mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Akira Yokosawa <akiyks@gmail.com>
To: "Paul E. McKenney" <paulmck@kernel.org>
Cc: linux-kernel@vger.kernel.org,
	"Michael S. Tsirkin" <mst@redhat.com>,
	Akira Yokosawa <akiyks@gmail.com>
Subject: Re: data dependency naming inconsistency
Date: Fri, 15 Oct 2021 07:48:09 +0900	[thread overview]
Message-ID: <8a9ea500-8f8c-129a-2974-4bdda65dbf64@gmail.com> (raw)
In-Reply-To: <d253958f-b3d7-67c1-4cf6-38f184adabd6@gmail.com>

On Thu, 14 Oct 2021 23:29:43 +0900, Akira Yokosawa wrote:
> [-CC akys: my 2nd address]
> On Thu, 14 Oct 2021 01:37:17 -0400, Michael S. Tsirkin wrote:
>> On Thu, Oct 14, 2021 at 01:43:24PM +0900, Akira Yokosawa wrote:
>>> On Mon, 11 Oct 2021 07:07:08 -0400, Michael S. Tsirkin wrote:
>>>> Hello Paul, all!
>>>
>>> Hello Michael,
>>>
>>> I thought Paul would respond soon, but looks like he has not
>>> done so.

This is because Michael used Paul's old email address.

Forwarding to his current address.

Paul, you can see the thread at the lore archive:
https://lore.kernel.org/lkml/20211011064233-mutt-send-email-mst@kernel.org/T/

        Thanks, Akira

>>> So, I'm trying to give some hint to your findings.
>>>
>>>> I've been reading with interest Paul's posts about Rust interactions with LKMM
>>>> https://paulmck.livejournal.com/63316.html
>>>> and in particular it states:
>>>> 		A data dependency involves a load whose return value directly or
>>>> 	indirectly determine the value stored by a later store, which results in
>>>> 	the load being ordered before the store.
>>>>
>>>> This matches the perf book:
>>>> 	A data dependency occurs when the value returned by
>>>> 	a load instruction is used to compute the data stored by
>>>> 	a later store instruction.
>>>
>>> You might likely be aware, but these concern "data dependency",
>>> not a _barrier_.
>>>
>>>>
>>>> however, memory-barriers.txt states:
>>>>
>>>>      A data dependency barrier is a partial ordering on interdependent loads
>>>>      only; it is not required to have any effect on stores, independent loads
>>>>      or overlapping loads.
>>>>
>>>> It also says:
>>>> 	A data-dependency barrier is not required to order dependent writes
>>>> 	because the CPUs that the Linux kernel supports don't do writes
>>>> 	until they are certain (1) that the write will actually happen, (2)
>>>> 	of the location of the write, and (3) of the value to be written.
>>>
>>> These concern the historic "data-dependency barrier", or
>>> [smp_]read_barrier_depends(), which existed until Linux kernel v4.14.
> 
> Ah... I should have said ", which existed prior to Linux kernel v4.15".
> This invited off-by-one error below...
> 
>>>
>>>>
>>>> so the result it the same: writes are ordered without a barrier,
>>>> reads are ordered by a barrier.
>>>>
>>>> However, it would seem that a bit more consistency in naming won't
>>>> hurt.
>>>
>>> So, I don't think the historic term of "data-dependency barrier"
>>> can be changed.
>>>
>>> I guess the right approach would be to further de-emphasize
>>> "data-dependency barrier"/"data dependency barrier" in
>>> memory-barriers.txt.
>>>
>>> Rewrite by commit 8ca924aeb4f2 ("Documentation/barriers: Remove
>>> references to [smp_]read_barrier_depends()") did some of such
>>> changes, but it failed to update the introductory section of
>>> "VARIETIES OF MEMORY BARRIER".
>>> The part Michael quoted above belongs to it.
>>> I don't think it has any merit keeping it around.
>>>
>>> Also, there remain a couple of ascii-art diagrams concerning
>>> <data dependency barrier> in the first part of "EXAMPLES OF MEMORY
>>> BARRIER SEQUENCES" section, which, I think, can be removed as well.
>>>
>>> Hope this helps clarify the circumstances.
>>
>> It does, thanks! It might be worth adding a sentence along the lines of
>>
>> "NB: a data dependency barrier is distinct from a data dependency: it's
>> a barrier that used to be required in the presence of a data dependency.
>> Since v4.14 Linux no longer offers an API for a data dependency barrier.
> 
>   Since v4.15
> 
>> Instead, using READ_ONCE is sufficient for ordering in the presence of a
>> data dependency".
> 
> 
> Maybe.
> 
> But I'm more inclined to get rid of remaining contents related to the
> "data dependency barrier".
> 
>         Thanks, Akira
> 
>>
>>
>>> Paul, what is your take on the naming of "data dependency"/
>>> "data dependency barrier"?
>>>
>>>         Thanks, Akira
>>>
>>>>
>>>> Thanks,
>>>>
>>>> -- 
>>>> MST
>>

  parent reply	other threads:[~2021-10-14 22:48 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-11 11:07 Michael S. Tsirkin
2021-10-14  4:43 ` Akira Yokosawa
2021-10-14  5:37   ` Michael S. Tsirkin
2021-10-14 14:29     ` Akira Yokosawa
2021-10-14 16:06       ` Michael S. Tsirkin
2021-10-14 22:48       ` Akira Yokosawa [this message]
2021-10-14 23:06         ` Paul E. McKenney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8a9ea500-8f8c-129a-2974-4bdda65dbf64@gmail.com \
    --to=akiyks@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=paulmck@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome