Re: [PATCH v6 2/3] arm64: dts: qcom: qcs8300: Add CCI definitions

[Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>]

On 11/26/25 10:10, Vikram Sharma wrote:
> From: Nihal Kumar Gupta <quic_nihalkum@quicinc.com>
> 
> Qualcomm QCS8300 SoC contains three Camera Control Interface (CCI).
> Compared to Lemans, the key difference is in SDA/SCL GPIO assignments
> and number of CCIs.
> 
> Signed-off-by: Nihal Kumar Gupta <quic_nihalkum@quicinc.com>
> Co-developed-by: Ravi Shankar <quic_rshankar@quicinc.com>
> Signed-off-by: Ravi Shankar <quic_rshankar@quicinc.com>
> Co-developed-by: Vishal Verma <quic_vishverm@quicinc.com>
> Signed-off-by: Vishal Verma <quic_vishverm@quicinc.com>
> Co-developed-by: Suresh Vankadara <quic_svankada@quicinc.com>
> Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> ---
>   arch/arm64/boot/dts/qcom/monaco.dtsi | 345 +++++++++++++++++++++++++++
>   1 file changed, 345 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
> index 774255c3f6fc..7c575e1c5e10 100644
> --- a/arch/arm64/boot/dts/qcom/monaco.dtsi
> +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
> @@ -4776,6 +4776,117 @@ videocc: clock-controller@abf0000 {
>   			#power-domain-cells = <1>;
>   		};
>   
> +		cci0: cci@ac13000 {
> +			compatible = "qcom,qcs8300-cci", "qcom,msm8996-cci";
> +			reg = <0x0 0x0ac13000 0x0 0x1000>;
> +
> +			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
> +
> +			clocks = <&camcc CAM_CC_CPAS_AHB_CLK>,
> +				 <&camcc CAM_CC_CCI_0_CLK>;
> +			clock-names = "cpas_ahb",
> +				      "cci";
> +
> +			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
> +
> +			pinctrl-0 = <&cci0_0_default &cci0_1_default>;
> +			pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
> +			pinctrl-names = "default", "sleep";
> +
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			status = "disabled";
> +
> +			cci0_i2c0: i2c-bus@0 {
> +				reg = <0>;
> +				clock-frequency = <1000000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +
> +			cci0_i2c1: i2c-bus@1 {
> +				reg = <1>;
> +				clock-frequency = <1000000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +		};
> +
> +		cci1: cci@ac14000 {
> +			compatible = "qcom,qcs8300-cci", "qcom,msm8996-cci";
> +			reg = <0x0 0x0ac14000 0x0 0x1000>;
> +
> +			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
> +
> +			clocks = <&camcc CAM_CC_CPAS_AHB_CLK>,
> +				 <&camcc CAM_CC_CCI_1_CLK>;
> +			clock-names = "cpas_ahb",
> +				      "cci";
> +
> +			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
> +
> +			pinctrl-0 = <&cci1_0_default &cci1_1_default>;
> +			pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
> +			pinctrl-names = "default", "sleep";
> +
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			status = "disabled";
> +
> +			cci1_i2c0: i2c-bus@0 {
> +				reg = <0>;
> +				clock-frequency = <1000000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +
> +			cci1_i2c1: i2c-bus@1 {
> +				reg = <1>;
> +				clock-frequency = <1000000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +		};
> +
> +		cci2: cci@ac15000 {
> +			compatible = "qcom,qcs8300-cci", "qcom,msm8996-cci";
> +			reg = <0x0 0x0ac15000 0x0 0x1000>;
> +
> +			interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
> +
> +			clocks = <&camcc CAM_CC_CPAS_AHB_CLK>,
> +				 <&camcc CAM_CC_CCI_2_CLK>;
> +			clock-names = "cpas_ahb",
> +				      "cci";
> +
> +			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
> +
> +			pinctrl-0 = <&cci2_0_default &cci2_1_default>;
> +			pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
> +			pinctrl-names = "default", "sleep";
> +
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			status = "disabled";
> +
> +			cci2_i2c0: i2c-bus@0 {
> +				reg = <0>;
> +				clock-frequency = <1000000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +
> +			cci2_i2c1: i2c-bus@1 {
> +				reg = <1>;
> +				clock-frequency = <1000000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +		};
> +
>   		camss: isp@ac78000 {
>   			compatible = "qcom,qcs8300-camss";
>   
> @@ -5071,6 +5182,240 @@ tlmm: pinctrl@f100000 {
>   			#interrupt-cells = <2>;
>   			wakeup-parent = <&pdc>;
>   
> +			cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
> +				pins = "gpio73";
> +				function = "gpio";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam0_default: cam0-default-state {
> +				pins = "gpio67";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam1_avdd_2v8_en_default: cam1-avdd-2v8-en-state {
> +				pins = "gpio74";
> +				function = "gpio";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam1_default: cam1-default-state {
> +				pins = "gpio68";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};

MCLK pad function declatarions has nothing in common with the CCI, thus it
should be split into a separate commit.

> +
> +			cam2_avdd_2v8_en_default: cam2-avdd-2v8-en-state {
> +				pins = "gpio75";
> +				function = "gpio";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};

All declarations of GPIOs to enable regulators shall be moved to a board
specific .dts file.

-- 
Best wishes,
Vladimir