Re: [PATCH v2 2/4] mfd: intel-m10-bmc: Simplify the legacy version reg definition

[Tom Rix <trix@redhat.com>]

On 1/25/21 10:50 PM, Xu Yilun wrote:
> The version register is the only one in the legacy I/O space to be
> accessed, so it is not necessary to define the legacy base & version
> register offset. A direct definition of the legacy version register
> address would be fine.
>
> Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> ---
>  drivers/mfd/intel-m10-bmc.c       | 12 +++++-------
>  include/linux/mfd/intel-m10-bmc.h |  2 +-
>  2 files changed, 6 insertions(+), 8 deletions(-)

Thanks for adding M10BMC_LEGACY_BUILD_VER

Reviewed-by: Tom Rix <trix@redhat.com>

> diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc.c
> index b84579b..aad86f0 100644
> --- a/drivers/mfd/intel-m10-bmc.c
> +++ b/drivers/mfd/intel-m10-bmc.c
> @@ -74,16 +74,14 @@ static int check_m10bmc_version(struct intel_m10bmc *ddata)
>  
>  	/*
>  	 * This check is to filter out the very old legacy BMC versions,
> -	 * M10BMC_LEGACY_SYS_BASE is the offset to this old block of mmio
> -	 * registers. In the old BMC chips, the BMC version info is stored
> -	 * in this old version register (M10BMC_LEGACY_SYS_BASE +
> -	 * M10BMC_BUILD_VER), so its read out value would have not been
> -	 * LEGACY_INVALID (0xffffffff). But in new BMC chips that the
> +	 * 0x300400 is the offset to this old block of mmio registers. In the
> +	 * old BMC chips, the BMC version info is stored in this old version
> +	 * register (0x300400 + 0x68), so its read out value would have not
> +	 * been LEGACY_INVALID (0xffffffff). But in new BMC chips that the
>  	 * driver supports, the value of this register should be
>  	 * LEGACY_INVALID.
>  	 */
> -	ret = m10bmc_raw_read(ddata,
> -			      M10BMC_LEGACY_SYS_BASE + M10BMC_BUILD_VER, &v);
> +	ret = m10bmc_raw_read(ddata, M10BMC_LEGACY_BUILD_VER, &v);
>  	if (ret)
>  		return -ENODEV;
>  
> diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
> index 06da62c..99f44b1 100644
> --- a/include/linux/mfd/intel-m10-bmc.h
> +++ b/include/linux/mfd/intel-m10-bmc.h
> @@ -9,7 +9,7 @@
>  
>  #include <linux/regmap.h>
>  
> -#define M10BMC_LEGACY_SYS_BASE		0x300400
> +#define M10BMC_LEGACY_BUILD_VER		0x300468
>  #define M10BMC_SYS_BASE			0x300800
>  #define M10BMC_MEM_END			0x1fffffff
>