[v1,0/3] Add mt8186 dsi compatoble & Move the getting bridge node function

[v1,0/3] Add mt8186 dsi compatoble & Move the getting bridge node function

[xinlei.lee]

From: xinlei lee <xinlei.lee@mediatek.com>

The modification is based on avoiding screen shift:
https://patchwork.kernel.org/project/linux-mediatek/cover/20220114092110.12137-1-rex-bc.chen@mediatek.com/

xinlei lee (3):
  dt-bindings: display: mediatek: dsi: add documentation for MT8186 SoC
  drm/mediatek: Add mt8186 dsi compatible to mtk_dsi.c
  drm/mediatek: Move the getting bridge node function to mtk_dsi_bind

 .../bindings/display/mediatek/mediatek,dsi.txt     |  2 +-
 drivers/gpu/drm/mediatek/mtk_dsi.c                 | 37 ++++++++++++++--------
 2 files changed, 24 insertions(+), 15 deletions(-)

-- 
2.6.4

[v1,1/3] dt-bindings: display: mediatek: dsi: add documentation for MT8186 SoC

[xinlei.lee]

From: xinlei lee <xinlei.lee@mediatek.com>

Add binding documentation for the MT8186 SoC.

Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
---
 Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index 36b0145..c82b8b2 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -7,7 +7,7 @@ channel output.
 
 Required properties:
 - compatible: "mediatek,<chip>-dsi"
-- the supported chips are mt2701, mt7623, mt8167, mt8173 and mt8183.
+- the supported chips are mt2701, mt7623, mt8167, mt8173, mt8183 and mt8186.
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks
-- 
2.6.4

[v1,2/3] drm/mediatek: Add mt8186 dsi compatible to mtk_dsi.c

[xinlei.lee]

From: xinlei lee <xinlei.lee@mediatek.com>

Add the compatible of mt8186-dsi because we use different cmdq addresses in mt8186.

Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index e91b3ff..62af60d 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -1151,6 +1151,12 @@ static const struct mtk_dsi_driver_data mt8183_dsi_driver_data = {
 	.has_size_ctl = true,
 };
 
+static const struct mtk_dsi_driver_data mt8186_dsi_driver_data = {
+	.reg_cmdq_off = 0xd00,
+	.has_shadow_ctl = true,
+	.has_size_ctl = true,
+};
+
 static const struct of_device_id mtk_dsi_of_match[] = {
 	{ .compatible = "mediatek,mt2701-dsi",
 	  .data = &mt2701_dsi_driver_data },
@@ -1158,6 +1164,8 @@ static const struct of_device_id mtk_dsi_of_match[] = {
 	  .data = &mt8173_dsi_driver_data },
 	{ .compatible = "mediatek,mt8183-dsi",
 	  .data = &mt8183_dsi_driver_data },
+	{ .compatible = "mediatek,mt8186-dsi",
+	  .data = &mt8186_dsi_driver_data },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, mtk_dsi_of_match);
-- 
2.6.4

[v1,3/3] drm/mediatek: Move the getting bridge node function to mtk_dsi_bind

[xinlei.lee]

From: xinlei lee <xinlei.lee@mediatek.com>

The order of probe function for bridge drivers and dsi drivers is uncertain.
To avoid the dsi probe cannot be executed, we place getting bridge node function in
mtk_dsi_bind.

Signed-off-by:Xinlei Lee <xinlei.lee@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 62af60d..a390f26 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -991,6 +991,21 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
 	int ret;
 	struct drm_device *drm = data;
 	struct mtk_dsi *dsi = dev_get_drvdata(dev);
+	struct drm_panel *panel;
+
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
+					  &panel, &dsi->next_bridge);
+	if (ret)
+		return ret;
+
+	if (panel) {
+		dsi->next_bridge = devm_drm_panel_bridge_add(dev, panel);
+		if (IS_ERR(dsi->next_bridge)) {
+			ret = PTR_ERR(dsi->next_bridge);
+			dev_err(dev, "failed to add bridge: %d\n", ret);
+			return ret;
+		}
+	}
 
 	ret = mtk_dsi_encoder_init(drm, dsi);
 	if (ret)
@@ -1016,7 +1031,6 @@ static int mtk_dsi_probe(struct platform_device *pdev)
 {
 	struct mtk_dsi *dsi;
 	struct device *dev = &pdev->dev;
-	struct drm_panel *panel;
 	struct resource *regs;
 	int irq_num;
 	int ret;
@@ -1033,19 +1047,6 @@ static int mtk_dsi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
-					  &panel, &dsi->next_bridge);
-	if (ret)
-		goto err_unregister_host;
-
-	if (panel) {
-		dsi->next_bridge = devm_drm_panel_bridge_add(dev, panel);
-		if (IS_ERR(dsi->next_bridge)) {
-			ret = PTR_ERR(dsi->next_bridge);
-			goto err_unregister_host;
-		}
-	}
-
 	dsi->driver_data = of_device_get_match_data(dev);
 
 	dsi->engine_clk = devm_clk_get(dev, "engine");
-- 
2.6.4

Re: [v1, 3/3] drm/mediatek: Move the getting bridge node function to mtk_dsi_bind

[CK Hu]

Hi, Xinlei:

On Thu, 2022-01-27 at 19:42 +0800, xinlei.lee@mediatek.com wrote:
> From: xinlei lee <xinlei.lee@mediatek.com>
> 
> The order of probe function for bridge drivers and dsi drivers is
> uncertain.
> To avoid the dsi probe cannot be executed, we place getting bridge
> node function in
> mtk_dsi_bind.

It seems this patch want to fix the same problem as [1]. Does [1] fix
your problem? If so, let's ignore this patch.

[1] 
https://patchwork.kernel.org/project/linux-mediatek/patch/20220127143623.123025-1-angelogioacchino.delregno@collabora.com/

Regards,
CK

> 
> Signed-off-by:Xinlei Lee <xinlei.lee@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 29 +++++++++++++++-------------
> -
>  1 file changed, 15 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c
> b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 62af60d..a390f26 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -991,6 +991,21 @@ static int mtk_dsi_bind(struct device *dev,
> struct device *master, void *data)
>  	int ret;
>  	struct drm_device *drm = data;
>  	struct mtk_dsi *dsi = dev_get_drvdata(dev);
> +	struct drm_panel *panel;
> +
> +	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> +					  &panel, &dsi->next_bridge);
> +	if (ret)
> +		return ret;
> +
> +	if (panel) {
> +		dsi->next_bridge = devm_drm_panel_bridge_add(dev,
> panel);
> +		if (IS_ERR(dsi->next_bridge)) {
> +			ret = PTR_ERR(dsi->next_bridge);
> +			dev_err(dev, "failed to add bridge: %d\n",
> ret);
> +			return ret;
> +		}
> +	}
>  
>  	ret = mtk_dsi_encoder_init(drm, dsi);
>  	if (ret)
> @@ -1016,7 +1031,6 @@ static int mtk_dsi_probe(struct platform_device
> *pdev)
>  {
>  	struct mtk_dsi *dsi;
>  	struct device *dev = &pdev->dev;
> -	struct drm_panel *panel;
>  	struct resource *regs;
>  	int irq_num;
>  	int ret;
> @@ -1033,19 +1047,6 @@ static int mtk_dsi_probe(struct
> platform_device *pdev)
>  		return ret;
>  	}
>  
> -	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> -					  &panel, &dsi->next_bridge);
> -	if (ret)
> -		goto err_unregister_host;
> -
> -	if (panel) {
> -		dsi->next_bridge = devm_drm_panel_bridge_add(dev,
> panel);
> -		if (IS_ERR(dsi->next_bridge)) {
> -			ret = PTR_ERR(dsi->next_bridge);
> -			goto err_unregister_host;
> -		}
> -	}
> -
>  	dsi->driver_data = of_device_get_match_data(dev);
>  
>  	dsi->engine_clk = devm_clk_get(dev, "engine");

Re: [v1, 1/3] dt-bindings: display: mediatek: dsi: add documentation for MT8186 SoC

[CK Hu]

Hi, Xinlei:

On Thu, 2022-01-27 at 19:42 +0800, xinlei.lee@mediatek.com wrote:
> From: xinlei lee <xinlei.lee@mediatek.com>
> 
> Add binding documentation for the MT8186 SoC.

DPI has a yaml format document, so I would like DSI also has a yaml
format document.
Please send a patch to transfer DSI document to yaml, and then apply
this patch to yaml document.

Regards,
CK

> 
> Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
> ---
>  Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git
> a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index 36b0145..c82b8b2 100644
> ---
> a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++
> b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -7,7 +7,7 @@ channel output.
>  
>  Required properties:
>  - compatible: "mediatek,<chip>-dsi"
> -- the supported chips are mt2701, mt7623, mt8167, mt8173 and mt8183.
> +- the supported chips are mt2701, mt7623, mt8167, mt8173, mt8183 and
> mt8186.
>  - reg: Physical base address and length of the controller's
> registers
>  - interrupts: The interrupt signal from the function block.
>  - clocks: device clocks

Re: [v1,2/3] drm/mediatek: Add mt8186 dsi compatible to mtk_dsi.c

[CK Hu]

Hi, Xinlei:

On Thu, 2022-01-27 at 19:42 +0800, xinlei.lee@mediatek.com wrote:
> From: xinlei lee <xinlei.lee@mediatek.com>
> 
> Add the compatible of mt8186-dsi because we use different cmdq
> addresses in mt8186.

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> 
> Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c
> b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index e91b3ff..62af60d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -1151,6 +1151,12 @@ static const struct mtk_dsi_driver_data
> mt8183_dsi_driver_data = {
>  	.has_size_ctl = true,
>  };
>  
> +static const struct mtk_dsi_driver_data mt8186_dsi_driver_data = {
> +	.reg_cmdq_off = 0xd00,
> +	.has_shadow_ctl = true,
> +	.has_size_ctl = true,
> +};
> +
>  static const struct of_device_id mtk_dsi_of_match[] = {
>  	{ .compatible = "mediatek,mt2701-dsi",
>  	  .data = &mt2701_dsi_driver_data },
> @@ -1158,6 +1164,8 @@ static const struct of_device_id
> mtk_dsi_of_match[] = {
>  	  .data = &mt8173_dsi_driver_data },
>  	{ .compatible = "mediatek,mt8183-dsi",
>  	  .data = &mt8183_dsi_driver_data },
> +	{ .compatible = "mediatek,mt8186-dsi",
> +	  .data = &mt8186_dsi_driver_data },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, mtk_dsi_of_match);

答复: [v1, 3/3] drm/mediatek: Move the getting bridge node function to mtk_dsi_bind

[Xinlei Lee (李昕磊)]

Hi, CK:

	As you describe, these two patches modify the same thing, let's ignore this patch.
	Thanks for your suggestion.

Best Regards,
xinlei

-----邮件原件-----
发件人: CK Hu [mailto:ck.hu@mediatek.com] 
发送时间: 2022年1月28日 13:04
收件人: Xinlei Lee (李昕磊); chunkuang.hu@kernel.org; p.zabel@pengutronix.de; airlied@linux.ie; daniel@ffwll.ch; matthias.bgg@gmail.com
抄送: dri-devel@lists.freedesktop.org; linux-mediatek@lists.infradead.org; linux-arm-kernel@lists.infradead.org; srv_heupstream; linux-kernel@vger.kernel.org; Jitao Shi (石记涛)
主题: Re: [v1, 3/3] drm/mediatek: Move the getting bridge node function to mtk_dsi_bind

Hi, Xinlei:

On Thu, 2022-01-27 at 19:42 +0800, xinlei.lee@mediatek.com wrote:
> From: xinlei lee <xinlei.lee@mediatek.com>
> 
> The order of probe function for bridge drivers and dsi drivers is 
> uncertain.
> To avoid the dsi probe cannot be executed, we place getting bridge 
> node function in mtk_dsi_bind.

It seems this patch want to fix the same problem as [1]. Does [1] fix your problem? If so, let's ignore this patch.

[1]
https://patchwork.kernel.org/project/linux-mediatek/patch/20220127143623.123025-1-angelogioacchino.delregno@collabora.com/

Regards,
CK

> 
> Signed-off-by:Xinlei Lee <xinlei.lee@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 29 +++++++++++++++-------------
> -
>  1 file changed, 15 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c
> b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 62af60d..a390f26 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -991,6 +991,21 @@ static int mtk_dsi_bind(struct device *dev, 
> struct device *master, void *data)
>  	int ret;
>  	struct drm_device *drm = data;
>  	struct mtk_dsi *dsi = dev_get_drvdata(dev);
> +	struct drm_panel *panel;
> +
> +	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> +					  &panel, &dsi->next_bridge);
> +	if (ret)
> +		return ret;
> +
> +	if (panel) {
> +		dsi->next_bridge = devm_drm_panel_bridge_add(dev,
> panel);
> +		if (IS_ERR(dsi->next_bridge)) {
> +			ret = PTR_ERR(dsi->next_bridge);
> +			dev_err(dev, "failed to add bridge: %d\n",
> ret);
> +			return ret;
> +		}
> +	}
>  
>  	ret = mtk_dsi_encoder_init(drm, dsi);
>  	if (ret)
> @@ -1016,7 +1031,6 @@ static int mtk_dsi_probe(struct platform_device
> *pdev)
>  {
>  	struct mtk_dsi *dsi;
>  	struct device *dev = &pdev->dev;
> -	struct drm_panel *panel;
>  	struct resource *regs;
>  	int irq_num;
>  	int ret;
> @@ -1033,19 +1047,6 @@ static int mtk_dsi_probe(struct platform_device 
> *pdev)
>  		return ret;
>  	}
>  
> -	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> -					  &panel, &dsi->next_bridge);
> -	if (ret)
> -		goto err_unregister_host;
> -
> -	if (panel) {
> -		dsi->next_bridge = devm_drm_panel_bridge_add(dev,
> panel);
> -		if (IS_ERR(dsi->next_bridge)) {
> -			ret = PTR_ERR(dsi->next_bridge);
> -			goto err_unregister_host;
> -		}
> -	}
> -
>  	dsi->driver_data = of_device_get_match_data(dev);
>  
>  	dsi->engine_clk = devm_clk_get(dev, "engine");