Re: 2.6.26-rc9-git9 doesn't boot on Macintel

["Yinghai Lu" <yhlu.kernel@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1074 bytes --]

On Wed, Jul 16, 2008 at 12:50 AM, Justin Mattock
<justinmattock@gmail.com> wrote:
> On Wed, Jul 16, 2008 at 7:44 AM, Yinghai Lu <yhlu.kernel@gmail.com> wrote:
>> I looked at your dmesg from 2.6.25.10
>>
>> it tried to use mmconfig, and later fall back to conf1, because
>> 1. your MCFG said it support bus [0,255], and range will be
>> [0xf0000000, 0xffffffff]
>> 2. firmware only reserve [0xf0000000, 0xf4000000)
>>
>> and 2.5.25 will not check acp reserved range.
>>
>> from 2.6.26, it will check if the [0xf0000000, 0xffffffff] is reserved
>> via acpi dsdt _crs?
>> it will fail too.
>>
>> So MCFG table is broken.
>>
>> You need to get firmware update from your vendor.
>>
>> or we need to put that system on DMI check to change end_bus_number
>> from 0xff to 0x3f
>>
>> ps: mem=2g will not work, it will can not change mcfg table etc... you
>> need take out 1G ram out.
>>
>> YH
>>
>
> Well shit man, that sucks...
> how hard is it to do a DMI check?
> regards;

please check attached patch... not sure the
DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2"),  is right or not.

YH

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: mmconfig_apple_macpro2.patch --]
[-- Type: text/x-patch; name=mmconfig_apple_macpro2.patch, Size: 1702 bytes --]

[PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

change the mconf bus range from [0,0xff] to to [0, 0x3f]
to match range [0xf0000000, 0xf4000000) in e820 tables.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

---
 arch/x86/pci/mmconfig-shared.c |   35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
+++ linux-2.6/arch/x86/pci/mmconfig-shared.c
@@ -374,6 +374,40 @@ reject:
 
 static int __initdata known_bridge;
 
+static int __devinit check_mmconf(const struct dmi_system_id *d)
+{
+	typeof(pci_mmcfg_config[0]) *cfg;
+
+	if ((pci_mmcfg_config_num != 1) ||
+	    (pci_mmcfg_config == NULL) ||
+	    (pci_mmcfg_config[0].address == 0))
+		return 1;
+
+	cfg = &pci_mmcfg_config[0];
+
+	if (cfg->start_bus_number == 0 && cfg->end_bus_number > 0x3f)
+		cfg->end_bus_number = 0x3f;
+
+	return 0;
+}
+
+static struct dmi_system_id __devinitdata mmconf_dmi_table[] = {
+        {
+                .callback = check_mmconf,
+                .ident = "Apple",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2"),
+                },
+        },
+        {}
+};
+
+void __init check_mmconf_dmi(void)
+{
+        dmi_check_system(mmconf_dmi_table);
+}
+
 static void __init __pci_mmcfg_init(int early)
 {
 	/* MMCONFIG disabled */
@@ -395,6 +429,7 @@ static void __init __pci_mmcfg_init(int
 
 	if (!known_bridge) {
 		acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
+		check_mmconf_dmi();
 		pci_mmcfg_reject_broken(early);
 	}