* [PATCH v2 0/5] arm64: dts: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G
@ 2026-11-17 9:11 Rui Cao via B4 Relay
2026-11-17 9:11 ` [PATCH v2 1/5] dt-bindings: arm: " Rui Cao via B4 Relay
` (4 more replies)
0 siblings, 5 replies; 8+ messages in thread
From: Rui Cao via B4 Relay @ 2026-11-17 9:11 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Sean Wang, Wim Van Sebroeck,
Guenter Roeck, Greg Kroah-Hartman, Jiri Slaby
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-mediatek,
linux-watchdog, linux-serial, phone-devel, Roman Vivchar,
Rui Cao, Krzysztof Kozlowski
This series adds basic support for MediaTek's MT6833 (Dimensity 700) and
for the Xiaomi Redmi Note 13 5G (gold), which is built on it: the eight
cores with their caches and PMUs, PSCI, the architected timer, the GIC,
the watchdog and the first UART, and on the phone the framebuffer its
bootloader leaves lit and a ramoops region.
With it the phone boots to an initramfs on the framebuffer console, with
all eight cores online, both PMUs registered and the watchdog running;
UART0, which has no connector on gold, passes an internal loopback test.
The pin, clock and power domain controllers, the PMIC wrapper, UFS and
USB are to follow in later series.
Stock LK cannot boot a mainline DT directly, as its DT overlay step
expects vendor nodes. As on other MediaTek phones, this DT relies on
the bootloader (tested with kaeru, an open-source LK payload) to fill
in /memory and copy the firmware carveouts into /reserved-memory from
the FDT prepared by LK.
The watchdog gets a compatible of its own in v2, which the driver
matches in patch 3; the watchdog node in patch 5 needs that patch to
probe.
Signed-off-by: Rui Cao <i@udp0.com>
---
Changes in v2:
- Make mediatek,mt6833-wdt a compatible of its own instead of falling
back to mediatek,mt6589-wdt, whose TOPRGU resets MT6833 doesn't share,
and match it in mtk_wdt.c without reset data (Roman)
- dts: leave the memory size to the bootloader, and keep only ramoops
and the framebuffer in reserved-memory (Roman)
- Collect Roman's Reviewed-by and Krzysztof's Acked-by tags on the arm
and serial bindings
- Drop Krzysztof's Acked-by from the watchdog binding, which changed
- Link to v1: https://patch.msgid.link/20261107-mt6833-base-v1-0-bda21083e9f3@udp0.com
---
Rui Cao (5):
dt-bindings: arm: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G
dt-bindings: watchdog: mediatek,mtk-wdt: Add MT6833
watchdog: mediatek: Add MT6833
dt-bindings: serial: mediatek,uart: Add MT6833
arm64: dts: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G
.../devicetree/bindings/arm/mediatek.yaml | 4 +
.../devicetree/bindings/serial/mediatek,uart.yaml | 1 +
.../bindings/watchdog/mediatek,mtk-wdt.yaml | 1 +
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../arm64/boot/dts/mediatek/mt6833-xiaomi-gold.dts | 57 ++++
arch/arm64/boot/dts/mediatek/mt6833.dtsi | 341 +++++++++++++++++++++
drivers/watchdog/mtk_wdt.c | 1 +
7 files changed, 406 insertions(+)
---
base-commit: d48723711bae9b8cdc56719c448ba42fef28cbee
change-id: 20261107-mt6833-base-5a974a951add
Best regards,
--
Rui Cao <i@udp0.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 1/5] dt-bindings: arm: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G
2026-11-17 9:11 [PATCH v2 0/5] arm64: dts: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G Rui Cao via B4 Relay
@ 2026-11-17 9:11 ` Rui Cao via B4 Relay
2026-11-17 9:11 ` [PATCH v2 2/5] dt-bindings: watchdog: mediatek,mtk-wdt: Add MT6833 Rui Cao via B4 Relay
` (3 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: Rui Cao via B4 Relay @ 2026-11-17 9:11 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Sean Wang, Wim Van Sebroeck,
Guenter Roeck, Greg Kroah-Hartman, Jiri Slaby
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-mediatek,
linux-watchdog, linux-serial, phone-devel, Roman Vivchar,
Rui Cao, Krzysztof Kozlowski
From: Rui Cao <i@udp0.com>
Add MediaTek's MT6833 (Dimensity 700) and the Xiaomi Redmi Note 13 5G,
codenamed gold, which is built on it.
Reviewed-by: Roman Vivchar <rva333@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rui Cao <i@udp0.com>
---
Documentation/devicetree/bindings/arm/mediatek.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 180e6e4948e..900f16b57dc 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -72,6 +72,10 @@ properties:
- archermind,mt6797-x20-dev
- mediatek,mt6797-evb
- const: mediatek,mt6797
+ - items:
+ - enum:
+ - xiaomi,gold
+ - const: mediatek,mt6833
- items:
- enum:
- bananapi,bpi-r64
--
Git-157)
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 2/5] dt-bindings: watchdog: mediatek,mtk-wdt: Add MT6833
2026-11-17 9:11 [PATCH v2 0/5] arm64: dts: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G Rui Cao via B4 Relay
2026-11-17 9:11 ` [PATCH v2 1/5] dt-bindings: arm: " Rui Cao via B4 Relay
@ 2026-11-17 9:11 ` Rui Cao via B4 Relay
2026-11-17 11:15 ` AngeloGioacchino Del Regno
2026-11-17 9:11 ` [PATCH v2 3/5] watchdog: mediatek: " Rui Cao via B4 Relay
` (2 subsequent siblings)
4 siblings, 1 reply; 8+ messages in thread
From: Rui Cao via B4 Relay @ 2026-11-17 9:11 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Sean Wang, Wim Van Sebroeck,
Guenter Roeck, Greg Kroah-Hartman, Jiri Slaby
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-mediatek,
linux-watchdog, linux-serial, phone-devel, Roman Vivchar,
Rui Cao
From: Rui Cao <i@udp0.com>
Add MediaTek's MT6833 (Dimensity 700) as a compatible of its own.
It can't fall back to mediatek,mt6589-wdt, which also describes
MT6589's twelve TOPRGU reset lines: MediaTek's kernel for MT6833 resets
the connectivity CPU through bit 12 of WDT_SWSYSRST, past them, and has
no full reset table for the SoC to take one from.
Signed-off-by: Rui Cao <i@udp0.com>
---
Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml
index f9b725592c2..5742cc09a74 100644
--- a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml
@@ -24,6 +24,7 @@ properties:
- mediatek,mt6589-wdt
- mediatek,mt6735-wdt
- mediatek,mt6795-wdt
+ - mediatek,mt6833-wdt
- mediatek,mt7986-wdt
- mediatek,mt7988-wdt
- mediatek,mt8167-wdt
--
Git-157)
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 3/5] watchdog: mediatek: Add MT6833
2026-11-17 9:11 [PATCH v2 0/5] arm64: dts: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G Rui Cao via B4 Relay
2026-11-17 9:11 ` [PATCH v2 1/5] dt-bindings: arm: " Rui Cao via B4 Relay
2026-11-17 9:11 ` [PATCH v2 2/5] dt-bindings: watchdog: mediatek,mtk-wdt: Add MT6833 Rui Cao via B4 Relay
@ 2026-11-17 9:11 ` Rui Cao via B4 Relay
2026-11-17 11:22 ` AngeloGioacchino Del Regno
2026-11-17 9:11 ` [PATCH v2 4/5] dt-bindings: serial: mediatek,uart: " Rui Cao via B4 Relay
2026-11-17 9:11 ` [PATCH v2 5/5] arm64: dts: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G Rui Cao via B4 Relay
4 siblings, 1 reply; 8+ messages in thread
From: Rui Cao via B4 Relay @ 2026-11-17 9:11 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Sean Wang, Wim Van Sebroeck,
Guenter Roeck, Greg Kroah-Hartman, Jiri Slaby
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-mediatek,
linux-watchdog, linux-serial, phone-devel, Roman Vivchar,
Rui Cao
From: Rui Cao <i@udp0.com>
Match MT6833's watchdog. It works as MT6589's, but its TOPRGU reset
layout isn't known well enough to describe, so it gets no match data
and the driver registers no reset controller for it.
Signed-off-by: Rui Cao <i@udp0.com>
---
drivers/watchdog/mtk_wdt.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index 1630ab65d59..575233c7911 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -595,6 +595,7 @@ static const struct of_device_id mtk_wdt_dt_ids[] = {
{ .compatible = "mediatek,mt6589-wdt", .data = &mt6589_data },
{ .compatible = "mediatek,mt6735-wdt", .data = &mt6735_data },
{ .compatible = "mediatek,mt6795-wdt", .data = &mt6795_data },
+ { .compatible = "mediatek,mt6833-wdt" },
{ .compatible = "mediatek,mt7986-wdt", .data = &mt7986_data },
{ .compatible = "mediatek,mt7988-wdt", .data = &mt7988_data },
{ .compatible = "mediatek,mt8167-wdt", .data = &mt8167_data },
--
Git-157)
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 4/5] dt-bindings: serial: mediatek,uart: Add MT6833
2026-11-17 9:11 [PATCH v2 0/5] arm64: dts: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G Rui Cao via B4 Relay
` (2 preceding siblings ...)
2026-11-17 9:11 ` [PATCH v2 3/5] watchdog: mediatek: " Rui Cao via B4 Relay
@ 2026-11-17 9:11 ` Rui Cao via B4 Relay
2026-11-17 9:11 ` [PATCH v2 5/5] arm64: dts: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G Rui Cao via B4 Relay
4 siblings, 0 replies; 8+ messages in thread
From: Rui Cao via B4 Relay @ 2026-11-17 9:11 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Sean Wang, Wim Van Sebroeck,
Guenter Roeck, Greg Kroah-Hartman, Jiri Slaby
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-mediatek,
linux-watchdog, linux-serial, phone-devel, Roman Vivchar,
Rui Cao, Krzysztof Kozlowski
From: Rui Cao <i@udp0.com>
Add MediaTek's MT6833 (Dimensity 700). Its UARTs are MT6577-compatible:
MediaTek's MT6833 device tree gives them "mediatek,mt6577-uart" alone.
Reviewed-by: Roman Vivchar <rva333@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rui Cao <i@udp0.com>
---
Documentation/devicetree/bindings/serial/mediatek,uart.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
index 5bd8a8853ae..8fb793c3408 100644
--- a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
@@ -34,6 +34,7 @@ properties:
- mediatek,mt6779-uart
- mediatek,mt6795-uart
- mediatek,mt6797-uart
+ - mediatek,mt6833-uart
- mediatek,mt6893-uart
- mediatek,mt7622-uart
- mediatek,mt7623-uart
--
Git-157)
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 5/5] arm64: dts: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G
2026-11-17 9:11 [PATCH v2 0/5] arm64: dts: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G Rui Cao via B4 Relay
` (3 preceding siblings ...)
2026-11-17 9:11 ` [PATCH v2 4/5] dt-bindings: serial: mediatek,uart: " Rui Cao via B4 Relay
@ 2026-11-17 9:11 ` Rui Cao via B4 Relay
4 siblings, 0 replies; 8+ messages in thread
From: Rui Cao via B4 Relay @ 2026-11-17 9:11 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Sean Wang, Wim Van Sebroeck,
Guenter Roeck, Greg Kroah-Hartman, Jiri Slaby
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-mediatek,
linux-watchdog, linux-serial, phone-devel, Roman Vivchar,
Rui Cao
From: Rui Cao <i@udp0.com>
Add a device tree for MediaTek's MT6833 (Dimensity 700): its eight
cores, six Cortex-A55 and two Cortex-A76 in one DynamIQ cluster, with
their caches and PMUs, PSCI, the architected timer, the GICv3, the
watchdog and the first UART.
Add the Xiaomi Redmi Note 13 5G (gold) on it, with the framebuffer the
bootloader leaves the panel scanning out and a ramoops region. The
memory size and the regions reserved for the firmware the bootloader
starts depend on the RAM variant, so they are left to the bootloader:
the memory node has no size, and reserved-memory holds only the regions
the kernel uses itself.
The cache sizes are the ones the cores report in CCSIDR_EL1. The
bootloader programs CNTFRQ_EL0 (13 MHz), so the timer has no
clock-frequency.
Signed-off-by: Rui Cao <i@udp0.com>
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../arm64/boot/dts/mediatek/mt6833-xiaomi-gold.dts | 57 ++++
arch/arm64/boot/dts/mediatek/mt6833.dtsi | 341 +++++++++++++++++++++
3 files changed, 399 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index a86fb313b1a..b8466d4a3d6 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-sony-xperia-m5.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6833-xiaomi-gold.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-cudy-wr3000-v1.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt6833-xiaomi-gold.dts b/arch/arm64/boot/dts/mediatek/mt6833-xiaomi-gold.dts
new file mode 100644
index 00000000000..bf5340617e6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6833-xiaomi-gold.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Xiaomi Redmi Note 13 5G (gold)
+ *
+ * Copyright (C) 2026 Rui Cao <i@udp0.com>
+ */
+
+/dts-v1/;
+#include "mt6833.dtsi"
+
+/ {
+ model = "Xiaomi Redmi Note 13 5G";
+ compatible = "xiaomi,gold", "mediatek,mt6833";
+ chassis-type = "handset";
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* The bootloader leaves the panel lit, scanning out this buffer */
+ framebuffer@73c10000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x73c10000 0 (4352 * 2400)>;
+ width = <1080>;
+ height = <2400>;
+ stride = <4352>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ /* The bootloader fills in the size */
+ reg = <0 0x40000000 0 0>;
+ };
+
+ /* The bootloader adds the regions it reserves for firmware */
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ramoops@48090000 {
+ compatible = "ramoops";
+ reg = <0 0x48090000 0 0xe0000>;
+ console-size = <0x40000>;
+ pmsg-size = <0x80000>;
+ no-map;
+ };
+
+ framebuffer@73c10000 {
+ reg = <0 0x73c10000 0 0x1df0000>;
+ no-map;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6833.dtsi b/arch/arm64/boot/dts/mediatek/mt6833.dtsi
new file mode 100644
index 00000000000..51bcdad846e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6833.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * MediaTek MT6833 (Dimensity 700)
+ *
+ * Copyright (C) 2026 Rui Cao <i@udp0.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "mediatek,mt6833";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clk26m: oscillator-26m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x000>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <405>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_0>;
+
+ l2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <131072>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <405>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_1>;
+
+ l2_1: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <131072>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x200>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <405>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_2>;
+
+ l2_2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <131072>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x300>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <405>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_3>;
+
+ l2_3: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <131072>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x400>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <405>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_4>;
+
+ l2_4: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <131072>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x500>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <405>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_5>;
+
+ l2_5: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <131072>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x600>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ i-cache-size = <65536>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <65536>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_6>;
+
+ l2_6: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <262144>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x700>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ i-cache-size = <65536>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <65536>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_7>;
+
+ l2_7: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <262144>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+
+ core4 {
+ cpu = <&cpu4>;
+ };
+
+ core5 {
+ cpu = <&cpu5>;
+ };
+
+ core6 {
+ cpu = <&cpu6>;
+ };
+
+ core7 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ l3_0: l3-cache {
+ compatible = "cache";
+ cache-level = <3>;
+ cache-unified;
+ cache-size = <1048576>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ };
+ };
+
+ pmu-a55 {
+ compatible = "arm,cortex-a55-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+ };
+
+ pmu-a76 {
+ compatible = "arm,cortex-a76-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer: timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ reg = <0 0x0c000000 0 0x40000>,
+ <0 0x0c040000 0 0x200000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ #redistributor-regions = <1>;
+
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+ };
+
+ ppi_cluster1: interrupt-partition-1 {
+ affinity = <&cpu6 &cpu7>;
+ };
+ };
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt6833-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt6833-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x1000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+ };
+};
--
Git-157)
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/5] dt-bindings: watchdog: mediatek,mtk-wdt: Add MT6833
2026-11-17 9:11 ` [PATCH v2 2/5] dt-bindings: watchdog: mediatek,mtk-wdt: Add MT6833 Rui Cao via B4 Relay
@ 2026-11-17 11:15 ` AngeloGioacchino Del Regno
0 siblings, 0 replies; 8+ messages in thread
From: AngeloGioacchino Del Regno @ 2026-11-17 11:15 UTC (permalink / raw)
To: i, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Matthias Brugger, Sean Wang, Wim Van Sebroeck, Guenter Roeck,
Greg Kroah-Hartman, Jiri Slaby
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-mediatek,
linux-watchdog, linux-serial, phone-devel, Roman Vivchar
On 11/17/26 10:11, Rui Cao via B4 Relay wrote:
> From: Rui Cao <i@udp0.com>
>
> Add MediaTek's MT6833 (Dimensity 700) as a compatible of its own.
>
> It can't fall back to mediatek,mt6589-wdt, which also describes
> MT6589's twelve TOPRGU reset lines: MediaTek's kernel for MT6833 resets
> the connectivity CPU through bit 12 of WDT_SWSYSRST, past them, and has
> no full reset table for the SoC to take one from.
>
> Signed-off-by: Rui Cao <i@udp0.com>
Reviewed-by: AngeloGioacchino Del Regtno <angelogioacchino.delregno@collabora.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 3/5] watchdog: mediatek: Add MT6833
2026-11-17 9:11 ` [PATCH v2 3/5] watchdog: mediatek: " Rui Cao via B4 Relay
@ 2026-11-17 11:22 ` AngeloGioacchino Del Regno
0 siblings, 0 replies; 8+ messages in thread
From: AngeloGioacchino Del Regno @ 2026-11-17 11:22 UTC (permalink / raw)
To: i, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Matthias Brugger, Sean Wang, Wim Van Sebroeck, Guenter Roeck,
Greg Kroah-Hartman, Jiri Slaby
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-mediatek,
linux-watchdog, linux-serial, phone-devel, Roman Vivchar
On 11/17/26 10:11, Rui Cao via B4 Relay wrote:
> From: Rui Cao <i@udp0.com>
>
> Match MT6833's watchdog. It works as MT6589's, but its TOPRGU reset
> layout isn't known well enough to describe, so it gets no match data
> and the driver registers no reset controller for it.
>
> Signed-off-by: Rui Cao <i@udp0.com>
Hopefully we can get the TOPRGU reset controller layout somehow somewhere, because
it's a pity not to have it... though, I think that the only reset that would be
actually needed is the CONN one (for the modem) and nothing else.
So
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2026-11-17 11:22 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-17 9:11 [PATCH v2 0/5] arm64: dts: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G Rui Cao via B4 Relay
2026-11-17 9:11 ` [PATCH v2 1/5] dt-bindings: arm: " Rui Cao via B4 Relay
2026-11-17 9:11 ` [PATCH v2 2/5] dt-bindings: watchdog: mediatek,mtk-wdt: Add MT6833 Rui Cao via B4 Relay
2026-11-17 11:15 ` AngeloGioacchino Del Regno
2026-11-17 9:11 ` [PATCH v2 3/5] watchdog: mediatek: " Rui Cao via B4 Relay
2026-11-17 11:22 ` AngeloGioacchino Del Regno
2026-11-17 9:11 ` [PATCH v2 4/5] dt-bindings: serial: mediatek,uart: " Rui Cao via B4 Relay
2026-11-17 9:11 ` [PATCH v2 5/5] arm64: dts: mediatek: Add MT6833 and the Xiaomi Redmi Note 13 5G Rui Cao via B4 Relay
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®