mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
To: Frank Li <Frank.li@nxp.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Chester Lin <chester62515@gmail.com>,
	Matthias Brugger <mbrugger@suse.com>,
	Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>,
	Larisa Grigore <larisa.grigore@nxp.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Lee Jones <lee@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Dong Aisheng <aisheng.dong@nxp.com>, Jacky Bai <ping.bai@nxp.com>,
	linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	NXP S32 Linux Team <s32@nxp.com>,
	Christophe Lizzi <clizzi@redhat.com>,
	Alberto Ruiz <aruizrui@redhat.com>,
	Enric Balletbo <eballetb@redhat.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	imx@lists.linux.dev
Subject: Re: [PATCH v5 3/7] arm64: dts: s32g: make pinctrl part of mfd node
Date: Mon, 4 Nov 2024 13:33:35 +0200	[thread overview]
Message-ID: <88fd2cba-081d-48e9-8733-4cb6eecaac9f@oss.nxp.com> (raw)
In-Reply-To: <ZyUcc5s6u9OzOoyq@lizhi-Precision-Tower-5810>

Hi Frank,

On 01/11/2024 20:22, Frank Li wrote:
> On Fri, Nov 01, 2024 at 10:06:09AM +0200, Andrei Stefanescu wrote:
>> SIUL2 is now represented as an mfd device. Therefore, the old
>> pinctrl node is deprecated. Move the pinctrl related properties
>> inside the new "nxp-siul2" node. The latter one is now used
>> to represent the mfd device.
> 
> Generally, dt team want you to keep both for sometime to keep
> back compatiblity.

Just to make sure I understand correctly, I will keep the previous pinctrl
node and have both the new siul2 node and the old pinctrl one, right?

Best regards,
Andrei

> 
> Frank
>>
>> Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
>> ---
>>  arch/arm64/boot/dts/freescale/s32g2.dtsi | 26 +++++++++++-------------
>>  arch/arm64/boot/dts/freescale/s32g3.dtsi | 26 +++++++++++-------------
>>  2 files changed, 24 insertions(+), 28 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
>> index fa054bfe7d5c..e14ce5503e1f 100644
>> --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
>> @@ -114,20 +114,18 @@ soc@0 {
>>  		#size-cells = <1>;
>>  		ranges = <0 0 0 0x80000000>;
>>
>> -		pinctrl: pinctrl@4009c240 {
>> -			compatible = "nxp,s32g2-siul2-pinctrl";
>> -				/* MSCR0-MSCR101 registers on siul2_0 */
>> -			reg = <0x4009c240 0x198>,
>> -				/* MSCR112-MSCR122 registers on siul2_1 */
>> -			      <0x44010400 0x2c>,
>> -				/* MSCR144-MSCR190 registers on siul2_1 */
>> -			      <0x44010480 0xbc>,
>> -				/* IMCR0-IMCR83 registers on siul2_0 */
>> -			      <0x4009ca40 0x150>,
>> -				/* IMCR119-IMCR397 registers on siul2_1 */
>> -			      <0x44010c1c 0x45c>,
>> -				/* IMCR430-IMCR495 registers on siul2_1 */
>> -			      <0x440110f8 0x108>;
>> +		siul2: siul2@4009c000 {
>> +			compatible = "nxp,s32g2-siul2";
>> +			reg = <0x4009c000 0x179c>,
>> +			      <0x44010000 0x17b0>;
>> +			reg-names = "siul20", "siul21";
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +			gpio-ranges = <&siul2 0 0 102>, <&siul2 112 112 79>;
>> +			gpio-reserved-ranges = <102 10>, <123 21>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
>>
>>  			jtag_pins: jtag-pins {
>>  				jtag-grp0 {
>> diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
>> index b4226a9143c8..fa43d036686f 100644
>> --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
>> @@ -171,20 +171,18 @@ soc@0 {
>>  		#size-cells = <1>;
>>  		ranges = <0 0 0 0x80000000>;
>>
>> -		pinctrl: pinctrl@4009c240 {
>> -			compatible = "nxp,s32g2-siul2-pinctrl";
>> -				/* MSCR0-MSCR101 registers on siul2_0 */
>> -			reg = <0x4009c240 0x198>,
>> -				/* MSCR112-MSCR122 registers on siul2_1 */
>> -			      <0x44010400 0x2c>,
>> -				/* MSCR144-MSCR190 registers on siul2_1 */
>> -			      <0x44010480 0xbc>,
>> -				/* IMCR0-IMCR83 registers on siul2_0 */
>> -			      <0x4009ca40 0x150>,
>> -				/* IMCR119-IMCR397 registers on siul2_1 */
>> -			      <0x44010c1c 0x45c>,
>> -				/* IMCR430-IMCR495 registers on siul2_1 */
>> -			      <0x440110f8 0x108>;
>> +		siul2: siul2@4009c000 {
>> +			compatible = "nxp,s32g3-siul2";
>> +			reg = <0x4009c000 0x179c>,
>> +			      <0x44010000 0x17b0>;
>> +			reg-names = "siul20", "siul21";
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +			gpio-ranges = <&siul2 0 0 102>, <&siul2 112 112 79>;
>> +			gpio-reserved-ranges = <102 10>, <123 21>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
>>
>>  			jtag_pins: jtag-pins {
>>  				jtag-grp0 {
>> --
>> 2.45.2
>>


  reply	other threads:[~2024-11-04 11:33 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-01  8:06 [PATCH v5 0/7] gpio: siul2-s32g2: add initial GPIO driver Andrei Stefanescu
2024-11-01  8:06 ` [PATCH v5 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module Andrei Stefanescu
2024-11-01 18:11   ` Frank Li
2024-11-04 11:11     ` Andrei Stefanescu
2024-11-02  8:42   ` Krzysztof Kozlowski
2024-11-04 11:21     ` Andrei Stefanescu
2024-11-01  8:06 ` [PATCH v5 2/7] mfd: nxp-siul2: add support for NXP SIUL2 Andrei Stefanescu
2024-11-01 17:18   ` kernel test robot
2024-11-01 18:20   ` Frank Li
2024-11-02  5:13   ` kernel test robot
2024-11-02  8:37   ` Dan Carpenter
2024-11-04 11:25     ` Andrei Stefanescu
2024-11-02  8:52   ` Krzysztof Kozlowski
2024-11-04 11:29     ` Andrei Stefanescu
2024-11-19  9:19       ` Krzysztof Kozlowski
2024-11-01  8:06 ` [PATCH v5 3/7] arm64: dts: s32g: make pinctrl part of mfd node Andrei Stefanescu
2024-11-01 18:22   ` Frank Li
2024-11-04 11:33     ` Andrei Stefanescu [this message]
2024-11-02  8:49   ` Krzysztof Kozlowski
2024-11-01  8:06 ` [PATCH v5 4/7] pinctrl: s32: convert the driver into an mfd cell Andrei Stefanescu
2024-11-01 11:53   ` Linus Walleij
2024-11-01 21:47   ` kernel test robot
2024-11-02  8:51   ` Krzysztof Kozlowski
2024-11-04 11:44     ` Andrei Stefanescu
2024-11-01  8:06 ` [PATCH v5 5/7] pinctrl: s32cc: change to "devm_pinctrl_register_and_init" Andrei Stefanescu
2024-11-01 11:54   ` Linus Walleij
2024-11-01  8:06 ` [PATCH v5 6/7] pinctrl: s32cc: add driver for GPIO functionality Andrei Stefanescu
2024-11-01 15:45   ` Markus Elfring
2024-11-04 11:45     ` Andrei Stefanescu
2024-11-01  8:06 ` [PATCH v5 7/7] MAINTAINERS: add MAINTAINER for NXP SIUL2 MFD driver Andrei Stefanescu
2024-11-01 11:56 ` [PATCH v5 0/7] gpio: siul2-s32g2: add initial GPIO driver Linus Walleij
2024-11-01 12:10   ` Andrei Stefanescu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=88fd2cba-081d-48e9-8733-4cb6eecaac9f@oss.nxp.com \
    --to=andrei.stefanescu@oss.nxp.com \
    --cc=Frank.li@nxp.com \
    --cc=Ghennadi.Procopciuc@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=aruizrui@redhat.com \
    --cc=brgl@bgdev.pl \
    --cc=chester62515@gmail.com \
    --cc=clizzi@redhat.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eballetb@redhat.com \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=larisa.grigore@nxp.com \
    --cc=lee@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mbrugger@suse.com \
    --cc=ping.bai@nxp.com \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=s32@nxp.com \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®