[PATCH v2 0/5] Display enablement changes for Qualcomm QCS8300 platform

[PATCH v2 0/5] Display enablement changes for Qualcomm QCS8300 platform

[Yongxing Mou]

This series introduces support to enable the Mobile Display Subsystem (MDSS)
, Display Processing Unit (DPU), DisplayPort controller and eDP PHY for 
the Qualcomm QCS8300 target. It includes the addition of the hardware catalog,
compatible string, and their YAML bindings.

Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
---
This series depends on following series:
https://lore.kernel.org/all/20241203-qcs8300_initial_dtsi-v4-2-d7c953484024@quicinc.com/
https://lore.kernel.org/all/20241106-qcs8300-mm-patches-v3-0-f611a8f87f15@quicinc.com/
https://lore.kernel.org/all/20241114-qcs8300-mm-cc-dt-patch-v1-1-7a974508c736@quicinc.com/
https://lore.kernel.org/all/20241024-defconfig_sa8775p_clock_controllers-v2-1-a9e1cdaed785@quicinc.com/
---
Changes in v2:Fixed review comments from Krzysztof, Dmitry, Rob.
- Decouple the devicetree changes from this series.[Dmitry][Krzysztof]
- Drop the dpu driver changes and reuse SA8775P DPU driver.[Dmitry]
- Fix compilation issues in MDSS bindings.[Rob][Krzysztof]
- Correct formatting errors and remove unnecessary status in MDSS
  bindings.[Krzysztof]
- Add the the necessary information in MDSS changes commit msg.[Dmitry]
- Rebase MDSS driver changes to https://lore.kernel.org/dri-devel/
  20241127-msm-mdss-ubwc-v3-0-9782a7c2b023@linaro.org/.[Dmitry]
- Package the DisplayPort controller and eDP PHY bindings document to
  this patch series.
- Collecting MDSS changes reviewd-by Dmitry.
- Reuse the sa8775p eDP PHY as a fallback compat.[Dmitry]
- Reuse the sm8650 DP controller as a fallback compat.[Dmitry]
- Link to v1: https://lore.kernel.org/r/20241127-mdss_qcs8300-v1-0-29b2c3ee95b8@quicinc.com
~

---
Yongxing Mou (5):
      dt-bindings: display/msm: Document the DPU for QCS8300
      dt-bindings: display: msm: dp-controller: document QCS8300 compatible
      dt-bindings: display/msm: Document MDSS on QCS8300
      dt-bindings: phy: Add eDP PHY compatible for QCS8300
      drm/msm: mdss: Add QCS8300 support

 .../bindings/display/msm/dp-controller.yaml        |   4 +
 .../bindings/display/msm/qcom,qcs8300-mdss.yaml    | 244 +++++++++++++++++++++
 .../bindings/display/msm/qcom,sm8650-dpu.yaml      |  13 +-
 .../devicetree/bindings/phy/qcom,edp-phy.yaml      |  19 +-
 drivers/gpu/drm/msm/msm_mdss.c                     |  11 +
 5 files changed, 280 insertions(+), 11 deletions(-)
---
base-commit: 8155b4ef3466f0e289e8fcc9e6e62f3f4dceeac2
change-id: 20241224-mdssdt_qcs8300-11b7883dc60b
prerequisite-message-id: <20241203-qcs8300_initial_dtsi-v4-2-d7c953484024@quicinc.com>
prerequisite-patch-id: 33f2488a8eb133431f200e17aac743598508dcf3
prerequisite-patch-id: 7b653ebeaf1ca3f87620ccf7d876e3d1fe496c4a
prerequisite-patch-id: e1b60af8a64332e5f0ecbd3a4ea2b6e090bd97cf
prerequisite-patch-id: b823d744d2fb302e2496eaf0cf0c9c66312dcf2a
prerequisite-message-id: <20241106-qcs8300-mm-patches-v3-0-f611a8f87f15@quicinc.com>
prerequisite-patch-id: 367d9c742fe5087cfa6fb8e7b05ebe9bc78d68f3
prerequisite-patch-id: ee0513c070ab96e63766d235b38ee53ca9b19181
prerequisite-patch-id: 970974160bcdc837ccbe5ea3b5dcac582e90bc0d
prerequisite-patch-id: 5b2bd9cc44a529b0b9e5d73128dca5d2ff9f2f44
prerequisite-patch-id: 6a0a81242e1d0f051e3102533bf0191615c6e96b
prerequisite-patch-id: 322540ce6d45c32f813ecef50e5135c6f08d9019
prerequisite-message-id: <20241114-qcs8300-mm-cc-dt-patch-v1-1-7a974508c736@quicinc.com>
prerequisite-patch-id: 8faad5c6d8ca255935d3e4d317dcbcc32b8261ff
prerequisite-message-id: <20241024-defconfig_sa8775p_clock_controllers-v2-1-a9e1cdaed785@quicinc.com>
prerequisite-patch-id: 81378ec66ab6e569bd828401c43c4f5af55db32c

Best regards,
-- 
Yongxing Mou <quic_yongmou@quicinc.com>

[PATCH v2 1/5] dt-bindings: display/msm: Document the DPU for QCS8300

[Yongxing Mou]

Document the DPU for Qualcomm QCS8300 platform.It use the same DPU
hardware with SA8775P and reuse it's driver.

Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
---
 .../devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml    | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
index 01cf79bd754b491349c52c5aef49ba06e835d0bf..61ec4dd029a8de3b0e78fc97c6c0a602f84027ff 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
@@ -13,10 +13,15 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 
 properties:
   compatible:
-    enum:
-      - qcom,sa8775p-dpu
-      - qcom,sm8650-dpu
-      - qcom,x1e80100-dpu
+    oneOf:
+      - enum:
+          - qcom,sa8775p-dpu
+          - qcom,sm8650-dpu
+          - qcom,x1e80100-dpu
+      - items:
+          - enum:
+              - qcom,qcs8300-dpu
+          - const: qcom,sa8775p-dpu
 
   reg:
     items:

-- 
2.34.1

Re: [PATCH v2 1/5] dt-bindings: display/msm: Document the DPU for QCS8300

[Krzysztof Kozlowski]

On Thu, Dec 26, 2024 at 05:40:45PM +0800, Yongxing Mou wrote:
> Document the DPU for Qualcomm QCS8300 platform.It use the same DPU

Missing space after full stop.

> hardware with SA8775P and reuse it's driver.
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v2 1/5] dt-bindings: display/msm: Document the DPU for QCS8300

[Yongxing Mou]

On 2024/12/27 16:41, Krzysztof Kozlowski wrote:
> On Thu, Dec 26, 2024 at 05:40:45PM +0800, Yongxing Mou wrote:
>> Document the DPU for Qualcomm QCS8300 platform.It use the same DPU
> 
> Missing space after full stop.
> 
Got it. thanks, will fix it in next patch.
>> hardware with SA8775P and reuse it's driver.
>>
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> Best regards,
> Krzysztof
> 

[PATCH v2 2/5] dt-bindings: display: msm: dp-controller: document QCS8300 compatible

[Yongxing Mou]

Add compatible string for the DisplayPort controller found on the
Qualcomm QCS8300 platform.QCS8300 only support one DisplayPort
controller and have the same base offset with sm8650, so we reuse
the sm8650 DisplayPort driver.

Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
---
 Documentation/devicetree/bindings/display/msm/dp-controller.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index a212f335d5ffae545d2e5bacec95299ca45e8405..863ef967e48789d3ca4e5a8a2f198dad4e8ae321 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -36,6 +36,10 @@ properties:
               - qcom,sm8450-dp
               - qcom,sm8550-dp
           - const: qcom,sm8350-dp
+      - items:
+          - enum:
+              - qcom,qcs8300-dp
+          - const: qcom,sm8650-dp
 
   reg:
     minItems: 4

-- 
2.34.1

Re: [PATCH v2 2/5] dt-bindings: display: msm: dp-controller: document QCS8300 compatible

[Krzysztof Kozlowski]

On Thu, Dec 26, 2024 at 05:40:46PM +0800, Yongxing Mou wrote:
> Add compatible string for the DisplayPort controller found on the
> Qualcomm QCS8300 platform.QCS8300 only support one DisplayPort
> controller and have the same base offset with sm8650, so we reuse
> the sm8650 DisplayPort driver.
> 
> Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
> ---
>  Documentation/devicetree/bindings/display/msm/dp-controller.yaml | 4 ++++
>  1 file changed, 4 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v2 3/5] dt-bindings: display/msm: Document MDSS on QCS8300

[Yongxing Mou]

Document the MDSS hardware found on the Qualcomm QCS8300 platform.

Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
---
 .../bindings/display/msm/qcom,qcs8300-mdss.yaml    | 244 +++++++++++++++++++++
 1 file changed, 244 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..eb7f36387f748793ebf662baded4a13a61b3ce39
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml
@@ -0,0 +1,244 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcs8300-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QCS8300 Display MDSS
+
+maintainers:
+  - Yongxing Mou <quic_yongmou@quicinc.com>
+
+description:
+  QCS8300 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DP interfaces and EDP etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qcs8300-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,qcs8300-dpu
+          - const: qcom,sa8775p-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,qcs8300-dp
+          - const: qcom,sm8650-dp
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,qcs8300-gcc.h>
+    #include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
+    #include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    mdss: display-subsystem@ae00000 {
+        compatible = "qcom,qcs8300-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+                         &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+                        <&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ACTIVE_ONLY
+                         &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+                        <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                         &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
+
+        resets = <&dispcc_core_bcr>;
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&dispcc_ahb_clk>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc_mdp_clk>;
+
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1000 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,qcs8300-dpu", "qcom,sa8775p-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+
+                    dpu_intf0_out: endpoint {
+                         remote-endpoint = <&mdss_dp0_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-500000000 {
+                    opp-hz = /bits/ 64 <500000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+
+                opp-575000000 {
+                    opp-hz = /bits/ 64 <575000000>;
+                    required-opps = <&rpmhpd_opp_turbo>;
+                };
+
+                opp-650000000 {
+                    opp-hz = /bits/ 64 <650000000>;
+                    required-opps = <&rpmhpd_opp_turbo_l1>;
+                };
+            };
+        };
+
+        displayport-controller@af54000 {
+            compatible = "qcom,qcs8300-dp", "qcom,sm8650-dp";
+
+            pinctrl-0 = <&dp_hot_plug_det>;
+            pinctrl-names = "default";
+
+            reg = <0xaf54000 0x104>,
+                  <0xaf54200 0x0c0>,
+                  <0xaf55000 0x770>,
+                  <0xaf56000 0x09c>,
+                  <0xaf57000 0x09c>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+            clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+            assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+                              <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+            phys = <&mdss_edp_phy>;
+            phy-names = "dp";
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    mdss_dp0_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                   reg = <1>;
+
+                   mdss_dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...

-- 
2.34.1

[PATCH v2 4/5] dt-bindings: phy: Add eDP PHY compatible for QCS8300

[Yongxing Mou]

Add compatible string for the supported eDP PHY on QCS8300 platform.
QCS8300 have the same eDP PHY with SA8775P.

Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
---
 .../devicetree/bindings/phy/qcom,edp-phy.yaml         | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
index 293fb6a9b1c330438bceba15226c91e392c840fb..eb97181cbb9579893b4ee26a39c3559ad87b2fba 100644
--- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -16,13 +16,18 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,sa8775p-edp-phy
-      - qcom,sc7280-edp-phy
-      - qcom,sc8180x-edp-phy
-      - qcom,sc8280xp-dp-phy
-      - qcom,sc8280xp-edp-phy
-      - qcom,x1e80100-dp-phy
+    oneOf:
+      - enum:
+          - qcom,sa8775p-edp-phy
+          - qcom,sc7280-edp-phy
+          - qcom,sc8180x-edp-phy
+          - qcom,sc8280xp-dp-phy
+          - qcom,sc8280xp-edp-phy
+          - qcom,x1e80100-dp-phy
+      - items:
+          - enum:
+              - qcom,qcs8300-edp-phy
+          - const: qcom,sa8775p-edp-phy
 
   reg:
     items:

-- 
2.34.1

Re: [PATCH v2 4/5] dt-bindings: phy: Add eDP PHY compatible for QCS8300

[Krzysztof Kozlowski]

On Thu, Dec 26, 2024 at 05:40:48PM +0800, Yongxing Mou wrote:
> Add compatible string for the supported eDP PHY on QCS8300 platform.
> QCS8300 have the same eDP PHY with SA8775P.
> 
> Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
> ---
>  .../devicetree/bindings/phy/qcom,edp-phy.yaml         | 19 ++++++++++++-------
>  1 file changed, 12 insertions(+), 7 deletions(-)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v2 4/5] dt-bindings: phy: Add eDP PHY compatible for QCS8300

[Dmitry Baryshkov]

On Thu, Dec 26, 2024 at 05:40:48PM +0800, Yongxing Mou wrote:
> Add compatible string for the supported eDP PHY on QCS8300 platform.
> QCS8300 have the same eDP PHY with SA8775P.
> 
> Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
> ---
>  .../devicetree/bindings/phy/qcom,edp-phy.yaml         | 19 ++++++++++++-------
>  1 file changed, 12 insertions(+), 7 deletions(-)

Everything else is display, this one is PHY. Consider separating this
one to a separate series.

> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> index 293fb6a9b1c330438bceba15226c91e392c840fb..eb97181cbb9579893b4ee26a39c3559ad87b2fba 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> @@ -16,13 +16,18 @@ description:
>  
>  properties:
>    compatible:
> -    enum:
> -      - qcom,sa8775p-edp-phy
> -      - qcom,sc7280-edp-phy
> -      - qcom,sc8180x-edp-phy
> -      - qcom,sc8280xp-dp-phy
> -      - qcom,sc8280xp-edp-phy
> -      - qcom,x1e80100-dp-phy
> +    oneOf:
> +      - enum:
> +          - qcom,sa8775p-edp-phy
> +          - qcom,sc7280-edp-phy
> +          - qcom,sc8180x-edp-phy
> +          - qcom,sc8280xp-dp-phy
> +          - qcom,sc8280xp-edp-phy
> +          - qcom,x1e80100-dp-phy
> +      - items:
> +          - enum:
> +              - qcom,qcs8300-edp-phy
> +          - const: qcom,sa8775p-edp-phy
>  
>    reg:
>      items:
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry

Re: [PATCH v2 4/5] dt-bindings: phy: Add eDP PHY compatible for QCS8300

[Yongxing Mou]

On 2024/12/29 12:42, Dmitry Baryshkov wrote:
> On Thu, Dec 26, 2024 at 05:40:48PM +0800, Yongxing Mou wrote:
>> Add compatible string for the supported eDP PHY on QCS8300 platform.
>> QCS8300 have the same eDP PHY with SA8775P.
>>
>> Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
>> ---
>>   .../devicetree/bindings/phy/qcom,edp-phy.yaml         | 19 ++++++++++++-------
>>   1 file changed, 12 insertions(+), 7 deletions(-)
> 
> Everything else is display, this one is PHY. Consider separating this
> one to a separate series.
Got it. will separate in next version.
> 
>>
>> diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
>> index 293fb6a9b1c330438bceba15226c91e392c840fb..eb97181cbb9579893b4ee26a39c3559ad87b2fba 100644
>> --- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
>> +++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
>> @@ -16,13 +16,18 @@ description:
>>   
>>   properties:
>>     compatible:
>> -    enum:
>> -      - qcom,sa8775p-edp-phy
>> -      - qcom,sc7280-edp-phy
>> -      - qcom,sc8180x-edp-phy
>> -      - qcom,sc8280xp-dp-phy
>> -      - qcom,sc8280xp-edp-phy
>> -      - qcom,x1e80100-dp-phy
>> +    oneOf:
>> +      - enum:
>> +          - qcom,sa8775p-edp-phy
>> +          - qcom,sc7280-edp-phy
>> +          - qcom,sc8180x-edp-phy
>> +          - qcom,sc8280xp-dp-phy
>> +          - qcom,sc8280xp-edp-phy
>> +          - qcom,x1e80100-dp-phy
>> +      - items:
>> +          - enum:
>> +              - qcom,qcs8300-edp-phy
>> +          - const: qcom,sa8775p-edp-phy
>>   
>>     reg:
>>       items:
>>
>> -- 
>> 2.34.1
>>
> 

[PATCH v2 5/5] drm/msm: mdss: Add QCS8300 support

[Yongxing Mou]

Add Mobile Display Subsystem (MDSS) support for the QCS8300 platform.
Due to different memory type, it use different mdss_data with SA8775P
although using the same dpu.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
---
 drivers/gpu/drm/msm/msm_mdss.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index dcb49fd30402b80edd2cb5971f95a78eaad6081f..40c8b476763b8c39434b1448008cfa8ffac7a8ea 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -582,6 +582,16 @@ static const struct msm_mdss_data qcm2290_data = {
 	.reg_bus_bw = 76800,
 };
 
+static const struct msm_mdss_data qcs8300_data = {
+	.ubwc_enc_version = UBWC_4_0,
+	.ubwc_dec_version = UBWC_4_0,
+	.ubwc_swizzle = 6,
+	.ubwc_bank_spread = true,
+	.highest_bank_bit = 3,
+	.macrotile_mode = true,
+	.reg_bus_bw = 74000,
+};
+
 static const struct msm_mdss_data sa8775p_data = {
 	.ubwc_enc_version = UBWC_4_0,
 	.ubwc_dec_version = UBWC_4_0,
@@ -737,6 +747,7 @@ static const struct of_device_id mdss_dt_match[] = {
 	{ .compatible = "qcom,mdss" },
 	{ .compatible = "qcom,msm8998-mdss", .data = &msm8998_data },
 	{ .compatible = "qcom,qcm2290-mdss", .data = &qcm2290_data },
+	{ .compatible = "qcom,qcs8300-mdss", .data = &qcs8300_data },
 	{ .compatible = "qcom,sa8775p-mdss", .data = &sa8775p_data },
 	{ .compatible = "qcom,sdm670-mdss", .data = &sdm670_data },
 	{ .compatible = "qcom,sdm845-mdss", .data = &sdm845_data },

-- 
2.34.1

Re: [PATCH v2 0/5] Display enablement changes for Qualcomm QCS8300 platform

[Krzysztof Kozlowski]

On Thu, Dec 26, 2024 at 05:40:44PM +0800, Yongxing Mou wrote:
> This series introduces support to enable the Mobile Display Subsystem (MDSS)
> , Display Processing Unit (DPU), DisplayPort controller and eDP PHY for 
> the Qualcomm QCS8300 target. It includes the addition of the hardware catalog,
> compatible string, and their YAML bindings.
> 
> Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
> ---
> This series depends on following series:
> https://lore.kernel.org/all/20241203-qcs8300_initial_dtsi-v4-2-d7c953484024@quicinc.com/

Then why this is not part of initial DTSI?

> https://lore.kernel.org/all/20241106-qcs8300-mm-patches-v3-0-f611a8f87f15@quicinc.com/
> https://lore.kernel.org/all/20241114-qcs8300-mm-cc-dt-patch-v1-1-7a974508c736@quicinc.com/
> https://lore.kernel.org/all/20241024-defconfig_sa8775p_clock_controllers-v2-1-a9e1cdaed785@quicinc.com/

So it cannot be tested?

Way too many dependencies for me to review.

Best regards,
Krzysztof

Re: [PATCH v2 0/5] Display enablement changes for Qualcomm QCS8300 platform

[Yongxing Mou]

On 2024/12/27 16:39, Krzysztof Kozlowski wrote:
> On Thu, Dec 26, 2024 at 05:40:44PM +0800, Yongxing Mou wrote:
>> This series introduces support to enable the Mobile Display Subsystem (MDSS)
>> , Display Processing Unit (DPU), DisplayPort controller and eDP PHY for
>> the Qualcomm QCS8300 target. It includes the addition of the hardware catalog,
>> compatible string, and their YAML bindings.
>>
>> Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
>> ---
>> This series depends on following series:
>> https://lore.kernel.org/all/20241203-qcs8300_initial_dtsi-v4-2-d7c953484024@quicinc.com/
> 
> Then why this is not part of initial DTSI?
> 
Sorry. it's not part of initial DTSI, These are the dependencies for 
enabling the display MDSS/DP. Not the real dependency for dt-binds and 
driver.
>> https://lore.kernel.org/all/20241106-qcs8300-mm-patches-v3-0-f611a8f87f15@quicinc.com/
>> https://lore.kernel.org/all/20241114-qcs8300-mm-cc-dt-patch-v1-1-7a974508c736@quicinc.com/
>> https://lore.kernel.org/all/20241024-defconfig_sa8775p_clock_controllers-v2-1-a9e1cdaed785@quicinc.com/
> 
> So it cannot be tested?
> 
> Way too many dependencies for me to review.
> 
If we are only running dt-bindings checks or compiling driver files, we 
actually don't need these dependencies. You can directly running the 
test. They are all used to enable the display MDSS and DP. So maybe i 
need to update the cover letter and remove those dependencies. Thanks 
for point it.
> Best regards,
> Krzysztof
> 

Re: [PATCH v2 0/5] Display enablement changes for Qualcomm QCS8300 platform

[Dmitry Baryshkov]

On Thu, Dec 26, 2024 at 05:40:44PM +0800, Yongxing Mou wrote:
> This series introduces support to enable the Mobile Display Subsystem (MDSS)
> , Display Processing Unit (DPU), DisplayPort controller and eDP PHY for 
> the Qualcomm QCS8300 target. It includes the addition of the hardware catalog,
> compatible string, and their YAML bindings.
> 
> Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
> ---
> This series depends on following series:
> https://lore.kernel.org/all/20241203-qcs8300_initial_dtsi-v4-2-d7c953484024@quicinc.com/
> https://lore.kernel.org/all/20241106-qcs8300-mm-patches-v3-0-f611a8f87f15@quicinc.com/
> https://lore.kernel.org/all/20241114-qcs8300-mm-cc-dt-patch-v1-1-7a974508c736@quicinc.com/
> https://lore.kernel.org/all/20241024-defconfig_sa8775p_clock_controllers-v2-1-a9e1cdaed785@quicinc.com/

How does it depend on all those series? Does it have any intersection
point at all? You should have decoupled all bindings from those series.
If you did, please update your cover letter. If you didn't, please do
your home work.

> ---
> Changes in v2:Fixed review comments from Krzysztof, Dmitry, Rob.
> - Decouple the devicetree changes from this series.[Dmitry][Krzysztof]
> - Drop the dpu driver changes and reuse SA8775P DPU driver.[Dmitry]
> - Fix compilation issues in MDSS bindings.[Rob][Krzysztof]
> - Correct formatting errors and remove unnecessary status in MDSS
>   bindings.[Krzysztof]
> - Add the the necessary information in MDSS changes commit msg.[Dmitry]
> - Rebase MDSS driver changes to https://lore.kernel.org/dri-devel/
>   20241127-msm-mdss-ubwc-v3-0-9782a7c2b023@linaro.org/.[Dmitry]
> - Package the DisplayPort controller and eDP PHY bindings document to
>   this patch series.
> - Collecting MDSS changes reviewd-by Dmitry.
> - Reuse the sa8775p eDP PHY as a fallback compat.[Dmitry]
> - Reuse the sm8650 DP controller as a fallback compat.[Dmitry]
> - Link to v1: https://lore.kernel.org/r/20241127-mdss_qcs8300-v1-0-29b2c3ee95b8@quicinc.com
> ~
> 
> ---
> Yongxing Mou (5):
>       dt-bindings: display/msm: Document the DPU for QCS8300
>       dt-bindings: display: msm: dp-controller: document QCS8300 compatible
>       dt-bindings: display/msm: Document MDSS on QCS8300
>       dt-bindings: phy: Add eDP PHY compatible for QCS8300
>       drm/msm: mdss: Add QCS8300 support
> 
>  .../bindings/display/msm/dp-controller.yaml        |   4 +
>  .../bindings/display/msm/qcom,qcs8300-mdss.yaml    | 244 +++++++++++++++++++++
>  .../bindings/display/msm/qcom,sm8650-dpu.yaml      |  13 +-
>  .../devicetree/bindings/phy/qcom,edp-phy.yaml      |  19 +-
>  drivers/gpu/drm/msm/msm_mdss.c                     |  11 +
>  5 files changed, 280 insertions(+), 11 deletions(-)
> ---
> base-commit: 8155b4ef3466f0e289e8fcc9e6e62f3f4dceeac2
> change-id: 20241224-mdssdt_qcs8300-11b7883dc60b
> prerequisite-message-id: <20241203-qcs8300_initial_dtsi-v4-2-d7c953484024@quicinc.com>
> prerequisite-patch-id: 33f2488a8eb133431f200e17aac743598508dcf3
> prerequisite-patch-id: 7b653ebeaf1ca3f87620ccf7d876e3d1fe496c4a
> prerequisite-patch-id: e1b60af8a64332e5f0ecbd3a4ea2b6e090bd97cf
> prerequisite-patch-id: b823d744d2fb302e2496eaf0cf0c9c66312dcf2a
> prerequisite-message-id: <20241106-qcs8300-mm-patches-v3-0-f611a8f87f15@quicinc.com>
> prerequisite-patch-id: 367d9c742fe5087cfa6fb8e7b05ebe9bc78d68f3
> prerequisite-patch-id: ee0513c070ab96e63766d235b38ee53ca9b19181
> prerequisite-patch-id: 970974160bcdc837ccbe5ea3b5dcac582e90bc0d
> prerequisite-patch-id: 5b2bd9cc44a529b0b9e5d73128dca5d2ff9f2f44
> prerequisite-patch-id: 6a0a81242e1d0f051e3102533bf0191615c6e96b
> prerequisite-patch-id: 322540ce6d45c32f813ecef50e5135c6f08d9019
> prerequisite-message-id: <20241114-qcs8300-mm-cc-dt-patch-v1-1-7a974508c736@quicinc.com>
> prerequisite-patch-id: 8faad5c6d8ca255935d3e4d317dcbcc32b8261ff
> prerequisite-message-id: <20241024-defconfig_sa8775p_clock_controllers-v2-1-a9e1cdaed785@quicinc.com>
> prerequisite-patch-id: 81378ec66ab6e569bd828401c43c4f5af55db32c
> 
> Best regards,
> -- 
> Yongxing Mou <quic_yongmou@quicinc.com>
> 

-- 
With best wishes
Dmitry

Re: [PATCH v2 0/5] Display enablement changes for Qualcomm QCS8300 platform

[Yongxing Mou]

On 2024/12/29 12:44, Dmitry Baryshkov wrote:
> On Thu, Dec 26, 2024 at 05:40:44PM +0800, Yongxing Mou wrote:
>> This series introduces support to enable the Mobile Display Subsystem (MDSS)
>> , Display Processing Unit (DPU), DisplayPort controller and eDP PHY for
>> the Qualcomm QCS8300 target. It includes the addition of the hardware catalog,
>> compatible string, and their YAML bindings.
>>
>> Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
>> ---
>> This series depends on following series:
>> https://lore.kernel.org/all/20241203-qcs8300_initial_dtsi-v4-2-d7c953484024@quicinc.com/
>> https://lore.kernel.org/all/20241106-qcs8300-mm-patches-v3-0-f611a8f87f15@quicinc.com/
>> https://lore.kernel.org/all/20241114-qcs8300-mm-cc-dt-patch-v1-1-7a974508c736@quicinc.com/
>> https://lore.kernel.org/all/20241024-defconfig_sa8775p_clock_controllers-v2-1-a9e1cdaed785@quicinc.com/
> 
> How does it depend on all those series? Does it have any intersection
> point at all? You should have decoupled all bindings from those series.
> If you did, please update your cover letter. If you didn't, please do
> your home work.
> 
Thanks for point it.Yes, we have decouple all bindings from dts 
changes.For binding checks or driver, we no longer need these 
dependencies. I will update the cover letter later. Thanks.
>> ---
>> Changes in v2:Fixed review comments from Krzysztof, Dmitry, Rob.
>> - Decouple the devicetree changes from this series.[Dmitry][Krzysztof]
>> - Drop the dpu driver changes and reuse SA8775P DPU driver.[Dmitry]
>> - Fix compilation issues in MDSS bindings.[Rob][Krzysztof]
>> - Correct formatting errors and remove unnecessary status in MDSS
>>    bindings.[Krzysztof]
>> - Add the the necessary information in MDSS changes commit msg.[Dmitry]
>> - Rebase MDSS driver changes to https://lore.kernel.org/dri-devel/
>>    20241127-msm-mdss-ubwc-v3-0-9782a7c2b023@linaro.org/.[Dmitry]
>> - Package the DisplayPort controller and eDP PHY bindings document to
>>    this patch series.
>> - Collecting MDSS changes reviewd-by Dmitry.
>> - Reuse the sa8775p eDP PHY as a fallback compat.[Dmitry]
>> - Reuse the sm8650 DP controller as a fallback compat.[Dmitry]
>> - Link to v1: https://lore.kernel.org/r/20241127-mdss_qcs8300-v1-0-29b2c3ee95b8@quicinc.com
>> ~
>>
>> ---
>> Yongxing Mou (5):
>>        dt-bindings: display/msm: Document the DPU for QCS8300
>>        dt-bindings: display: msm: dp-controller: document QCS8300 compatible
>>        dt-bindings: display/msm: Document MDSS on QCS8300
>>        dt-bindings: phy: Add eDP PHY compatible for QCS8300
>>        drm/msm: mdss: Add QCS8300 support
>>
>>   .../bindings/display/msm/dp-controller.yaml        |   4 +
>>   .../bindings/display/msm/qcom,qcs8300-mdss.yaml    | 244 +++++++++++++++++++++
>>   .../bindings/display/msm/qcom,sm8650-dpu.yaml      |  13 +-
>>   .../devicetree/bindings/phy/qcom,edp-phy.yaml      |  19 +-
>>   drivers/gpu/drm/msm/msm_mdss.c                     |  11 +
>>   5 files changed, 280 insertions(+), 11 deletions(-)
>> ---
>> base-commit: 8155b4ef3466f0e289e8fcc9e6e62f3f4dceeac2
>> change-id: 20241224-mdssdt_qcs8300-11b7883dc60b
>> prerequisite-message-id: <20241203-qcs8300_initial_dtsi-v4-2-d7c953484024@quicinc.com>
>> prerequisite-patch-id: 33f2488a8eb133431f200e17aac743598508dcf3
>> prerequisite-patch-id: 7b653ebeaf1ca3f87620ccf7d876e3d1fe496c4a
>> prerequisite-patch-id: e1b60af8a64332e5f0ecbd3a4ea2b6e090bd97cf
>> prerequisite-patch-id: b823d744d2fb302e2496eaf0cf0c9c66312dcf2a
>> prerequisite-message-id: <20241106-qcs8300-mm-patches-v3-0-f611a8f87f15@quicinc.com>
>> prerequisite-patch-id: 367d9c742fe5087cfa6fb8e7b05ebe9bc78d68f3
>> prerequisite-patch-id: ee0513c070ab96e63766d235b38ee53ca9b19181
>> prerequisite-patch-id: 970974160bcdc837ccbe5ea3b5dcac582e90bc0d
>> prerequisite-patch-id: 5b2bd9cc44a529b0b9e5d73128dca5d2ff9f2f44
>> prerequisite-patch-id: 6a0a81242e1d0f051e3102533bf0191615c6e96b
>> prerequisite-patch-id: 322540ce6d45c32f813ecef50e5135c6f08d9019
>> prerequisite-message-id: <20241114-qcs8300-mm-cc-dt-patch-v1-1-7a974508c736@quicinc.com>
>> prerequisite-patch-id: 8faad5c6d8ca255935d3e4d317dcbcc32b8261ff
>> prerequisite-message-id: <20241024-defconfig_sa8775p_clock_controllers-v2-1-a9e1cdaed785@quicinc.com>
>> prerequisite-patch-id: 81378ec66ab6e569bd828401c43c4f5af55db32c
>>
>> Best regards,
>> -- 
>> Yongxing Mou <quic_yongmou@quicinc.com>
>>
>