[PATCH v3 0/8] phy: rockchip: samsung-hdptx: Support high color depth management

[PATCH v3 0/8] phy: rockchip: samsung-hdptx: Support high color depth management

[Cristian Ciocaltea]

This series relies on the new HDMI PHY configuration options [1] (patch
included here for convenience) to provide high color depth management
for rockchip-samsung-hdptx, and to introduce a proper solution to setup
the TMDS character rate on this PHY.

[1] https://lore.kernel.org/lkml/d1cff6c03ec3732d2244022029245ab2d954d997.1734340233.git.Sandor.yu@nxp.com/

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
Changes in v3:
- Rebased series onto next-20250221 and fixed several conflicts due to
  the recently introduced eDP support
- Link to v2: https://lore.kernel.org/r/20241212-phy-sam-hdptx-bpc-v2-0-57e672c7c7c4@collabora.com

Changes in v2:
- Added new patches providing a bug fix and several driver cleanups and
  improvements
- Link to v1: https://lore.kernel.org/r/20241207-phy-sam-hdptx-bpc-v1-0-03c2e4d6d797@collabora.com

---
Cristian Ciocaltea (7):
      phy: hdmi: Add color depth configuration
      phy: rockchip: samsung-hdptx: Fix clock ratio setup
      phy: rockchip: samsung-hdptx: Drop unused lcpll_config
      phy: rockchip: samsung-hdptx: Setup TMDS char rate via phy_configure_opts_hdmi
      phy: rockchip: samsung-hdptx: Add high color depth management
      phy: rockchip: samsung-hdptx: Cleanup internal rate handling
      phy: rockchip: samsung-hdptx: Avoid Hz-hHz unit conversion overhead

Sandor Yu (1):
      phy: Add HDMI configuration options

 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 163 +++++++++++-----------
 include/linux/phy/phy-hdmi.h                      |  21 +++
 include/linux/phy/phy.h                           |   7 +-
 3 files changed, 111 insertions(+), 80 deletions(-)
---
base-commit: d4b0fd87ff0d4338b259dc79b2b3c6f7e70e8afa
change-id: 20241206-phy-sam-hdptx-bpc-3b05c6276fd7

[PATCH v3 1/8] phy: Add HDMI configuration options

[Cristian Ciocaltea]

From: Sandor Yu <Sandor.yu@nxp.com>

Allow HDMI PHYs to be configured through the generic
functions through a custom structure added to the generic union.

The parameters added here are based on HDMI PHY
implementation practices.  The current set of parameters
should cover the potential users.

Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/d1cff6c03ec3732d2244022029245ab2d954d997.1734340233.git.Sandor.yu@nxp.com
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 include/linux/phy/phy-hdmi.h | 19 +++++++++++++++++++
 include/linux/phy/phy.h      |  7 ++++++-
 2 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/include/linux/phy/phy-hdmi.h b/include/linux/phy/phy-hdmi.h
new file mode 100644
index 0000000000000000000000000000000000000000..6a696922bc7f29af63d88646701b2c0fcee5c885
--- /dev/null
+++ b/include/linux/phy/phy-hdmi.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2022,2024 NXP
+ */
+
+#ifndef __PHY_HDMI_H_
+#define __PHY_HDMI_H_
+
+/**
+ * struct phy_configure_opts_hdmi - HDMI configuration set
+ * @tmds_char_rate: HDMI TMDS Character Rate in Hertz.
+ *
+ * This structure is used to represent the configuration state of a HDMI phy.
+ */
+struct phy_configure_opts_hdmi {
+	unsigned long long tmds_char_rate;
+};
+
+#endif /* __PHY_HDMI_H_ */
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 03cd5bae92d3f189d739c453fe4c160dd2a5063e..4ac486b101fe4023b8f2a84e907e65a0ff0a5ede 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -17,6 +17,7 @@
 #include <linux/regulator/consumer.h>
 
 #include <linux/phy/phy-dp.h>
+#include <linux/phy/phy-hdmi.h>
 #include <linux/phy/phy-lvds.h>
 #include <linux/phy/phy-mipi-dphy.h>
 
@@ -42,7 +43,8 @@ enum phy_mode {
 	PHY_MODE_MIPI_DPHY,
 	PHY_MODE_SATA,
 	PHY_MODE_LVDS,
-	PHY_MODE_DP
+	PHY_MODE_DP,
+	PHY_MODE_HDMI,
 };
 
 enum phy_media {
@@ -60,11 +62,14 @@ enum phy_media {
  *		the DisplayPort protocol.
  * @lvds:	Configuration set applicable for phys supporting
  *		the LVDS phy mode.
+ * @hdmi:	Configuration set applicable for phys supporting
+ *		the HDMI phy mode.
  */
 union phy_configure_opts {
 	struct phy_configure_opts_mipi_dphy	mipi_dphy;
 	struct phy_configure_opts_dp		dp;
 	struct phy_configure_opts_lvds		lvds;
+	struct phy_configure_opts_hdmi		hdmi;
 };
 
 /**

-- 
2.48.1

[PATCH v3 2/8] phy: hdmi: Add color depth configuration

[Cristian Ciocaltea]

Extend the HDMI configuration options to allow managing bits per color
channel.  This is required by some PHY drivers such as
rockchip-samsung-hdptx.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 include/linux/phy/phy-hdmi.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/phy/phy-hdmi.h b/include/linux/phy/phy-hdmi.h
index 6a696922bc7f29af63d88646701b2c0fcee5c885..f0ec963c6e84f1b7728acafc824dff191c6b873d 100644
--- a/include/linux/phy/phy-hdmi.h
+++ b/include/linux/phy/phy-hdmi.h
@@ -9,11 +9,13 @@
 /**
  * struct phy_configure_opts_hdmi - HDMI configuration set
  * @tmds_char_rate: HDMI TMDS Character Rate in Hertz.
+ * @bpc: Bits per color channel.
  *
  * This structure is used to represent the configuration state of a HDMI phy.
  */
 struct phy_configure_opts_hdmi {
 	unsigned long long tmds_char_rate;
+	unsigned int bpc;
 };
 
 #endif /* __PHY_HDMI_H_ */

-- 
2.48.1

[PATCH v3 3/8] phy: rockchip: samsung-hdptx: Fix clock ratio setup

[Cristian Ciocaltea]

The switch from 1/10 to 1/40 clock ratio must happen when exceeding the
340 MHz rate limit of HDMI 1.4, i.e. when entering the HDMI 2.0 domain,
and not before.

While at it, introduce a define for this rate limit constant.

Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index f88369864c50e4563834ccbb26f1f9f440e99271..cf2c3a46604cb9d8c26fe5ec8346904e0b62848f 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -320,6 +320,7 @@
 #define LN3_TX_SER_RATE_SEL_HBR2_MASK	BIT(3)
 #define LN3_TX_SER_RATE_SEL_HBR3_MASK	BIT(2)
 
+#define HDMI14_MAX_RATE			340000000
 #define HDMI20_MAX_RATE			600000000
 
 enum dp_link_rate {
@@ -1072,7 +1073,7 @@ static int rk_hdptx_ropll_tmds_mode_config(struct rk_hdptx_phy *hdptx,
 
 	regmap_write(hdptx->regmap, LNTOP_REG(0200), 0x06);
 
-	if (rate >= 3400000) {
+	if (rate > HDMI14_MAX_RATE / 100) {
 		/* For 1/40 bitrate clk */
 		rk_hdptx_multi_reg_write(hdptx, rk_hdtpx_tmds_lntop_highbr_seq);
 	} else {

-- 
2.48.1

[PATCH v3 4/8] phy: rockchip: samsung-hdptx: Drop unused lcpll_config

[Cristian Ciocaltea]

This is just a leftover from downstream support for HDMI 2.1.
Remove the unused struct for now.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 31 -----------------------
 1 file changed, 31 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index cf2c3a46604cb9d8c26fe5ec8346904e0b62848f..f9b5c96d6c789e435657e224032d35b5a6950945 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -329,37 +329,6 @@ enum dp_link_rate {
 	DP_BW_HBR2,
 };
 
-struct lcpll_config {
-	u32 bit_rate;
-	u8 lcvco_mode_en;
-	u8 pi_en;
-	u8 clk_en_100m;
-	u8 pms_mdiv;
-	u8 pms_mdiv_afc;
-	u8 pms_pdiv;
-	u8 pms_refdiv;
-	u8 pms_sdiv;
-	u8 pi_cdiv_rstn;
-	u8 pi_cdiv_sel;
-	u8 sdm_en;
-	u8 sdm_rstn;
-	u8 sdc_frac_en;
-	u8 sdc_rstn;
-	u8 sdm_deno;
-	u8 sdm_num_sign;
-	u8 sdm_num;
-	u8 sdc_n;
-	u8 sdc_n2;
-	u8 sdc_num;
-	u8 sdc_deno;
-	u8 sdc_ndiv_rstn;
-	u8 ssc_en;
-	u8 ssc_fm_dev;
-	u8 ssc_fm_freq;
-	u8 ssc_clk_div_sel;
-	u8 cd_tx_ser_rate_sel;
-};
-
 struct ropll_config {
 	u32 bit_rate;
 	u8 pms_mdiv;

-- 
2.48.1

[PATCH v3 5/8] phy: rockchip: samsung-hdptx: Setup TMDS char rate via phy_configure_opts_hdmi

[Cristian Ciocaltea]

The current workaround to setup the TMDS character rate relies on the
unconventional usage of phy_set_bus_width().

Make use of the recently introduced HDMI PHY configuration API for this
purpose.  The workaround will be dropped as soon as the switch has been
completed on both ends.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 37 +++++++++++++++++------
 1 file changed, 27 insertions(+), 10 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index f9b5c96d6c789e435657e224032d35b5a6950945..dd91a7272e246b2133112effdb080a847fd15abe 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -402,6 +402,9 @@ struct rk_hdptx_phy {
 	int nr_clks;
 	struct reset_control_bulk_data rsts[RST_MAX];
 
+	/* PHY config opts */
+	unsigned long tmds_char_rate;
+
 	/* clk provider */
 	struct clk_hw hw;
 	unsigned long rate;
@@ -1413,19 +1416,21 @@ static int rk_hdptx_dp_aux_init(struct rk_hdptx_phy *hdptx)
 static int rk_hdptx_phy_power_on(struct phy *phy)
 {
 	struct rk_hdptx_phy *hdptx = phy_get_drvdata(phy);
-	int bus_width = phy_get_bus_width(hdptx->phy);
+	unsigned int rate = hdptx->tmds_char_rate / 100;
 	enum phy_mode mode = phy_get_mode(phy);
 	int ret, lane;
 
-	/*
-	 * FIXME: Temporary workaround to pass pixel_clk_rate
-	 * from the HDMI bridge driver until phy_configure_opts_hdmi
-	 * becomes available in the PHY API.
-	 */
-	unsigned int rate = bus_width & 0xfffffff;
+	if (rate == 0) {
+		/*
+		 * FIXME: Temporary workaround to setup TMDS char rate
+		 * from the RK HDMI bridge driver.
+		 * Will be removed as soon the switch to the HDMI PHY
+		 * configuration API has been completed on both ends.
+		 */
+		rate = phy_get_bus_width(hdptx->phy) & 0xfffffff;
+	}
 
-	dev_dbg(hdptx->dev, "%s bus_width=%x rate=%u\n",
-		__func__, bus_width, rate);
+	dev_dbg(hdptx->dev, "%s rate=%u\n", __func__, rate);
 
 	ret = rk_hdptx_phy_consumer_get(hdptx, rate);
 	if (ret)
@@ -1734,8 +1739,10 @@ static int rk_hdptx_phy_configure(struct phy *phy, union phy_configure_opts *opt
 	enum phy_mode mode = phy_get_mode(phy);
 	int ret;
 
-	if (mode != PHY_MODE_DP)
+	if (mode != PHY_MODE_DP) {
+		hdptx->tmds_char_rate = opts->hdmi.tmds_char_rate;
 		return 0;
+	}
 
 	ret = rk_hdptx_phy_verify_config(hdptx, &opts->dp);
 	if (ret) {
@@ -1830,6 +1837,16 @@ static int rk_hdptx_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
 
+	/*
+	 * The TMDS char rate set via phy_configure(), if any, has
+	 * precedence over the rate provided via clk_set_rate().
+	 */
+	if (hdptx->tmds_char_rate && hdptx->tmds_char_rate != rate) {
+		dev_dbg(hdptx->dev, "Replaced clk_set_rate=%lu with tmds_char_rate=%lu\n",
+			rate, hdptx->tmds_char_rate);
+		rate = hdptx->tmds_char_rate;
+	}
+
 	return rk_hdptx_ropll_tmds_cmn_config(hdptx, rate / 100);
 }
 

-- 
2.48.1

Re: [PATCH v3 5/8] phy: rockchip: samsung-hdptx: Setup TMDS char rate via phy_configure_opts_hdmi

[Dmitry Baryshkov]

On Sun, 23 Feb 2025 at 13:02, Cristian Ciocaltea
<cristian.ciocaltea@collabora.com> wrote:
>
> The current workaround to setup the TMDS character rate relies on the
> unconventional usage of phy_set_bus_width().
>
> Make use of the recently introduced HDMI PHY configuration API for this
> purpose.  The workaround will be dropped as soon as the switch has been
> completed on both ends.
>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
> ---
>  drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 37 +++++++++++++++++------
>  1 file changed, 27 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
> index f9b5c96d6c789e435657e224032d35b5a6950945..dd91a7272e246b2133112effdb080a847fd15abe 100644
> --- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
> +++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
> @@ -402,6 +402,9 @@ struct rk_hdptx_phy {
>         int nr_clks;
>         struct reset_control_bulk_data rsts[RST_MAX];
>
> +       /* PHY config opts */
> +       unsigned long tmds_char_rate;

It's easier to embed struct phy_configure_opts_hdmi here, in the end
you  add bpc here in one of the next patches.

> +
>         /* clk provider */
>         struct clk_hw hw;
>         unsigned long rate;
> @@ -1413,19 +1416,21 @@ static int rk_hdptx_dp_aux_init(struct rk_hdptx_phy *hdptx)
>  static int rk_hdptx_phy_power_on(struct phy *phy)
>  {
>         struct rk_hdptx_phy *hdptx = phy_get_drvdata(phy);
> -       int bus_width = phy_get_bus_width(hdptx->phy);
> +       unsigned int rate = hdptx->tmds_char_rate / 100;
>         enum phy_mode mode = phy_get_mode(phy);
>         int ret, lane;
>
> -       /*
> -        * FIXME: Temporary workaround to pass pixel_clk_rate
> -        * from the HDMI bridge driver until phy_configure_opts_hdmi
> -        * becomes available in the PHY API.
> -        */
> -       unsigned int rate = bus_width & 0xfffffff;
> +       if (rate == 0) {
> +               /*
> +                * FIXME: Temporary workaround to setup TMDS char rate
> +                * from the RK HDMI bridge driver.
> +                * Will be removed as soon the switch to the HDMI PHY
> +                * configuration API has been completed on both ends.
> +                */
> +               rate = phy_get_bus_width(hdptx->phy) & 0xfffffff;
> +       }
>
> -       dev_dbg(hdptx->dev, "%s bus_width=%x rate=%u\n",
> -               __func__, bus_width, rate);
> +       dev_dbg(hdptx->dev, "%s rate=%u\n", __func__, rate);
>
>         ret = rk_hdptx_phy_consumer_get(hdptx, rate);
>         if (ret)
> @@ -1734,8 +1739,10 @@ static int rk_hdptx_phy_configure(struct phy *phy, union phy_configure_opts *opt
>         enum phy_mode mode = phy_get_mode(phy);
>         int ret;
>
> -       if (mode != PHY_MODE_DP)
> +       if (mode != PHY_MODE_DP) {
> +               hdptx->tmds_char_rate = opts->hdmi.tmds_char_rate;
>                 return 0;
> +       }
>
>         ret = rk_hdptx_phy_verify_config(hdptx, &opts->dp);
>         if (ret) {
> @@ -1830,6 +1837,16 @@ static int rk_hdptx_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
>  {
>         struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
>
> +       /*
> +        * The TMDS char rate set via phy_configure(), if any, has
> +        * precedence over the rate provided via clk_set_rate().

I think this is not so nice. It makes CCF desync from the actual rate
programmed into the hardware. Maybe you can make the clock r/o?

> +        */
> +       if (hdptx->tmds_char_rate && hdptx->tmds_char_rate != rate) {
> +               dev_dbg(hdptx->dev, "Replaced clk_set_rate=%lu with tmds_char_rate=%lu\n",
> +                       rate, hdptx->tmds_char_rate);
> +               rate = hdptx->tmds_char_rate;
> +       }
> +
>         return rk_hdptx_ropll_tmds_cmn_config(hdptx, rate / 100);
>  }
>
>
> --
> 2.48.1
>


--
With best wishes
Dmitry

Re: [PATCH v3 5/8] phy: rockchip: samsung-hdptx: Setup TMDS char rate via phy_configure_opts_hdmi

[Cristian Ciocaltea]

On 2/24/25 1:38 AM, Dmitry Baryshkov wrote:
> On Sun, 23 Feb 2025 at 13:02, Cristian Ciocaltea
> <cristian.ciocaltea@collabora.com> wrote:
>>
>> The current workaround to setup the TMDS character rate relies on the
>> unconventional usage of phy_set_bus_width().
>>
>> Make use of the recently introduced HDMI PHY configuration API for this
>> purpose.  The workaround will be dropped as soon as the switch has been
>> completed on both ends.
>>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
>> ---
>>  drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 37 +++++++++++++++++------
>>  1 file changed, 27 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
>> index f9b5c96d6c789e435657e224032d35b5a6950945..dd91a7272e246b2133112effdb080a847fd15abe 100644
>> --- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
>> +++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
>> @@ -402,6 +402,9 @@ struct rk_hdptx_phy {
>>         int nr_clks;
>>         struct reset_control_bulk_data rsts[RST_MAX];
>>
>> +       /* PHY config opts */
>> +       unsigned long tmds_char_rate;
> 
> It's easier to embed struct phy_configure_opts_hdmi here, in the end
> you  add bpc here in one of the next patches.

Indeed, handled in [1], part of v4.
 
>> +
>>         /* clk provider */
>>         struct clk_hw hw;
>>         unsigned long rate;

[...]

>> @@ -1830,6 +1837,16 @@ static int rk_hdptx_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
>>  {
>>         struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
>>
>> +       /*
>> +        * The TMDS char rate set via phy_configure(), if any, has
>> +        * precedence over the rate provided via clk_set_rate().
> 
> I think this is not so nice. It makes CCF desync from the actual rate
> programmed into the hardware. Maybe you can make the clock r/o?

Oh, you're right.  I should have added just a warning here, though I
haven't really noticed this in practice so far.

I ended up providing a new patch [2] to properly restrict altering 
the TMDS char rate.  As explained in the commit message, making the 
clock read-only is currently not feasible, but I'll revisit this as
soon as the switch to relying exclusively on the HDMI PHY config API 
for the rate setup gets completed on both ends.

Thanks for the review!

Regards,
Cristian
 
>> +        */
>> +       if (hdptx->tmds_char_rate && hdptx->tmds_char_rate != rate) {
>> +               dev_dbg(hdptx->dev, "Replaced clk_set_rate=%lu with tmds_char_rate=%lu\n",
>> +                       rate, hdptx->tmds_char_rate);
>> +               rate = hdptx->tmds_char_rate;
>> +       }
>> +
>>         return rk_hdptx_ropll_tmds_cmn_config(hdptx, rate / 100);
>>  }
>>
>>
>> --
>> 2.48.1

[1] https://lore.kernel.org/lkml/20250304-phy-sam-hdptx-bpc-v4-7-8657847c13f7@collabora.com/
[2] https://lore.kernel.org/lkml/20250304-phy-sam-hdptx-bpc-v4-9-8657847c13f7@collabora.com/

[PATCH v3 6/8] phy: rockchip: samsung-hdptx: Add high color depth management

[Cristian Ciocaltea]

Add support for 8-bit, 10-bit, 12-bit and 16-bit color depth setup.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index dd91a7272e246b2133112effdb080a847fd15abe..792ed3d1459f84e735041f55cac15941f6f785ef 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -404,6 +404,7 @@ struct rk_hdptx_phy {
 
 	/* PHY config opts */
 	unsigned long tmds_char_rate;
+	unsigned int bpc;
 
 	/* clk provider */
 	struct clk_hw hw;
@@ -1032,6 +1033,9 @@ static int rk_hdptx_ropll_tmds_cmn_config(struct rk_hdptx_phy *hdptx,
 	regmap_update_bits(hdptx->regmap, CMN_REG(0086), PLL_PCG_POSTDIV_SEL_MASK,
 			   FIELD_PREP(PLL_PCG_POSTDIV_SEL_MASK, cfg->pms_sdiv));
 
+	regmap_update_bits(hdptx->regmap, CMN_REG(0086), PLL_PCG_CLK_SEL_MASK,
+			   FIELD_PREP(PLL_PCG_CLK_SEL_MASK, (hdptx->bpc - 8) >> 1));
+
 	regmap_update_bits(hdptx->regmap, CMN_REG(0086), PLL_PCG_CLK_EN_MASK,
 			   FIELD_PREP(PLL_PCG_CLK_EN_MASK, 0x1));
 
@@ -1430,7 +1434,7 @@ static int rk_hdptx_phy_power_on(struct phy *phy)
 		rate = phy_get_bus_width(hdptx->phy) & 0xfffffff;
 	}
 
-	dev_dbg(hdptx->dev, "%s rate=%u\n", __func__, rate);
+	dev_dbg(hdptx->dev, "%s rate=%u bpc=%u\n", __func__, rate, hdptx->bpc);
 
 	ret = rk_hdptx_phy_consumer_get(hdptx, rate);
 	if (ret)
@@ -1741,6 +1745,19 @@ static int rk_hdptx_phy_configure(struct phy *phy, union phy_configure_opts *opt
 
 	if (mode != PHY_MODE_DP) {
 		hdptx->tmds_char_rate = opts->hdmi.tmds_char_rate;
+
+		switch (opts->hdmi.bpc) {
+		case 8:
+		case 10:
+		case 12:
+		case 16:
+			hdptx->bpc = opts->hdmi.bpc;
+			break;
+		default:
+			dev_warn(hdptx->dev, "Discarded unsupported bpc: %u\n",
+				 opts->hdmi.bpc);
+		};
+
 		return 0;
 	}
 
@@ -1922,6 +1939,7 @@ static int rk_hdptx_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	hdptx->dev = dev;
+	hdptx->bpc = 8;
 
 	regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(regs))

-- 
2.48.1

[PATCH v3 7/8] phy: rockchip: samsung-hdptx: Cleanup internal rate handling

[Cristian Ciocaltea]

Drop the rate parameter from a bunch of internal helpers and, instead,
make better use of the newly introduced ->tmds_char_rate driver data.

No functional changes intended.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 27 ++++++++++++-----------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index 792ed3d1459f84e735041f55cac15941f6f785ef..fdac60bb87510002626735e0e9f18ad5de9a6642 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -1042,14 +1042,13 @@ static int rk_hdptx_ropll_tmds_cmn_config(struct rk_hdptx_phy *hdptx,
 	return rk_hdptx_post_enable_pll(hdptx);
 }
 
-static int rk_hdptx_ropll_tmds_mode_config(struct rk_hdptx_phy *hdptx,
-					   unsigned int rate)
+static int rk_hdptx_ropll_tmds_mode_config(struct rk_hdptx_phy *hdptx)
 {
 	rk_hdptx_multi_reg_write(hdptx, rk_hdtpx_common_sb_init_seq);
 
 	regmap_write(hdptx->regmap, LNTOP_REG(0200), 0x06);
 
-	if (rate > HDMI14_MAX_RATE / 100) {
+	if (hdptx->tmds_char_rate > HDMI14_MAX_RATE) {
 		/* For 1/40 bitrate clk */
 		rk_hdptx_multi_reg_write(hdptx, rk_hdtpx_tmds_lntop_highbr_seq);
 	} else {
@@ -1101,10 +1100,10 @@ static void rk_hdptx_dp_reset(struct rk_hdptx_phy *hdptx)
 		     HDPTX_I_BGR_EN << 16 | FIELD_PREP(HDPTX_I_BGR_EN, 0x0));
 }
 
-static int rk_hdptx_phy_consumer_get(struct rk_hdptx_phy *hdptx,
-				     unsigned int rate)
+static int rk_hdptx_phy_consumer_get(struct rk_hdptx_phy *hdptx)
 {
 	enum phy_mode mode = phy_get_mode(hdptx->phy);
+	unsigned long rate;
 	u32 status;
 	int ret;
 
@@ -1121,8 +1120,9 @@ static int rk_hdptx_phy_consumer_get(struct rk_hdptx_phy *hdptx,
 	if (mode == PHY_MODE_DP) {
 		rk_hdptx_dp_reset(hdptx);
 	} else {
+		rate = hdptx->tmds_char_rate ?: hdptx->rate;
 		if (rate) {
-			ret = rk_hdptx_ropll_tmds_cmn_config(hdptx, rate);
+			ret = rk_hdptx_ropll_tmds_cmn_config(hdptx, rate / 100);
 			if (ret)
 				goto dec_usage;
 		}
@@ -1420,23 +1420,24 @@ static int rk_hdptx_dp_aux_init(struct rk_hdptx_phy *hdptx)
 static int rk_hdptx_phy_power_on(struct phy *phy)
 {
 	struct rk_hdptx_phy *hdptx = phy_get_drvdata(phy);
-	unsigned int rate = hdptx->tmds_char_rate / 100;
 	enum phy_mode mode = phy_get_mode(phy);
 	int ret, lane;
 
-	if (rate == 0) {
+	if (!hdptx->tmds_char_rate) {
 		/*
 		 * FIXME: Temporary workaround to setup TMDS char rate
 		 * from the RK HDMI bridge driver.
 		 * Will be removed as soon the switch to the HDMI PHY
 		 * configuration API has been completed on both ends.
 		 */
-		rate = phy_get_bus_width(hdptx->phy) & 0xfffffff;
+		hdptx->tmds_char_rate = phy_get_bus_width(hdptx->phy) & 0xfffffff;
+		hdptx->tmds_char_rate *= 100;
 	}
 
-	dev_dbg(hdptx->dev, "%s rate=%u bpc=%u\n", __func__, rate, hdptx->bpc);
+	dev_dbg(hdptx->dev, "%s tmds_rate=%lu bpc=%u\n", __func__,
+		hdptx->tmds_char_rate, hdptx->bpc);
 
-	ret = rk_hdptx_phy_consumer_get(hdptx, rate);
+	ret = rk_hdptx_phy_consumer_get(hdptx);
 	if (ret)
 		return ret;
 
@@ -1467,7 +1468,7 @@ static int rk_hdptx_phy_power_on(struct phy *phy)
 		regmap_write(hdptx->grf, GRF_HDPTX_CON0,
 			     HDPTX_MODE_SEL << 16 | FIELD_PREP(HDPTX_MODE_SEL, 0x0));
 
-		ret = rk_hdptx_ropll_tmds_mode_config(hdptx, rate);
+		ret = rk_hdptx_ropll_tmds_mode_config(hdptx);
 		if (ret)
 			rk_hdptx_phy_consumer_put(hdptx, true);
 	}
@@ -1811,7 +1812,7 @@ static int rk_hdptx_phy_clk_prepare(struct clk_hw *hw)
 {
 	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
 
-	return rk_hdptx_phy_consumer_get(hdptx, hdptx->rate / 100);
+	return rk_hdptx_phy_consumer_get(hdptx);
 }
 
 static void rk_hdptx_phy_clk_unprepare(struct clk_hw *hw)

-- 
2.48.1

[PATCH v3 8/8] phy: rockchip: samsung-hdptx: Avoid Hz-hHz unit conversion overhead

[Cristian Ciocaltea]

The ropll_tmds_cfg table used to identify the configuration params for
the supported rates expects the search keys - bit_rate field - to be
provided in hHz rather than Hz (1 hHz = 100 Hz).  This requires multiple
conversions between these units being performed at runtime.

Improve implementation clarity and efficiency by consistently using the
Hz units throughout driver's internal data structures and functions.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 61 +++++++++++------------
 1 file changed, 30 insertions(+), 31 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index fdac60bb87510002626735e0e9f18ad5de9a6642..991ff4a2e7613dd4bb2c9cf5443d44794d0eb752 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -330,7 +330,7 @@ enum dp_link_rate {
 };
 
 struct ropll_config {
-	u32 bit_rate;
+	u32 rate;
 	u8 pms_mdiv;
 	u8 pms_mdiv_afc;
 	u8 pms_pdiv;
@@ -418,45 +418,45 @@ struct rk_hdptx_phy {
 };
 
 static const struct ropll_config ropll_tmds_cfg[] = {
-	{ 5940000, 124, 124, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0,
+	{ 594000000, 124, 124, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0,
 	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 3712500, 155, 155, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0,
+	{ 371250000, 155, 155, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0,
 	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 2970000, 124, 124, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0,
+	{ 297000000, 124, 124, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0,
 	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 1620000, 135, 135, 1, 1, 3, 1, 1, 0, 1, 1, 1, 1, 4, 0, 3, 5, 5, 0x10,
+	{ 162000000, 135, 135, 1, 1, 3, 1, 1, 0, 1, 1, 1, 1, 4, 0, 3, 5, 5, 0x10,
 	  1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 1856250, 155, 155, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0,
+	{ 185625000, 155, 155, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0,
 	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 1540000, 193, 193, 1, 1, 5, 1, 1, 1, 1, 1, 1, 1, 193, 1, 32, 2, 1,
+	{ 154000000, 193, 193, 1, 1, 5, 1, 1, 1, 1, 1, 1, 1, 193, 1, 32, 2, 1,
 	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 1485000, 0x7b, 0x7b, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 4, 0, 3, 5, 5,
+	{ 148500000, 0x7b, 0x7b, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 4, 0, 3, 5, 5,
 	  0x10, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 1462500, 122, 122, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 244, 1, 16, 2, 1, 1,
+	{ 146250000, 122, 122, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 244, 1, 16, 2, 1, 1,
 	  1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 1190000, 149, 149, 1, 1, 5, 1, 1, 1, 1, 1, 1, 1, 149, 1, 16, 2, 1, 1,
+	{ 119000000, 149, 149, 1, 1, 5, 1, 1, 1, 1, 1, 1, 1, 149, 1, 16, 2, 1, 1,
 	  1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 1065000, 89, 89, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 89, 1, 16, 1, 0, 1,
+	{ 106500000, 89, 89, 1, 1, 3, 1, 1, 1, 1, 1, 1, 1, 89, 1, 16, 1, 0, 1,
 	  1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 1080000, 135, 135, 1, 1, 5, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0,
+	{ 108000000, 135, 135, 1, 1, 5, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0,
 	  0x14, 0x18, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 855000, 214, 214, 1, 1, 11, 1, 1, 1, 1, 1, 1, 1, 214, 1, 16, 2, 1,
+	{ 85500000, 214, 214, 1, 1, 11, 1, 1, 1, 1, 1, 1, 1, 214, 1, 16, 2, 1,
 	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 835000, 105, 105, 1, 1, 5, 1, 1, 1, 1, 1, 1, 1, 42, 1, 16, 1, 0,
+	{ 83500000, 105, 105, 1, 1, 5, 1, 1, 1, 1, 1, 1, 1, 42, 1, 16, 1, 0,
 	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 928125, 155, 155, 1, 1, 7, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0,
+	{ 92812500, 155, 155, 1, 1, 7, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0,
 	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 742500, 124, 124, 1, 1, 7, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0,
+	{ 74250000, 124, 124, 1, 1, 7, 1, 1, 1, 1, 1, 1, 1, 62, 1, 16, 5, 0,
 	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 650000, 162, 162, 1, 1, 11, 1, 1, 1, 1, 1, 1, 1, 54, 0, 16, 4, 1,
+	{ 65000000, 162, 162, 1, 1, 11, 1, 1, 1, 1, 1, 1, 1, 54, 0, 16, 4, 1,
 	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 337500, 0x70, 0x70, 1, 1, 0xf, 1, 1, 1, 1, 1, 1, 1, 0x2, 0, 0x01, 5,
+	{ 33750000, 0x70, 0x70, 1, 1, 0xf, 1, 1, 1, 1, 1, 1, 1, 0x2, 0, 0x01, 5,
 	  1, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 400000, 100, 100, 1, 1, 11, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0,
+	{ 40000000, 100, 100, 1, 1, 11, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0,
 	  0x14, 0x18, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 270000, 0x5a, 0x5a, 1, 1, 0xf, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0,
+	{ 27000000, 0x5a, 0x5a, 1, 1, 0xf, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0,
 	  0x14, 0x18, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
-	{ 251750, 84, 84, 1, 1, 0xf, 1, 1, 1, 1, 1, 1, 1, 168, 1, 16, 4, 1, 1,
+	{ 25175000, 84, 84, 1, 1, 0xf, 1, 1, 1, 1, 1, 1, 1, 168, 1, 16, 4, 1, 1,
 	  1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
 };
 
@@ -902,10 +902,10 @@ static void rk_hdptx_phy_disable(struct rk_hdptx_phy *hdptx)
 	regmap_write(hdptx->grf, GRF_HDPTX_CON0, val);
 }
 
-static bool rk_hdptx_phy_clk_pll_calc(unsigned int data_rate,
+static bool rk_hdptx_phy_clk_pll_calc(unsigned long rate,
 				      struct ropll_config *cfg)
 {
-	const unsigned int fout = data_rate / 2, fref = 24000;
+	const unsigned int fout = rate / 200, fref = 24000;
 	unsigned long k = 0, lc, k_sub, lc_sub;
 	unsigned int fvco, sdc;
 	u32 mdiv, sdiv, n = 8;
@@ -975,16 +975,16 @@ static bool rk_hdptx_phy_clk_pll_calc(unsigned int data_rate,
 }
 
 static int rk_hdptx_ropll_tmds_cmn_config(struct rk_hdptx_phy *hdptx,
-					  unsigned int rate)
+					  unsigned long rate)
 {
 	const struct ropll_config *cfg = NULL;
 	struct ropll_config rc = {0};
 	int i;
 
-	hdptx->rate = rate * 100;
+	hdptx->rate = rate;
 
 	for (i = 0; i < ARRAY_SIZE(ropll_tmds_cfg); i++)
-		if (rate == ropll_tmds_cfg[i].bit_rate) {
+		if (rate == ropll_tmds_cfg[i].rate) {
 			cfg = &ropll_tmds_cfg[i];
 			break;
 		}
@@ -1122,7 +1122,7 @@ static int rk_hdptx_phy_consumer_get(struct rk_hdptx_phy *hdptx)
 	} else {
 		rate = hdptx->tmds_char_rate ?: hdptx->rate;
 		if (rate) {
-			ret = rk_hdptx_ropll_tmds_cmn_config(hdptx, rate / 100);
+			ret = rk_hdptx_ropll_tmds_cmn_config(hdptx, rate);
 			if (ret)
 				goto dec_usage;
 		}
@@ -1833,18 +1833,17 @@ static unsigned long rk_hdptx_phy_clk_recalc_rate(struct clk_hw *hw,
 static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 					unsigned long *parent_rate)
 {
-	u32 bit_rate = rate / 100;
 	int i;
 
 	if (rate > HDMI20_MAX_RATE)
 		return rate;
 
 	for (i = 0; i < ARRAY_SIZE(ropll_tmds_cfg); i++)
-		if (bit_rate == ropll_tmds_cfg[i].bit_rate)
+		if (rate == ropll_tmds_cfg[i].rate)
 			break;
 
 	if (i == ARRAY_SIZE(ropll_tmds_cfg) &&
-	    !rk_hdptx_phy_clk_pll_calc(bit_rate, NULL))
+	    !rk_hdptx_phy_clk_pll_calc(rate, NULL))
 		return -EINVAL;
 
 	return rate;
@@ -1865,7 +1864,7 @@ static int rk_hdptx_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 		rate = hdptx->tmds_char_rate;
 	}
 
-	return rk_hdptx_ropll_tmds_cmn_config(hdptx, rate / 100);
+	return rk_hdptx_ropll_tmds_cmn_config(hdptx, rate);
 }
 
 static const struct clk_ops hdptx_phy_clk_ops = {

-- 
2.48.1