* Re: [PATCH] irqchip/imx-intmux: fix runtime PM teardown on remove
2026-09-14 13:42 [PATCH] irqchip/imx-intmux: fix runtime PM teardown on remove Guangshuo Li
@ 2026-09-16 13:45 ` Radu Rendec
2026-09-16 15:38 ` Frank Li
2026-09-18 1:03 ` Radu Rendec
2 siblings, 0 replies; 4+ messages in thread
From: Radu Rendec @ 2026-09-16 13:45 UTC (permalink / raw)
To: Guangshuo Li, Thomas Gleixner, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Joakim Zhang,
Marc Zyngier, Zhipeng Wang
Cc: stable, linux-kernel, imx, linux-arm-kernel
On Mon, 2026-09-14 at 21:42 +0800, Guangshuo Li wrote:
> imx_intmux_probe() enables the IPG clock and then drops its runtime PM
> reference with pm_runtime_put(). With CONFIG_PM enabled, the runtime
> suspend callback disables the IPG clock. With CONFIG_PM disabled, the
> clock remains enabled after probe.
>
> imx_intmux_remove() accesses the CHANIER registers without first making
> sure that the device is runtime active. The device may therefore be
> runtime suspended with the IPG clock disabled when these registers are
> accessed. In addition, the remove path only calls pm_runtime_disable()
> and does not balance the clock enable when CONFIG_PM is disabled.
>
> Resume the device and acquire a runtime PM reference before accessing
> the registers. If resume fails, skip the register accesses but still
> tear down the chained handlers and IRQ domains. Disable runtime PM
> afterwards, drop the acquired reference without triggering another
> runtime suspend, and explicitly disable the IPG clock.
>
> This keeps the clock enabled while the hardware registers are accessed
> and balances the clk_prepare_enable() performed during probe for both
> CONFIG_PM configurations.
>
> This issue was found by manual code inspection.
>
> Fixes: bb403111e017 ("irqchip/imx-intmux: Implement intmux runtime power management")
> Cc: stable@vger.kernel.org
> Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
> ---
> drivers/irqchip/irq-imx-intmux.c | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
+ Zhipeng
The patch looks good to me but I'm wondering if it's not a better idea
to fix it in a similar manner to the imx-irqsteer driver. Please see
https://lore.kernel.org/all/20260821101039.4037925-7-Zhipeng.wang_1@oss.nxp.com/
The two drivers are already similar, so I think it makes sense to keep
them aligned. It would also address some of the issues that sashiko
flagged (probably, I haven't looked very closely).
> diff --git a/drivers/irqchip/irq-imx-intmux.c b/drivers/irqchip/irq-imx-intmux.c
> index 47c2681d138a..de2a8f98f625 100644
> --- a/drivers/irqchip/irq-imx-intmux.c
> +++ b/drivers/irqchip/irq-imx-intmux.c
> @@ -288,12 +288,16 @@ static int imx_intmux_probe(struct platform_device *pdev)
> static void imx_intmux_remove(struct platform_device *pdev)
> {
> struct intmux_data *data = platform_get_drvdata(pdev);
> - int i;
> + int i, ret;
> +
> + ret = pm_runtime_resume_and_get(&pdev->dev);
> + if (ret < 0)
> + dev_warn(&pdev->dev, "failed to resume device: %d\n", ret);
>
> for (i = 0; i < data->channum; i++) {
> /* disable all interrupt sources of this channel */
> - writel_relaxed(0, data->regs + CHANIER(i));
> -
> + if (ret >= 0)
> + writel_relaxed(0, data->regs + CHANIER(i));
> irq_set_chained_handler_and_data(data->irqchip_data[i].irq,
> NULL, NULL);
>
> @@ -301,6 +305,11 @@ static void imx_intmux_remove(struct platform_device *pdev)
> }
>
> pm_runtime_disable(&pdev->dev);
> + if (ret >= 0) {
> + pm_runtime_put_noidle(&pdev->dev);
> + clk_disable_unprepare(data->ipg_clk);
> + pm_runtime_set_suspended(&pdev->dev);
> + }
> }
>
> #ifdef CONFIG_PM
--
Regards,
Radu
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] irqchip/imx-intmux: fix runtime PM teardown on remove
2026-09-14 13:42 [PATCH] irqchip/imx-intmux: fix runtime PM teardown on remove Guangshuo Li
2026-09-16 13:45 ` Radu Rendec
@ 2026-09-16 15:38 ` Frank Li
2026-09-18 1:03 ` Radu Rendec
2 siblings, 0 replies; 4+ messages in thread
From: Frank Li @ 2026-09-16 15:38 UTC (permalink / raw)
To: Guangshuo Li
Cc: Thomas Gleixner, Radu Rendec, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Joakim Zhang,
Marc Zyngier, linux-kernel, imx, linux-arm-kernel, stable
On Mon, Sep 14, 2026 at 09:42:11PM +0800, Guangshuo Li wrote:
> imx_intmux_probe() enables the IPG clock and then drops its runtime PM
> reference with pm_runtime_put(). With CONFIG_PM enabled, the runtime
> suspend callback disables the IPG clock. With CONFIG_PM disabled, the
> clock remains enabled after probe.
>
> imx_intmux_remove() accesses the CHANIER registers without first making
> sure that the device is runtime active. The device may therefore be
> runtime suspended with the IPG clock disabled when these registers are
> accessed. In addition, the remove path only calls pm_runtime_disable()
> and does not balance the clock enable when CONFIG_PM is disabled.
>
> Resume the device and acquire a runtime PM reference before accessing
> the registers. If resume fails, skip the register accesses but still
> tear down the chained handlers and IRQ domains. Disable runtime PM
> afterwards, drop the acquired reference without triggering another
> runtime suspend, and explicitly disable the IPG clock.
>
> This keeps the clock enabled while the hardware registers are accessed
> and balances the clk_prepare_enable() performed during probe for both
> CONFIG_PM configurations.
>
> This issue was found by manual code inspection.
>
> Fixes: bb403111e017 ("irqchip/imx-intmux: Implement intmux runtime power management")
> Cc: stable@vger.kernel.org
> Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> drivers/irqchip/irq-imx-intmux.c | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/irqchip/irq-imx-intmux.c b/drivers/irqchip/irq-imx-intmux.c
> index 47c2681d138a..de2a8f98f625 100644
> --- a/drivers/irqchip/irq-imx-intmux.c
> +++ b/drivers/irqchip/irq-imx-intmux.c
> @@ -288,12 +288,16 @@ static int imx_intmux_probe(struct platform_device *pdev)
> static void imx_intmux_remove(struct platform_device *pdev)
> {
> struct intmux_data *data = platform_get_drvdata(pdev);
> - int i;
> + int i, ret;
> +
> + ret = pm_runtime_resume_and_get(&pdev->dev);
> + if (ret < 0)
> + dev_warn(&pdev->dev, "failed to resume device: %d\n", ret);
>
> for (i = 0; i < data->channum; i++) {
> /* disable all interrupt sources of this channel */
> - writel_relaxed(0, data->regs + CHANIER(i));
> -
> + if (ret >= 0)
> + writel_relaxed(0, data->regs + CHANIER(i));
> irq_set_chained_handler_and_data(data->irqchip_data[i].irq,
> NULL, NULL);
>
> @@ -301,6 +305,11 @@ static void imx_intmux_remove(struct platform_device *pdev)
> }
>
> pm_runtime_disable(&pdev->dev);
> + if (ret >= 0) {
> + pm_runtime_put_noidle(&pdev->dev);
> + clk_disable_unprepare(data->ipg_clk);
> + pm_runtime_set_suspended(&pdev->dev);
> + }
> }
>
> #ifdef CONFIG_PM
> --
> 2.43.0
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] irqchip/imx-intmux: fix runtime PM teardown on remove
2026-09-14 13:42 [PATCH] irqchip/imx-intmux: fix runtime PM teardown on remove Guangshuo Li
2026-09-16 13:45 ` Radu Rendec
2026-09-16 15:38 ` Frank Li
@ 2026-09-18 1:03 ` Radu Rendec
2 siblings, 0 replies; 4+ messages in thread
From: Radu Rendec @ 2026-09-18 1:03 UTC (permalink / raw)
To: Guangshuo Li, Thomas Gleixner, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Joakim Zhang,
Marc Zyngier, linux-kernel, imx, linux-arm-kernel
Cc: stable
On Mon, 2026-09-14 at 21:42 +0800, Guangshuo Li wrote:
> imx_intmux_probe() enables the IPG clock and then drops its runtime PM
> reference with pm_runtime_put(). With CONFIG_PM enabled, the runtime
> suspend callback disables the IPG clock. With CONFIG_PM disabled, the
> clock remains enabled after probe.
>
> imx_intmux_remove() accesses the CHANIER registers without first making
> sure that the device is runtime active. The device may therefore be
> runtime suspended with the IPG clock disabled when these registers are
> accessed. In addition, the remove path only calls pm_runtime_disable()
> and does not balance the clock enable when CONFIG_PM is disabled.
>
> Resume the device and acquire a runtime PM reference before accessing
> the registers. If resume fails, skip the register accesses but still
> tear down the chained handlers and IRQ domains. Disable runtime PM
> afterwards, drop the acquired reference without triggering another
> runtime suspend, and explicitly disable the IPG clock.
>
> This keeps the clock enabled while the hardware registers are accessed
> and balances the clk_prepare_enable() performed during probe for both
> CONFIG_PM configurations.
>
> This issue was found by manual code inspection.
>
> Fixes: bb403111e017 ("irqchip/imx-intmux: Implement intmux runtime power management")
> Cc: stable@vger.kernel.org
> Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
> ---
> drivers/irqchip/irq-imx-intmux.c | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/irqchip/irq-imx-intmux.c b/drivers/irqchip/irq-imx-intmux.c
> index 47c2681d138a..de2a8f98f625 100644
> --- a/drivers/irqchip/irq-imx-intmux.c
> +++ b/drivers/irqchip/irq-imx-intmux.c
> @@ -288,12 +288,16 @@ static int imx_intmux_probe(struct platform_device *pdev)
> static void imx_intmux_remove(struct platform_device *pdev)
> {
> struct intmux_data *data = platform_get_drvdata(pdev);
> - int i;
> + int i, ret;
> +
> + ret = pm_runtime_resume_and_get(&pdev->dev);
> + if (ret < 0)
> + dev_warn(&pdev->dev, "failed to resume device: %d\n", ret);
>
> for (i = 0; i < data->channum; i++) {
> /* disable all interrupt sources of this channel */
> - writel_relaxed(0, data->regs + CHANIER(i));
> -
> + if (ret >= 0)
> + writel_relaxed(0, data->regs + CHANIER(i));
> irq_set_chained_handler_and_data(data->irqchip_data[i].irq,
> NULL, NULL);
>
> @@ -301,6 +305,11 @@ static void imx_intmux_remove(struct platform_device *pdev)
> }
>
> pm_runtime_disable(&pdev->dev);
> + if (ret >= 0) {
> + pm_runtime_put_noidle(&pdev->dev);
> + clk_disable_unprepare(data->ipg_clk);
> + pm_runtime_set_suspended(&pdev->dev);
> + }
> }
>
> #ifdef CONFIG_PM
Reviewed-by: Radu Rendec <radu@rendec.net>
^ permalink raw reply [flat|nested] 4+ messages in thread