Re: [PATCH v2] arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4

[AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>]

Il 15/04/25 10:07, Frank Wunderlich ha scritto:
> Am 15. April 2025 09:36:43 MESZ schrieb AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
>> Il 14/04/25 14:32, Daniel Golle ha scritto:
>>> On Mon, Apr 14, 2025 at 11:27:23AM +0200, AngeloGioacchino Del Regno wrote:
>>>> Il 12/04/25 12:21, Frank Wunderlich ha scritto:
>>>>> From: Frank Wunderlich <frank-w@public-files.de>
>>>>>
>>>>> Sinovoip has released other variants of Bananapi-R4 board.
>>>>> The known changes affecting only the LAN SFP+ slot which is replaced
>>>>> by a 2.5G phy with optional PoE.
>>>>>
>>>>> Just move the common parts to a new dtsi and keep differences (only
>>>>> i2c for lan-sfp) in dts.
> 
>>>> This should at least have some different compatible, if not probably also a
>>>> different model string - as it's a different device.
>>>>
>>>> 	compatible = "bananapi,bpi-r4-2g5", "bananapi,bpi-r4", "mediatek,mt7988a";
>>>
>>> Imho it doesn't make sense to declare compatibility with the
>>> "bananapi,bpi-r4" as the "bananapi,bpi-r4-2g5" is NOT compatible with the
>>> "bananapi,bpi-r4". It's a different board and using firmware meant for the
>>> "bananapi,bpi-r4-2g5" on the "bananapi,bpi-r4" (or vice versa) will result
>>> in a non-working Ethernet port.
>>>
>>
>> Is this device a BananaPi R4 variant, or is it a completely different device?
> 
> The only difference is that sfp-lan is replaced by RJ45 socket with mt7988 internal phy.
> 

Perfect, then:
  - The only difference is one routing
    - The base board is the same
    - Same hw project
      - The two machines are compatible with each other
        ...bar one difference

...then the compatibles shall be as I said before :-)

>> If this is a completely different device, then it's not even a BananaPi R4,
>> otherwise this is compatible with BananaPi R4, with a small variation :-)
> 
> Sinovoip now announces a R4Pro with some more changes (e.g. an external 2.5g switch),but we have no detailed shematic yet. It looks they also plan a R4lite which is based on different SoC (afair mt7987),but this is for sure different device (and so not using this bpi-r4.dtsi).

In that case, R4Lite shall not be compatible with R4, as the name may be the
same, but in practice it's a different machine.

> 
> But basicly all are named BPi-R4. I guess R4Pro will also get own dts as too much changed.

If R4pro is a redesign of the R4 board, that would not be compatible, as it
would not be the same base design; otherwise, I'm sure you have well understood
how it works for the compatibles, anyway :D

Cheers!

> 
>> Cheers,
>> Angelo
> 
> 
> regards Frank