mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jacek Anaszewski <j.anaszewski@samsung.com>
To: Matt Ranostay <mranostay@gmail.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	Matt Ranostay <matt@ranostay.consulting>,
	Tony Lindgren <tony@atomide.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <Mark.Rutland@arm.com>
Subject: Re: [PATCH] leds: leds-pca963x: workaround group blink scaling issue
Date: Fri, 14 Oct 2016 08:36:23 +0200	[thread overview]
Message-ID: <924a896d-b3f2-5fed-62ba-a731e79e1567@samsung.com> (raw)
In-Reply-To: <CAKzfze_d5rQ-MaNL1BbGXrdHG+UDNa=us68eoH_AJ-EKLnzCvw@mail.gmail.com>

On 10/13/2016 04:20 PM, Matt Ranostay wrote:
> On Thu, Oct 13, 2016 at 4:05 PM, Jacek Anaszewski
> <j.anaszewski@samsung.com> wrote:
>> Hi Matt,
>>
>> On 10/13/2016 03:16 PM, Matt Ranostay wrote:
>>>
>>> PCA9632TK part seems to incorrectly blink at ~1.3x of the programmed
>>> rate. This patchset add a nxp,period-scale devicetree property to
>>> adjust for this misconfiguration.
>>>
>>> Cc: Tony Lindgren <tony@atomide.com>
>>> Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
>>> Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
>>> ---
>>>  Documentation/devicetree/bindings/leds/pca963x.txt |  3 +++
>>>  drivers/leds/leds-pca963x.c                        | 18
>>> +++++++++++++++---
>>>  2 files changed, 18 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt
>>> b/Documentation/devicetree/bindings/leds/pca963x.txt
>>> index dafbe9931c2b..dfbdb123a9bf 100644
>>> --- a/Documentation/devicetree/bindings/leds/pca963x.txt
>>> +++ b/Documentation/devicetree/bindings/leds/pca963x.txt
>>> @@ -7,6 +7,9 @@ Optional properties:
>>>  - nxp,totem-pole : use totem pole (push-pull) instead of open-drain
>>> (pca9632 defaults
>>>    to open-drain, newer chips to totem pole)
>>>  - nxp,hw-blink : use hardware blinking instead of software blinking
>>> +- nxp,period-scale : In some configurations, the chip blinks faster than
>>> expected.
>>> +                    This parameter provides a scaling ratio (fixed point,
>>> decimal divided
>>> +                    by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x.
>>
>>
>> Why DT property? Is it somehow dependent on the board configuration?
>> How this period-scale value is calculated? Is it inferred empirically?
>>
>
> We empirically discovered and verified this with an logic analyzer on
> multiple batches of this part.
> Reason for the DT entry is we aren't 100% sure that it is always going
> to be the same with different board revs.
>
> Could be that parts clock acts differently with supply voltage.   This
> has been calculated by setting it an expected value, and measuring the
> actual result with the logic analyzer.

I'd like to have DT maintainer's ack for this.

Cc Rob and Mark.

>>>  Each led is represented as a sub-node of the nxp,pca963x device.
>>>
>>> diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
>>> index 407eba11e187..b6ce1f2ec33e 100644
>>> --- a/drivers/leds/leds-pca963x.c
>>> +++ b/drivers/leds/leds-pca963x.c
>>> @@ -59,6 +59,7 @@ struct pca963x_chipdef {
>>>         u8                      grpfreq;
>>>         u8                      ledout_base;
>>>         int                     n_leds;
>>> +       unsigned int            scaling;
>>>  };
>>>
>>>  static struct pca963x_chipdef pca963x_chipdefs[] = {
>>> @@ -189,6 +190,14 @@ static int pca963x_led_set(struct led_classdev
>>> *led_cdev,
>>>         return pca963x_brightness(pca963x, value);
>>>  }
>>>
>>> +static unsigned int pca963x_period_scale(struct pca963x_led *pca963x,
>>> +       unsigned int val)
>>> +{
>>> +       unsigned int scaling = pca963x->chip->chipdef->scaling;
>>> +
>>> +       return scaling ? DIV_ROUND_CLOSEST(val * scaling, 1000) : val;
>>> +}
>>> +
>>>  static int pca963x_blink_set(struct led_classdev *led_cdev,
>>>                 unsigned long *delay_on, unsigned long *delay_off)
>>>  {
>>> @@ -207,14 +216,14 @@ static int pca963x_blink_set(struct led_classdev
>>> *led_cdev,
>>>                 time_off = 500;
>>>         }
>>>
>>> -       period = time_on + time_off;
>>> +       period = pca963x_period_scale(pca963x, time_on + time_off);
>>>
>>>         /* If period not supported by hardware, default to someting sane.
>>> */
>>>         if ((period < PCA963X_BLINK_PERIOD_MIN) ||
>>>             (period > PCA963X_BLINK_PERIOD_MAX)) {
>>>                 time_on = 500;
>>>                 time_off = 500;
>>> -               period = time_on + time_off;
>>> +               period = pca963x_period_scale(pca963x, 1000);
>>>         }
>>>
>>>         /*
>>> @@ -222,7 +231,7 @@ static int pca963x_blink_set(struct led_classdev
>>> *led_cdev,
>>>          *      (time_on / period) = (GDC / 256) ->
>>>          *              GDC = ((time_on * 256) / period)
>>>          */
>>> -       gdc = (time_on * 256) / period;
>>> +       gdc = (pca963x_period_scale(pca963x, time_on) * 256) / period;
>>>
>>>         /*
>>>          * From manual: period = ((GFRQ + 1) / 24) in seconds.
>>> @@ -294,6 +303,9 @@ pca963x_dt_init(struct i2c_client *client, struct
>>> pca963x_chipdef *chip)
>>>         else
>>>                 pdata->blink_type = PCA963X_SW_BLINK;
>>>
>>> +       if (of_property_read_u32(np, "nxp,period-scale", &chip->scaling))
>>> +               chip->scaling = 1000;
>>> +
>>>         return pdata;
>>>  }
>>>
>>>
>>
>>
>> --
>> Best regards,
>> Jacek Anaszewski
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>
>


-- 
Best regards,
Jacek Anaszewski

  reply	other threads:[~2016-10-14  6:37 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20161013131622eucas1p2e419c58b25f2c61da22d390f2adfacfd@eucas1p2.samsung.com>
2016-10-13 13:16 ` Matt Ranostay
2016-10-13 14:05   ` Jacek Anaszewski
2016-10-13 14:20     ` Matt Ranostay
2016-10-14  6:36       ` Jacek Anaszewski [this message]
2016-10-14 14:20         ` Tony Lindgren
2016-10-15 12:00           ` Matt Ranostay
2016-10-17  7:58             ` Jacek Anaszewski
2016-10-18 13:49               ` Rob Herring
2016-10-18 14:17                 ` Jacek Anaszewski
2016-10-25  7:15   ` Jacek Anaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=924a896d-b3f2-5fed-62ba-a731e79e1567@samsung.com \
    --to=j.anaszewski@samsung.com \
    --cc=Mark.Rutland@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=matt@ranostay.consulting \
    --cc=mranostay@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®