Re: modprobe ipmi_si hangs under 2.6.30-rc5

[Ferenc Wagner <wferi@niif.hu>]

[-- Attachment #1: Type: text/plain, Size: 3355 bytes --]

Andrew Morton <akpm@linux-foundation.org> writes:

> On Tue, 12 May 2009 23:28:59 +0200 Ferenc Wagner <wferi@niif.hu> wrote:
>
>> On a Dell PowerEdge 2650 2.6.30-rc5 can't load the ipmi_si module.
>> 2.6.29 has no such problems:
>> 
>> [   46.292160] IPMI System Interface driver.
>> [   46.300321] ipmi_si: Trying SMBIOS-specified smic state machine at i/o address 0xecf4, slave address 0x20, irq 0
>> [   46.408212] ipmi: Found new BMC (man_id: 0x0002a2,  prod_id: 0x0000, dev_id: 0x00)
>> [   46.423454] IPMI smic interface initialized
>> 
>> But under 2.6.30-rc5:
>> 
>> # modprobe ipmi_si bt_debug=7 smic_debug=7 kcs_debug=7
>> 
>> [  867.851694] IPMI System Interface driver.
>> [  867.859771] ipmi_si: Trying SMBIOS-specified smic state machine at i/o address 0xecf4, slave address 0x20, irq 0
>> [  867.880250] start_smic_transaction - 18 01
>> [  867.880263] smic_event - smic->smic_timeout = 2000000, time = 0
>> ...
>>
>> [  867.996243] smic_event - smic->smic_timeout = 2000000, time = 0
>> [  867.996250] smic_event - smic->smic_timeout = 2000000, time = 0
>> [  867.996256] smic_event - smic->smic_timeout = 2000000, time = 0
>> [...]
>> 
>> 
>> This goes on through megabytes.  The modprobe process didn't terminate
>> for 10 minutes, and there was some output like this (cleaned from
>> smic_events all around the place by hand):
>> 
>> INFO: task modprobe:6414 blocked for more than 120 seconds.
>> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> modprobe      D f6805780 0  6414   4077
>>  f48dfe68 00000082 00000000 f6805780
>>  f48dfe48 f90271cf c046acc0 f64f6a0c
>>  2002132c f6da1300 f6da14b4 c182acc0
>>  00000002 f64f6a0c 186f5ef2 000000ca
>>  f48dfe30 c0123c40 00000000 f64f69e0
>>  f48dfe30 00000282 00000001 c032456c
>> Call Trace:
>>  [<f90271cf>] ? i_ipmi_request+0x8f5/0x916 [ipmi_msghandler]
>>  [<c0123c40>] ? check_preempt_wakeup+0x146/0x180
>>  [<c01292c3>] ? try_to_wake_up+0x1f3/0x1fd
>>  [<c011c70a>] ? default_spin_lock_flags+0x8/0xe
>>  [<c031b81a>] schedule+0x8/0x17
>>  [<f9028745>] ipmi_register_smi+0x3ca/0xba1 [ipmi_msghandler]
>>  [<c028681c>] ? put_device+0xf/0x11
>>  [<c028782a>] ? device_add+0x497/0x516
>>  [<c013f2e7>] ? autoremove_wake_function+0x0/0x33
>>  [<fc2d939c>] try_smi_init+0x58f/0x726 [ipmi_si]
>>  [<fc2dc3e5>] init_ipmi_si+0x3e2/0x748 [ipmi_si]
>>  [<c010304f>] do_one_initcall+0x4a/0x115
>>  [<fc2dc003>] ? init_ipmi_si+0x0/0x748 [ipmi_si]
>>  [<c0142c0b>] ? __blocking_notifier_call_chain+0x40/0x4c
>>  [<c014ff97>] sys_init_module+0x87/0x18b
>>  [<c0107c94>] sysenter_do_call+0x12/0x28
>> 
>
> Well there have only been a handful of changes to ipmi since 2.6.29. 
> Could you try a mini-bisection?
>
> Apply revert-1.patch, test
> Apply revert-2.patch, test
> Apply revert-3.patch, test
> Apply revert-4.patch, test

After applying revert-1.patch, modprobe runs OK:

[   86.968156] IPMI System Interface driver.
[   86.976276] ipmi_si: Trying SMBIOS-specified smic state machine at i/o address 0xecf4, slave address 0x20, irq 0
[   87.117630] ipmi: Found new BMC (man_id: 0x0002a2,  prod_id: 0x0000, dev_id: 0x00)
[   87.133078] IPMI smic interface initialized

I guess there's no point in trying the rest.

When loading with debug options, it still produces insane amount of
debug messages continuously (first 671 lines of it attached).
-- 
Regards,
Feri.


[-- Attachment #2: revert1.log.gz --]
[-- Type: application/octet-stream, Size: 3394 bytes --]