Re: [PATCH v7 0/2] Add support for Layerscape external interrupt lines

[Marc Zyngier <maz@kernel.org>]

On 2019-11-12 11:27, Rasmus Villemoes wrote:
> On 11/11/2019 11.24, Marc Zyngier wrote:
>> On 2019-11-07 13:30, Rasmus Villemoes wrote:
>
>>> Rasmus Villemoes (2):
>>>   dt/bindings: Add bindings for Layerscape external irqs
>>>   irqchip: add support for Layerscape external interrupt lines
>>>
>>>  .../interrupt-controller/fsl,ls-extirq.txt    |  49 +++++
>>>  drivers/irqchip/Kconfig                       |   4 +
>>>  drivers/irqchip/Makefile                      |   1 +
>>>  drivers/irqchip/irq-ls-extirq.c               | 197 
>>> ++++++++++++++++++
>>>  4 files changed, 251 insertions(+)
>>>  create mode 100644
>>>
>>> 
>>> Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
>>>  create mode 100644 drivers/irqchip/irq-ls-extirq.c
>>
>> Applied to irqchip-next.
>
> Thanks! Can I assume that branch doesn't get rebased so 87cd38dfd9e6 
> is
> a stable SHA1? I want to send a patch adding the node to 
> ls1021a.dtsi,
> and I hope not to have to wait another release cycle.

I usually try to avoid rebasing it, unless something really bad shows 
up.

Now, just adding a node to a DT shouldn't break anything, right? You
should be able to do that change and get things working magically once
this code hits mainline.

Or am I missing something?

         M.
-- 
Jazz is not dead. It just smells funny...