From: "Bryan O'Sullivan" <bos@pathscale.com>
To: rolandd@cisco.com, gregkh@suse.de, akpm@osdl.org, davem@davemloft.net
Cc: linux-kernel@vger.kernel.org, openib-general@openib.org
Subject: [PATCH 18 of 20] ipath - kbuild infrastructure
Date: Thu, 9 Mar 2006 16:35:48 -0800 [thread overview]
Message-ID: <867a396dd518ac63ab41.1141950948@eng-12.pathscale.com> (raw)
In-Reply-To: <patchbomb.1141950930@eng-12.pathscale.com>
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
diff -r 1c88f73c2ac0 -r 867a396dd518 drivers/infiniband/hw/ipath/Kconfig
--- /dev/null Thu Jan 1 00:00:00 1970 +0000
+++ b/drivers/infiniband/hw/ipath/Kconfig Thu Mar 9 16:17:00 2006 -0800
@@ -0,0 +1,18 @@
+config IPATH_CORE
+ tristate "PathScale InfiniPath Driver"
+ depends on 64BIT && (PCIEPORTBUS || X86_HT)
+ ---help---
+ This is a low-level driver for PathScale InfiniPath host channel
+ adapters (HCAs) based on the HT-400 and PE-800 chips, including
+ the InfiniPath HT-460, the small form factor InfiniPath HT-460,
+ the InfiniPath HT-470 and the Linux Networx LS/X.
+
+config INFINIBAND_IPATH
+ tristate "PathScale InfiniPath Verbs Driver"
+ depends on IPATH_CORE && INFINIBAND
+ ---help---
+ This is a driver that provides InfiniBand verbs support for
+ PathScale InfiniPath host channel adapters (HCAs). This
+ allows these devices to be used with both kernel upper level
+ protocols such as IP-over-InfiniBand as well as with userspace
+ applications (in conjunction with InfiniBand userspace access).
diff -r 1c88f73c2ac0 -r 867a396dd518 drivers/infiniband/hw/ipath/Makefile
--- /dev/null Thu Jan 1 00:00:00 1970 +0000
+++ b/drivers/infiniband/hw/ipath/Makefile Thu Mar 9 16:17:00 2006 -0800
@@ -0,0 +1,42 @@
+EXTRA_CFLAGS += -O3
+
+_ipath_idstr:="PathScale $(shell date +%F)"
+EXTRA_CFLAGS += -DIPATH_IDSTR='$(_ipath_idstr)' -DIPATH_KERN_TYPE=0
+
+obj-$(CONFIG_IPATH_CORE) += ipath_core.o
+obj-$(CONFIG_INFINIBAND_IPATH) += ib_ipath.o
+obj-$(CONFIG_IPATH_ETHER) += ipath_ether.o
+
+ipath_core-y := \
+ ipath_copy.o \
+ ipath_diag.o \
+ ipath_driver.o \
+ ipath_eeprom.o \
+ ipath_file_ops.o \
+ ipath_ht400.o \
+ ipath_init_chip.o \
+ ipath_intr.o \
+ ipath_layer.o \
+ ipath_pe800.o \
+ ipath_sma.o \
+ ipath_stats.o \
+ ipath_sysfs.o \
+ ipath_user_pages.o
+
+ipath_core-$(CONFIG_X86_64) += ipath_wc_x86_64.o
+
+ib_ipath-y := \
+ ipath_cq.o \
+ ipath_keys.o \
+ ipath_mad.o \
+ ipath_mr.o \
+ ipath_qp.o \
+ ipath_rc.o \
+ ipath_ruc.o \
+ ipath_srq.o \
+ ipath_uc.o \
+ ipath_ud.o \
+ ipath_verbs.o \
+ ipath_verbs_mcast.o
+
+ipath_ether-y := ipath_eth.o
next prev parent reply other threads:[~2006-03-10 0:36 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-10 0:35 [PATCH 0 of 20] [RFC] ipath driver - another round for review Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 1 of 20] ipath - core driver header files Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 2 of 20] ipath - core device driver Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 3 of 20] ipath - copy and send routines for sending an skb Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 4 of 20] ipath - support for HyperTransport devices Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 5 of 20] ipath - support for PCI Express devices Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 6 of 20] ipath - chip initialisation code Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 7 of 20] ipath - misc driver support code Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 8 of 20] ipath - sysfs support for core driver Bryan O'Sullivan
2006-03-10 1:11 ` Greg KH
2006-03-10 5:09 ` Bryan O'Sullivan
2006-03-05 3:08 ` Pavel Machek
2006-03-10 6:37 ` Greg KH
2006-03-10 14:59 ` Roland Dreier
2006-03-10 15:08 ` [openib-general] " Hal Rosenstock
2006-03-10 16:54 ` Greg KH
2006-03-10 17:05 ` Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 9 of 20] ipath - char devices for diagnostics and lightweight subnet management Bryan O'Sullivan
2006-03-10 0:45 ` Roland Dreier
2006-03-10 0:47 ` Bryan O'Sullivan
2006-03-10 0:52 ` Roland Dreier
2006-03-10 0:35 ` [PATCH 10 of 20] ipath - support for userspace apps using core driver Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 11 of 20] ipath - layering interfaces used by higher-level driver code Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 12 of 20] ipath - infiniband header files Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 13 of 20] ipath - infiniband UC and UD protocol support Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 14 of 20] ipath - infiniband RC " Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 15 of 20] ipath - misc infiniband code, part 1 Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 16 of 20] ipath - misc infiniband code, part 2 Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 17 of 20] ipath - infiniband verbs support Bryan O'Sullivan
2006-03-10 0:35 ` Bryan O'Sullivan [this message]
2006-03-13 18:10 ` [PATCH 18 of 20] ipath - kbuild infrastructure Adrian Bunk
2006-03-13 18:38 ` Robert Walsh
2006-03-13 19:24 ` Bryan O'Sullivan
2006-03-13 19:36 ` Sam Ravnborg
2006-03-13 19:39 ` Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 19 of 20] ipath - integrate driver into infiniband " Bryan O'Sullivan
2006-03-10 0:35 ` [PATCH 20 of 20] ipath - ethernet emulation driver Bryan O'Sullivan
2006-03-10 15:35 ` [openib-general] [PATCH 0 of 20] [RFC] ipath driver - another round for review Michael S. Tsirkin
2006-03-10 16:02 ` Bryan O'Sullivan
2006-03-10 17:48 ` Grant Grundler
2006-03-10 17:54 ` Bryan O'Sullivan
2006-03-10 22:30 ` Grant Grundler
2006-03-11 4:20 ` Bryan O'Sullivan
[not found] <ac5354bb50d515de2a5c.1141922831@localhost.localdomain>
2006-03-09 17:53 ` [PATCH 18 of 20] ipath - kbuild infrastructure Roland Dreier
2006-03-09 18:56 ` Sam Ravnborg
2006-03-09 19:00 ` Roland Dreier
2006-03-09 21:15 ` Sam Ravnborg
2006-03-09 23:24 ` Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=867a396dd518ac63ab41.1141950948@eng-12.pathscale.com \
--to=bos@pathscale.com \
--cc=akpm@osdl.org \
--cc=davem@davemloft.net \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=openib-general@openib.org \
--cc=rolandd@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®