From: Dave Gerlach <d-gerlach@ti.com>
To: <sunil.m@techveda.org>, <viresh.kumar@linaro.org>
Cc: <rjw@rjwysocki.net>, <linux-kernel@vger.kernel.org>,
<linux-pm@vger.kernel.org>, <karthik@techveda.org>
Subject: Re: [PATCH v2] drivers: cpufreq: Fix sysfs duplicate filename creation for platform-device
Date: Tue, 19 Sep 2017 10:12:13 -0500 [thread overview]
Message-ID: <8a57f05a-598f-440e-f8d0-ddde5627d075@ti.com> (raw)
In-Reply-To: <1505762285-16161-1-git-send-email-sunil.m@techveda.org>
Hi,
On 09/18/2017 02:18 PM, sunil.m@techveda.org wrote:
> From: Suniel Mahesh <sunil.m@techveda.org>
>
> ti-cpufreq and cpufreq-dt-platdev drivers are registering platform-device
> with same name "cpufreq-dt" using platform_device_register_*() routines.
> This is leading to build warnings appended below.
>
> Providing hardware information to OPP framework along with the platform-
> device creation should be done by ti-cpufreq driver before cpufreq-dt
> driver comes into place.
>
> This patch add's TI SoC am33xx (uses opp-v2 property) in the blacklist of
> devices in cpufreq-dt-platform driver to avoid creating platform-device
> twice and remove build warnings (suggested by Viresh Kumar).
This looks good to me, but this also affects "ti,am43" and "ti,dra7" platforms,
care to add those to the blacklist as well with this patch? Thanks.
Regards,
Dave
>
> [ 2.370167] ------------[ cut here ]------------
> [ 2.375087] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x58/0x78
> [ 2.383112] sysfs: cannot create duplicate filename '/devices/platform/cpufreq-dt'
> [ 2.391219] Modules linked in:
> [ 2.394506] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-next-20170912 #1
> [ 2.402006] Hardware name: Generic AM33XX (Flattened Device Tree)
> [ 2.408437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14)
> [ 2.416568] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0)
> [ 2.424165] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104)
> [ 2.431488] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44)
> [ 2.439351] [<c01374d0>] (warn_slowpath_fmt) from [<c03459d0>] (sysfs_warn_dup+0x58/0x78)
> [ 2.447938] [<c03459d0>] (sysfs_warn_dup) from [<c0345ab8>] (sysfs_create_dir_ns+0x80/0x98)
> [ 2.456719] [<c0345ab8>] (sysfs_create_dir_ns) from [<c082c554>] (kobject_add_internal+0x9c/0x2d4)
> [ 2.466124] [<c082c554>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c)
> [ 2.474712] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c)
> [ 2.482489] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220)
> [ 2.491085] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118)
> [ 2.501305] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c)
> [ 2.511253] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170)
> [ 2.519838] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4)
> [ 2.528974] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110)
> [ 2.537565] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c)
> [ 2.545981] ---[ end trace 2fc00e213c13ab20 ]---
> [ 2.551051] ------------[ cut here ]------------
> [ 2.555931] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x254/0x2d4
> [ 2.564578] kobject_add_internal failed for cpufreq-dt with -EEXIST, don't try to register
> things with the same name in the same directory.
> [ 2.577977] Modules linked in:
> [ 2.581261] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.13.0-next-20170912 #1
> [ 2.590013] Hardware name: Generic AM33XX (Flattened Device Tree)
> [ 2.596437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14)
> [ 2.604573] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0)
> [ 2.612172] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104)
> [ 2.619494] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44)
> [ 2.627362] [<c01374d0>] (warn_slowpath_fmt) from [<c082c70c>] (kobject_add_internal+0x254/0x2d4)
> [ 2.636666] [<c082c70c>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c)
> [ 2.645255] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c)
> [ 2.653027] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220)
> [ 2.661615] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118)
> [ 2.671833] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c)
> [ 2.681779] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170)
> [ 2.690377] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4)
> [ 2.699510] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110)
> [ 2.708106] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c)
> [ 2.716217] ---[ end trace 2fc00e213c13ab21 ]---
>
> Fixes: edeec420de24 ("cpufreq: dt-cpufreq: platdev Automatically create device with OPP v2")
> Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
> ---
> Changes for v2:
> - The approach (as a result patch decsription) was changed as per
> inputs given by Viresh.
> - Patch was compile tested and built(ARCH=arm) on next-20170918.
> ---
> Note:
> - Patch was hardware tested on AM335x SOC based board.
> - cpufreq-dt driver got probed and entries related to Dynamic Voltage
> and Frequency scaling were created in
> sysfs @ sys/devices/system/cpu/cpu0/cpufreq.
> - No build/run-time issues reported.
> ---
> drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index a020da7..61fe7ee 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -106,6 +106,7 @@
> * platforms using "operating-points-v2" property.
> */
> static const struct of_device_id blacklist[] __initconst = {
> + { .compatible = "ti,am33xx", },
> { }
> };
>
>
next prev parent reply other threads:[~2017-09-19 15:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-16 18:34 [PATCH] " sunil.m
2017-09-18 1:15 ` Viresh Kumar
2017-09-18 16:59 ` Suniel Mahesh
2017-09-18 19:18 ` [PATCH v2] " sunil.m
2017-09-19 15:12 ` Dave Gerlach [this message]
2017-09-19 22:36 ` Viresh Kumar
2017-09-20 4:16 ` Suniel Mahesh
2017-09-21 13:39 ` [PATCH v3] " sunil.m
2017-09-21 17:53 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8a57f05a-598f-440e-f8d0-ddde5627d075@ti.com \
--to=d-gerlach@ti.com \
--cc=karthik@techveda.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=sunil.m@techveda.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®