[PATCH 0/6] virtio 1.0 fixups, tweaks

[PATCH 0/6] virtio 1.0 fixups, tweaks

[Michael S. Tsirkin]

Fixes a couple of minor compliance issues in new virtio 1.0 code.
Plus, adds a couple of minor cleanups - not bugfixes,
but seem safe enough for 3.19.

Michael S. Tsirkin (6):
  virtio: set VIRTIO_CONFIG_S_FEATURES_OK on restore
  virtio_config: fix virtio_cread_bytes
  virtio_pci_common.h: drop VIRTIO_PCI_NO_LEGACY
  virtio_pci: move probe to common file
  virtio_pci: add VIRTIO_PCI_NO_LEGACY
  virtio: core support for config generation

 drivers/virtio/virtio_pci_common.h |  7 +++----
 include/linux/virtio_config.h      | 29 ++++++++++++++++++++++++++++-
 include/uapi/linux/virtio_pci.h    | 15 ++++++++++-----
 drivers/virtio/virtio.c            | 37 +++++++++++++++++++++++--------------
 drivers/virtio/virtio_pci_common.c | 34 +++++++++++++++++++++++++++++++++-
 drivers/virtio/virtio_pci_legacy.c | 24 ++----------------------
 6 files changed, 99 insertions(+), 47 deletions(-)

-- 
MST

[PATCH 1/6] virtio: set VIRTIO_CONFIG_S_FEATURES_OK on restore

[Michael S. Tsirkin]

virtio 1.0 devices require that drivers set VIRTIO_CONFIG_S_FEATURES_OK
after finalizing features.
virtio core missed doing this on restore, fix it up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
---
 drivers/virtio/virtio.c | 37 +++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index f226658..b9f70df 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -162,6 +162,27 @@ static void virtio_config_enable(struct virtio_device *dev)
 	spin_unlock_irq(&dev->config_lock);
 }
 
+static int virtio_finalize_features(struct virtio_device *dev)
+{
+	int ret = dev->config->finalize_features(dev);
+	unsigned status;
+
+	if (ret)
+		return ret;
+
+	if (!virtio_has_feature(dev, VIRTIO_F_VERSION_1))
+		return 0;
+
+	add_status(dev, VIRTIO_CONFIG_S_FEATURES_OK);
+	status = dev->config->get_status(dev);
+	if (!(status & VIRTIO_CONFIG_S_FEATURES_OK)) {
+		dev_err(&dev->dev, "virtio: device refuses features: %x\n",
+			status);
+		return -ENODEV;
+	}
+	return 0;
+}
+
 static int virtio_dev_probe(struct device *_d)
 {
 	int err, i;
@@ -170,7 +191,6 @@ static int virtio_dev_probe(struct device *_d)
 	u64 device_features;
 	u64 driver_features;
 	u64 driver_features_legacy;
-	unsigned status;
 
 	/* We have a driver! */
 	add_status(dev, VIRTIO_CONFIG_S_DRIVER);
@@ -208,21 +228,10 @@ static int virtio_dev_probe(struct device *_d)
 		if (device_features & (1ULL << i))
 			__virtio_set_bit(dev, i);
 
-	err = dev->config->finalize_features(dev);
+	err = virtio_finalize_features(dev);
 	if (err)
 		goto err;
 
-	if (virtio_has_feature(dev, VIRTIO_F_VERSION_1)) {
-		add_status(dev, VIRTIO_CONFIG_S_FEATURES_OK);
-		status = dev->config->get_status(dev);
-		if (!(status & VIRTIO_CONFIG_S_FEATURES_OK)) {
-			dev_err(_d, "virtio: device refuses features: %x\n",
-			       status);
-			err = -ENODEV;
-			goto err;
-		}
-	}
-
 	err = drv->probe(dev);
 	if (err)
 		goto err;
@@ -372,7 +381,7 @@ int virtio_device_restore(struct virtio_device *dev)
 	/* We have a driver! */
 	add_status(dev, VIRTIO_CONFIG_S_DRIVER);
 
-	ret = dev->config->finalize_features(dev);
+	ret = virtio_finalize_features(dev);
 	if (ret)
 		goto err;
 
-- 
MST

[PATCH 2/6] virtio_config: fix virtio_cread_bytes

[Michael S. Tsirkin]

virtio_cread_bytes is implemented incorrectly in case length happens to
be 2,4 or 8 bytes: transports and devices will assume it's an integer
value that has to be converted to LE format.

Let's just do multiple 1-byte reads: this also makes life easier
for transports who only need to implement 1,2,4 and 8 byte reads.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/linux/virtio_config.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 7979f85..a61cd37 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -305,7 +305,10 @@ static inline void virtio_cread_bytes(struct virtio_device *vdev,
 				      unsigned int offset,
 				      void *buf, size_t len)
 {
-	vdev->config->get(vdev, offset, buf, len);
+	int i;
+
+	for (i = 0; i < len; i++)
+		vdev->config->get(vdev, offset + i, buf + i, 1);
 }
 
 static inline void virtio_cwrite8(struct virtio_device *vdev,
-- 
MST

[PATCH 3/6] virtio_pci_common.h: drop VIRTIO_PCI_NO_LEGACY

[Michael S. Tsirkin]

Legacy drivers use virtio_pci_common.h too, we should not
define VIRTIO_PCI_NO_LEGACY there.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 drivers/virtio/virtio_pci_common.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/virtio/virtio_pci_common.h b/drivers/virtio/virtio_pci_common.h
index d840dad..38d99ad 100644
--- a/drivers/virtio/virtio_pci_common.h
+++ b/drivers/virtio/virtio_pci_common.h
@@ -27,7 +27,6 @@
 #include <linux/virtio.h>
 #include <linux/virtio_config.h>
 #include <linux/virtio_ring.h>
-#define VIRTIO_PCI_NO_LEGACY
 #include <linux/virtio_pci.h>
 #include <linux/highmem.h>
 #include <linux/spinlock.h>
-- 
MST

[PATCH 4/6] virtio_pci: move probe to common file

[Michael S. Tsirkin]

It turns out this make everything easier.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 drivers/virtio/virtio_pci_common.h |  6 +++---
 drivers/virtio/virtio_pci_common.c | 34 +++++++++++++++++++++++++++++++++-
 drivers/virtio/virtio_pci_legacy.c | 24 ++----------------------
 3 files changed, 38 insertions(+), 26 deletions(-)

diff --git a/drivers/virtio/virtio_pci_common.h b/drivers/virtio/virtio_pci_common.h
index 38d99ad..adddb64 100644
--- a/drivers/virtio/virtio_pci_common.h
+++ b/drivers/virtio/virtio_pci_common.h
@@ -128,8 +128,8 @@ const char *vp_bus_name(struct virtio_device *vdev);
 int vp_set_vq_affinity(struct virtqueue *vq, int cpu);
 void virtio_pci_release_dev(struct device *);
 
-#ifdef CONFIG_PM_SLEEP
-extern const struct dev_pm_ops virtio_pci_pm_ops;
-#endif
+int virtio_pci_legacy_probe(struct pci_dev *pci_dev,
+			    const struct pci_device_id *id);
+void virtio_pci_legacy_remove(struct pci_dev *pci_dev);
 
 #endif
diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
index 953057d..59d3685 100644
--- a/drivers/virtio/virtio_pci_common.c
+++ b/drivers/virtio/virtio_pci_common.c
@@ -458,7 +458,39 @@ static int virtio_pci_restore(struct device *dev)
 	return virtio_device_restore(&vp_dev->vdev);
 }
 
-const struct dev_pm_ops virtio_pci_pm_ops = {
+static const struct dev_pm_ops virtio_pci_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(virtio_pci_freeze, virtio_pci_restore)
 };
 #endif
+
+
+/* Qumranet donated their vendor ID for devices 0x1000 thru 0x10FF. */
+static const struct pci_device_id virtio_pci_id_table[] = {
+	{ PCI_DEVICE(0x1af4, PCI_ANY_ID) },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, virtio_pci_id_table);
+
+static int virtio_pci_probe(struct pci_dev *pci_dev,
+			    const struct pci_device_id *id)
+{
+	return virtio_pci_legacy_probe(pci_dev, id);
+}
+
+static void virtio_pci_remove(struct pci_dev *pci_dev)
+{
+     virtio_pci_legacy_remove(pci_dev);
+}
+
+static struct pci_driver virtio_pci_driver = {
+	.name		= "virtio-pci",
+	.id_table	= virtio_pci_id_table,
+	.probe		= virtio_pci_probe,
+	.remove		= virtio_pci_remove,
+#ifdef CONFIG_PM_SLEEP
+	.driver.pm	= &virtio_pci_pm_ops,
+#endif
+};
+
+module_pci_driver(virtio_pci_driver);
diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c
index 2588252..6c76f0f 100644
--- a/drivers/virtio/virtio_pci_legacy.c
+++ b/drivers/virtio/virtio_pci_legacy.c
@@ -19,14 +19,6 @@
 
 #include "virtio_pci_common.h"
 
-/* Qumranet donated their vendor ID for devices 0x1000 thru 0x10FF. */
-static const struct pci_device_id virtio_pci_id_table[] = {
-	{ PCI_DEVICE(0x1af4, PCI_ANY_ID) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, virtio_pci_id_table);
-
 /* virtio config->get_features() implementation */
 static u64 vp_get_features(struct virtio_device *vdev)
 {
@@ -220,7 +212,7 @@ static const struct virtio_config_ops virtio_pci_config_ops = {
 };
 
 /* the PCI probing function */
-static int virtio_pci_probe(struct pci_dev *pci_dev,
+int virtio_pci_legacy_probe(struct pci_dev *pci_dev,
 			    const struct pci_device_id *id)
 {
 	struct virtio_pci_device *vp_dev;
@@ -300,7 +292,7 @@ out:
 	return err;
 }
 
-static void virtio_pci_remove(struct pci_dev *pci_dev)
+void virtio_pci_legacy_remove(struct pci_dev *pci_dev)
 {
 	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
 
@@ -312,15 +304,3 @@ static void virtio_pci_remove(struct pci_dev *pci_dev)
 	pci_disable_device(pci_dev);
 	kfree(vp_dev);
 }
-
-static struct pci_driver virtio_pci_driver = {
-	.name		= "virtio-pci",
-	.id_table	= virtio_pci_id_table,
-	.probe		= virtio_pci_probe,
-	.remove		= virtio_pci_remove,
-#ifdef CONFIG_PM_SLEEP
-	.driver.pm	= &virtio_pci_pm_ops,
-#endif
-};
-
-module_pci_driver(virtio_pci_driver);
-- 
MST

[PATCH 5/6] virtio_pci: add VIRTIO_PCI_NO_LEGACY

[Michael S. Tsirkin]

Add macro to disable all legacy register defines.
Helpful to make sure legacy macros don't leak
through into modern code.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/uapi/linux/virtio_pci.h | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/include/uapi/linux/virtio_pci.h b/include/uapi/linux/virtio_pci.h
index e5ec1ca..35b552c 100644
--- a/include/uapi/linux/virtio_pci.h
+++ b/include/uapi/linux/virtio_pci.h
@@ -41,6 +41,8 @@
 
 #include <linux/virtio_config.h>
 
+#ifndef VIRTIO_PCI_NO_LEGACY
+
 /* A 32-bit r/o bitmask of the features supported by the host */
 #define VIRTIO_PCI_HOST_FEATURES	0
 
@@ -67,16 +69,11 @@
  * a read-and-acknowledge. */
 #define VIRTIO_PCI_ISR			19
 
-/* The bit of the ISR which indicates a device configuration change. */
-#define VIRTIO_PCI_ISR_CONFIG		0x2
-
 /* MSI-X registers: only enabled if MSI-X is enabled. */
 /* A 16-bit vector for configuration changes. */
 #define VIRTIO_MSI_CONFIG_VECTOR        20
 /* A 16-bit vector for selected queue notifications. */
 #define VIRTIO_MSI_QUEUE_VECTOR         22
-/* Vector value used to disable MSI for queue */
-#define VIRTIO_MSI_NO_VECTOR            0xffff
 
 /* The remaining space is defined by each driver as the per-driver
  * configuration space */
@@ -94,4 +91,12 @@
 /* The alignment to use between consumer and producer parts of vring.
  * x86 pagesize again. */
 #define VIRTIO_PCI_VRING_ALIGN		4096
+
+#endif /* VIRTIO_PCI_NO_LEGACY */
+
+/* The bit of the ISR which indicates a device configuration change. */
+#define VIRTIO_PCI_ISR_CONFIG		0x2
+/* Vector value used to disable MSI for queue */
+#define VIRTIO_MSI_NO_VECTOR            0xffff
+
 #endif
-- 
MST

[PATCH 6/6] virtio: core support for config generation

[Michael S. Tsirkin]

virtio 1.0 spec says:

Drivers MUST NOT assume reads from fields greater than 32 bits wide are
atomic, nor are reads from multiple fields: drivers SHOULD read device
configuration space fields like so:
	u32 before, after;
	do {
		before = get_config_generation(device);
		// read config entry/entries.
		after = get_config_generation(device);
	} while (after != before);

Do exactly this, for transports that support it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/linux/virtio_config.h | 32 ++++++++++++++++++++++++++++----
 1 file changed, 28 insertions(+), 4 deletions(-)

diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index a61cd37..ca3ed78 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -19,6 +19,9 @@
  *	offset: the offset of the configuration field
  *	buf: the buffer to read the field value from.
  *	len: the length of the buffer
+ * @generation: config generation counter
+ *	vdev: the virtio_device
+ *	Returns the config generation counter
  * @get_status: read the status byte
  *	vdev: the virtio_device
  *	Returns the status byte
@@ -60,6 +63,7 @@ struct virtio_config_ops {
 		    void *buf, unsigned len);
 	void (*set)(struct virtio_device *vdev, unsigned offset,
 		    const void *buf, unsigned len);
+	u32 (*generation)(struct virtio_device *vdev);
 	u8 (*get_status)(struct virtio_device *vdev);
 	void (*set_status)(struct virtio_device *vdev, u8 status);
 	void (*reset)(struct virtio_device *vdev);
@@ -301,14 +305,33 @@ static inline u8 virtio_cread8(struct virtio_device *vdev, unsigned int offset)
 	return ret;
 }
 
+/* Read @count fields, @bytes each. */
+static inline void __virtio_cread_many(struct virtio_device *vdev,
+				       unsigned int offset,
+				       void *buf, size_t count, size_t bytes)
+{
+	u32 old, gen = vdev->config->generation ?
+		vdev->config->generation(vdev) : 0;
+	int i;
+
+	do {
+		old = gen;
+
+		for (i = 0; i < count; i++)
+			vdev->config->get(vdev, offset + bytes * i,
+					  buf + i * bytes, bytes);
+
+		gen = vdev->config->generation ?
+			vdev->config->generation(vdev) : 0;
+	} while (gen != old);
+}
+
+
 static inline void virtio_cread_bytes(struct virtio_device *vdev,
 				      unsigned int offset,
 				      void *buf, size_t len)
 {
-	int i;
-
-	for (i = 0; i < len; i++)
-		vdev->config->get(vdev, offset + i, buf + i, 1);
+	__virtio_cread_many(vdev, offset, buf, len, 1);
 }
 
 static inline void virtio_cwrite8(struct virtio_device *vdev,
@@ -352,6 +375,7 @@ static inline u64 virtio_cread64(struct virtio_device *vdev,
 {
 	u64 ret;
 	vdev->config->get(vdev, offset, &ret, sizeof(ret));
+	__virtio_cread_many(vdev, offset, &ret, 1, sizeof(ret));
 	return virtio64_to_cpu(vdev, (__force __virtio64)ret);
 }
 
-- 
MST

Re: [PATCH 6/6] virtio: core support for config generation

[Rusty Russell]

"Michael S. Tsirkin" <mst@redhat.com> writes:
> virtio 1.0 spec says:
>
> Drivers MUST NOT assume reads from fields greater than 32 bits wide are
> atomic, nor are reads from multiple fields: drivers SHOULD read device
> configuration space fields like so:
> 	u32 before, after;
> 	do {
> 		before = get_config_generation(device);
> 		// read config entry/entries.
> 		after = get_config_generation(device);
> 	} while (after != before);
>
> Do exactly this, for transports that support it.

>  static inline void virtio_cwrite8(struct virtio_device *vdev,
> @@ -352,6 +375,7 @@ static inline u64 virtio_cread64(struct virtio_device *vdev,
>  {
>  	u64 ret;
>  	vdev->config->get(vdev, offset, &ret, sizeof(ret));
> +	__virtio_cread_many(vdev, offset, &ret, 1, sizeof(ret));
>  	return virtio64_to_cpu(vdev, (__force __virtio64)ret);
>  }

The "vdev->config->get(vdev, offset, &ret, sizeof(ret));" should
be deleted.  Harmless if not, though.

Cheers,
Rusty.

Re: [PATCH 0/6] virtio 1.0 fixups, tweaks

[Rusty Russell]

"Michael S. Tsirkin" <mst@redhat.com> writes:
> Fixes a couple of minor compliance issues in new virtio 1.0 code.
> Plus, adds a couple of minor cleanups - not bugfixes,
> but seem safe enough for 3.19.

OK, I've applied these.

Thanks,
Rusty.

> Michael S. Tsirkin (6):
>   virtio: set VIRTIO_CONFIG_S_FEATURES_OK on restore
>   virtio_config: fix virtio_cread_bytes
>   virtio_pci_common.h: drop VIRTIO_PCI_NO_LEGACY
>   virtio_pci: move probe to common file
>   virtio_pci: add VIRTIO_PCI_NO_LEGACY
>   virtio: core support for config generation
>
>  drivers/virtio/virtio_pci_common.h |  7 +++----
>  include/linux/virtio_config.h      | 29 ++++++++++++++++++++++++++++-
>  include/uapi/linux/virtio_pci.h    | 15 ++++++++++-----
>  drivers/virtio/virtio.c            | 37 +++++++++++++++++++++++--------------
>  drivers/virtio/virtio_pci_common.c | 34 +++++++++++++++++++++++++++++++++-
>  drivers/virtio/virtio_pci_legacy.c | 24 ++----------------------
>  6 files changed, 99 insertions(+), 47 deletions(-)
>
> -- 
> MST