRH further down the chain.
> 
> The HMAC is therefore computed over the Destination Options header,
> and a packet carrying a valid HMAC TLV is dropped when
> seg6_require_hmac is set. Such a packet is legitimate: RFC 8200 allows
> Destination Options before a routing header, and get_srh() has walked
> the header chain since commit 5829d70b0b6c ("ipv6: sr: fix get_srh() to
> comply with IPv6 standard "RFC 8200"").
> 
> With a Fragment or an Authentication header in front of the SRH, the
> same mistake also reads past the data pulled by seg6_get_srh(). This
> happens before seg6_require_hmac is read, so the default configuration
> is affected.
> 
> Reproduce by giving a node a seg6local End SID with
> net.ipv6.conf.<dev>.seg6_require_hmac=1 and a key installed with
> "ip sr hmac set <keyid> sha1", then sending
> 
>    IPv6 -> Destination Options -> SRH (carrying a valid HMAC TLV) -> payload
> 
> to that SID: it is dropped, while the same packet without the
> Destination Options header passes.
> 
> Fixes: 5829d70b0b6c ("ipv6: sr: fix get_srh() to comply with IPv6 standard "RFC 8200"")
> Assisted-by: LLM
> Signed-off-by: Yuya Kusakabe <yuya.kusakabe@gmail.com>
FTR applying this to net-next, as it looks really an always broken
corner-case, and Linus is asking for really critical fixes only at
this point of the cycle.

/P


  parent reply	other threads:[~2026-10-01 10:58 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-26 11:19 Yuya Kusakabe
2026-09-29  0:09 ` Andrea Mayer
2026-10-01 10:58 ` Paolo Abeni [this message]
2026-10-01 11:10 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=83bba48e-7f0f-44b6-a7ff-b64c3ba96f70@redhat.com \
    --to=pabeni@redhat.com \
    --cc=amsalam20@gmail.com \
    --cc=andrea.mayer@uniroma2.it \
    --cc=davem@davemloft.net \
    --cc=david.lebrun@uclouvain.be \
    --cc=dsahern@kernel.org \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=idosch@nvidia.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=yuya.kusakabe@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®