Re: [PATCH 3/8] bindings: PCI: designware: Add support for the EP in designware driver

[Gustavo Pimentel <gustavo.pimentel@synopsys.com>]

Hi Kishon,

On 02/04/2018 06:35, Kishon Vijay Abraham I wrote:
> 
> 
> On Wednesday 28 March 2018 05:08 PM, Gustavo Pimentel wrote:
>> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> 
> Please add a commit message.

Ok. I'll add. Thanks for noticing it.

>> ---
>>  Documentation/devicetree/bindings/pci/designware-pcie.txt | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> index 6300762..4bb2e08 100644
>> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> @@ -3,6 +3,7 @@
>>  Required properties:
>>  - compatible:
>>  	"snps,dw-pcie" for RC mode;
>> +	"snps,dw-pcie-ep" for EP mode;
>>  - reg: Should contain the configuration address space.
>>  - reg-names: Must be "config" for the PCIe configuration space.
>>      (The old way of getting the configuration address space from "ranges"
>> @@ -56,3 +57,15 @@ Example configuration:
>>  		#interrupt-cells = <1>;
>>  		num-lanes = <1>;
>>  	};
>> +or
>> +	pcie_ep: pcie_ep@dfc00000 {
>> +		compatible = "snps,dw-pcie-ep";
>> +		reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
>> +		      <0xdfc01000 0x0001000>, /* IP registers 2 */
> 
> Doesn't this have iATU unroll space?

I don't think EP has it, but I'm no expert on this matter. Can you provide me
some example of having iATU unroll space mapping would be useful in EP scope?

> 
> Thanks
> Kishon
> 

Regards,
Gustavo