Re: [PATCH 2/2] gpio: realtek-otto: add rtl9607 support

[Sander Vanheule <sander@svanheule.net>]

Hi,

On Thu, 2026-03-05 at 19:54 +0000, adilov wrote:
> On 2026-03-05 19:04, Sander Vanheule wrote:
> > On Thu, 2026-03-05 at 21:11 +0500, Rustam Adilov wrote:,
> > > +	{
> > > +		.compatible = "realtek,rtl9607-gpio",
> > > +		.data = (void *)GPIO_PORTS_REVERSED,
> > > +	},
> > If I'm not mistaken, this SoC has a MIPS InterAptiv CPU like the 
> > RTL931x SoC
> > series. Were you able to validate that the interrupts are functioning 
> > as
> > expected?
> > 
> > Best,
> > Sander
> 
> Hi Sander,
> 
> Yes, this is correct. I played around with gpio-keys in OpenWrt (though 
> it
> has its own gpio-button-hotplug but it should not change things) and can
> verify that button presses and releases are working. I think this should
> confirm that interrupts are functional.

Thanks for the info. I was mainly wondering because there seemed to be some
initial confusion [1] about the port order. If you get the order wrong, you
would be getting spurious interrupts.

[1] https://forum.openwrt.org/t/240741/25

If the order is correct, you should see the key GPIO interrupt increase in
/proc/interrupts. So, assuming that's the case:

Reviewed-by: Sander Vanheule <sander@svanheule.net>

Best,
Sander