[PATCH 0/2] ALSA: fix a user-triggerable WARN on repeated DSP load

[PATCH 0/2] ALSA: fix a user-triggerable WARN on repeated DSP load

[YuanZhe Liu]

snd_hwdep_dsp_load() checks hw->dsp_loaded and then calls the driver's
dsp_load callback without any serialization.  A hwdep file descriptor can
be shared among threads, so two SNDRV_HWDEP_IOCTL_DSP_LOAD requests for
the same index can both pass the check and run the callback concurrently.

The snd-usb-usx2y driver then enters usx2y_async_seq04_init() twice, which
hits WARN_ON(usx2y->as04.buffer) and may also allocate the US-428
sequence URBs twice.

Patch 1 adds a per-device mutex around the check, the callback and the
bookkeeping.  Patch 2 removes the WARN_ON() assertions from the usx2y
initialization helpers: a repeated request after a partially failed load
is a valid sequence from user space, so the driver should return -EBUSY
instead of warning.

YuanZhe Liu (2):
  ALSA: hwdep: Serialize DSP load requests
  ALSA: usx2y: Avoid WARN on a repeated DSP load

 include/sound/hwdep.h      | 1 +
 sound/core/hwdep.c         | 2 ++
 sound/usb/usx2y/usbusx2y.c | 4 ++--
 3 files changed, 5 insertions(+), 2 deletions(-)

-- 
2.34.1

[PATCH 1/2] ALSA: hwdep: Serialize DSP load requests

[YuanZhe Liu]

The check of the loaded DSP indices and the call of the driver's
dsp_load callback in snd_hwdep_dsp_load() are not serialized.  A hwdep
file descriptor can be shared among threads, or inherited across fork,
so two SNDRV_HWDEP_IOCTL_DSP_LOAD requests for the same index can both
observe the index as unloaded and enter the driver's callback
concurrently, even though the device itself is opened exclusively.

This breaks the assumption behind hw->dsp_loaded that a firmware index
is loaded only once.  For example, snd-usb-usx2y hits
WARN_ON(usx2y->as04.buffer) in usx2y_async_seq04_init() and may
allocate the US-428 sequence URBs twice.

Serialize the check, the callback invocation and the bookkeeping with a
per-hwdep mutex, so that the second request returns -EBUSY.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Co-developed-by: Bin Yu <byu@xidian.edu.cn>
Signed-off-by: Bin Yu <byu@xidian.edu.cn>
Co-developed-by: Cheng Wen <wencheng@xidian.edu.cn>
Signed-off-by: Cheng Wen <wencheng@xidian.edu.cn>
Signed-off-by: YuanZhe Liu <25031212351@stu.xidian.edu.cn>
---
 include/sound/hwdep.h | 1 +
 sound/core/hwdep.c    | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/include/sound/hwdep.h b/include/sound/hwdep.h
index b0da633184cd..7357727f0660 100644
--- a/include/sound/hwdep.h
+++ b/include/sound/hwdep.h
@@ -57,6 +57,7 @@ struct snd_hwdep {
 
 	struct mutex open_mutex;
 	int used;			/* reference counter */
+	struct mutex dsp_mutex;		/* serializes DSP load requests */
 	unsigned int dsp_loaded;	/* bit fields of loaded dsp indices */
 	unsigned int exclusive:1;	/* exclusive access mode */
 };
diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c
index c6de5345e946..fb9034897c56 100644
--- a/sound/core/hwdep.c
+++ b/sound/core/hwdep.c
@@ -212,6 +212,7 @@ static int snd_hwdep_dsp_load(struct snd_hwdep *hw,
 		return -ENXIO;
 	if (info->index >= 32)
 		return -EINVAL;
+	guard(mutex)(&hw->dsp_mutex);
 	/* check whether the dsp was already loaded */
 	if (hw->dsp_loaded & (1u << info->index))
 		return -EBUSY;
@@ -380,6 +381,7 @@ int snd_hwdep_new(struct snd_card *card, char *id, int device,
 
 	init_waitqueue_head(&hwdep->open_wait);
 	mutex_init(&hwdep->open_mutex);
+	mutex_init(&hwdep->dsp_mutex);
 	hwdep->card = card;
 	hwdep->device = device;
 	if (id)
-- 
2.34.1

[PATCH 2/2] ALSA: usx2y: Avoid WARN on a repeated DSP load

[YuanZhe Liu]

snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and
the interrupt URB when the FPGA firmware image (index 1) is loaded.  If
a later step of the same request fails, for example the creation of the
ALSA devices, a following DSP load request from user space enters the
initialization functions for a second time.

usx2y_async_seq04_init() and usx2y_in04_init() assert with WARN_ON()
that they are called only once, so such a request triggers a kernel
warning before returning -EBUSY, although nothing is corrupted: the
functions bail out without allocating again and the leak that the check
was added for is still prevented.

Return -EBUSY without the warning.

Fixes: 02d382af1c4e ("ALSA: usx2y: Fix potential memory leaks")
Cc: stable@vger.kernel.org
Co-developed-by: Bin Yu <byu@xidian.edu.cn>
Signed-off-by: Bin Yu <byu@xidian.edu.cn>
Co-developed-by: Cheng Wen <wencheng@xidian.edu.cn>
Signed-off-by: Cheng Wen <wencheng@xidian.edu.cn>
Signed-off-by: YuanZhe Liu <25031212351@stu.xidian.edu.cn>
---
 sound/usb/usx2y/usbusx2y.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index 108f9bddf9aa..14498ce84440 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -268,7 +268,7 @@ int usx2y_async_seq04_init(struct usx2ydev *usx2y)
 {
 	int	err = 0, i;
 
-	if (WARN_ON(usx2y->as04.buffer))
+	if (usx2y->as04.buffer)
 		return -EBUSY;
 
 	usx2y->as04.buffer = kmalloc_array(URBS_ASYNC_SEQ,
@@ -300,7 +300,7 @@ int usx2y_in04_init(struct usx2ydev *usx2y)
 {
 	int err;
 
-	if (WARN_ON(usx2y->in04_urb))
+	if (usx2y->in04_urb)
 		return -EBUSY;
 
 	usx2y->in04_urb = usb_alloc_urb(0, GFP_KERNEL);
-- 
2.34.1

Re: [PATCH 0/2] ALSA: fix a user-triggerable WARN on repeated DSP load

[YuanZhe Liu]

Hi Takashi,

Could you please review this patch series?

  [PATCH 0/2] ALSA: fix a user-triggerable WARN on repeated DSP load

It serializes concurrent hwdep DSP load requests and returns EBUSY
instead of triggering a WARN on repeated usx2y initialization.

The series is unchanged. I am copying this address for visibility.

Original submission:
https://lore.kernel.org/r/20261029084810.21910-1-25031212351@stu.xidian.edu.cn

Thanks,
YuanZhe

Re: [PATCH 2/2] ALSA: usx2y: Avoid WARN on a repeated DSP load

[Takashi Iwai]

On Thu, 29 Oct 2026 09:48:10 +0100,
YuanZhe Liu wrote:
> 
> snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and
> the interrupt URB when the FPGA firmware image (index 1) is loaded.  If
> a later step of the same request fails, for example the creation of the
> ALSA devices, a following DSP load request from user space enters the
> initialization functions for a second time.
> 
> usx2y_async_seq04_init() and usx2y_in04_init() assert with WARN_ON()
> that they are called only once, so such a request triggers a kernel
> warning before returning -EBUSY, although nothing is corrupted: the
> functions bail out without allocating again and the leak that the check
> was added for is still prevented.
> 
> Return -EBUSY without the warning.
> 
> Fixes: 02d382af1c4e ("ALSA: usx2y: Fix potential memory leaks")
> Cc: stable@vger.kernel.org
> Co-developed-by: Bin Yu <byu@xidian.edu.cn>
> Signed-off-by: Bin Yu <byu@xidian.edu.cn>
> Co-developed-by: Cheng Wen <wencheng@xidian.edu.cn>
> Signed-off-by: Cheng Wen <wencheng@xidian.edu.cn>
> Signed-off-by: YuanZhe Liu <25031212351@stu.xidian.edu.cn>

IMO, it's better to fix the error path in snd_usx2y_hwdep_dsp_load()
instead.  The WARN_ON() was meant that it shouldn't happen, and if it
happens, it's something to be fixed, instead.


thanks,

Takashi

Re: [PATCH 1/2] ALSA: hwdep: Serialize DSP load requests

[Takashi Iwai]

On Thu, 29 Oct 2026 09:48:09 +0100,
YuanZhe Liu wrote:
> 
> The check of the loaded DSP indices and the call of the driver's
> dsp_load callback in snd_hwdep_dsp_load() are not serialized.  A hwdep
> file descriptor can be shared among threads, or inherited across fork,
> so two SNDRV_HWDEP_IOCTL_DSP_LOAD requests for the same index can both
> observe the index as unloaded and enter the driver's callback
> concurrently, even though the device itself is opened exclusively.
> 
> This breaks the assumption behind hw->dsp_loaded that a firmware index
> is loaded only once.  For example, snd-usb-usx2y hits
> WARN_ON(usx2y->as04.buffer) in usx2y_async_seq04_init() and may
> allocate the US-428 sequence URBs twice.
> 
> Serialize the check, the callback invocation and the bookkeeping with a
> per-hwdep mutex, so that the second request returns -EBUSY.
> 
> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> Cc: stable@vger.kernel.org
> Co-developed-by: Bin Yu <byu@xidian.edu.cn>
> Signed-off-by: Bin Yu <byu@xidian.edu.cn>
> Co-developed-by: Cheng Wen <wencheng@xidian.edu.cn>
> Signed-off-by: Cheng Wen <wencheng@xidian.edu.cn>
> Signed-off-by: YuanZhe Liu <25031212351@stu.xidian.edu.cn>

Applied this one.  Thanks.


Takashi

[PATCH v2] ALSA: usx2y: Release the URBs when the DSP load fails

[YuanZhe Liu]

snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and
the interrupt URB when the FPGA firmware image with index 1 is loaded,
and then creates the ALSA devices.  If usx2y_in04_init() or
usx2y_create_alsa_devices() fails, the URBs that were already set up
are left in place.

The core keeps the index unloaded when the callback fails, so user
space may issue the same request again.  The second attempt then enters
usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still
allocated and trips WARN_ON(usx2y->as04.buffer) or
WARN_ON(usx2y->in04_urb).

Release the URBs on these error paths instead.  A retried request then
starts from a clean state and the assertions keep their meaning.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Co-developed-by: Bin Yu <byu@xidian.edu.cn>
Signed-off-by: Bin Yu <byu@xidian.edu.cn>
Co-developed-by: Cheng Wen <wencheng@xidian.edu.cn>
Signed-off-by: Cheng Wen <wencheng@xidian.edu.cn>
Signed-off-by: YuanZhe Liu <25031212351@stu.xidian.edu.cn>
---
v2: release the URBs on the failing paths of snd_usx2y_hwdep_dsp_load()
    instead of removing the WARN_ON()s, as suggested by Takashi Iwai.

 sound/usb/usx2y/usX2Yhwdep.c |  2 ++
 sound/usb/usx2y/usbusx2y.c   | 16 ++++++++++++++++
 sound/usb/usx2y/usbusx2y.h   |  1 +
 3 files changed, 19 insertions(+)

diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c
index 7f153a2fcdd8..13995e81d2ae 100644
--- a/sound/usb/usx2y/usX2Yhwdep.c
+++ b/sound/usb/usx2y/usX2Yhwdep.c
@@ -201,11 +201,13 @@ static int snd_usx2y_hwdep_dsp_load(struct snd_hwdep *hw,
 		err = usx2y_in04_init(priv);
 		if (err) {
 			dev_err(&dev->dev, "usx2y_in04_init error\n");
+			usx2y_free_urbs(priv);
 			return err;
 		}
 		err = usx2y_create_alsa_devices(hw->card);
 		if (err) {
 			dev_err(&dev->dev, "usx2y_create_alsa_devices error %i\n", err);
+			usx2y_free_urbs(priv);
 			return err;
 		}
 		priv->chip_status |= USX2Y_STAT_CHIP_INIT;
diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index 108f9bddf9aa..8a551abe47dc 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -349,6 +349,22 @@ static void usx2y_unlinkseq(struct snd_usx2y_async_seq *s)
 	s->buffer = NULL;
 }
 
+/*
+ * Release the URBs set up by usx2y_async_seq04_init() and usx2y_in04_init().
+ * Used when a later step of the DSP loading fails.
+ */
+void usx2y_free_urbs(struct usx2ydev *usx2y)
+{
+	if (usx2y->in04_urb) {
+		usb_kill_urb(usx2y->in04_urb);
+		usb_free_urb(usx2y->in04_urb);
+		usx2y->in04_urb = NULL;
+		kfree(usx2y->in04_buf);
+		usx2y->in04_buf = NULL;
+	}
+	usx2y_unlinkseq(&usx2y->as04);
+}
+
 static const struct usb_device_id snd_usx2y_usb_id_table[] = {
 	{
 		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE,
diff --git a/sound/usb/usx2y/usbusx2y.h b/sound/usb/usx2y/usbusx2y.h
index 7b6deed17d4b..e5e26ac8dc04 100644
--- a/sound/usb/usx2y/usbusx2y.h
+++ b/sound/usb/usx2y/usbusx2y.h
@@ -110,6 +110,7 @@ int usx2y_audio_create(struct snd_card *card);
 
 int usx2y_async_seq04_init(struct usx2ydev *usx2y);
 int usx2y_in04_init(struct usx2ydev *usx2y);
+void usx2y_free_urbs(struct usx2ydev *usx2y);
 
 #define NAME_ALLCAPS "US-X2Y"
 
-- 
2.34.1

[PATCH v3] ALSA: usx2y: Release the URBs when the DSP load fails

[YuanZhe Liu]

snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and
the interrupt URB when the FPGA firmware image with index 1 is loaded,
and then creates the ALSA devices.  If usx2y_in04_init() or
usx2y_create_alsa_devices() fails, the URBs that were already set up
are left in place.

The core keeps the index unloaded when the callback fails, so user
space may issue the same request again.  The second attempt then enters
usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still
allocated and trips WARN_ON(usx2y->as04.buffer) or
WARN_ON(usx2y->in04_urb).

Release the URBs on these error paths instead, so that a retried
request starts from a clean state and the assertions keep their
meaning.

Releasing the URBs also lets a retried request reach
usx2y_create_alsa_devices() again, on a card that keeps the MIDI and
PCM devices created by the failed attempt.  For the US-428 the audio
streams would then index usx2y->subs[] past its end, so do not
initialise a partially created card a second time: mark the chip as
hung when the ALSA devices could not be created, and refuse further DSP
load requests.  A failure of usx2y_in04_init() leaves the card
untouched and remains retryable.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Co-developed-by: Bin Yu <byu@xidian.edu.cn>
Signed-off-by: Bin Yu <byu@xidian.edu.cn>
Co-developed-by: Cheng Wen <wencheng@xidian.edu.cn>
Signed-off-by: Cheng Wen <wencheng@xidian.edu.cn>
Signed-off-by: YuanZhe Liu <25031212351@stu.xidian.edu.cn>
---
v3: do not initialise a partially created card a second time.  A failed
    usx2y_create_alsa_devices() now marks the chip as hung, so a retried
    DSP load request returns -ENODEV instead of running the ALSA device
    creation again.

 sound/usb/usx2y/usX2Yhwdep.c |  6 ++++++
 sound/usb/usx2y/usbusx2y.c   | 16 ++++++++++++++++
 sound/usb/usx2y/usbusx2y.h   |  1 +
 3 files changed, 23 insertions(+)

diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c
index 7f153a2fcdd8..366167c62575 100644
--- a/sound/usb/usx2y/usX2Yhwdep.c
+++ b/sound/usb/usx2y/usX2Yhwdep.c
@@ -179,6 +179,9 @@ static int snd_usx2y_hwdep_dsp_load(struct snd_hwdep *hw,
 	int lret, err;
 	char *buf;
 
+	if (priv->chip_status & USX2Y_STAT_CHIP_HUP)
+		return -ENODEV;
+
 	buf = memdup_user(dsp->image, dsp->length);
 	if (IS_ERR(buf))
 		return PTR_ERR(buf);
@@ -201,11 +204,14 @@ static int snd_usx2y_hwdep_dsp_load(struct snd_hwdep *hw,
 		err = usx2y_in04_init(priv);
 		if (err) {
 			dev_err(&dev->dev, "usx2y_in04_init error\n");
+			usx2y_free_urbs(priv);
 			return err;
 		}
 		err = usx2y_create_alsa_devices(hw->card);
 		if (err) {
 			dev_err(&dev->dev, "usx2y_create_alsa_devices error %i\n", err);
+			usx2y_free_urbs(priv);
+			priv->chip_status |= USX2Y_STAT_CHIP_HUP;
 			return err;
 		}
 		priv->chip_status |= USX2Y_STAT_CHIP_INIT;
diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index 108f9bddf9aa..8a551abe47dc 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -349,6 +349,22 @@ static void usx2y_unlinkseq(struct snd_usx2y_async_seq *s)
 	s->buffer = NULL;
 }
 
+/*
+ * Release the URBs set up by usx2y_async_seq04_init() and usx2y_in04_init().
+ * Used when a later step of the DSP loading fails.
+ */
+void usx2y_free_urbs(struct usx2ydev *usx2y)
+{
+	if (usx2y->in04_urb) {
+		usb_kill_urb(usx2y->in04_urb);
+		usb_free_urb(usx2y->in04_urb);
+		usx2y->in04_urb = NULL;
+		kfree(usx2y->in04_buf);
+		usx2y->in04_buf = NULL;
+	}
+	usx2y_unlinkseq(&usx2y->as04);
+}
+
 static const struct usb_device_id snd_usx2y_usb_id_table[] = {
 	{
 		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE,
diff --git a/sound/usb/usx2y/usbusx2y.h b/sound/usb/usx2y/usbusx2y.h
index 7b6deed17d4b..e5e26ac8dc04 100644
--- a/sound/usb/usx2y/usbusx2y.h
+++ b/sound/usb/usx2y/usbusx2y.h
@@ -110,6 +110,7 @@ int usx2y_audio_create(struct snd_card *card);
 
 int usx2y_async_seq04_init(struct usx2ydev *usx2y);
 int usx2y_in04_init(struct usx2ydev *usx2y);
+void usx2y_free_urbs(struct usx2ydev *usx2y);
 
 #define NAME_ALLCAPS "US-X2Y"
 
-- 
2.34.1

[PATCH v4] ALSA: usx2y: Refuse a retried DSP load after a failure

[YuanZhe Liu]

snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and
the interrupt URB when the FPGA firmware image with index 1 is loaded,
and then creates the ALSA devices.  If usx2y_in04_init() or
usx2y_create_alsa_devices() fails, the URBs that were already set up
are left in place.

The core keeps the index unloaded when the callback fails, so user
space may issue the same request again.  The second attempt then enters
usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still
allocated and trips WARN_ON(usx2y->as04.buffer) or
WARN_ON(usx2y->in04_urb).

The URBs cannot be released at this point: the card may already have
registered PCM devices that user space can still open, and the
disconnect handler accesses the URBs without holding the DSP lock.
Mark the chip as hung instead, so that a retried request is refused
with -ENODEV and the assertions keep their meaning.  The URBs are
released by snd_usx2y_card_private_free() when the card is freed.

A failing usx2y_async_seq04_init() still releases its own URBs, so that
path remains retryable.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Co-developed-by: Bin Yu <byu@xidian.edu.cn>
Signed-off-by: Bin Yu <byu@xidian.edu.cn>
Co-developed-by: Cheng Wen <wencheng@xidian.edu.cn>
Signed-off-by: Cheng Wen <wencheng@xidian.edu.cn>
Signed-off-by: YuanZhe Liu <25031212351@stu.xidian.edu.cn>
---
v4: drop the release of the URBs on the error paths.  The card may already
    have registered PCM devices, and the disconnect handler accesses the
    URBs without the DSP lock; mark the chip as hung instead and let
    snd_usx2y_card_private_free() release the URBs.

 sound/usb/usx2y/usX2Yhwdep.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c
index 7f153a2fcdd8..3800c5b5887c 100644
--- a/sound/usb/usx2y/usX2Yhwdep.c
+++ b/sound/usb/usx2y/usX2Yhwdep.c
@@ -179,6 +179,9 @@ static int snd_usx2y_hwdep_dsp_load(struct snd_hwdep *hw,
 	int lret, err;
 	char *buf;
 
+	if (priv->chip_status & USX2Y_STAT_CHIP_HUP)
+		return -ENODEV;
+
 	buf = memdup_user(dsp->image, dsp->length);
 	if (IS_ERR(buf))
 		return PTR_ERR(buf);
@@ -201,11 +204,13 @@ static int snd_usx2y_hwdep_dsp_load(struct snd_hwdep *hw,
 		err = usx2y_in04_init(priv);
 		if (err) {
 			dev_err(&dev->dev, "usx2y_in04_init error\n");
+			priv->chip_status |= USX2Y_STAT_CHIP_HUP;
 			return err;
 		}
 		err = usx2y_create_alsa_devices(hw->card);
 		if (err) {
 			dev_err(&dev->dev, "usx2y_create_alsa_devices error %i\n", err);
+			priv->chip_status |= USX2Y_STAT_CHIP_HUP;
 			return err;
 		}
 		priv->chip_status |= USX2Y_STAT_CHIP_INIT;
-- 
2.34.1

Re: [PATCH v4] ALSA: usx2y: Refuse a retried DSP load after a failure

[Takashi Iwai]

On Sat, 31 Oct 2026 20:15:57 +0100,
YuanZhe Liu wrote:
> 
> snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and
> the interrupt URB when the FPGA firmware image with index 1 is loaded,
> and then creates the ALSA devices.  If usx2y_in04_init() or
> usx2y_create_alsa_devices() fails, the URBs that were already set up
> are left in place.
> 
> The core keeps the index unloaded when the callback fails, so user
> space may issue the same request again.  The second attempt then enters
> usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still
> allocated and trips WARN_ON(usx2y->as04.buffer) or
> WARN_ON(usx2y->in04_urb).
> 
> The URBs cannot be released at this point: the card may already have
> registered PCM devices that user space can still open, and the
> disconnect handler accesses the URBs without holding the DSP lock.
> Mark the chip as hung instead, so that a retried request is refused
> with -ENODEV and the assertions keep their meaning.  The URBs are
> released by snd_usx2y_card_private_free() when the card is freed.
> 
> A failing usx2y_async_seq04_init() still releases its own URBs, so that
> path remains retryable.
> 
> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> Cc: stable@vger.kernel.org
> Co-developed-by: Bin Yu <byu@xidian.edu.cn>
> Signed-off-by: Bin Yu <byu@xidian.edu.cn>
> Co-developed-by: Cheng Wen <wencheng@xidian.edu.cn>
> Signed-off-by: Cheng Wen <wencheng@xidian.edu.cn>
> Signed-off-by: YuanZhe Liu <25031212351@stu.xidian.edu.cn>

Applied now.  Thanks.


Takashi