mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH net-next] dt-bindings: net: Use consistent indentation in the example
@ 2026-09-13 12:29 Krzysztof Kozlowski
  2026-09-14  9:14 ` Claudiu Manoil
  0 siblings, 1 reply; 3+ messages in thread
From: Krzysztof Kozlowski @ 2026-09-13 12:29 UTC (permalink / raw)
  To: Rob Clark, Dmitry Baryshkov, Abhinav Kumar, Jessica Zhang,
	Sean Paul, Marijn Suijten, David Airlie, Simona Vetter,
	Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Justin Chen, Florian Fainelli,
	Andrew Lunn, David S. Miller, Eric Dumazet, Jakub Kicinski,
	Paolo Abeni, Hans Ulli Kroll, Linus Walleij,
	Clément Léger, Vladimir Oltean, Heiner Kallweit,
	Russell King, Kunihiko Hayashi, Masami Hiramatsu, Felix Fietkau,
	Lorenzo Bianconi, Ryder Lee, Shayne Chen, Sean Wang,
	Johannes Berg, Matthias Brugger, AngeloGioacchino Del Regno,
	Jeff Johnson, Richard Cochran, Geert Uytterhoeven, Magnus Damm,
	Yongxing Mou, Robert Foss, Abel Vesa, G. Jaya Kumaran,
	Claudiu Manoil, Alexandre Belloni, Alex Elder,
	Siddharth Vadapalli, Roger Quadros, linux-arm-msm, dri-devel,
	freedreno, devicetree, linux-kernel, bcm-kernel-feedback-list,
	netdev, linux-arm-kernel, linux-renesas-soc, linux-wireless,
	linux-mediatek, ath10k
  Cc: Krzysztof Kozlowski

Correct indentation in the examples to consistent 2- or 4-spaces
indentation to fix dt-check-style warnings ("example 0
[indent-consistent] indent mismatch ...").  Preferred is 4-spaces, but
re-indenting entire example just for that is too much churn.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 .../bindings/net/brcm,asp-v2.0.yaml           |  2 +-
 .../bindings/net/cortina,gemini-ethernet.yaml | 52 ++++++--------
 .../bindings/net/dsa/renesas,rzn1-a5psw.yaml  |  4 +-
 .../bindings/net/intel,dwmac-plat.yaml        |  6 +-
 .../devicetree/bindings/net/mdio-gpio.yaml    | 16 ++---
 .../bindings/net/mscc,vsc7514-switch.yaml     |  8 +--
 .../devicetree/bindings/net/qcom,ipa.yaml     | 10 +--
 .../bindings/net/realtek,rtl82xx.yaml         |  6 +-
 .../bindings/net/socionext,uniphier-ave4.yaml | 32 ++++-----
 .../bindings/net/ti,cpsw-switch.yaml          | 70 +++++++++----------
 .../bindings/net/wireless/mediatek,mt76.yaml  | 32 ++++-----
 .../bindings/net/wireless/qcom,ath10k.yaml    |  2 +-
 12 files changed, 114 insertions(+), 126 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
index a3db6d594c8c..7fcc564e820c 100644
--- a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
@@ -123,7 +123,7 @@ examples:
             phy0: ethernet-phy@1 {
                 reg = <1>;
             };
-       };
+        };
 
         mdio@ce14 {
             compatible = "brcm,asp-v2.1-mdio";
diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
index f0b5bea2458d..da9bc170cd54 100644
--- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
@@ -87,18 +87,6 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/clock/cortina,gemini-clock.h>
     #include <dt-bindings/reset/cortina,gemini-reset.h>
-    mdio0: mdio {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      phy0: ethernet-phy@1 {
-        reg = <1>;
-        device_type = "ethernet-phy";
-      };
-      phy1: ethernet-phy@3 {
-        reg = <3>;
-        device_type = "ethernet-phy";
-      };
-    };
 
     ethernet@60000000 {
         compatible = "cortina,gemini-ethernet";
@@ -110,28 +98,28 @@ examples:
         ranges;
 
         gmac0: ethernet-port@0 {
-                compatible = "cortina,gemini-ethernet-port";
-                reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
-                      <0x6000a000 0x2000>; /* Port 0 GMAC */
-                interrupt-parent = <&intcon>;
-                interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-                resets = <&syscon GEMINI_RESET_GMAC0>;
-                clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
-                clock-names = "PCLK";
-                phy-mode = "rgmii";
-                phy-handle = <&phy0>;
+            compatible = "cortina,gemini-ethernet-port";
+            reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+                  <0x6000a000 0x2000>; /* Port 0 GMAC */
+            interrupt-parent = <&intcon>;
+            interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&syscon GEMINI_RESET_GMAC0>;
+            clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+            clock-names = "PCLK";
+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
         };
 
         gmac1: ethernet-port@1 {
-                compatible = "cortina,gemini-ethernet-port";
-                reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
-                      <0x6000e000 0x2000>; /* Port 1 GMAC */
-                interrupt-parent = <&intcon>;
-                interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-                resets = <&syscon GEMINI_RESET_GMAC1>;
-                clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
-                clock-names = "PCLK";
-                phy-mode = "rgmii";
-                phy-handle = <&phy1>;
+            compatible = "cortina,gemini-ethernet-port";
+            reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+                  <0x6000e000 0x2000>; /* Port 1 GMAC */
+            interrupt-parent = <&intcon>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&syscon GEMINI_RESET_GMAC1>;
+            clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+            clock-names = "PCLK";
+            phy-mode = "rgmii";
+            phy-handle = <&phy1>;
         };
     };
diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
index ea285ef3e64f..fab6aa6237e9 100644
--- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -127,8 +127,8 @@ examples:
                 phy-mode = "internal";
 
                 fixed-link {
-                  speed = <1000>;
-                  full-duplex;
+                    speed = <1000>;
+                    full-duplex;
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index 62c1da36a2b5..d1522216d32b 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -91,9 +91,9 @@ examples:
         snps,tx-queues-to-use = <2>;
         snps,tx-sched-wrr;
         queue0 {
-           snps,weight = <0x10>;
-           snps,dcb-algorithm;
-           snps,priority = <0x0>;
+            snps,weight = <0x10>;
+            snps,dcb-algorithm;
+            snps,priority = <0x0>;
         };
 
         queue1 {
diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
index eb4171a1940e..36e51aaae9c0 100644
--- a/Documentation/devicetree/bindings/net/mdio-gpio.yaml
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
@@ -45,13 +45,13 @@ examples:
     };
 
     mdio0: mdio {
-      compatible = "virtual,mdio-gpio";
-      #address-cells = <1>;
-      #size-cells = <0>;
-      gpios = <&qe_pio_a 11>,
-              <&qe_pio_c 6>;
-      ethphy0: ethernet-phy@0 {
-        reg = <0>;
-      };
+        compatible = "virtual,mdio-gpio";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpios = <&qe_pio_a 11>,
+                <&qe_pio_c 6>;
+        ethphy0: ethernet-phy@0 {
+            reg = <0>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
index 86a9c3fc76c8..d825130b54b4 100644
--- a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
+++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
@@ -197,10 +197,10 @@ examples:
             <0x71040000 0x10000>,
             <0x71050000 0x10000>,
             <0x71060000 0x10000>;
-            reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
-            "port2", "port3", "port4", "port5", "port6",
-            "port7", "port8", "port9", "port10", "qsys",
-            "ana", "s0", "s1", "s2";
+      reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+                  "port2", "port3", "port4", "port5", "port6",
+                  "port7", "port8", "port9", "port10", "qsys",
+                  "ana", "s0", "s1", "s2";
 
       ethernet-ports {
         #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 68ec76fe4473..38e3830512fe 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -246,14 +246,14 @@ examples:
         qcom,remote-pid = <5>;
 
         ipa_smp2p_out: ipa-ap-to-modem {
-                qcom,entry-name = "ipa";
-                #qcom,smem-state-cells = <1>;
+            qcom,entry-name = "ipa";
+            #qcom,smem-state-cells = <1>;
         };
 
         ipa_smp2p_in: ipa-modem-to-ap {
-                qcom,entry-name = "ipa";
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            qcom,entry-name = "ipa";
+            interrupt-controller;
+            #interrupt-cells = <2>;
         };
     };
 
diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
index 45033c31a2d5..07b39ef1fc62 100644
--- a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
+++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
@@ -91,8 +91,8 @@ examples:
         #size-cells = <0>;
 
         ethphy1: ethernet-phy@1 {
-                reg = <1>;
-                realtek,clkout-disable;
-                realtek,aldps-enable;
+            reg = <1>;
+            realtek,clkout-disable;
+            realtek,aldps-enable;
         };
     };
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
index 4eb63b303cff..8c8622160abb 100644
--- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
@@ -121,22 +121,22 @@ examples:
   - |
     ether: ethernet@65000000 {
         compatible = "socionext,uniphier-ld20-ave4";
-                reg = <0x65000000 0x8500>;
-                interrupts = <0 66 4>;
-                phy-mode = "rgmii";
-                phy-handle = <&ethphy>;
-                clock-names = "ether";
-                clocks = <&sys_clk 6>;
-                reset-names = "ether";
-                resets = <&sys_rst 6>;
-                socionext,syscon-phy-mode = <&soc_glue 0>;
+        reg = <0x65000000 0x8500>;
+        interrupts = <0 66 4>;
+        phy-mode = "rgmii";
+        phy-handle = <&ethphy>;
+        clock-names = "ether";
+        clocks = <&sys_clk 6>;
+        reset-names = "ether";
+        resets = <&sys_rst 6>;
+        socionext,syscon-phy-mode = <&soc_glue 0>;
 
-                mdio {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-                        ethphy: ethernet-phy@1 {
-                                reg = <1>;
-                        };
-                };
+            ethphy: ethernet-phy@1 {
+                reg = <1>;
+            };
         };
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index 8b5da602a2e8..4d24dadfaa5d 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -192,50 +192,50 @@ examples:
         interrupt-names = "rx_thresh", "rx", "tx", "misc";
 
         ethernet-ports {
-                #address-cells = <1>;
-                #size-cells = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-                cpsw_port1: port@1 {
-                        reg = <1>;
-                        label = "port1";
-                        mac-address = [ 00 00 00 00 00 00 ];
-                        phys = <&phy_gmii_sel 1>;
-                        phy-handle = <&ethphy0_sw>;
-                        phy-mode = "rgmii";
-                        ti,dual-emac-pvid = <1>;
-                };
+            cpsw_port1: port@1 {
+                reg = <1>;
+                label = "port1";
+                mac-address = [ 00 00 00 00 00 00 ];
+                phys = <&phy_gmii_sel 1>;
+                phy-handle = <&ethphy0_sw>;
+                phy-mode = "rgmii";
+                ti,dual-emac-pvid = <1>;
+            };
 
-                cpsw_port2: port@2 {
-                        reg = <2>;
-                        label = "wan";
-                        mac-address = [ 00 00 00 00 00 00 ];
-                        phys = <&phy_gmii_sel 2>;
-                        phy-handle = <&ethphy1_sw>;
-                        phy-mode = "rgmii";
-                        ti,dual-emac-pvid = <2>;
-                };
+            cpsw_port2: port@2 {
+                reg = <2>;
+                label = "wan";
+                mac-address = [ 00 00 00 00 00 00 ];
+                phys = <&phy_gmii_sel 2>;
+                phy-handle = <&ethphy1_sw>;
+                phy-mode = "rgmii";
+                ti,dual-emac-pvid = <2>;
+            };
         };
 
         davinci_mdio_sw: mdio@1000 {
-                compatible = "ti,cpsw-mdio","ti,davinci_mdio";
-                reg = <0x1000 0x100>;
-                clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
-                clock-names = "fck";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                bus_freq = <1000000>;
+            compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+            reg = <0x1000 0x100>;
+            clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+            clock-names = "fck";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            bus_freq = <1000000>;
 
-                ethphy0_sw: ethernet-phy@0 {
-                        reg = <0>;
-                };
+            ethphy0_sw: ethernet-phy@0 {
+                reg = <0>;
+            };
 
-                ethphy1_sw: ethernet-phy@1 {
-                        reg = <1>;
-                };
+            ethphy1_sw: ethernet-phy@1 {
+                reg = <1>;
+            };
         };
 
         cpts {
-                clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
-                clock-names = "cpts";
+            clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
+            clock-names = "cpts";
         };
     };
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
index ae6b97cdc44b..bf4116b057d2 100644
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
@@ -325,22 +325,22 @@ examples:
           r0 {
             regdomain = "FCC";
             txpower-5g {
-               b0 {
-                   channels = <36 48>;
-                   rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
-                   rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
-                               /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
-                   rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
-                              /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
-               };
-               b1 {
-                   channels = <100 181>;
-                   rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
-                   rates-mcs = /bits/ 8  <4 14 14 14 14 14 14 14 14 14 14>;
-                   txs-delta = <12 9 6>;
-                   rates-ru = /bits/ 8  <7 14 14 14 14 14 14 14 14 14 14 14 14>;
-               };
-             };
+              b0 {
+                channels = <36 48>;
+                rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
+                rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
+                            /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
+                rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
+                           /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
+              };
+              b1 {
+                channels = <100 181>;
+                rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
+                rates-mcs = /bits/ 8  <4 14 14 14 14 14 14 14 14 14 14>;
+                txs-delta = <12 9 6>;
+                rates-ru = /bits/ 8  <7 14 14 14 14 14 14 14 14 14 14 14 14>;
+              };
+            };
           };
         };
       };
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
index e667d78b3ab3..a52cb8a0d409 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
@@ -408,4 +408,4 @@ examples:
                           "msi15",
                           "legacy";
         ieee80211-freq-limit = <5470000 5875000>;
-      };
+    };
-- 
2.53.0


^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-09-14  9:17 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-13 12:29 [PATCH net-next] dt-bindings: net: Use consistent indentation in the example Krzysztof Kozlowski
2026-09-14  9:14 ` Claudiu Manoil
2026-09-14  9:17   ` Krzysztof Kozlowski

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®