mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: ebiederm@xmission.com (Eric W. Biederman)
To: Michal Hocko <mhocko@suse.cz>
Cc: Li Zefan <lizefan@huawei.com>, Tejun Heo <tj@kernel.org>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	cgroups@vger.kernel.org, containers@lists.linux-foundation.org,
	linux-kernel@vger.kernel.org, kent.overstreet@gmail.com,
	Glauber Costa <glommer@gmail.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	David Rientjes <rientjes@google.com>
Subject: Re: memcg creates an unkillable task in 3.11-rc2
Date: Wed, 31 Jul 2013 15:09:16 -0700	[thread overview]
Message-ID: <87zjt2tm9f.fsf@xmission.com> (raw)
In-Reply-To: <20130731073726.GC30514@dhcp22.suse.cz> (Michal Hocko's message of "Wed, 31 Jul 2013 09:37:26 +0200")

Michal Hocko <mhocko@suse.cz> writes:

> [I am CCing David here as well]
>
> On Tue 30-07-13 09:37:46, Eric W. Biederman wrote:
>> Michal Hocko <mhocko@suse.cz> writes:
>> 
>> > On Tue 30-07-13 01:19:31, Eric W. Biederman wrote:
>> > [...]
>> >> Hmm. Looking farther I see what is going on. And it has nothing to do
>> >> with the freezer. (I have commented out that code and reproduced it
>> >> without the freezer to be doubly certain).
>> >> 
>> >> 
>> >> On the exit path exit_robust_list is triggering a page fault to fault a
>> >> page back in.  Which since we have no memory causes the exit path
>> >> to get stuck in mem_cgroup_handle_oom.
>> >
>> > Hmm, interesting. I assume the exit is caused by the SIGKILL, right?
>> > If yes, then why it hasn't coughed early in __mem_cgroup_try_charge
>> 
>> Interesting question.  This isn't the primary thread but we do send
>> SIGKILL to the secondary threads as well.
>> 
>> We definitely need those checks on both paths making my change valid.
>> 
>> Oh. Duh!  This is after we act on SIGKILL so SIGKILL is no longer
>> pending.
>
> Very well spotted Eric! What do you think about the following patch?
> I would have to check since when the exit path could trigger the fault
> but I guess this is worth stable backport.

It doesn't have a prayer of working.

You leave open the race of a fatal signal being received before we go to
sleep.

You don't handle a task that has processed the fatal signal and is in
PF_EXITING.  Which is what I experienced.

>From earlier comments about my code not being early enough I thought I
was going to see a patch in __mem_cgroup_try_change so that the bypass
case will kick in also for tasks in PF_EXITING.  You change actually
addresses things later in the code path than mine does.

I do like your summary of the problem.

Eric

> ---
> From 411408558f2858328ea25e69567e9a53a8314032 Mon Sep 17 00:00:00 2001
> From: Michal Hocko <mhocko@suse.cz>
> Date: Wed, 31 Jul 2013 08:48:54 +0200
> Subject: [PATCH] memcg: Do not hang on OOM when killed by userspace OOM
>
> Eric has reported that he can see task(s) stuck in memcg OOM handler
> regularly. The only way out is to
> 	echo 0 > $GROUP/memory.oom_controll
>
> His usecase is:
> - Setup a hierarchy with memory and the freezer
>   (disable kernel oom and have a process watch for oom).
> - In that memory cgroup add a process with one thread per cpu.
> - In one thread slowly allocate once per second I think it is 16M of ram
>   and mlock and dirty it (just to force the pages into ram and stay there).
> - When oom is achieved loop:
>   * attempt to freeze all of the tasks.
>   * if frozen send every task SIGKILL, unfreeze, remove the directory in
>     cgroupfs.
>
> Eric has then pinpointed the issue to be memcg specific.
>
> All tasks are sitting on the memcg_oom_waitq when memcg oom is disabled.
> Those that have received fatal signal will bypass the charge and should
> continue on their way out. The tricky part is that that exit path might
> trigger a page fault (e.g. exit_robust_list) thus the memcg charge
> while its memcg is still under OOM because nobody has released any
> charges. Unlike with the in-kernel OOM handler the exiting task doesn't
> get TIF_MEMDIE set so it doesn't shortcut charges and falls to the
> memcg OOM again without any way out of it as there are no fatal signals
> pending anymore.
>
> This patch sets the TIF_MEMDIE flag pro actively in mem_cgroup_handle_oom
> if the memcg is disabled after the task is woken up with fatal signal
> pending. This means that any further charges will be bypassed early in
> __mem_cgroup_try_charge and the task will have chance to exit finally.
>
> Strictly speaking we might mark also a task which hasn't been killed by
> userspace OOM handler but this is not harmful as the task is going away
> anyway and under-oom group would like to see it go as soon as possible.
>
> Reported-by: Eric W. Biederman <ebiederm@xmission.com>
> Debugged-by: Eric W. Biederman <ebiederm@xmission.com>
> Signed-off-by: Michal Hocko <mhocko@suse.cz>
> ---
>  mm/memcontrol.c | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> index d12ca6f..d4103b0 100644
> --- a/mm/memcontrol.c
> +++ b/mm/memcontrol.c
> @@ -2235,8 +2235,19 @@ static bool mem_cgroup_handle_oom(struct mem_cgroup *memcg, gfp_t mask,
>  
>  	mem_cgroup_unmark_under_oom(memcg);
>  
> -	if (test_thread_flag(TIF_MEMDIE) || fatal_signal_pending(current))
> +	if (test_thread_flag(TIF_MEMDIE))
>  		return false;
> +
> +	/*
> +	 * Userspace OOM killer might have killed this task but
> +	 * there is no way it could have set TIF_MEMDIE as well
> +	 * so we have to set it manually.
> +	 */
> +	if (fatal_signal_pending(current)) {
> +		if (memcg->oom_kill_disable)
> +			set_thread_flag(TIF_MEMDIE);
> +		return false;
> +	}
>  	/* Give chance to dying process */
>  	schedule_timeout_uninterruptible(1);
>  	return true;
> -- 
> 1.8.3.2

  parent reply	other threads:[~2013-07-31 22:09 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-23 17:47 [GIT PULL] cgroup changes for 3.11-rc2 Tejun Heo
2013-07-29  0:42 ` memcg creates an unkillable task in 3.2-rc2 Eric W. Biederman
2013-07-29  7:59   ` Michal Hocko
2013-07-29  8:54     ` Eric W. Biederman
2013-07-29  9:51       ` Michal Hocko
2013-07-29 10:21         ` Eric W. Biederman
2013-07-29 16:10         ` Tejun Heo
2013-07-29 17:03           ` Eric W. Biederman
2013-07-29 17:20             ` Tejun Heo
2013-07-29 18:06               ` Eric W. Biederman
2013-07-29 18:17               ` Michal Hocko
2013-07-29 18:13             ` Johannes Weiner
2013-07-29 18:52               ` Eric W. Biederman
2013-07-30  1:58             ` Li Zefan
2013-07-30  8:19               ` memcg creates an unkillable task in 3.11-rc2 Eric W. Biederman
2013-07-30 12:31                 ` Michal Hocko
2013-07-30 16:37                   ` Eric W. Biederman
2013-07-31  7:37                     ` Michal Hocko
2013-07-31 12:10                       ` Johannes Weiner
2013-07-31 22:09                       ` Eric W. Biederman [this message]
2013-08-01  9:06                         ` Michal Hocko
2013-09-05  9:56                           ` Michal Hocko
2013-09-06 18:09                             ` Eric W. Biederman
2013-09-09  8:31                               ` Michal Hocko
2013-07-30 16:28                 ` Eric W. Biederman
2013-09-26 23:41                   ` Fabio Kung
2013-09-27  0:35                     ` Eric W. Biederman
2013-11-12 16:00                     ` Michal Hocko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87zjt2tm9f.fsf@xmission.com \
    --to=ebiederm@xmission.com \
    --cc=cgroups@vger.kernel.org \
    --cc=containers@lists.linux-foundation.org \
    --cc=glommer@gmail.com \
    --cc=hannes@cmpxchg.org \
    --cc=kent.overstreet@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lizefan@huawei.com \
    --cc=mhocko@suse.cz \
    --cc=rientjes@google.com \
    --cc=tj@kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome