* [PATCH] arm64: dts: ti: k3-j721s2-common-proc-board: Add QSPI flash partition details
@ 2026-01-21 5:18 Anurag Dutta
2026-01-22 3:23 ` Kumar, Udit
0 siblings, 1 reply; 4+ messages in thread
From: Anurag Dutta @ 2026-01-21 5:18 UTC (permalink / raw)
To: nm, vigneshr, kristo
Cc: linux-arm-kernel, devicetree, linux-kernel, u-kumar1,
gehariprasath, a-dutta
J721S2 EVM has MT25QU512AB 64 MiB Quad SPI NOR flash connected
to OSPI1. Add the partition information as per bootloader.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
---
Test logs: https://gist.github.com/anuragdutta731/b65f63f22c69317d714b65a201438cbc
.../dts/ti/k3-j721s2-common-proc-board.dts | 41 +++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index 4fea99519113..7faf9367dbb2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -530,6 +530,47 @@ flash@0 {
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "qspi.tiboot3";
+ reg = <0x0 0x80000>;
+ };
+
+ partition@80000 {
+ label = "qspi.tispl";
+ reg = <0x80000 0x200000>;
+ };
+
+ partition@280000 {
+ label = "qspi.u-boot";
+ reg = <0x280000 0x400000>;
+ };
+
+ partition@680000 {
+ label = "qspi.env";
+ reg = <0x680000 0x40000>;
+ };
+
+ partition@6c0000 {
+ label = "qspi.env.backup";
+ reg = <0x6c0000 0x40000>;
+ };
+
+ partition@800000 {
+ label = "qspi.rootfs";
+ reg = <0x800000 0x37c0000>;
+ };
+
+ partition@3fc0000 {
+ label = "qspi.phypattern";
+ reg = <0x3fc0000 0x40000>;
+ };
+ };
};
};
--
2.34.1
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] arm64: dts: ti: k3-j721s2-common-proc-board: Add QSPI flash partition details
2026-01-21 5:18 [PATCH] arm64: dts: ti: k3-j721s2-common-proc-board: Add QSPI flash partition details Anurag Dutta
@ 2026-01-22 3:23 ` Kumar, Udit
2026-01-30 8:00 ` Dutta, Anurag
0 siblings, 1 reply; 4+ messages in thread
From: Kumar, Udit @ 2026-01-22 3:23 UTC (permalink / raw)
To: Anurag Dutta, nm, vigneshr, kristo
Cc: linux-arm-kernel, devicetree, linux-kernel, gehariprasath, u-kumar1
On 1/21/2026 10:48 AM, Anurag Dutta wrote:
> J721S2 EVM has MT25QU512AB 64 MiB Quad SPI NOR flash connected
> to OSPI1. Add the partition information as per bootloader.
>
> Signed-off-by: Anurag Dutta <a-dutta@ti.com>
> ---
> Test logs: https://gist.github.com/anuragdutta731/b65f63f22c69317d714b65a201438cbc
Thanks for logs, but these are for boot-loader and I don't think u-boot
consumes partition details.
could you share logs for kernel as well.
>
> .../dts/ti/k3-j721s2-common-proc-board.dts | 41 +++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> index 4fea99519113..7faf9367dbb2 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> @@ -530,6 +530,47 @@ flash@0 {
> cdns,tchsh-ns = <60>;
> cdns,tslch-ns = <60>;
> cdns,read-delay = <2>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "qspi.tiboot3";
> + reg = <0x0 0x80000>;
> + };
> +
> + partition@80000 {
> + label = "qspi.tispl";
> + reg = <0x80000 0x200000>;
> + };
> +
> + partition@280000 {
> + label = "qspi.u-boot";
> + reg = <0x280000 0x400000>;
> + };
> +
> + partition@680000 {
> + label = "qspi.env";
> + reg = <0x680000 0x40000>;
> + };
> +
> + partition@6c0000 {
> + label = "qspi.env.backup";
> + reg = <0x6c0000 0x40000>;
> + };
> +
> + partition@800000 {
> + label = "qspi.rootfs";
> + reg = <0x800000 0x37c0000>;
> + };
> +
> + partition@3fc0000 {
> + label = "qspi.phypattern";
> + reg = <0x3fc0000 0x40000>;
> + };
> + };
> };
> };
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] arm64: dts: ti: k3-j721s2-common-proc-board: Add QSPI flash partition details
2026-01-22 3:23 ` Kumar, Udit
@ 2026-01-30 8:00 ` Dutta, Anurag
2026-02-03 5:05 ` Kumar, Udit
0 siblings, 1 reply; 4+ messages in thread
From: Dutta, Anurag @ 2026-01-30 8:00 UTC (permalink / raw)
To: Kumar, Udit, nm, vigneshr, kristo
Cc: linux-arm-kernel, devicetree, linux-kernel, gehariprasath
On 22-01-2026 08:53, Kumar, Udit wrote:
>
> On 1/21/2026 10:48 AM, Anurag Dutta wrote:
>> J721S2 EVM has MT25QU512AB 64 MiB Quad SPI NOR flash connected
>> to OSPI1. Add the partition information as per bootloader.
>>
>> Signed-off-by: Anurag Dutta <a-dutta@ti.com>
>> ---
>> Test logs:
>> https://gist.github.com/anuragdutta731/b65f63f22c69317d714b65a201438cbc
>
>
> Thanks for logs, but these are for boot-loader and I don't think
> u-boot consumes partition details.
>
> could you share logs for kernel as well.
>
Hi Udit
Here are kernel logs :
https://gist.github.com/anuragdutta731/d4ee38df3ed8889f44bf28ab163b1baf
>
>
>>
>> .../dts/ti/k3-j721s2-common-proc-board.dts | 41 +++++++++++++++++++
>> 1 file changed, 41 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> index 4fea99519113..7faf9367dbb2 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> @@ -530,6 +530,47 @@ flash@0 {
>> cdns,tchsh-ns = <60>;
>> cdns,tslch-ns = <60>;
>> cdns,read-delay = <2>;
>> +
>> + partitions {
>> + compatible = "fixed-partitions";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + partition@0 {
>> + label = "qspi.tiboot3";
>> + reg = <0x0 0x80000>;
>> + };
>> +
>> + partition@80000 {
>> + label = "qspi.tispl";
>> + reg = <0x80000 0x200000>;
>> + };
>> +
>> + partition@280000 {
>> + label = "qspi.u-boot";
>> + reg = <0x280000 0x400000>;
>> + };
>> +
>> + partition@680000 {
>> + label = "qspi.env";
>> + reg = <0x680000 0x40000>;
>> + };
>> +
>> + partition@6c0000 {
>> + label = "qspi.env.backup";
>> + reg = <0x6c0000 0x40000>;
>> + };
>> +
>> + partition@800000 {
>> + label = "qspi.rootfs";
>> + reg = <0x800000 0x37c0000>;
>> + };
>> +
>> + partition@3fc0000 {
>> + label = "qspi.phypattern";
>> + reg = <0x3fc0000 0x40000>;
>> + };
>> + };
>> };
>> };
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] arm64: dts: ti: k3-j721s2-common-proc-board: Add QSPI flash partition details
2026-01-30 8:00 ` Dutta, Anurag
@ 2026-02-03 5:05 ` Kumar, Udit
0 siblings, 0 replies; 4+ messages in thread
From: Kumar, Udit @ 2026-02-03 5:05 UTC (permalink / raw)
To: Dutta, Anurag, nm, vigneshr, kristo
Cc: linux-arm-kernel, devicetree, linux-kernel, gehariprasath
On 1/30/2026 1:30 PM, Dutta, Anurag wrote:
>
> On 22-01-2026 08:53, Kumar, Udit wrote:
>>
>> On 1/21/2026 10:48 AM, Anurag Dutta wrote:
>>> J721S2 EVM has MT25QU512AB 64 MiB Quad SPI NOR flash connected
>>> to OSPI1. Add the partition information as per bootloader.
>>>
>>> Signed-off-by: Anurag Dutta <a-dutta@ti.com>
>>> ---
>>> Test logs:
>>> https://gist.github.com/anuragdutta731/b65f63f22c69317d714b65a201438cbc
>>
>>
>> Thanks for logs, but these are for boot-loader and I don't think
>> u-boot consumes partition details.
>>
>> could you share logs for kernel as well.
>>
> Hi Udit
> Here are kernel logs :
> https://gist.github.com/anuragdutta731/d4ee38df3ed8889f44bf28ab163b1baf
Thanks Anurag,
I think, you need qspi.phypattern under bootph-all, as I see u-boot
stage will/may do phy-tuning.
While at this, same thing needs to be cascaded to ospi flash as well.
>>
>>
>>>
>>> .../dts/ti/k3-j721s2-common-proc-board.dts | 41
>>> +++++++++++++++++++
>>> 1 file changed, 41 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> index 4fea99519113..7faf9367dbb2 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> @@ -530,6 +530,47 @@ flash@0 {
>>> cdns,tchsh-ns = <60>;
>>> cdns,tslch-ns = <60>;
>>> cdns,read-delay = <2>;
>>> +
>>> + partitions {
>>> + compatible = "fixed-partitions";
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> +
>>> + partition@0 {
>>> + label = "qspi.tiboot3";
>>> + reg = <0x0 0x80000>;
>>> + };
>>> +
>>> + partition@80000 {
>>> + label = "qspi.tispl";
>>> + reg = <0x80000 0x200000>;
>>> + };
>>> +
>>> + partition@280000 {
>>> + label = "qspi.u-boot";
>>> + reg = <0x280000 0x400000>;
>>> + };
>>> +
>>> + partition@680000 {
>>> + label = "qspi.env";
>>> + reg = <0x680000 0x40000>;
>>> + };
>>> +
>>> + partition@6c0000 {
>>> + label = "qspi.env.backup";
>>> + reg = <0x6c0000 0x40000>;
>>> + };
>>> +
>>> + partition@800000 {
>>> + label = "qspi.rootfs";
>>> + reg = <0x800000 0x37c0000>;
>>> + };
>>> +
>>> + partition@3fc0000 {
>>> + label = "qspi.phypattern";
>>> + reg = <0x3fc0000 0x40000>;
>>> + };
>>> + };
>>> };
>>> };
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2026-02-03 5:06 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-01-21 5:18 [PATCH] arm64: dts: ti: k3-j721s2-common-proc-board: Add QSPI flash partition details Anurag Dutta
2026-01-22 3:23 ` Kumar, Udit
2026-01-30 8:00 ` Dutta, Anurag
2026-02-03 5:05 ` Kumar, Udit
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®