[2.5.50, APM] "apm -s" doesn't put TP 600 to sleep

[2.5.50, APM] "apm -s" doesn't put TP 600 to sleep

[Jochen Hein]

I use a Thinkpad 600 here, 2.4 APM works quite well.  With 2.5.50 I
get when running "apm -s":

Nov 30 15:51:44 gswi1164 bad: scheduling while atomic!
Nov 30 15:51:44 gswi1164 kernel: Call Trace: [schedule+61/712]
[schedule_timeout+132/164]  [process_timeout+0/12]  [<c6abefa1>]
[<c6abf33b>]  [<c6ac1287>]  [<c6ab0f4c>]  [start_request+154/344]
[start_request+249/344]  [ide_do_request+724/820]  [schedule+616/712]
[journal_cancel_revoke+243/364]  [ext3_get_block_handle+182/776]
[journal_cancel_revoke+243/364]  [journal_cancel_revoke+243/364]
[journal_cancel_revoke+243/364]  [do_get_write_access+1272/1308]
[journal_dirty_metadata+423/472]  [ext3_free_inode+835/968]
[ext3_free_inode+922/968]  [__wake_up+32/64]  [journal_stop+596/612]
[ext3_delete_inode+0/404]  [ext3_destroy_inode+19/24]
[destroy_inode+61/84]  [generic_delete_inode+194/200]
[generic_drop_inode+16/32]  [iput+102/108]  [d_delete+106/192]
[dput+25/340]  [sys_unlink+224/288]  [capable+27/60]
[sys_ioctl+541/628]  [syscall_call+7/11]
Nov 30 15:51:44 gswi1164 kernel: drivers/usb/core/hcd-pci.c: suspend 00:07.2 to state 3
Nov 30 15:51:44 gswi1164 kernel: atkbd.c: Unknown key (set 2, scancode 0x9c, on isa0060/serio0) pressed.
Nov 30 15:51:44 gswi1164 kernel: apm: suspend: Unable to enter requested state
Nov 30 15:51:44 gswi1164 kernel: drivers/usb/core/hcd-pci.c: resume 00:07.2

Jochen

-- 
Wenn Du nicht weißt was Du tust, tu's mit Eleganz.