Re: [PATCH 0/3] Add support to handle prefetchable memory

[Vidya Sagar <vidyas@nvidia.com>]

Hi Lorenzo & Bjorn,
Sorry to bother you.
Could you please take a look at the patches-1 & 2 from this series?

Thanks,
Vidya Sagar

On 11/4/2020 1:16 PM, Vidya Sagar wrote:
> External email: Use caution opening links or attachments
> 
> 
> Lorenzo / Bjorn,
> Could you please review patches-1 & 2 in this series?
> For the third patch, we already went with Rob's patch @
> http://patchwork.ozlabs.org/project/linux-pci/patch/20201026154852.221483-1-robh@kernel.org/ 
> 
> 
> Thanks,
> Vidya Sagar
> 
> On 10/26/2020 6:02 PM, Thierry Reding wrote:
>> On Sat, Oct 24, 2020 at 04:03:41AM +0000, Jingoo Han wrote:
>>> On 10/23/20, 3:57 PM, Vidya Sagar wrote:
>>>>
>>>> This patch series adds support for configuring the DesignWare IP's ATU
>>>> region for prefetchable memory translations.
>>>> It first starts by flagging a warning if the size of non-prefetchable
>>>> aperture goes beyond 32-bit as PCIe spec doesn't allow it.
>>>> And then adds required support for programming the ATU to handle higher
>>>> (i.e. >4GB) sizes and then finally adds support for differentiating
>>>> between prefetchable and non-prefetchable regions and configuring 
>>>> one of
>>>> the ATU regions for prefetchable memory translations purpose.
>>>>
>>>> Vidya Sagar (3):
>>>>    PCI: of: Warn if non-prefetchable memory aperture size is > 32-bit
>>>>    PCI: dwc: Add support to program ATU for >4GB memory aperture sizes
>>>>    PCI: dwc: Add support to handle prefetchable memory mapping
>>>
>>> For 2nd & 3rd,
>>> Acked-by: Jingoo <jingoohan1@gmail.com>
>>> But, I still want someone to ack 1st patch, not me.
>>>
>>> To Vidya,
>>> If possible, can you ask your coworker to give 'Tested-by'? It will 
>>> be very helpful.
>>> Thank you.
>>
>> On next-20201026 (but also going back quite a while) I'm seeing this
>> during boot on Jetson AGX Xavier (Tegra194):
>>
>> [    3.493382] ahci 0001:01:00.0: version 3.0
>> [    3.493889] ahci 0001:01:00.0: SSS flag set, parallel bus scan 
>> disabled
>> [    4.497706] ahci 0001:01:00.0: controller reset failed (0xffffffff)
>> [    4.498114] ahci: probe of 0001:01:00.0 failed with error -5
>>
>> After applying this series, AHCI over PCI is back to normal:
>>
>> [    3.543230] ahci 0001:01:00.0: AHCI 0001.0000 32 slots 1 ports 6 
>> Gbps 0x1 impl SATA mode
>> [    3.550841] ahci 0001:01:00.0: flags: 64bit ncq sntf led only pmp 
>> fbs pio slum part sxs
>> [    3.559747] scsi host0: ahci
>> [    3.561998] ata1: SATA max UDMA/133 abar m512@0x1230010000 port 
>> 0x1230010100 irq 63
>>
>> So for the series:
>>
>> Tested-by: Thierry Reding <treding@nvidia.com>
>>