Re: [PATCH] leds: leds-pca963x: workaround group blink scaling issue

[Jacek Anaszewski <j.anaszewski@samsung.com>]

On 10/18/2016 03:49 PM, Rob Herring wrote:
> On Mon, Oct 17, 2016 at 09:58:26AM +0200, Jacek Anaszewski wrote:
>> On 10/15/2016 02:00 PM, Matt Ranostay wrote:
>>> On Fri, Oct 14, 2016 at 7:20 AM, Tony Lindgren <tony@atomide.com> wrote:
>>>> * Jacek Anaszewski <j.anaszewski@samsung.com> [161013 23:37]:
>>>>> On 10/13/2016 04:20 PM, Matt Ranostay wrote:
>>>>>> On Thu, Oct 13, 2016 at 4:05 PM, Jacek Anaszewski
>>>>>> <j.anaszewski@samsung.com> wrote:
>>>>>>> Why DT property? Is it somehow dependent on the board configuration?
>>>>>>> How this period-scale value is calculated? Is it inferred empirically?
>>>>>>>
>>>>>>
>>>>>> We empirically discovered and verified this with an logic analyzer on
>>>>>> multiple batches of this part.
>>>>>> Reason for the DT entry is we aren't 100% sure that it is always going
>>>>>> to be the same with different board revs.
>>>>>>
>>>>>> Could be that parts clock acts differently with supply voltage.   This
>>>>>> has been calculated by setting it an expected value, and measuring the
>>>>>> actual result with the logic analyzer.
>>>>>
>>>>> I'd like to have DT maintainer's ack for this.
>>>>>
>>>>> Cc Rob and Mark.
>>>>
>>>> How about do this based on the compatible property instead? If there
>>>> are multiple manufacturers for this part and only a certain
>>>> parts have this issue we should have multiple compatible properties.
>>>>
>>>
>>> I could only find that NXP as the manufacturer of that part. It is
>>> possible since the clock is internal to the chipset that the vdd of
>>> 2.5V is doing something undefined.
>>>
>>>> Then if it turns out all of them need this scaling there's no need
>>>> to update the binding.
>>>
>>> Understandable.
>>
>> Since at present we can't guarantee that all produced devices
>> are affected, then we should strive to avoid breaking any existing
>> users of the possible non-affected devices.
>>
>> In view of that the addition of a new "compatible" proposed by Tony
>> seems most reasonable.
>>
>> Still, DT maintainer's opinion is required.
>
> Seems like a quirk of this board, so I think the added property is fine.
>
> It could be existing users just didn't notice the rate being off. 30% is
> probably not all that noticeable to the human eye.

Thanks for the feedback. I infer that you wouldn't mind if
I added your ack to this commit then?

-- 
Best regards,
Jacek Anaszewski