Driver needed/broken? "U.S. Robotics Sportster 33600 FAX/Voice Int"

Driver needed/broken? "U.S. Robotics Sportster 33600 FAX/Voice Int"

[Ignacio Santolin]

I Using an old modem (U.S. Robotics Sportster 33600 FAX/Voice Int)
***NOT WINMODEM***

Kernel succesfly detects the card (not as modem) and isnt creates the
/dev/modem (driver develop needed?), Just works sending commands to
/dev/ttyS1
NOTE: the modem is not present in any hardware manager or lspci

I TEST THE MODEM VIA THE WVDIALCONF AND THE MODEM ANSWER THE AT
COMMANDS BUT SENDING COMMANDS TO /dev/ttyS1 *not* to /dev/modem

DMESG OUTPUT (CARD DETECTED)
================================

ignacio@airwave:~$ dmesg
[    0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC
2008 (Ubuntu 2.6.24-16.30-generic)
...
...
[   23.463231] isapnp: Scanning for PnP cards...
[   23.561750] isapnp: Card 'U.S. Robotics Sportster 33600 FAX/Voice Int'
[   23.561757] isapnp: 1 Plug & Play card detected total
[   23.674804] Real Time Clock Driver v1.12ac

-----------------------------------------------------------------------------------------

LSPCI OUTPUT (MODEM IS NOT PRESENT)
================================
ignacio@airwave:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
00:0a.1 Input device controller: Creative Labs SB Live! Game Port (rev 08)
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4
MX 440 AGP 8x] (rev c1)

------------------------------------------------------------------------------------------

ignacio@airwave:~$ sudo wvdialconf
[sudo] password for ignacio:
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0
ttyS1<*1>: ATQ0 V1 E1 -- OK
ttyS1<*1>: ATQ0 V1 E1 Z -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS1<*1>: Modem Identifier: ATI -- 3361
ttyS1<*1>: Speed 4800: AT -- OK
ttyS1<*1>: Speed 9600: AT -- OK
ttyS1<*1>: Speed 19200: AT -- OK
ttyS1<*1>: Speed 38400: AT -- OK
ttyS1<*1>: Speed 57600: AT -- OK
ttyS1<*1>: Speed 115200: AT -- OK
ttyS1<*1>: Max speed is 115200; that should be safe.
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Modem Port Scan<*1>: S3

Found a modem on /dev/ttyS1.
Modem configuration written to /etc/wvdial.conf.
ttyS1<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ignacio@airwave:~$

AND FINALLY THE MODEM DIALS AND WORKS (not as /dev/modem)
========================================================
ignacio@airwave:~$ wvdial
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT02293422118
--> Waiting for carrier.
ATDT02293422118
DIALING
--> Dial Successfly.
--> Disconnecting at Mon Aug 18 23:26:38 2008

================================================================

I ATTACH MY SYSTEM INFO

ignacio@airwave:~$ cat /proc/version
Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3
(Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008

ignacio@airwave:~$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model  : 7
model name : AMD Duron(tm) processor
stepping : 1
cpu MHz  : 1200.106
cache size : 64 KB
fdiv_bug : no
hlt_bug  : no
f00f_bug : no
coma_bug : no
fpu  : yes
fpu_exception : yes
cpuid level : 1
wp  : yes
flags  : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat
pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow up ts
bogomips : 2402.68
clflush size : 32

ignacio@airwave:~$ cat /proc/modules
nls_iso8859_1 4992 1 - Live 0xd4cf1000
nls_cp437 6656 1 - Live 0xd4cde000
vfat 14464 1 - Live 0xd4d17000
fat 54556 1 vfat, Live 0xd4e6b000
isofs 36388 1 - Live 0xd4d8b000
udf 88612 0 - Live 0xd4e54000
binfmt_misc 12808 1 - Live 0xd4ccd000
rfcomm 41744 2 - Live 0xd4cff000
l2cap 25728 13 rfcomm, Live 0xd4cd6000
bluetooth 61156 4 rfcomm,l2cap, Live 0xd4ce1000
ipv6 267780 12 - Live 0xd4d1c000
ppdev 10372 0 - Live 0xd4cc9000
cpufreq_userspace 5284 0 - Live 0xd4cc6000
cpufreq_conservative 8712 0 - Live 0xd4cc2000
cpufreq_stats 7104 0 - Live 0xd4cb5000
cpufreq_ondemand 9740 0 - Live 0xd4c8d000
freq_table 5536 2 cpufreq_stats,cpufreq_ondemand, Live 0xd4cb2000
cpufreq_powersave 2688 0 - Live 0xd4bc0000
container 5632 0 - Live 0xd4c94000
sbs 15112 0 - Live 0xd4cb8000
sbshc 7680 1 sbs, Live 0xd4c91000
dock 11280 0 - Live 0xd4aa2000
video 19856 0 - Live 0xd4cac000
output 4736 1 video, Live 0xd4c7f000
battery 14212 0 - Live 0xd4ca7000
af_packet 23812 0 - Live 0xd4ca0000
ppp_generic 29588 0 - Live 0xd4c97000
slhc 7040 1 ppp_generic, Live 0xd4c7c000
iptable_filter 3840 0 - Live 0xd4865000
ip_tables 14820 1 iptable_filter, Live 0xd4c88000
x_tables 16132 1 ip_tables, Live 0xd4c83000
ac 6916 0 - Live 0xd4c04000
lp 12324 0 - Live 0xd4c09000
snd_emu10k1_synth 8064 0 - Live 0xd4bbd000
snd_emux_synth 36224 1 snd_emu10k1_synth, Live 0xd4b49000
snd_seq_virmidi 8192 1 snd_emux_synth, Live 0xd4aa6000
snd_seq_midi_emul 7552 1 snd_emux_synth, Live 0xd4854000
snd_emu10k1 146880 4 snd_emu10k1_synth, Live 0xd4b54000
snd_ac97_codec 101028 1 snd_emu10k1, Live 0xd4b0e000
ac97_bus 3072 1 snd_ac97_codec, Live 0xd49eb000
snd_pcm_oss 42144 0 - Live 0xd4ae1000
snd_mixer_oss 17920 1 snd_pcm_oss, Live 0xd4ab4000
snd_pcm 78596 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss, Live 0xd4acc000
snd_page_alloc 11400 2 snd_emu10k1,snd_pcm, Live 0xd4a76000
snd_util_mem 5632 2 snd_emux_synth,snd_emu10k1, Live 0xd498c000
snd_hwdep 10500 2 snd_emux_synth,snd_emu10k1, Live 0xd49c8000
snd_seq_dummy 4868 0 - Live 0xd4a1d000
evdev 13056 4 - Live 0xd4a9d000
nvidia 4718832 32 - Live 0xd5086000 (P)
serio_raw 7940 0 - Live 0xd4902000
snd_seq_oss 35584 0 - Live 0xd4aaa000
snd_seq_midi 9376 0 - Live 0xd4a54000
snd_rawmidi 25760 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi, Live 0xd4a7a000
psmouse 40336 0 - Live 0xd4a92000
snd_seq_midi_event 8320 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi,
Live 0xd4a50000
snd_seq 54224 9
snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event,
Live 0xd4a83000
pcspkr 4224 0 - Live 0xd48e6000
snd_timer 24836 3 snd_emu10k1,snd_pcm,snd_seq, Live 0xd4a69000
snd_seq_device 9612 8
snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq,
Live 0xd4a4c000
button 9232 0 - Live 0xd4a48000
snd 56996 20 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device,
Live 0xd4a5a000
via686a 15244 0 - Live 0xd4a43000
emu10k1_gp 4608 0 - Live 0xd4878000
soundcore 8800 1 snd, Live 0xd4a19000
i2c_viapro 9876 0 - Live 0xd49e7000
gameport 16008 2 emu10k1_gp, Live 0xd49cc000
i2c_core 24832 2 nvidia,i2c_viapro, Live 0xd4a3b000
shpchp 34452 0 - Live 0xd4a31000
pci_hotplug 30880 1 shpchp, Live 0xd4a10000
parport_pc 36260 0 - Live 0xd49dd000
parport 37832 3 ppdev,lp,parport_pc, Live 0xd49d2000
via_agp 11136 1 - Live 0xd4988000
agpgart 34760 2 nvidia,via_agp, Live 0xd498f000
ext3 136712 1 - Live 0xd49ed000
jbd 48404 1 ext3, Live 0xd49b8000
mbcache 9600 1 ext3, Live 0xd48a2000
sg 36880 0 - Live 0xd49ad000
usb_storage 73664 1 - Live 0xd499a000
libusual 19108 1 usb_storage, Live 0xd48d9000
sr_mod 17956 1 - Live 0xd48e0000
cdrom 37408 1 sr_mod, Live 0xd4978000
sd_mod 30720 5 - Live 0xd48f9000
ata_generic 8324 0 - Live 0xd48d5000
pata_acpi 8320 0 - Live 0xd48a6000
floppy 59588 0 - Live 0xd48e9000
uhci_hcd 27024 0 - Live 0xd48ab000
pata_via 13316 3 - Live 0xd4891000
ne2k_pci 11744 0 - Live 0xd4896000
8390 11776 1 ne2k_pci, Live 0xd4867000
usbcore 146028 4 usb_storage,libusual,uhci_hcd, Live 0xd4953000
libata 159344 3 ata_generic,pata_acpi,pata_via, Live 0xd492b000
scsi_mod 151436 5 sg,usb_storage,sr_mod,sd_mod,libata, Live 0xd4905000
raid10 25728 0 - Live 0xd489a000
raid456 129040 0 - Live 0xd48b4000
async_xor 4992 1 raid456, Live 0xd4862000
async_memcpy 3712 1 raid456, Live 0xd483c000
async_tx 9292 3 raid456,async_xor,async_memcpy, Live 0xd4819000
xor 16136 2 raid456,async_xor, Live 0xd4873000
raid1 25728 0 - Live 0xd486b000
raid0 9344 0 - Live 0xd4850000
multipath 9600 0 - Live 0xd4838000
linear 7296 0 - Live 0xd4835000
md_mod 82068 6 raid10,raid456,raid1,raid0,multipath,linear, Live 0xd487b000
thermal 16796 0 - Live 0xd484a000
processor 36872 2 thermal, Live 0xd4857000
fan 5636 0 - Live 0xd4832000
fbcon 42912 0 - Live 0xd483e000
tileblit 3456 1 fbcon, Live 0xd4821000
font 9472 1 fbcon, Live 0xd481d000
bitblit 6784 1 fbcon, Live 0xd4814000
softcursor 3072 1 bitblit, Live 0xd4817000
fuse 50580 3 - Live 0xd4824000

ignacio@airwave:~$ cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:07.1
  0170-0177 : libata
01f0-01f7 : 0000:00:07.1
  01f0-01f7 : libata
0213-0213 : ISAPnP
02f8-02ff : serial
0376-0376 : 0000:00:07.1
  0376-0376 : libata
03c0-03df : vga+
03f2-03f5 : floppy
03f6-03f6 : 0000:00:07.1
  03f6-03f6 : libata
03f7-03f7 : floppy DIR
04d0-04d1 : pnp 00:02
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
4000-4003 : ACPI PM1a_EVT_BLK
4008-400b : ACPI PM_TMR
4010-4015 : ACPI CPU throttle
4020-4023 : ACPI GPE0_BLK
40f0-40f1 : ACPI PM1a_CNT_BLK
5000-500f : 0000:00:07.4
  5000-5007 : vt596_smbus
6000-607f : via686a
  6000-607f : 0000:00:07.4
    6000-607f : via686a
d000-d00f : 0000:00:07.1
  d000-d00f : libata
d400-d41f : 0000:00:07.2
  d400-d41f : uhci_hcd
d800-d81f : 0000:00:07.3
  d800-d81f : uhci_hcd
dc00-dc1f : 0000:00:0a.0
  dc00-dc1f : EMU10K1
e000-e007 : 0000:00:0a.1
  e000-e007 : emu10k1-gp
e400-e41f : 0000:00:0c.0
  e400-e41f : ne2k-pci

ignacio@airwave:~$ cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cf7ff : Video ROM
000f0000-000fffff : System ROM
00100000-13feffff : System RAM
  00100000-0031b5a3 : Kernel code
  0031b5a4-00414dc3 : Kernel data
  00476000-004eba7f : Kernel bss
13ff0000-13ff2fff : ACPI Non-volatile Storage
13ff3000-13ffffff : ACPI Tables
e0000000-e7ffffff : PCI Bus #01
  e0000000-e7ffffff : 0000:01:00.0
e8000000-ebffffff : 0000:00:00.0
ec000000-edffffff : PCI Bus #01
  ec000000-ecffffff : 0000:01:00.0
    ec000000-ecffffff : nvidia
  ed000000-ed01ffff : 0000:01:00.0
fee00000-fee00fff : pnp 00:00
ffff0000-ffffffff : reserved

ignacio@airwave:~$ sudo lspci -vvv
[sudo] password for ignacio:
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
 Latency: 8
 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
 Capabilities: [a0] AGP version 2.0
  Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
  Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
 Capabilities: [c0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133
AGP] (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
 Latency: 0
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 0000f000-00000fff
 Memory behind bridge: ec000000-edffffff
 Prefetchable memory behind bridge: e0000000-e7ffffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 40)
 Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Capabilities: [c0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
 Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
 Latency: 32
 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
 Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
 Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
 Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
 Region 4: I/O ports at d000 [size=16]
 Capabilities: [c0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a) (prog-if 00 [UHCI])
 Subsystem: First International Computer, Inc. VA-502 Mainboard
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
 Latency: 32, Cache Line Size: 32 bytes
 Interrupt: pin D routed to IRQ 15
 Region 4: I/O ports at d400 [size=32]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a) (prog-if 00 [UHCI])
 Subsystem: First International Computer, Inc. VA-502 Mainboard
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
 Latency: 32, Cache Line Size: 32 bytes
 Interrupt: pin D routed to IRQ 15
 Region 4: I/O ports at d800 [size=32]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
 Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
 Interrupt: pin ? routed to IRQ 5
 Capabilities: [68] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
 Subsystem: Creative Labs CT4832 SBLive! Value
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
 Latency: 32 (500ns min, 5000ns max)
 Interrupt: pin A routed to IRQ 10
 Region 0: I/O ports at dc00 [size=32]
 Capabilities: [dc] Power Management version 1
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.1 Input device controller: Creative Labs SB Live! Game Port (rev 08)
 Subsystem: Creative Labs Gameport Joystick
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
 Latency: 32
 Region 0: I/O ports at e000 [size=8]
 Capabilities: [dc] Power Management version 1
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
 Subsystem: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
 Interrupt: pin A routed to IRQ 15
 Region 0: I/O ports at e400 [size=32]

01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4
MX 440 AGP 8x] (rev c1) (prog-if 00 [VGA controller])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
 Latency: 248 (1250ns min, 250ns max)
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
 Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
 [virtual] Expansion ROM at ed000000 [disabled] [size=128K]
 Capabilities: [60] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [44] AGP version 3.0
  Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
  Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4

ignacio@airwave:~$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: Maxtor 6E020L0   Rev: NAR6
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi0 Channel: 00 Id: 01 Lun: 00
  Vendor: TSSTcorp Model: CD/DVDW SH-W162Z Rev: TS01
  Type:   CD-ROM                           ANSI  SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
  Vendor: Kingston Model: DataTraveler 2.0 Rev: 6.50
  Type:   Direct-Access                    ANSI  SCSI revision: 00

Re: Driver needed/broken? "U.S. Robotics Sportster 33600 FAX/Voice Int"

[Oliver Neukum]

Am Mittwoch 27 August 2008 15:15:51 schrieb Ignacio Santolin:
> I Using an old modem (U.S. Robotics Sportster 33600 FAX/Voice Int)
> ***NOT WINMODEM***
> 
> Kernel succesfly detects the card (not as modem) and isnt creates the
> /dev/modem (driver develop needed?), Just works sending commands to
> /dev/ttyS1
> NOTE: the modem is not present in any hardware manager or lspci

/dev/modem is a symlink to be created by the management tool of your
distribution. The kernel is not involved.
As for lspci, it lists pci devices. Your modem is isa.

Everything seems the be as it should be from a kernel viewpoint.

	Regards
		Oliver