* [PATCH v2] ARM: dts: mvebu: linksys: enable buffer manager support
@ 2017-03-16 5:53 Ralph Sennhauser
2017-03-23 16:29 ` Gregory CLEMENT
0 siblings, 1 reply; 2+ messages in thread
From: Ralph Sennhauser @ 2017-03-16 5:53 UTC (permalink / raw)
To: Gregory Clement
Cc: Ralph Sennhauser, Jason Cooper, Andrew Lunn,
Sebastian Hesselbarth, Rob Herring, Mark Rutland, Russell King,
moderated list:ARM/Marvell Kirkwood and Armada 370, 375, 38x,...,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Add appropriate properties to devices in the Linksys WRT AC Series for the
mvneta driver to use hardware buffer management.
Also update "soc" ranges property and set the status of bm and bm-bppi
to "okay" (SRAM).
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
---
v1 -> v2:
Use independent pools for short (suggested by Gregory Clement)
arch/arm/boot/dts/armada-385-linksys.dtsi | 17 ++++++++++++++++-
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 17 ++++++++++++++++-
2 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index df47bf1..aa0d225 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -59,7 +59,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
i2c@11000 {
@@ -88,6 +89,9 @@
ethernet@70000 {
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -97,6 +101,9 @@
ethernet@34000 {
status = "okay";
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -159,6 +166,10 @@
status = "okay";
};
+ bm@c8000 {
+ status = "okay";
+ };
+
/* USB part of the eSATA/USB 2.0 port */
usb@58000 {
status = "okay";
@@ -241,6 +252,10 @@
};
};
+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 3744ba3..9efcf59 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -71,7 +71,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
internal-regs {
@@ -95,6 +96,9 @@
pinctrl-names = "default";
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -106,6 +110,9 @@
pinctrl-names = "default";
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -186,6 +193,10 @@
};
};
+ bm@c8000 {
+ status = "okay";
+ };
+
nand@d0000 {
status = "okay";
num-cs = <1>;
@@ -259,6 +270,10 @@
};
};
};
+
+ bm-bppi {
+ status = "okay";
+ };
};
gpio_keys {
--
2.10.2
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH v2] ARM: dts: mvebu: linksys: enable buffer manager support
2017-03-16 5:53 [PATCH v2] ARM: dts: mvebu: linksys: enable buffer manager support Ralph Sennhauser
@ 2017-03-23 16:29 ` Gregory CLEMENT
0 siblings, 0 replies; 2+ messages in thread
From: Gregory CLEMENT @ 2017-03-23 16:29 UTC (permalink / raw)
To: Ralph Sennhauser
Cc: Mark Rutland, Andrew Lunn, Jason Cooper,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Russell King, open list, Rob Herring,
moderated list:ARM/Marvell Kirkwood and Armada 370, 375, 38x, ...,
Sebastian Hesselbarth
Hi Ralph,
On jeu., mars 16 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:
> Add appropriate properties to devices in the Linksys WRT AC Series for the
> mvneta driver to use hardware buffer management.
>
> Also update "soc" ranges property and set the status of bm and bm-bppi
> to "okay" (SRAM).
>
> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Applied on mvebu/dt
Thanks,
Gregory
> ---
>
> v1 -> v2:
> Use independent pools for short (suggested by Gregory Clement)
>
>
> arch/arm/boot/dts/armada-385-linksys.dtsi | 17 ++++++++++++++++-
> arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 17 ++++++++++++++++-
> 2 files changed, 32 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
> index df47bf1..aa0d225 100644
> --- a/arch/arm/boot/dts/armada-385-linksys.dtsi
> +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
> @@ -59,7 +59,8 @@
> ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
> MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
> MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
> - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
> + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
> + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
>
> internal-regs {
> i2c@11000 {
> @@ -88,6 +89,9 @@
> ethernet@70000 {
> status = "okay";
> phy-mode = "rgmii-id";
> + buffer-manager = <&bm>;
> + bm,pool-long = <2>;
> + bm,pool-short = <3>;
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -97,6 +101,9 @@
> ethernet@34000 {
> status = "okay";
> phy-mode = "sgmii";
> + buffer-manager = <&bm>;
> + bm,pool-long = <0>;
> + bm,pool-short = <1>;
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -159,6 +166,10 @@
> status = "okay";
> };
>
> + bm@c8000 {
> + status = "okay";
> + };
> +
> /* USB part of the eSATA/USB 2.0 port */
> usb@58000 {
> status = "okay";
> @@ -241,6 +252,10 @@
> };
> };
>
> + bm-bppi {
> + status = "okay";
> + };
> +
> pcie-controller {
> status = "okay";
>
> diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> index 3744ba3..9efcf59 100644
> --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> @@ -71,7 +71,8 @@
> ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
> MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
> MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
> - MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
> + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
> + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
>
> internal-regs {
>
> @@ -95,6 +96,9 @@
> pinctrl-names = "default";
> status = "okay";
> phy-mode = "rgmii-id";
> + buffer-manager = <&bm>;
> + bm,pool-long = <0>;
> + bm,pool-short = <1>;
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -106,6 +110,9 @@
> pinctrl-names = "default";
> status = "okay";
> phy-mode = "rgmii-id";
> + buffer-manager = <&bm>;
> + bm,pool-long = <2>;
> + bm,pool-short = <3>;
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -186,6 +193,10 @@
> };
> };
>
> + bm@c8000 {
> + status = "okay";
> + };
> +
> nand@d0000 {
> status = "okay";
> num-cs = <1>;
> @@ -259,6 +270,10 @@
> };
> };
> };
> +
> + bm-bppi {
> + status = "okay";
> + };
> };
>
> gpio_keys {
> --
> 2.10.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-03-23 16:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-16 5:53 [PATCH v2] ARM: dts: mvebu: linksys: enable buffer manager support Ralph Sennhauser
2017-03-23 16:29 ` Gregory CLEMENT
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome