Re: 2.6.28-git8: tg3 doesn't work due to firmware not loading (-git7 is ok)

[Valdis.Kletnieks@vt.edu]

[-- Attachment #1: Type: text/plain, Size: 1574 bytes --]

On Sun, 11 Jan 2009 13:49:37 PST, David Miller said:
> From: Valdis.Kletnieks@vt.edu
> Date: Sun, 11 Jan 2009 11:48:22 -0500
> 
> > One unanswered question:  What do we expect the system to do if they have this
> > patch, TIGON3=y, FIRMWARE_IN_KERNEL=n, and configure a netconsole for boot
> > messages?  I'm *hoping* the answer is "the netconsole doesn't come up at boot,
> > but can be re-enabled via the /sys/kernel/config/netconsole interface after
> > you've done an 'ifconfig eth0 up' or similar, or do a 'modprobe netconsole'.
> > 
> > Those seem like reasonable semantics to me - anybody got a different opinion?
> 
> Even better, how about nfsroot?  There is no "later", either you
> can mount to root filesystem or you fail.

I don't see any sane way for an nfsroot to work unless you've built the kernel
with TIGON3=y, and FIRMWARE=y.  Anything else is just crazy talk.  For that
case, I'd suggest we just do this:

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>

--- linux-2.6.28-mmotm0109/Documentation/filesystems/nfsroot.txt.dist	2008-12-24 18:26:37.000000000 -0500
+++ linux-2.6.28-mmotm0109/Documentation/filesystems/nfsroot.txt	2009-01-11 17:27:31.000000000 -0500
@@ -30,6 +30,9 @@ In the networking options, kernel level 
 along with the types of autoconfiguration to support. Selecting all of
 DHCP, BOOTP and RARP is safe.
 
+In addition, your network interface driver must be selected as built-in,
+and if the card is a Tigon3 or other card that requires a firmware load
+to become functional, you need to select FIRMWARE_IN_KERNEL.
 
 
 



[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]