Re: [PATCH v4 1/2] ARM: dts: microchip: sama7g5: Adjust clock xtal phandle

[Claudiu Beznea <claudiu.beznea@tuxon.dev>]

Hi, Ryan,

On 23.05.2025 23:24, Ryan.Wanner@microchip.com wrote:
> From: Ryan Wanner <Ryan.Wanner@microchip.com>
> 
> Adjust clock xtal phandles to match the new xtal phandle formatting.
> 
> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
> ---
>  arch/arm/boot/dts/microchip/at91-sama7g5ek.dts | 18 ++++++++----------
>  arch/arm/boot/dts/microchip/sama7g5.dtsi       |  6 ++++--
>  2 files changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
> index 2543599013b1..79bf58f8c02e 100644
> --- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
> @@ -35,16 +35,6 @@ aliases {
>  		i2c2 = &i2c9;
>  	};
>  
> -	clocks {
> -		slow_xtal {
> -			clock-frequency = <32768>;
> -		};
> -
> -		main_xtal {
> -			clock-frequency = <24000000>;
> -		};
> -	};
> -
>  	gpio-keys {
>  		compatible = "gpio-keys";
>  
> @@ -512,6 +502,10 @@ spi11: spi@400 {
>  	};
>  };
>  
> +&main_xtal {
> +	clock-frequency = <24000000>;
> +};
> +

Please keep it alphanumerically sorted.

>  &gmac0 {
>  	#address-cells = <1>;
>  	#size-cells = <0>;
> @@ -917,3 +911,7 @@ &vddout25 {
>  	vin-supply = <&vdd_3v3>;
>  	status = "okay";
>  };
> +
> +&slow_xtal {
> +	clock-frequency = <32768>;
> +};

Same for this one.

> diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
> index 17bcdcf0cf4a..411db7e375a6 100644
> --- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
> +++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
> @@ -117,13 +117,15 @@ map1 {
>  	};
>  
>  	clocks {
> -		slow_xtal: slow_xtal {
> +		slow_xtal: clock-slowxtal {
>  			compatible = "fixed-clock";
> +			clock-output-names = "slow_xtal";
>  			#clock-cells = <0>;
>  		};
>  
> -		main_xtal: main_xtal {
> +		main_xtal: clock-mainxtal {
>  			compatible = "fixed-clock";
> +			clock-output-names = "main_xtal";
>  			#clock-cells = <0>;
>  		};

While at it, can you please also address usb_clk ?

Thank you,
Claudiu