* [PATCH v6 0/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset
@ 2025-09-28 5:41 Chu Guangqing
2025-09-28 5:41 ` [PATCH v6 1/1] " Chu Guangqing
2025-09-29 6:31 ` [PATCH v7 0/1] " Chu Guangqing
0 siblings, 2 replies; 14+ messages in thread
From: Chu Guangqing @ 2025-09-28 5:41 UTC (permalink / raw)
To: tzimmermann, maarten.lankhorst, mripard, airlied, simona
Cc: linux-kernel, dri-devel, Chu Guangqing
v6:
- simplify to return drm_atomic_helper_check_plane_state()
- remove empty line
- remove call drm_probe_ddc and smidebug
- replace drm_err with drm_dbg_kms
- add callback .disable
v5:
- remove extra level of subdiretories, change to driver/gpu/drm/yhgch
- remove else from > + else if (!new_plane_state->visible)
- remove extra check in function yhgch_plane_atomic_check
- remove the extra parentheses
- change the author like other modules
- use drm_edit_read function instead drm_get_edit
- remove debug info drm_warn call
- rename function name smi_connector_helper_detect_from_ddc to
yhgch_connector_helper_detect_from_ddc, remove extra return statement.
(https://lore.kernel.org/all/20250925091715.12739-1-chuguangqing@inspur.com/)
v4:
- remove VRAM helpers from Kconfig
- use the coding style in ast/mgag200 for the DDC
- use plane_state->dst instead of crtc_h/w/x/y.
- delete duplicate framebuffer's atomic_check.
- use FIELD_PREP() directly.
- use dev->mode_config.
- delete unnecessary drm_atomic_helper_shutdown call
- add AUTHOR
- using .enable instead
(https://lore.kernel.org/all/20250924064954.3921-1-chuguangqing@inspur.com/)
v3:
- The order of the code blocks has been adjusted, and the "warn-on" branch
has been removed.
- removed the related formats for the alpha channel.
- removed the atomic_flush function.
- have removed the empty line.
- have removed the error message here.
- replaced it with the drmm_encoder_init function.
(https://lore.kernel.org/all/20250910022311.2655-1-chuguangqing@inspur.com/)
v2:
- Delete unnecessary comments
- Delete unnecessary branch
- Use drm_atomic_helper_check_plane_state
- remove the alpha formats form this list.
- use w,h rather than x, y
- delete type casting
- use a simple call to drm_atomic_helper_shutdown()
- delete yhgch_load function
- delete vblanking code
- delete unneeded i2c type
(https://lore.kernel.org/all/20250903054533.68540-1-chuguangqing@inspur.com/)
v1:
(https://lore.kernel.org/all/20250808053508.52202-1-chuguangqing@inspur.com/)
Chu Guangqing (1):
[DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset
MAINTAINERS | 5 +
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/yhgch/Kconfig | 11 +
drivers/gpu/drm/yhgch/Makefile | 4 +
drivers/gpu/drm/yhgch/yhgch_drm_de.c | 407 +++++++++++++++++++++++++
drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 310 +++++++++++++++++++
drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 ++++
drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++
drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++
drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 134 ++++++++
11 files changed, 1247 insertions(+)
create mode 100644 drivers/gpu/drm/yhgch/Kconfig
create mode 100644 drivers/gpu/drm/yhgch/Makefile
create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c
create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c
create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h
create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c
create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h
create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c
--
2.43.5
^ permalink raw reply [flat|nested] 14+ messages in thread* [PATCH v6 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-28 5:41 [PATCH v6 0/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset Chu Guangqing @ 2025-09-28 5:41 ` Chu Guangqing 2025-09-28 21:43 ` Dmitry Baryshkov 2025-09-29 6:31 ` [PATCH v7 0/1] " Chu Guangqing 1 sibling, 1 reply; 14+ messages in thread From: Chu Guangqing @ 2025-09-28 5:41 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona Cc: linux-kernel, dri-devel, Chu Guangqing add support for Yhgc BMC soc chipset Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> --- MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 11 + drivers/gpu/drm/yhgch/Makefile | 4 + drivers/gpu/drm/yhgch/yhgch_drm_de.c | 407 +++++++++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 310 +++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 ++++ drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 134 ++++++++ 11 files changed, 1247 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c diff --git a/MAINTAINERS b/MAINTAINERS index 520fb4e379a3..18fd2e2fcb81 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -27781,6 +27781,11 @@ S: Maintained F: Documentation/input/devices/yealink.rst F: drivers/input/misc/yealink.* +YHGC DRM DRIVER +M: chuguangqing <chuguangqing@inspur.com> +S: Maintained +F: drivers/gpu/drm/yhgch + Z8530 DRIVER FOR AX.25 M: Joerg Reuter <jreuter@yaina.de> L: linux-hams@vger.kernel.org diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index f7ea8e895c0c..8e0b1d12c81f 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" source "drivers/gpu/drm/imagination/Kconfig" +source "drivers/gpu/drm/yhgch/Kconfig" + config DRM_HYPERV tristate "DRM Support for Hyper-V synthetic video device" depends on DRM && PCI && HYPERV diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 4dafbdc8f86a..f344e0173b29 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -231,6 +231,7 @@ obj-y += solomon/ obj-$(CONFIG_DRM_SPRD) += sprd/ obj-$(CONFIG_DRM_LOONGSON) += loongson/ obj-$(CONFIG_DRM_POWERVR) += imagination/ +obj-$(CONFIG_DRM_YHGCH) += yhgch/ # Ensure drm headers are self-contained and pass kernel-doc hdrtest-files := \ diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig new file mode 100644 index 000000000000..695d29409444 --- /dev/null +++ b/drivers/gpu/drm/yhgch/Kconfig @@ -0,0 +1,11 @@ +config DRM_YHGCH + tristate "DRM Support for Yhgch BMC" + depends on DRM && PCI && MMU + select DRM_CLIENT_SELECTION + select DRM_KMS_HELPER + select DRM_GEM_SHMEM_HELPER + help + Choose this option if you have a Yhgch soc chipset. + If M is selected the module will be called yhgch-drm. + IF Y is selected the module will be built into the kernel. + IF N is selected the module will be excluded from the kernel. diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile new file mode 100644 index 000000000000..30de2fd27f18 --- /dev/null +++ b/drivers/gpu/drm/yhgch/Makefile @@ -0,0 +1,4 @@ +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o + +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o + diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch_drm_de.c new file mode 100644 index 000000000000..de6dbd5acca7 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_de.c @@ -0,0 +1,407 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <drm/drm_atomic.h> +#include <drm/drm_gem_atomic_helper.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_gem_shmem_helper.h> +#include <drm/drm_format_helper.h> +#include <drm/drm_damage_helper.h> +#include <drm/drm_fourcc.h> + +#include <drm/drm_vblank.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +struct yhgch_dislay_pll_config { + u64 hdisplay; + u64 vdisplay; + u32 pll1_config_value; + u32 pll2_config_value; +}; + +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, +}; + +static int yhgch_plane_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, + plane); + struct drm_framebuffer *fb = new_plane_state->fb; + struct drm_crtc_state *new_crtc_state = NULL; + + if (!fb) + return 0; + + if (new_plane_state->crtc) + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); + + return drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, + DRM_PLANE_NO_SCALING, + DRM_PLANE_NO_SCALING, + false, true); +} + +static void yhgch_handle_damage(void __iomem *addr_base, struct iosys_map *src, + struct drm_framebuffer *fb, + struct drm_rect *clip) +{ + struct iosys_map dst; + + iosys_map_set_vaddr_iomem(&dst, addr_base); + iosys_map_incr(&dst, drm_fb_clip_offset(fb->pitches[0], fb->format, clip)); + drm_fb_memcpy(&dst, fb->pitches, src, fb, clip); +} + +static void yhgch_plane_atomic_update(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); + struct drm_framebuffer *fb = plane_state->fb; + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); + struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); + struct drm_atomic_helper_damage_iter iter; + struct drm_rect damage; + u32 reg; + s64 gpu_addr = 0; + u32 line_l; + + if (!plane_state->crtc || !plane_state->fb) + return; + + if (!plane_state->visible) + return; + + drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); + drm_atomic_for_each_plane_damage(&iter, &damage) { + yhgch_handle_damage(priv->vram_base, shadow_plane_state->data, fb, &damage); + } + + fb->pitches[0] = (fb->pitches[0] + 15) & ~15; + + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); + + reg = fb->width * fb->format->cpp[0]; + + line_l = fb->pitches[0]; + writel(FIELD_PREP(YHGCH_CRT_FB_WIDTH_WIDTH_MASK, reg) | + FIELD_PREP(YHGCH_CRT_FB_WIDTH_OFFS_MASK, line_l), + priv->mmio + YHGCH_CRT_FB_WIDTH); + + /* SET PIXEL FORMAT */ + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, + fb->format->cpp[0] * 8 / 16); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static const u32 channel_formats1[] = { + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, + DRM_FORMAT_XRGB8888, +}; + +static struct drm_plane_funcs yhgch_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, + .reset = drm_atomic_helper_plane_reset, + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, + DRM_GEM_SHADOW_PLANE_FUNCS, +}; + +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { + DRM_GEM_SHADOW_PLANE_HELPER_FUNCS, + .atomic_check = yhgch_plane_atomic_check, + .atomic_update = yhgch_plane_atomic_update, +}; + +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) +{ + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + u32 reg; + + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_DPMS_MASK, dpms); + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; + if (dpms == YHGCH_CRT_DPMS_ON) + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + reg |= YHGCH_CURR_GATE_DISPLAY(1); + yhgch_set_current_gate(priv, reg); + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); +} + +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(0); + reg |= YHGCH_CURR_GATE_DISPLAY(0); + yhgch_set_current_gate(priv, reg); +} + +static enum drm_mode_status +yhgch_crtc_mode_valid(struct drm_crtc *crtc, + const struct drm_display_mode *mode) +{ + size_t i = 0; + int vrefresh = drm_mode_vrefresh(mode); + + if (vrefresh < 59 || vrefresh > 61) + return MODE_NOCLOCK; + + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && + yhgch_pll_table[i].vdisplay == mode->vdisplay) + return MODE_OK; + } + + return MODE_BAD; +} + +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) +{ + u32 val; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + val = readl(priv->mmio + CRT_PLL1_NS); + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); + writel(val, priv->mmio + CRT_PLL1_NS); + + writel(pll, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val = pll & ~(CRT_PLL1_NS_POWERON(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val |= CRT_PLL1_NS_OUTER_BYPASS(1); + writel(val, priv->mmio + CRT_PLL1_NS); +} + +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) +{ + size_t i; + size_t count = ARRAY_SIZE(yhgch_pll_table); + + for (i = 0; i < count; i++) { + if (yhgch_pll_table[i].hdisplay == x && + yhgch_pll_table[i].vdisplay == y) { + *pll1 = yhgch_pll_table[i].pll1_config_value; + *pll2 = yhgch_pll_table[i].pll2_config_value; + return; + } + } + + /* if found none, we use default value */ + *pll1 = CRT_PLL1_NS_25MHZ; + *pll2 = CRT_PLL2_NS_25MHZ; +} + +/* + * This function takes care the extra registers and bit fields required to + * setup a mode in board. + * Explanation about Display Control register: + * FPGA only supports 7 predefined pixel clocks, and clock select is + * in bit 4:0 of new register 0x802a8. + */ +static u32 display_ctrl_adjust(struct drm_device *dev, + struct drm_display_mode *mode, + u32 ctrl) +{ + u64 w, h; + u32 pll1; /* bit[31:0] of PLL */ + u32 pll2; /* bit[63:32] of PLL */ + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + w = mode->hdisplay; + h = mode->vdisplay; + + get_pll_config(w, h, &pll1, &pll2); + writel(pll2, priv->mmio + CRT_PLL2_NS); + set_vclock_yhgch(dev, pll1); + + /* + * yhgch has to set up the top-left and bottom-right + * registers as well. + * Note that normal chip only use those two register for + * auto-centering mode. + */ + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK, 0) | + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK, 0), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); + + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK, h - 1) | + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK, w - 1), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); + + /* + * Assume common fields in ctrl have been properly set before + * calling this function. + * This function only sets the extra fields in ctrl. + */ + + /* Set bit 25 of display controller: Select CRT or VGA clock */ + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; + + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); + + /* clock_phase_polarity is 0 */ + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); + ctrl |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, 2); + + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); + + return ctrl; +} + +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) +{ + u32 val; + struct drm_display_mode *mode = &crtc->state->mode; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + u32 width = mode->hsync_end - mode->hsync_start; + u32 height = mode->vsync_end - mode->vsync_start; + + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); + writel(FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK, mode->htotal - 1) | + FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK, mode->hdisplay - 1), + priv->mmio + YHGCH_CRT_HORZ_TOTAL); + + writel(FIELD_PREP(YHGCH_CRT_HORZ_SYNC_WIDTH_MASK, width) | + FIELD_PREP(YHGCH_CRT_HORZ_SYNC_START_MASK, mode->hsync_start - 1), + priv->mmio + YHGCH_CRT_HORZ_SYNC); + + writel(FIELD_PREP(YHGCH_CRT_VERT_TOTAL_TOTAL_MASK, mode->vtotal - 1) | + FIELD_PREP(YHGCH_CRT_VERT_TOTAL_DISP_END_MASK, mode->vdisplay - 1), + priv->mmio + YHGCH_CRT_VERT_TOTAL); + + writel(FIELD_PREP(YHGCH_CRT_VERT_SYNC_HEIGHT_MASK, height) | + FIELD_PREP(YHGCH_CRT_VERT_SYNC_START_MASK, mode->vsync_start - 1), + priv->mmio + YHGCH_CRT_VERT_SYNC); + + val = FIELD_PREP(YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK, 0); + val |= FIELD_PREP(YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK, 0); + val |= YHGCH_CRT_DISP_CTL_TIMING(1); + val |= YHGCH_CRT_DISP_CTL_PLANE(1); + + display_ctrl_adjust(dev, mode, val); +} + +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + yhgch_set_current_gate(priv, reg); + + /* We can add more initialization as needed. */ +} + +static const struct drm_crtc_funcs yhgch_crtc_funcs = { + .page_flip = drm_atomic_helper_page_flip, + .set_config = drm_atomic_helper_set_config, + .destroy = drm_crtc_cleanup, + .reset = drm_atomic_helper_crtc_reset, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, +}; + +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { + .mode_set_nofb = yhgch_crtc_mode_set_nofb, + .atomic_begin = yhgch_crtc_atomic_begin, + .atomic_enable = yhgch_crtc_atomic_enable, + .atomic_disable = yhgch_crtc_atomic_disable, + .mode_valid = yhgch_crtc_mode_valid, +}; + +int yhgch_de_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_crtc *crtc = &priv->crtc; + struct drm_plane *plane = &priv->primary_plane; + int ret; + + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, + channel_formats1, + ARRAY_SIZE(channel_formats1), + NULL, + DRM_PLANE_TYPE_PRIMARY, + NULL); + if (ret) { + drm_err(dev, "failed to init plane: %d\n", ret); + return ret; + } + + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); + drm_plane_enable_fb_damage_clips(plane); + + ret = drm_crtc_init_with_planes(dev, crtc, plane, + NULL, &yhgch_crtc_funcs, NULL); + if (ret) { + drm_err(dev, "failed to init crtc: %d\n", ret); + return ret; + } + + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); + + return 0; +} diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c new file mode 100644 index 000000000000..2d7588ab8e2c --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/bitfield.h> + +#include <linux/aperture.h> +#include <drm/clients/drm_client_setup.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_fbdev_ttm.h> + +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_fbdev_shmem.h> +#include <drm/drm_gem_shmem_helper.h> +#include <drm/drm_managed.h> +#include <drm/drm_module.h> +#include <drm/drm_vblank.h> + +#include <drm/drm_probe_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +#define MEM_SIZE_RESERVE4KVM 0x200000 + +DEFINE_DRM_GEM_FOPS(yhgch_fops); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + args->width = ALIGN(args->width, 8); + return drm_gem_shmem_dumb_create(file, dev, args); +} + +static struct drm_driver yhgch_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .fops = &yhgch_fops, + .name = "yhgch", + .desc = "yhgch drm driver", + .major = 3, + .minor = 1, + .dumb_create = yhgch_dumb_create, + DRM_FBDEV_SHMEM_DRIVER_OPS, +}; + +static int __maybe_unused yhgch_pm_suspend(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_suspend(drm_dev); +} + +static int __maybe_unused yhgch_pm_resume(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_resume(drm_dev); +} + +static const struct dev_pm_ops yhgch_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, + yhgch_pm_resume) +}; + +static const struct drm_mode_config_funcs yhgch_mode_funcs = { + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, + .fb_create = drm_gem_fb_create_with_dirty, +}; + +static int yhgch_kms_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + int ret; + + ret = drmm_mode_config_init(dev); + if (ret) + return ret; + + dev->mode_config.min_width = 0; + dev->mode_config.min_height = 0; + dev->mode_config.max_width = 1920; + dev->mode_config.max_height = 1200; + dev->mode_config.preferred_depth = 24; + dev->mode_config.prefer_shadow = 1; + dev->mode_config.funcs = &yhgch_mode_funcs; + + ret = yhgch_de_init(priv); + if (ret) { + drm_err(dev, "failed to init de: %d\n", ret); + return ret; + } + + ret = yhgch_vdac_init(priv); + if (ret) { + drm_err(dev, "failed to init vdac: %d\n", ret); + return ret; + } + drm_kms_helper_poll_init(dev); + + return 0; +} + +/* + * It can operate in one of three modes: 0, 1 or Sleep. + */ +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) +{ + unsigned int control_value = 0; + void __iomem *mmio = priv->mmio; + u32 input = 1; + + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) + return; + + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) + input = 0; + + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_MODE_MASK, power_mode); + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_OSC_INPUT_MASK, input); + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); +} + +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) +{ + u32 gate_reg; + u32 mode; + void __iomem *mmio = priv->mmio; + + /* Get current power mode. */ + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; + + switch (mode) { + case YHGCH_PW_MODE_CTL_MODE_MODE0: + gate_reg = YHGCH_MODE0_GATE; + break; + + case YHGCH_PW_MODE_CTL_MODE_MODE1: + gate_reg = YHGCH_MODE1_GATE; + break; + + default: + gate_reg = YHGCH_MODE0_GATE; + break; + } + writel(gate, mmio + gate_reg); +} + +static void yhgch_hw_config(struct yhgch_drm_private *priv) +{ + u32 reg; + + /* On hardware reset, power mode 0 is default. */ + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + + yhgch_set_current_gate(priv, reg); + + /* + * Reset the memory controller. If the memory controller + * is not reset in chip,the system might hang when sw accesses + * the memory.The memory should be resetted after + * changing the MXCLK. + */ + reg = readl(priv->mmio + YHGCH_MISC_CTRL); + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); + writel(reg, priv->mmio + YHGCH_MISC_CTRL); + + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); + + writel(reg, priv->mmio + YHGCH_MISC_CTRL); +} + +static int yhgch_hw_map(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + resource_size_t ioaddr, iosize; + + ioaddr = pci_resource_start(pdev, 1); + iosize = pci_resource_len(pdev, 1); + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); + if (!priv->mmio) { + drm_err(dev, "Cannot map mmio region\n"); + return -ENOMEM; + } + + ioaddr = pci_resource_start(pdev, 0); + iosize = pci_resource_len(pdev, 0); + priv->vram_base = devm_ioremap_wc(dev->dev, ioaddr, iosize); + if (!priv->vram_base) { + drm_err(dev, "Cannot map vram region\n"); + return -ENOMEM; + } + return 0; +} + +static int yhgch_hw_init(struct yhgch_drm_private *priv) +{ + int ret; + + ret = yhgch_hw_map(priv); + if (ret) + return ret; + yhgch_hw_config(priv); + return 0; +} + +static int yhgch_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct yhgch_drm_private *priv; + struct drm_device *dev; + int ret; + + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); + + if (ret) + return ret; + + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, + struct yhgch_drm_private, dev); + + if (IS_ERR(priv)) + return PTR_ERR(priv); + + dev = &priv->dev; + pci_set_drvdata(pdev, dev); + + ret = pcim_enable_device(pdev); + if (ret) { + drm_err(dev, "failed to enable pci device: %d\n", ret); + goto err_return; + } + + ret = yhgch_hw_init(priv); + if (ret) + goto err_return; + + ret = yhgch_kms_init(priv); + if (ret) + goto err_return; + + ret = pci_enable_msi(pdev); + if (ret) + drm_warn(dev, "enabling MSI failed: %d\n", ret); + /* reset all the states of crtc/plane/encoder/connector */ + drm_mode_config_reset(dev); + + ret = drm_dev_register(dev, 0); + if (ret) { + drm_err(dev, "failed to register drv for userspace access: %d\n", + ret); + goto err_return; + } + drm_client_setup(dev, NULL); + + return 0; + +err_return: + return ret; +} + +static void yhgch_pci_remove(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + + drm_dev_unregister(dev); + drm_dev_put(dev); +} + +static void yhgch_pci_shutdown(struct pci_dev *pdev) +{ + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); +} + +static struct pci_device_id yhgch_pci_table[] = { + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, } +}; + +static struct pci_driver yhgch_pci_driver = { + .name = "yhgch-drm", + .id_table = yhgch_pci_table, + .probe = yhgch_pci_probe, + .remove = yhgch_pci_remove, + .shutdown = yhgch_pci_shutdown, + .driver.pm = &yhgch_pm_ops, +}; + +drm_module_pci_driver(yhgch_pci_driver); + +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); +MODULE_AUTHOR("Chu Guangqing <chuguangqing@inspur.com>"); +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("3.1"); diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h new file mode 100644 index 000000000000..1b8b1e5b0a43 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_DRV_H +#define YHGCH_DRM_DRV_H + +#include <linux/gpio/consumer.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> +#include <linux/version.h> +#include <linux/bitfield.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_encoder.h> + +struct yhgch_ddc { + struct yhgch_drm_private *priv; + struct i2c_adapter adapter; + struct i2c_algo_bit_data bit_data; +}; + +struct yhgch_drm_private { + /* hw */ + void __iomem *mmio; + void __iomem *vram_base; + + /* drm */ + struct drm_device dev; + struct drm_plane primary_plane; + struct drm_crtc crtc; + struct drm_encoder encoder; + struct drm_connector connector; +}; + +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) +{ + return container_of(dev, struct yhgch_drm_private, dev); +} + +void yhgch_set_power_mode(struct yhgch_drm_private *priv, + u32 power_mode); +void yhgch_set_current_gate(struct yhgch_drm_private *priv, + u32 gate); + +int yhgch_de_init(struct yhgch_drm_private *priv); +int yhgch_vdac_init(struct yhgch_drm_private *priv); +int yhgch_mm_init(struct yhgch_drm_private *yhgch); +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args); + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c new file mode 100644 index 000000000000..7bbe9a0540d4 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_probe_helper.h> + +#include <drm/drm_managed.h> + +#include "yhgch_drm_drv.h" + +#define GPIO_DATA 0x0802A0 +#define GPIO_DATA_DIRECTION 0x0802A4 + +#define I2C_SCL_MASK BIT(0) +#define I2C_SDA_MASK BIT(1) + +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) +{ + struct yhgch_ddc *ddc = data; + struct yhgch_drm_private *priv = ddc->priv; + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if (value) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } else { + u32 tmp_data = readl(priv->mmio + GPIO_DATA); + + tmp_data &= ~mask; + writel(tmp_data, priv->mmio + GPIO_DATA); + + tmp_dir |= mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } +} + +static int yhgch_get_i2c_signal(void *data, u32 mask) +{ + struct yhgch_ddc *ddc = data; + struct yhgch_drm_private *priv = ddc->priv; + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if ((tmp_dir & mask) != mask) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } + + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; +} + +static void yhgch_ddc_setsda(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); +} + +static void yhgch_ddc_setscl(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); +} + +static int yhgch_ddc_getsda(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); +} + +static int yhgch_ddc_getscl(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); +} + +static void yhgch_ddc_release(struct drm_device *dev, void *res) +{ + struct yhgch_ddc *ddc = res; + + i2c_del_adapter(&ddc->adapter); +} + +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv) +{ + int ret = 0; + struct yhgch_ddc *ddc; + struct drm_device *dev = &priv->dev; + + ddc = drmm_kzalloc(dev, sizeof(struct yhgch_ddc), GFP_KERNEL); + if (!ddc) + return ERR_PTR(-ENOMEM); + + ddc->adapter.owner = THIS_MODULE; + ddc->priv = priv; + snprintf(ddc->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); + ddc->adapter.dev.parent = priv->dev.dev; + i2c_set_adapdata(&ddc->adapter, ddc); + ddc->adapter.algo_data = &ddc->bit_data; + + ddc->bit_data.udelay = 20; + ddc->bit_data.timeout = usecs_to_jiffies(2000); + ddc->bit_data.data = ddc; + ddc->bit_data.setsda = yhgch_ddc_setsda; + ddc->bit_data.setscl = yhgch_ddc_setscl; + ddc->bit_data.getsda = yhgch_ddc_getsda; + ddc->bit_data.getscl = yhgch_ddc_getscl; + + ret = i2c_bit_add_bus(&ddc->adapter); + if (ret) + return ERR_PTR(ret); + + ret = drmm_add_action_or_reset(&priv->dev, yhgch_ddc_release, ddc); + if (ret) + return ERR_PTR(ret); + + return &ddc->adapter; +} diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h new file mode 100644 index 000000000000..cecb6173a445 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h @@ -0,0 +1,208 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_HW_H +#define YHGCH_DRM_HW_H + +/* register definition */ +#define YHGCH_MISC_CTRL 0x4 + +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 + +#define YHGCH_CURRENT_GATE 0x000040 +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 + +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 + +#define YHGCH_MODE0_GATE 0x000044 +#define YHGCH_MODE1_GATE 0x000048 +#define YHGCH_POWER_MODE_CTRL 0x00004C + +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 + +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 + +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 + +//#define YHGCH_CRT_PLL_CTRL 0x000060 + +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 + +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 + +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 + +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 + +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 + +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) +#define YHGCH_PLL_CTRL_N_MASK 0xF00 + +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) +#define YHGCH_PLL_CTRL_M_MASK 0xFF + +#define YHGCH_CRT_DISP_CTL 0x80200 + +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 + +#define YHGCH_CRT_DPMS_ON 0 +#define YHGCH_CRT_DPMS_OFF 3 + +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 + +#define YHGCH_CRTSELECT_CRT 1 + +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 + +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 + +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 + +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 + +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 + +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 + +#define YHGCH_CRT_FB_ADDRESS 0x080204 + +#define YHGCH_CRT_FB_WIDTH 0x080208 +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF + +#define YHGCH_CRT_HORZ_TOTAL 0x08020C +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 + +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF + +#define YHGCH_CRT_HORZ_SYNC 0x080210 +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 + +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF + +#define YHGCH_CRT_VERT_TOTAL 0x080214 +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 + +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF + +#define YHGCH_CRT_VERT_SYNC 0x080218 +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 + +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF + +/* Hardware Cursor */ +#define YHGCH_HWC_ADDRESS 0x080230 +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF + +#define YHGCH_HWC_LOCATION 0x080234 +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF + +#define YHGCH_HWC_COLOR_12 0x080238 +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF + +#define YHGCH_HWC_COLOR_3 0x08023C +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF + +/* Auto Centering */ +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF + +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF + +/* register to control panel output */ +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) + +#define YHGCH_RAW_INTERRUPT 0x80290 +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 + +#define YHGCH_RAW_INTERRUPT_EN 0x80298 +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 + +/* register and values for PLL control */ +#define CRT_PLL1_NS 0x802a8 +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) + +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 + +#define CRT_PLL2_NS 0x802ac +#define CRT_PLL2_NS_25MHZ 0x0 +#define CRT_PLL2_NS_40MHZ 0x0 +#define CRT_PLL2_NS_65MHZ 0x0 +#define CRT_PLL2_NS_83MHZ 0x0 +#define CRT_PLL2_NS_106MHZ 0x0 +#define CRT_PLL2_NS_108MHZ 0x0 +#define CRT_PLL2_NS_146MHZ 0x0 +#define CRT_PLL2_NS_148MHZ 0x0 +#define CRT_PLL2_NS_193MHZ 0x0 + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c new file mode 100644 index 000000000000..2e222af29f69 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/io.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_print.h> +#include <drm/drm_simple_kms_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +static int yhgch_connector_get_modes(struct drm_connector *connector) +{ + int count; + const struct drm_edid *drm_edid; + + drm_edid = drm_edid_read(connector); + if (drm_edid) { + drm_edid_connector_update(connector, drm_edid); + count = drm_edid_connector_add_modes(connector); + if (count) + goto out; + } + + count = drm_add_modes_noedid(connector, + connector->dev->mode_config.max_width, + connector->dev->mode_config.max_height); + drm_set_preferred_mode(connector, 1024, 768); + +out: + drm_edid_free(drm_edid); + return count; +} + +static int yhgch_connector_helper_detect_from_ddc(struct drm_connector *connector, + struct drm_modeset_acquire_ctx *ctx, + bool force) +{ + if (drm_connector_helper_detect_from_ddc(connector, ctx, force) + != connector_status_connected) { + drm_dbg_kms(connector->dev, "ddc detect failed, force connect\n"); + } + return connector_status_connected; +} + +static const struct drm_connector_helper_funcs + yhgch_connector_helper_funcs = { + .get_modes = yhgch_connector_get_modes, + .detect_ctx = yhgch_connector_helper_detect_from_ddc, +}; + +static const struct drm_connector_funcs yhgch_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static void yhgch_encoder_enable(struct drm_encoder *encoder) +{ + u32 reg; + struct drm_device *dev = encoder->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); +} + +static void yhgch_encoder_disable(struct drm_encoder *encoder) +{ + u32 reg = 0, regmask = 0; + struct drm_device *dev = encoder->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); + regmask |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); + regmask |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); + regmask |= YHGCH_DISPLAY_CONTROL_FPEN(1); + regmask |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); + reg &= ~regmask; + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); +} + +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { + .enable = yhgch_encoder_enable, + .disable = yhgch_encoder_disable, +}; + +int yhgch_vdac_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_encoder *encoder = &priv->encoder; + struct drm_crtc *crtc = &priv->crtc; + struct drm_connector *connector = &priv->connector; + struct i2c_adapter *ddc; + int ret; + + ddc = yhgch_ddc_create(priv); + if (IS_ERR(ddc)) { + ret = PTR_ERR(ddc); + drm_err(dev, "failed to create ddc: %d\n", ret); + return ret; + } + + encoder->possible_crtcs = drm_crtc_mask(crtc); + ret = drmm_encoder_init(dev, encoder, NULL, DRM_MODE_ENCODER_DAC, NULL); + if (ret) { + drm_err(dev, "failed to init encoder: %d\n", ret); + return ret; + } + + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); + + ret = drm_connector_init_with_ddc(dev, connector, + &yhgch_connector_funcs, + DRM_MODE_CONNECTOR_VGA, + ddc); + if (ret) { + drm_err(dev, "failed to init connector: %d\n", ret); + return ret; + } + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); + + drm_connector_attach_encoder(connector, encoder); + + return 0; +} -- 2.43.5 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v6 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-28 5:41 ` [PATCH v6 1/1] " Chu Guangqing @ 2025-09-28 21:43 ` Dmitry Baryshkov 2025-09-29 6:07 ` Chu Guangqing 0 siblings, 1 reply; 14+ messages in thread From: Dmitry Baryshkov @ 2025-09-28 21:43 UTC (permalink / raw) To: Chu Guangqing Cc: tzimmermann, maarten.lankhorst, mripard, airlied, simona, linux-kernel, dri-devel On Sun, Sep 28, 2025 at 01:41:23PM +0800, Chu Guangqing wrote: > add support for Yhgc BMC soc chipset Could you please provide some more details about the BMC? Quick googling finds only a very links. What is the name of the vendor? Is there a product page somewhere? > > Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> > --- > MAINTAINERS | 5 + > drivers/gpu/drm/Kconfig | 2 + > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/yhgch/Kconfig | 11 + > drivers/gpu/drm/yhgch/Makefile | 4 + > drivers/gpu/drm/yhgch/yhgch_drm_de.c | 407 +++++++++++++++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 310 +++++++++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 ++++ > drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ > drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 134 ++++++++ > 11 files changed, 1247 insertions(+) > create mode 100644 drivers/gpu/drm/yhgch/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 520fb4e379a3..18fd2e2fcb81 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -27781,6 +27781,11 @@ S: Maintained > F: Documentation/input/devices/yealink.rst > F: drivers/input/misc/yealink.* > > +YHGC DRM DRIVER > +M: chuguangqing <chuguangqing@inspur.com> Please use full name here. > +S: Maintained > +F: drivers/gpu/drm/yhgch How do you plan to maintain it? Do you plan to use drm-misc tree? (in such a case it should be mentioned here). Do you expect others to commit updates / fixes for you or do you have commit rights? > + > Z8530 DRIVER FOR AX.25 > M: Joerg Reuter <jreuter@yaina.de> > L: linux-hams@vger.kernel.org > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > index f7ea8e895c0c..8e0b1d12c81f 100644 > --- a/drivers/gpu/drm/Kconfig > +++ b/drivers/gpu/drm/Kconfig > @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" > > source "drivers/gpu/drm/imagination/Kconfig" > > +source "drivers/gpu/drm/yhgch/Kconfig" > + > config DRM_HYPERV > tristate "DRM Support for Hyper-V synthetic video device" > depends on DRM && PCI && HYPERV > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile > index 4dafbdc8f86a..f344e0173b29 100644 > --- a/drivers/gpu/drm/Makefile > +++ b/drivers/gpu/drm/Makefile > @@ -231,6 +231,7 @@ obj-y += solomon/ > obj-$(CONFIG_DRM_SPRD) += sprd/ > obj-$(CONFIG_DRM_LOONGSON) += loongson/ > obj-$(CONFIG_DRM_POWERVR) += imagination/ > +obj-$(CONFIG_DRM_YHGCH) += yhgch/ > > # Ensure drm headers are self-contained and pass kernel-doc > hdrtest-files := \ > diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig > new file mode 100644 > index 000000000000..695d29409444 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Kconfig > @@ -0,0 +1,11 @@ > +config DRM_YHGCH > + tristate "DRM Support for Yhgch BMC" > + depends on DRM && PCI && MMU > + select DRM_CLIENT_SELECTION > + select DRM_KMS_HELPER > + select DRM_GEM_SHMEM_HELPER > + help > + Choose this option if you have a Yhgch soc chipset. > + If M is selected the module will be called yhgch-drm. > + IF Y is selected the module will be built into the kernel. > + IF N is selected the module will be excluded from the kernel. > diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile > new file mode 100644 > index 000000000000..30de2fd27f18 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Makefile > @@ -0,0 +1,4 @@ > +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o > + > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o > + > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch_drm_de.c > new file mode 100644 > index 000000000000..de6dbd5acca7 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_de.c > @@ -0,0 +1,407 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <drm/drm_atomic.h> > +#include <drm/drm_gem_atomic_helper.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_gem_shmem_helper.h> > +#include <drm/drm_format_helper.h> > +#include <drm/drm_damage_helper.h> > +#include <drm/drm_fourcc.h> > + > +#include <drm/drm_vblank.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +struct yhgch_dislay_pll_config { > + u64 hdisplay; > + u64 vdisplay; > + u32 pll1_config_value; > + u32 pll2_config_value; > +}; > + > +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { > + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, > + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, > + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, > + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, > + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, This list is very limited by the modern standards. Is there a way to calculate these values for other resultions from the driver side? > +}; > + > +static const u32 channel_formats1[] = { > + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, > + DRM_FORMAT_XRGB8888, > +}; > + > +static struct drm_plane_funcs yhgch_plane_funcs = { > + .update_plane = drm_atomic_helper_update_plane, > + .disable_plane = drm_atomic_helper_disable_plane, > + .destroy = drm_plane_cleanup, > + .reset = drm_atomic_helper_plane_reset, > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, > + DRM_GEM_SHADOW_PLANE_FUNCS, This macro redefines several fields defined previously. You should have gotten a warning. > +}; > + > + > +static enum drm_mode_status > +yhgch_crtc_mode_valid(struct drm_crtc *crtc, > + const struct drm_display_mode *mode) > +{ > + size_t i = 0; > + int vrefresh = drm_mode_vrefresh(mode); > + > + if (vrefresh < 59 || vrefresh > 61) > + return MODE_NOCLOCK; > + > + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { > + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && > + yhgch_pll_table[i].vdisplay == mode->vdisplay) > + return MODE_OK; > + } > + > + return MODE_BAD; > +} > + > +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) > +{ > + u32 val; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + val = readl(priv->mmio + CRT_PLL1_NS); > + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + writel(pll, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val = pll & ~(CRT_PLL1_NS_POWERON(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val |= CRT_PLL1_NS_OUTER_BYPASS(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > +} > + > +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) > +{ > + size_t i; > + size_t count = ARRAY_SIZE(yhgch_pll_table); > + > + for (i = 0; i < count; i++) { > + if (yhgch_pll_table[i].hdisplay == x && > + yhgch_pll_table[i].vdisplay == y) { > + *pll1 = yhgch_pll_table[i].pll1_config_value; > + *pll2 = yhgch_pll_table[i].pll2_config_value; > + return; > + } > + } > + > + /* if found none, we use default value */ Can this happen granted your mode_valid check? > + *pll1 = CRT_PLL1_NS_25MHZ; > + *pll2 = CRT_PLL2_NS_25MHZ; > +} > + [...] > + > +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + yhgch_set_current_gate(priv, reg); > + > + /* We can add more initialization as needed. */ ??? > +} > + [..] > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c > new file mode 100644 > index 000000000000..2d7588ab8e2c > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c > @@ -0,0 +1,310 @@ > +// SPDX-License-Identifier: GPL-2.0 > +#include <linux/module.h> > +#include <linux/pci.h> > +#include <linux/bitfield.h> > + > +#include <linux/aperture.h> > +#include <drm/clients/drm_client_setup.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_drv.h> > +#include <drm/drm_fbdev_ttm.h> > + > +#include <drm/drm_gem_framebuffer_helper.h> > +#include <drm/drm_fbdev_shmem.h> > +#include <drm/drm_gem_shmem_helper.h> > +#include <drm/drm_managed.h> > +#include <drm/drm_module.h> > +#include <drm/drm_vblank.h> > + > +#include <drm/drm_probe_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +#define MEM_SIZE_RESERVE4KVM 0x200000 Unused > + -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: [PATCH v6 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-28 21:43 ` Dmitry Baryshkov @ 2025-09-29 6:07 ` Chu Guangqing 0 siblings, 0 replies; 14+ messages in thread From: Chu Guangqing @ 2025-09-29 6:07 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: linux-kernel, dri-devel, Chu Guangqing Hi Dmitry, > > On Sun, Sep 28, 2025 at 01:41:23PM +0800, Chu Guangqing wrote: > > add support for Yhgc BMC soc chipset > > Could you please provide some more details about the BMC? Quick googling > finds only a very links. What is the name of the vendor? Is there a product page > somewhere? > The ZX1000 (Z106) chip is a self-developed server management chip of the "Zhixin Series" by Yunhai Guochuang. It can monitor the operating status of servers in real time and perform various remote management operations on servers, including remote system installation, restart, power-on and power-off. It supports instruction sets of mainstream processor architectures such as X86, ARM, and LoongArch, with fully open firmware and software interfaces that are compatible with the third-party application ecosystem. The company's official website is www.yhgch.com. However, there is no English version of the webpage. The vendor is YHGCH. > > > > Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> > > --- > > MAINTAINERS | 5 + > > drivers/gpu/drm/Kconfig | 2 + > > drivers/gpu/drm/Makefile | 1 + > > drivers/gpu/drm/yhgch/Kconfig | 11 + > > drivers/gpu/drm/yhgch/Makefile | 4 + > > drivers/gpu/drm/yhgch/yhgch_drm_de.c | 407 > +++++++++++++++++++++++++ > > drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 310 +++++++++++++++++++ > > drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 ++++ > > drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ > > drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ > > drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 134 ++++++++ > > 11 files changed, 1247 insertions(+) > > create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode > 100644 > > drivers/gpu/drm/yhgch/Makefile create mode 100644 > > drivers/gpu/drm/yhgch/yhgch_drm_de.c > > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c > > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h > > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h > > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS index > > 520fb4e379a3..18fd2e2fcb81 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -27781,6 +27781,11 @@ S: Maintained > > F: Documentation/input/devices/yealink.rst > > F: drivers/input/misc/yealink.* > > > > +YHGC DRM DRIVER > > +M: chuguangqing <chuguangqing@inspur.com> > > Please use full name here. > ok, I will use Chu Guangqing > > +S: Maintained > > +F: drivers/gpu/drm/yhgch > > How do you plan to maintain it? Do you plan to use drm-misc tree? (in such a > case it should be mentioned here). Do you expect others to commit updates / > fixes for you or do you have commit rights? > We can use the drm-misc tree, but I don't have the commit rights. My colleagues and I will submit the code, and I will conduct the review. > > + > > Z8530 DRIVER FOR AX.25 > > M: Joerg Reuter <jreuter@yaina.de> > > L: linux-hams@vger.kernel.org > > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index > > f7ea8e895c0c..8e0b1d12c81f 100644 > > --- a/drivers/gpu/drm/Kconfig > > +++ b/drivers/gpu/drm/Kconfig > > @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" > > > > source "drivers/gpu/drm/imagination/Kconfig" > > > > +source "drivers/gpu/drm/yhgch/Kconfig" > > + > > config DRM_HYPERV > > tristate "DRM Support for Hyper-V synthetic video device" > > depends on DRM && PCI && HYPERV > > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index > > 4dafbdc8f86a..f344e0173b29 100644 > > --- a/drivers/gpu/drm/Makefile > > +++ b/drivers/gpu/drm/Makefile > > @@ -231,6 +231,7 @@ obj-y += solomon/ > > obj-$(CONFIG_DRM_SPRD) += sprd/ > > obj-$(CONFIG_DRM_LOONGSON) += loongson/ > > obj-$(CONFIG_DRM_POWERVR) += imagination/ > > +obj-$(CONFIG_DRM_YHGCH) += yhgch/ > > > > # Ensure drm headers are self-contained and pass kernel-doc > > hdrtest-files := \ diff --git a/drivers/gpu/drm/yhgch/Kconfig > > b/drivers/gpu/drm/yhgch/Kconfig new file mode 100644 index > > 000000000000..695d29409444 > > --- /dev/null > > +++ b/drivers/gpu/drm/yhgch/Kconfig > > @@ -0,0 +1,11 @@ > > +config DRM_YHGCH > > + tristate "DRM Support for Yhgch BMC" > > + depends on DRM && PCI && MMU > > + select DRM_CLIENT_SELECTION > > + select DRM_KMS_HELPER > > + select DRM_GEM_SHMEM_HELPER > > + help > > + Choose this option if you have a Yhgch soc chipset. > > + If M is selected the module will be called yhgch-drm. > > + IF Y is selected the module will be built into the kernel. > > + IF N is selected the module will be excluded from the kernel. > > diff --git a/drivers/gpu/drm/yhgch/Makefile > > b/drivers/gpu/drm/yhgch/Makefile new file mode 100644 index > > 000000000000..30de2fd27f18 > > --- /dev/null > > +++ b/drivers/gpu/drm/yhgch/Makefile > > @@ -0,0 +1,4 @@ > > +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o > > +yhgch_drm_i2c.o > > + > > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o > > + > > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_de.c > > b/drivers/gpu/drm/yhgch/yhgch_drm_de.c > > new file mode 100644 > > index 000000000000..de6dbd5acca7 > > --- /dev/null > > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_de.c > > @@ -0,0 +1,407 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > + > > +#include <linux/delay.h> > > +#include <drm/drm_atomic.h> > > +#include <drm/drm_gem_atomic_helper.h> #include > > +<drm/drm_atomic_helper.h> #include <drm/drm_gem_shmem_helper.h> > > +#include <drm/drm_format_helper.h> #include > <drm/drm_damage_helper.h> > > +#include <drm/drm_fourcc.h> > > + > > +#include <drm/drm_vblank.h> > > + > > +#include "yhgch_drm_drv.h" > > +#include "yhgch_drm_regs.h" > > + > > +struct yhgch_dislay_pll_config { > > + u64 hdisplay; > > + u64 vdisplay; > > + u32 pll1_config_value; > > + u32 pll2_config_value; > > +}; > > + > > +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { > > + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, > > + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, > > + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, > > + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, > > + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, > > This list is very limited by the modern standards. Is there a way to calculate > these values for other resultions from the driver side? > This is a graphics card installed on a server, which only supports a limited number of resolutions. Therefore, this simple list is used. > > +}; > > + > > +static const u32 channel_formats1[] = { > > + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, > > + DRM_FORMAT_XRGB8888, > > +}; > > + > > +static struct drm_plane_funcs yhgch_plane_funcs = { > > + .update_plane = drm_atomic_helper_update_plane, > > + .disable_plane = drm_atomic_helper_disable_plane, > > + .destroy = drm_plane_cleanup, > > + .reset = drm_atomic_helper_plane_reset, > > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, > > + DRM_GEM_SHADOW_PLANE_FUNCS, > > This macro redefines several fields defined previously. You should have gotten a > warning. > Delete the three preceding function definitions > > +}; > > + > > + > > +static enum drm_mode_status > > +yhgch_crtc_mode_valid(struct drm_crtc *crtc, > > + const struct drm_display_mode *mode) { > > + size_t i = 0; > > + int vrefresh = drm_mode_vrefresh(mode); > > + > > + if (vrefresh < 59 || vrefresh > 61) > > + return MODE_NOCLOCK; > > + > > + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { > > + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && > > + yhgch_pll_table[i].vdisplay == mode->vdisplay) > > + return MODE_OK; > > + } > > + > > + return MODE_BAD; > > +} > > + > > +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) { > > + u32 val; > > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > > + > > + val = readl(priv->mmio + CRT_PLL1_NS); > > + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); > > + writel(val, priv->mmio + CRT_PLL1_NS); > > + > > + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); > > + writel(val, priv->mmio + CRT_PLL1_NS); > > + > > + writel(pll, priv->mmio + CRT_PLL1_NS); > > + > > + usleep_range(1000, 2000); > > + > > + val = pll & ~(CRT_PLL1_NS_POWERON(1)); > > + writel(val, priv->mmio + CRT_PLL1_NS); > > + > > + usleep_range(1000, 2000); > > + > > + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); > > + writel(val, priv->mmio + CRT_PLL1_NS); > > + > > + usleep_range(1000, 2000); > > + > > + val |= CRT_PLL1_NS_OUTER_BYPASS(1); > > + writel(val, priv->mmio + CRT_PLL1_NS); } > > + > > +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) { > > + size_t i; > > + size_t count = ARRAY_SIZE(yhgch_pll_table); > > + > > + for (i = 0; i < count; i++) { > > + if (yhgch_pll_table[i].hdisplay == x && > > + yhgch_pll_table[i].vdisplay == y) { > > + *pll1 = yhgch_pll_table[i].pll1_config_value; > > + *pll2 = yhgch_pll_table[i].pll2_config_value; > > + return; > > + } > > + } > > + > > + /* if found none, we use default value */ > > Can this happen granted your mode_valid check? > After testing, the code will not run to this point, so delete these lines of code. > > + *pll1 = CRT_PLL1_NS_25MHZ; > > + *pll2 = CRT_PLL2_NS_25MHZ; > > +} > > + > > [...] > > > + > > +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, > > + struct drm_atomic_state *old_state) { > > + u32 reg; > > + struct drm_device *dev = crtc->dev; > > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > > + > > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > > + > > + /* Enable display power gate & LOCALMEM power gate */ > > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > > + yhgch_set_current_gate(priv, reg); > > + > > + /* We can add more initialization as needed. */ > > ??? > Delete the redundant comments > > +} > > + > > [..] > > > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.c > > b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c > > new file mode 100644 > > index 000000000000..2d7588ab8e2c > > --- /dev/null > > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c > > @@ -0,0 +1,310 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +#include <linux/module.h> > > +#include <linux/pci.h> > > +#include <linux/bitfield.h> > > + > > +#include <linux/aperture.h> > > +#include <drm/clients/drm_client_setup.h> > > + > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_drv.h> > > +#include <drm/drm_fbdev_ttm.h> > > + > > +#include <drm/drm_gem_framebuffer_helper.h> > > +#include <drm/drm_fbdev_shmem.h> > > +#include <drm/drm_gem_shmem_helper.h> #include > <drm/drm_managed.h> > > +#include <drm/drm_module.h> #include <drm/drm_vblank.h> > > + > > +#include <drm/drm_probe_helper.h> > > + > > +#include "yhgch_drm_drv.h" > > +#include "yhgch_drm_regs.h" > > + > > +#define MEM_SIZE_RESERVE4KVM 0x200000 > > Unused > Delete the macro definitions that are no longer used > > + > > -- > With best wishes > Dmitry Best Regards, Chu Guangqing ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v7 0/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-28 5:41 [PATCH v6 0/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset Chu Guangqing 2025-09-28 5:41 ` [PATCH v6 1/1] " Chu Guangqing @ 2025-09-29 6:31 ` Chu Guangqing 2025-09-29 6:31 ` [PATCH v7 1/1] " Chu Guangqing 2025-09-29 10:48 ` [PATCH v8 0/1] [DRIVER] gpu: drm: add support for YHGCH " Chu Guangqing 1 sibling, 2 replies; 14+ messages in thread From: Chu Guangqing @ 2025-09-29 6:31 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: linux-kernel, dri-devel, Chu Guangqing v7: - Delete the three preceding function definitions - delete Delete the redundant code and comments v6: - simplify to return drm_atomic_helper_check_plane_state() - remove empty line - remove call drm_probe_ddc and smidebug - replace drm_err with drm_dbg_kms - add callback .disable (https://lore.kernel.org/all/20250928054123.32895-1-chuguangqing@inspur.com/) v5: - remove extra level of subdiretories, change to driver/gpu/drm/yhgch - remove else from > + else if (!new_plane_state->visible) - remove extra check in function yhgch_plane_atomic_check - remove the extra parentheses - change the author like other modules - use drm_edit_read function instead drm_get_edit - remove debug info drm_warn call - rename function name smi_connector_helper_detect_from_ddc to yhgch_connector_helper_detect_from_ddc, remove extra return statement. (https://lore.kernel.org/all/20250925091715.12739-1-chuguangqing@inspur.com/) v4: - remove VRAM helpers from Kconfig - use the coding style in ast/mgag200 for the DDC - use plane_state->dst instead of crtc_h/w/x/y. - delete duplicate framebuffer's atomic_check. - use FIELD_PREP() directly. - use dev->mode_config. - delete unnecessary drm_atomic_helper_shutdown call - add AUTHOR - using .enable instead (https://lore.kernel.org/all/20250924064954.3921-1-chuguangqing@inspur.com/) v3: - The order of the code blocks has been adjusted, and the "warn-on" branch has been removed. - removed the related formats for the alpha channel. - removed the atomic_flush function. - have removed the empty line. - have removed the error message here. - replaced it with the drmm_encoder_init function. (https://lore.kernel.org/all/20250910022311.2655-1-chuguangqing@inspur.com/) v2: - Delete unnecessary comments - Delete unnecessary branch - Use drm_atomic_helper_check_plane_state - remove the alpha formats form this list. - use w,h rather than x, y - delete type casting - use a simple call to drm_atomic_helper_shutdown() - delete yhgch_load function - delete vblanking code - delete unneeded i2c type (https://lore.kernel.org/all/20250903054533.68540-1-chuguangqing@inspur.com/) v1: (https://lore.kernel.org/all/20250808053508.52202-1-chuguangqing@inspur.com/) Chu Guangqing (1): [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 11 + drivers/gpu/drm/yhgch/Makefile | 4 + drivers/gpu/drm/yhgch/yhgch_drm_de.c | 398 +++++++++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 308 +++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 ++++ drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 134 +++++++++ 11 files changed, 1236 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c -- 2.43.5 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v7 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-29 6:31 ` [PATCH v7 0/1] " Chu Guangqing @ 2025-09-29 6:31 ` Chu Guangqing 2025-09-29 9:07 ` Dmitry Baryshkov 2025-09-29 10:48 ` [PATCH v8 0/1] [DRIVER] gpu: drm: add support for YHGCH " Chu Guangqing 1 sibling, 1 reply; 14+ messages in thread From: Chu Guangqing @ 2025-09-29 6:31 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: linux-kernel, dri-devel, Chu Guangqing add support for Yhgc BMC soc chipset Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> --- MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 11 + drivers/gpu/drm/yhgch/Makefile | 4 + drivers/gpu/drm/yhgch/yhgch_drm_de.c | 398 +++++++++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 308 +++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 ++++ drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 134 +++++++++ 11 files changed, 1236 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c diff --git a/MAINTAINERS b/MAINTAINERS index 520fb4e379a3..24e122d3f3fc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -27781,6 +27781,11 @@ S: Maintained F: Documentation/input/devices/yealink.rst F: drivers/input/misc/yealink.* +YHGC DRM DRIVER +M: Chu Guangqing <chuguangqing@inspur.com> +S: Maintained +F: drivers/gpu/drm/yhgch + Z8530 DRIVER FOR AX.25 M: Joerg Reuter <jreuter@yaina.de> L: linux-hams@vger.kernel.org diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index f7ea8e895c0c..8e0b1d12c81f 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" source "drivers/gpu/drm/imagination/Kconfig" +source "drivers/gpu/drm/yhgch/Kconfig" + config DRM_HYPERV tristate "DRM Support for Hyper-V synthetic video device" depends on DRM && PCI && HYPERV diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 4dafbdc8f86a..f344e0173b29 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -231,6 +231,7 @@ obj-y += solomon/ obj-$(CONFIG_DRM_SPRD) += sprd/ obj-$(CONFIG_DRM_LOONGSON) += loongson/ obj-$(CONFIG_DRM_POWERVR) += imagination/ +obj-$(CONFIG_DRM_YHGCH) += yhgch/ # Ensure drm headers are self-contained and pass kernel-doc hdrtest-files := \ diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig new file mode 100644 index 000000000000..1e67c4b5e809 --- /dev/null +++ b/drivers/gpu/drm/yhgch/Kconfig @@ -0,0 +1,11 @@ +config DRM_YHGCH + tristate "DRM Support for Yhgch BMC" + depends on DRM && PCI && MMU + select DRM_CLIENT_SELECTION + select DRM_KMS_HELPER + select DRM_GEM_SHMEM_HELPER + help + Choose this option if you have a Yhgch ZX1000 chipset chipset. + If M is selected the module will be called yhgch-drm. + IF Y is selected the module will be built into the kernel. + IF N is selected the module will be excluded from the kernel. diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile new file mode 100644 index 000000000000..30de2fd27f18 --- /dev/null +++ b/drivers/gpu/drm/yhgch/Makefile @@ -0,0 +1,4 @@ +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o + +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o + diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch_drm_de.c new file mode 100644 index 000000000000..1a72b5517618 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_de.c @@ -0,0 +1,398 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <drm/drm_atomic.h> +#include <drm/drm_gem_atomic_helper.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_gem_shmem_helper.h> +#include <drm/drm_format_helper.h> +#include <drm/drm_damage_helper.h> +#include <drm/drm_fourcc.h> + +#include <drm/drm_vblank.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +struct yhgch_dislay_pll_config { + u64 hdisplay; + u64 vdisplay; + u32 pll1_config_value; + u32 pll2_config_value; +}; + +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, +}; + +static int yhgch_plane_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, + plane); + struct drm_framebuffer *fb = new_plane_state->fb; + struct drm_crtc_state *new_crtc_state = NULL; + + if (!fb) + return 0; + + if (new_plane_state->crtc) + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); + + return drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, + DRM_PLANE_NO_SCALING, + DRM_PLANE_NO_SCALING, + false, true); +} + +static void yhgch_handle_damage(void __iomem *addr_base, struct iosys_map *src, + struct drm_framebuffer *fb, + struct drm_rect *clip) +{ + struct iosys_map dst; + + iosys_map_set_vaddr_iomem(&dst, addr_base); + iosys_map_incr(&dst, drm_fb_clip_offset(fb->pitches[0], fb->format, clip)); + drm_fb_memcpy(&dst, fb->pitches, src, fb, clip); +} + +static void yhgch_plane_atomic_update(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); + struct drm_framebuffer *fb = plane_state->fb; + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); + struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); + struct drm_atomic_helper_damage_iter iter; + struct drm_rect damage; + u32 reg; + s64 gpu_addr = 0; + u32 line_l; + + if (!plane_state->crtc || !plane_state->fb) + return; + + if (!plane_state->visible) + return; + + drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); + drm_atomic_for_each_plane_damage(&iter, &damage) { + yhgch_handle_damage(priv->vram_base, shadow_plane_state->data, fb, &damage); + } + + fb->pitches[0] = (fb->pitches[0] + 15) & ~15; + + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); + + reg = fb->width * fb->format->cpp[0]; + + line_l = fb->pitches[0]; + writel(FIELD_PREP(YHGCH_CRT_FB_WIDTH_WIDTH_MASK, reg) | + FIELD_PREP(YHGCH_CRT_FB_WIDTH_OFFS_MASK, line_l), + priv->mmio + YHGCH_CRT_FB_WIDTH); + + /* SET PIXEL FORMAT */ + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, + fb->format->cpp[0] * 8 / 16); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static const u32 channel_formats1[] = { + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, + DRM_FORMAT_XRGB8888, +}; + +static struct drm_plane_funcs yhgch_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, + DRM_GEM_SHADOW_PLANE_FUNCS, +}; + +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { + DRM_GEM_SHADOW_PLANE_HELPER_FUNCS, + .atomic_check = yhgch_plane_atomic_check, + .atomic_update = yhgch_plane_atomic_update, +}; + +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) +{ + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + u32 reg; + + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_DPMS_MASK, dpms); + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; + if (dpms == YHGCH_CRT_DPMS_ON) + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + reg |= YHGCH_CURR_GATE_DISPLAY(1); + yhgch_set_current_gate(priv, reg); + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); +} + +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(0); + reg |= YHGCH_CURR_GATE_DISPLAY(0); + yhgch_set_current_gate(priv, reg); +} + +static enum drm_mode_status +yhgch_crtc_mode_valid(struct drm_crtc *crtc, + const struct drm_display_mode *mode) +{ + size_t i = 0; + int vrefresh = drm_mode_vrefresh(mode); + + if (vrefresh < 59 || vrefresh > 61) + return MODE_NOCLOCK; + + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && + yhgch_pll_table[i].vdisplay == mode->vdisplay) + return MODE_OK; + } + + return MODE_BAD; +} + +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) +{ + u32 val; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + val = readl(priv->mmio + CRT_PLL1_NS); + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); + writel(val, priv->mmio + CRT_PLL1_NS); + + writel(pll, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val = pll & ~(CRT_PLL1_NS_POWERON(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val |= CRT_PLL1_NS_OUTER_BYPASS(1); + writel(val, priv->mmio + CRT_PLL1_NS); +} + +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) +{ + size_t i; + size_t count = ARRAY_SIZE(yhgch_pll_table); + + for (i = 0; i < count; i++) { + if (yhgch_pll_table[i].hdisplay == x && + yhgch_pll_table[i].vdisplay == y) { + *pll1 = yhgch_pll_table[i].pll1_config_value; + *pll2 = yhgch_pll_table[i].pll2_config_value; + return; + } + } +} + +/* + * This function takes care the extra registers and bit fields required to + * setup a mode in board. + * Explanation about Display Control register: + * FPGA only supports 7 predefined pixel clocks, and clock select is + * in bit 4:0 of new register 0x802a8. + */ +static u32 display_ctrl_adjust(struct drm_device *dev, + struct drm_display_mode *mode, + u32 ctrl) +{ + u64 w, h; + u32 pll1; /* bit[31:0] of PLL */ + u32 pll2; /* bit[63:32] of PLL */ + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + w = mode->hdisplay; + h = mode->vdisplay; + + get_pll_config(w, h, &pll1, &pll2); + writel(pll2, priv->mmio + CRT_PLL2_NS); + set_vclock_yhgch(dev, pll1); + + /* + * yhgch has to set up the top-left and bottom-right + * registers as well. + * Note that normal chip only use those two register for + * auto-centering mode. + */ + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK, 0) | + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK, 0), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); + + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK, h - 1) | + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK, w - 1), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); + + /* + * Assume common fields in ctrl have been properly set before + * calling this function. + * This function only sets the extra fields in ctrl. + */ + + /* Set bit 25 of display controller: Select CRT or VGA clock */ + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; + + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); + + /* clock_phase_polarity is 0 */ + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); + ctrl |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, 2); + + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); + + return ctrl; +} + +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) +{ + u32 val; + struct drm_display_mode *mode = &crtc->state->mode; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + u32 width = mode->hsync_end - mode->hsync_start; + u32 height = mode->vsync_end - mode->vsync_start; + + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); + writel(FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK, mode->htotal - 1) | + FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK, mode->hdisplay - 1), + priv->mmio + YHGCH_CRT_HORZ_TOTAL); + + writel(FIELD_PREP(YHGCH_CRT_HORZ_SYNC_WIDTH_MASK, width) | + FIELD_PREP(YHGCH_CRT_HORZ_SYNC_START_MASK, mode->hsync_start - 1), + priv->mmio + YHGCH_CRT_HORZ_SYNC); + + writel(FIELD_PREP(YHGCH_CRT_VERT_TOTAL_TOTAL_MASK, mode->vtotal - 1) | + FIELD_PREP(YHGCH_CRT_VERT_TOTAL_DISP_END_MASK, mode->vdisplay - 1), + priv->mmio + YHGCH_CRT_VERT_TOTAL); + + writel(FIELD_PREP(YHGCH_CRT_VERT_SYNC_HEIGHT_MASK, height) | + FIELD_PREP(YHGCH_CRT_VERT_SYNC_START_MASK, mode->vsync_start - 1), + priv->mmio + YHGCH_CRT_VERT_SYNC); + + val = FIELD_PREP(YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK, 0); + val |= FIELD_PREP(YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK, 0); + val |= YHGCH_CRT_DISP_CTL_TIMING(1); + val |= YHGCH_CRT_DISP_CTL_PLANE(1); + + display_ctrl_adjust(dev, mode, val); +} + +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + yhgch_set_current_gate(priv, reg); +} + +static const struct drm_crtc_funcs yhgch_crtc_funcs = { + .page_flip = drm_atomic_helper_page_flip, + .set_config = drm_atomic_helper_set_config, + .destroy = drm_crtc_cleanup, + .reset = drm_atomic_helper_crtc_reset, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, +}; + +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { + .mode_set_nofb = yhgch_crtc_mode_set_nofb, + .atomic_begin = yhgch_crtc_atomic_begin, + .atomic_enable = yhgch_crtc_atomic_enable, + .atomic_disable = yhgch_crtc_atomic_disable, + .mode_valid = yhgch_crtc_mode_valid, +}; + +int yhgch_de_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_crtc *crtc = &priv->crtc; + struct drm_plane *plane = &priv->primary_plane; + int ret; + + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, + channel_formats1, + ARRAY_SIZE(channel_formats1), + NULL, + DRM_PLANE_TYPE_PRIMARY, + NULL); + if (ret) { + drm_err(dev, "failed to init plane: %d\n", ret); + return ret; + } + + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); + drm_plane_enable_fb_damage_clips(plane); + + ret = drm_crtc_init_with_planes(dev, crtc, plane, + NULL, &yhgch_crtc_funcs, NULL); + if (ret) { + drm_err(dev, "failed to init crtc: %d\n", ret); + return ret; + } + + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); + + return 0; +} diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c new file mode 100644 index 000000000000..911ac3f8d335 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/bitfield.h> + +#include <linux/aperture.h> +#include <drm/clients/drm_client_setup.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_fbdev_ttm.h> + +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_fbdev_shmem.h> +#include <drm/drm_gem_shmem_helper.h> +#include <drm/drm_managed.h> +#include <drm/drm_module.h> +#include <drm/drm_vblank.h> + +#include <drm/drm_probe_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +DEFINE_DRM_GEM_FOPS(yhgch_fops); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + args->width = ALIGN(args->width, 8); + return drm_gem_shmem_dumb_create(file, dev, args); +} + +static struct drm_driver yhgch_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .fops = &yhgch_fops, + .name = "yhgch", + .desc = "yhgch drm driver", + .major = 3, + .minor = 1, + .dumb_create = yhgch_dumb_create, + DRM_FBDEV_SHMEM_DRIVER_OPS, +}; + +static int __maybe_unused yhgch_pm_suspend(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_suspend(drm_dev); +} + +static int __maybe_unused yhgch_pm_resume(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_resume(drm_dev); +} + +static const struct dev_pm_ops yhgch_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, + yhgch_pm_resume) +}; + +static const struct drm_mode_config_funcs yhgch_mode_funcs = { + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, + .fb_create = drm_gem_fb_create_with_dirty, +}; + +static int yhgch_kms_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + int ret; + + ret = drmm_mode_config_init(dev); + if (ret) + return ret; + + dev->mode_config.min_width = 0; + dev->mode_config.min_height = 0; + dev->mode_config.max_width = 1920; + dev->mode_config.max_height = 1200; + dev->mode_config.preferred_depth = 24; + dev->mode_config.prefer_shadow = 1; + dev->mode_config.funcs = &yhgch_mode_funcs; + + ret = yhgch_de_init(priv); + if (ret) { + drm_err(dev, "failed to init de: %d\n", ret); + return ret; + } + + ret = yhgch_vdac_init(priv); + if (ret) { + drm_err(dev, "failed to init vdac: %d\n", ret); + return ret; + } + drm_kms_helper_poll_init(dev); + + return 0; +} + +/* + * It can operate in one of three modes: 0, 1 or Sleep. + */ +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) +{ + unsigned int control_value = 0; + void __iomem *mmio = priv->mmio; + u32 input = 1; + + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) + return; + + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) + input = 0; + + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_MODE_MASK, power_mode); + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_OSC_INPUT_MASK, input); + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); +} + +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) +{ + u32 gate_reg; + u32 mode; + void __iomem *mmio = priv->mmio; + + /* Get current power mode. */ + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; + + switch (mode) { + case YHGCH_PW_MODE_CTL_MODE_MODE0: + gate_reg = YHGCH_MODE0_GATE; + break; + + case YHGCH_PW_MODE_CTL_MODE_MODE1: + gate_reg = YHGCH_MODE1_GATE; + break; + + default: + gate_reg = YHGCH_MODE0_GATE; + break; + } + writel(gate, mmio + gate_reg); +} + +static void yhgch_hw_config(struct yhgch_drm_private *priv) +{ + u32 reg; + + /* On hardware reset, power mode 0 is default. */ + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + + yhgch_set_current_gate(priv, reg); + + /* + * Reset the memory controller. If the memory controller + * is not reset in chip,the system might hang when sw accesses + * the memory.The memory should be resetted after + * changing the MXCLK. + */ + reg = readl(priv->mmio + YHGCH_MISC_CTRL); + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); + writel(reg, priv->mmio + YHGCH_MISC_CTRL); + + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); + + writel(reg, priv->mmio + YHGCH_MISC_CTRL); +} + +static int yhgch_hw_map(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + resource_size_t ioaddr, iosize; + + ioaddr = pci_resource_start(pdev, 1); + iosize = pci_resource_len(pdev, 1); + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); + if (!priv->mmio) { + drm_err(dev, "Cannot map mmio region\n"); + return -ENOMEM; + } + + ioaddr = pci_resource_start(pdev, 0); + iosize = pci_resource_len(pdev, 0); + priv->vram_base = devm_ioremap_wc(dev->dev, ioaddr, iosize); + if (!priv->vram_base) { + drm_err(dev, "Cannot map vram region\n"); + return -ENOMEM; + } + return 0; +} + +static int yhgch_hw_init(struct yhgch_drm_private *priv) +{ + int ret; + + ret = yhgch_hw_map(priv); + if (ret) + return ret; + yhgch_hw_config(priv); + return 0; +} + +static int yhgch_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct yhgch_drm_private *priv; + struct drm_device *dev; + int ret; + + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); + + if (ret) + return ret; + + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, + struct yhgch_drm_private, dev); + + if (IS_ERR(priv)) + return PTR_ERR(priv); + + dev = &priv->dev; + pci_set_drvdata(pdev, dev); + + ret = pcim_enable_device(pdev); + if (ret) { + drm_err(dev, "failed to enable pci device: %d\n", ret); + goto err_return; + } + + ret = yhgch_hw_init(priv); + if (ret) + goto err_return; + + ret = yhgch_kms_init(priv); + if (ret) + goto err_return; + + ret = pci_enable_msi(pdev); + if (ret) + drm_warn(dev, "enabling MSI failed: %d\n", ret); + /* reset all the states of crtc/plane/encoder/connector */ + drm_mode_config_reset(dev); + + ret = drm_dev_register(dev, 0); + if (ret) { + drm_err(dev, "failed to register drv for userspace access: %d\n", + ret); + goto err_return; + } + drm_client_setup(dev, NULL); + + return 0; + +err_return: + return ret; +} + +static void yhgch_pci_remove(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + + drm_dev_unregister(dev); + drm_dev_put(dev); +} + +static void yhgch_pci_shutdown(struct pci_dev *pdev) +{ + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); +} + +static struct pci_device_id yhgch_pci_table[] = { + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, } +}; + +static struct pci_driver yhgch_pci_driver = { + .name = "yhgch-drm", + .id_table = yhgch_pci_table, + .probe = yhgch_pci_probe, + .remove = yhgch_pci_remove, + .shutdown = yhgch_pci_shutdown, + .driver.pm = &yhgch_pm_ops, +}; + +drm_module_pci_driver(yhgch_pci_driver); + +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); +MODULE_AUTHOR("Chu Guangqing <chuguangqing@inspur.com>"); +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("3.1"); diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h new file mode 100644 index 000000000000..1b8b1e5b0a43 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_DRV_H +#define YHGCH_DRM_DRV_H + +#include <linux/gpio/consumer.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> +#include <linux/version.h> +#include <linux/bitfield.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_encoder.h> + +struct yhgch_ddc { + struct yhgch_drm_private *priv; + struct i2c_adapter adapter; + struct i2c_algo_bit_data bit_data; +}; + +struct yhgch_drm_private { + /* hw */ + void __iomem *mmio; + void __iomem *vram_base; + + /* drm */ + struct drm_device dev; + struct drm_plane primary_plane; + struct drm_crtc crtc; + struct drm_encoder encoder; + struct drm_connector connector; +}; + +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) +{ + return container_of(dev, struct yhgch_drm_private, dev); +} + +void yhgch_set_power_mode(struct yhgch_drm_private *priv, + u32 power_mode); +void yhgch_set_current_gate(struct yhgch_drm_private *priv, + u32 gate); + +int yhgch_de_init(struct yhgch_drm_private *priv); +int yhgch_vdac_init(struct yhgch_drm_private *priv); +int yhgch_mm_init(struct yhgch_drm_private *yhgch); +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args); + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c new file mode 100644 index 000000000000..7bbe9a0540d4 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_probe_helper.h> + +#include <drm/drm_managed.h> + +#include "yhgch_drm_drv.h" + +#define GPIO_DATA 0x0802A0 +#define GPIO_DATA_DIRECTION 0x0802A4 + +#define I2C_SCL_MASK BIT(0) +#define I2C_SDA_MASK BIT(1) + +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) +{ + struct yhgch_ddc *ddc = data; + struct yhgch_drm_private *priv = ddc->priv; + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if (value) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } else { + u32 tmp_data = readl(priv->mmio + GPIO_DATA); + + tmp_data &= ~mask; + writel(tmp_data, priv->mmio + GPIO_DATA); + + tmp_dir |= mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } +} + +static int yhgch_get_i2c_signal(void *data, u32 mask) +{ + struct yhgch_ddc *ddc = data; + struct yhgch_drm_private *priv = ddc->priv; + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if ((tmp_dir & mask) != mask) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } + + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; +} + +static void yhgch_ddc_setsda(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); +} + +static void yhgch_ddc_setscl(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); +} + +static int yhgch_ddc_getsda(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); +} + +static int yhgch_ddc_getscl(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); +} + +static void yhgch_ddc_release(struct drm_device *dev, void *res) +{ + struct yhgch_ddc *ddc = res; + + i2c_del_adapter(&ddc->adapter); +} + +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv) +{ + int ret = 0; + struct yhgch_ddc *ddc; + struct drm_device *dev = &priv->dev; + + ddc = drmm_kzalloc(dev, sizeof(struct yhgch_ddc), GFP_KERNEL); + if (!ddc) + return ERR_PTR(-ENOMEM); + + ddc->adapter.owner = THIS_MODULE; + ddc->priv = priv; + snprintf(ddc->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); + ddc->adapter.dev.parent = priv->dev.dev; + i2c_set_adapdata(&ddc->adapter, ddc); + ddc->adapter.algo_data = &ddc->bit_data; + + ddc->bit_data.udelay = 20; + ddc->bit_data.timeout = usecs_to_jiffies(2000); + ddc->bit_data.data = ddc; + ddc->bit_data.setsda = yhgch_ddc_setsda; + ddc->bit_data.setscl = yhgch_ddc_setscl; + ddc->bit_data.getsda = yhgch_ddc_getsda; + ddc->bit_data.getscl = yhgch_ddc_getscl; + + ret = i2c_bit_add_bus(&ddc->adapter); + if (ret) + return ERR_PTR(ret); + + ret = drmm_add_action_or_reset(&priv->dev, yhgch_ddc_release, ddc); + if (ret) + return ERR_PTR(ret); + + return &ddc->adapter; +} diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h new file mode 100644 index 000000000000..cecb6173a445 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h @@ -0,0 +1,208 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_HW_H +#define YHGCH_DRM_HW_H + +/* register definition */ +#define YHGCH_MISC_CTRL 0x4 + +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 + +#define YHGCH_CURRENT_GATE 0x000040 +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 + +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 + +#define YHGCH_MODE0_GATE 0x000044 +#define YHGCH_MODE1_GATE 0x000048 +#define YHGCH_POWER_MODE_CTRL 0x00004C + +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 + +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 + +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 + +//#define YHGCH_CRT_PLL_CTRL 0x000060 + +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 + +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 + +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 + +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 + +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 + +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) +#define YHGCH_PLL_CTRL_N_MASK 0xF00 + +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) +#define YHGCH_PLL_CTRL_M_MASK 0xFF + +#define YHGCH_CRT_DISP_CTL 0x80200 + +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 + +#define YHGCH_CRT_DPMS_ON 0 +#define YHGCH_CRT_DPMS_OFF 3 + +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 + +#define YHGCH_CRTSELECT_CRT 1 + +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 + +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 + +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 + +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 + +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 + +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 + +#define YHGCH_CRT_FB_ADDRESS 0x080204 + +#define YHGCH_CRT_FB_WIDTH 0x080208 +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF + +#define YHGCH_CRT_HORZ_TOTAL 0x08020C +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 + +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF + +#define YHGCH_CRT_HORZ_SYNC 0x080210 +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 + +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF + +#define YHGCH_CRT_VERT_TOTAL 0x080214 +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 + +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF + +#define YHGCH_CRT_VERT_SYNC 0x080218 +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 + +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF + +/* Hardware Cursor */ +#define YHGCH_HWC_ADDRESS 0x080230 +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF + +#define YHGCH_HWC_LOCATION 0x080234 +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF + +#define YHGCH_HWC_COLOR_12 0x080238 +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF + +#define YHGCH_HWC_COLOR_3 0x08023C +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF + +/* Auto Centering */ +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF + +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF + +/* register to control panel output */ +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) + +#define YHGCH_RAW_INTERRUPT 0x80290 +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 + +#define YHGCH_RAW_INTERRUPT_EN 0x80298 +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 + +/* register and values for PLL control */ +#define CRT_PLL1_NS 0x802a8 +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) + +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 + +#define CRT_PLL2_NS 0x802ac +#define CRT_PLL2_NS_25MHZ 0x0 +#define CRT_PLL2_NS_40MHZ 0x0 +#define CRT_PLL2_NS_65MHZ 0x0 +#define CRT_PLL2_NS_83MHZ 0x0 +#define CRT_PLL2_NS_106MHZ 0x0 +#define CRT_PLL2_NS_108MHZ 0x0 +#define CRT_PLL2_NS_146MHZ 0x0 +#define CRT_PLL2_NS_148MHZ 0x0 +#define CRT_PLL2_NS_193MHZ 0x0 + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c new file mode 100644 index 000000000000..2e222af29f69 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/io.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_print.h> +#include <drm/drm_simple_kms_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +static int yhgch_connector_get_modes(struct drm_connector *connector) +{ + int count; + const struct drm_edid *drm_edid; + + drm_edid = drm_edid_read(connector); + if (drm_edid) { + drm_edid_connector_update(connector, drm_edid); + count = drm_edid_connector_add_modes(connector); + if (count) + goto out; + } + + count = drm_add_modes_noedid(connector, + connector->dev->mode_config.max_width, + connector->dev->mode_config.max_height); + drm_set_preferred_mode(connector, 1024, 768); + +out: + drm_edid_free(drm_edid); + return count; +} + +static int yhgch_connector_helper_detect_from_ddc(struct drm_connector *connector, + struct drm_modeset_acquire_ctx *ctx, + bool force) +{ + if (drm_connector_helper_detect_from_ddc(connector, ctx, force) + != connector_status_connected) { + drm_dbg_kms(connector->dev, "ddc detect failed, force connect\n"); + } + return connector_status_connected; +} + +static const struct drm_connector_helper_funcs + yhgch_connector_helper_funcs = { + .get_modes = yhgch_connector_get_modes, + .detect_ctx = yhgch_connector_helper_detect_from_ddc, +}; + +static const struct drm_connector_funcs yhgch_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static void yhgch_encoder_enable(struct drm_encoder *encoder) +{ + u32 reg; + struct drm_device *dev = encoder->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); +} + +static void yhgch_encoder_disable(struct drm_encoder *encoder) +{ + u32 reg = 0, regmask = 0; + struct drm_device *dev = encoder->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); + regmask |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); + regmask |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); + regmask |= YHGCH_DISPLAY_CONTROL_FPEN(1); + regmask |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); + reg &= ~regmask; + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); +} + +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { + .enable = yhgch_encoder_enable, + .disable = yhgch_encoder_disable, +}; + +int yhgch_vdac_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_encoder *encoder = &priv->encoder; + struct drm_crtc *crtc = &priv->crtc; + struct drm_connector *connector = &priv->connector; + struct i2c_adapter *ddc; + int ret; + + ddc = yhgch_ddc_create(priv); + if (IS_ERR(ddc)) { + ret = PTR_ERR(ddc); + drm_err(dev, "failed to create ddc: %d\n", ret); + return ret; + } + + encoder->possible_crtcs = drm_crtc_mask(crtc); + ret = drmm_encoder_init(dev, encoder, NULL, DRM_MODE_ENCODER_DAC, NULL); + if (ret) { + drm_err(dev, "failed to init encoder: %d\n", ret); + return ret; + } + + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); + + ret = drm_connector_init_with_ddc(dev, connector, + &yhgch_connector_funcs, + DRM_MODE_CONNECTOR_VGA, + ddc); + if (ret) { + drm_err(dev, "failed to init connector: %d\n", ret); + return ret; + } + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); + + drm_connector_attach_encoder(connector, encoder); + + return 0; +} -- 2.43.5 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v7 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-29 6:31 ` [PATCH v7 1/1] " Chu Guangqing @ 2025-09-29 9:07 ` Dmitry Baryshkov 2025-09-29 11:00 ` Chu Guangqing 0 siblings, 1 reply; 14+ messages in thread From: Dmitry Baryshkov @ 2025-09-29 9:07 UTC (permalink / raw) To: Chu Guangqing Cc: tzimmermann, maarten.lankhorst, mripard, airlied, simona, linux-kernel, dri-devel On Mon, Sep 29, 2025 at 02:31:03PM +0800, Chu Guangqing wrote: > add support for Yhgc BMC soc chipset So... Again, what is Yhgc? Please expand your commit message, MAINTAINERS and Kconfig entries. (this is a usual thing: if you get a review question, it usually means that you need to provide more information _in_ the patch rather than just reporting on the mailing list). I'd suggest adding full company name and maybe a website as a comment inside the driver code. Otherwise it would be very hard to assess in few years whether it's something that is still in use, whether it needs improvements, etc. > > Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> > --- > MAINTAINERS | 5 + > drivers/gpu/drm/Kconfig | 2 + > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/yhgch/Kconfig | 11 + > drivers/gpu/drm/yhgch/Makefile | 4 + > drivers/gpu/drm/yhgch/yhgch_drm_de.c | 398 +++++++++++++++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 308 +++++++++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 ++++ > drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ > drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 134 +++++++++ > 11 files changed, 1236 insertions(+) > create mode 100644 drivers/gpu/drm/yhgch/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 520fb4e379a3..24e122d3f3fc 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -27781,6 +27781,11 @@ S: Maintained > F: Documentation/input/devices/yealink.rst > F: drivers/input/misc/yealink.* > > +YHGC DRM DRIVER > +M: Chu Guangqing <chuguangqing@inspur.com> > +S: Maintained > +F: drivers/gpu/drm/yhgch > + > Z8530 DRIVER FOR AX.25 > M: Joerg Reuter <jreuter@yaina.de> > L: linux-hams@vger.kernel.org > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > index f7ea8e895c0c..8e0b1d12c81f 100644 > --- a/drivers/gpu/drm/Kconfig > +++ b/drivers/gpu/drm/Kconfig > @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" > > source "drivers/gpu/drm/imagination/Kconfig" > > +source "drivers/gpu/drm/yhgch/Kconfig" > + > config DRM_HYPERV > tristate "DRM Support for Hyper-V synthetic video device" > depends on DRM && PCI && HYPERV > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile > index 4dafbdc8f86a..f344e0173b29 100644 > --- a/drivers/gpu/drm/Makefile > +++ b/drivers/gpu/drm/Makefile > @@ -231,6 +231,7 @@ obj-y += solomon/ > obj-$(CONFIG_DRM_SPRD) += sprd/ > obj-$(CONFIG_DRM_LOONGSON) += loongson/ > obj-$(CONFIG_DRM_POWERVR) += imagination/ > +obj-$(CONFIG_DRM_YHGCH) += yhgch/ > > # Ensure drm headers are self-contained and pass kernel-doc > hdrtest-files := \ > diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig > new file mode 100644 > index 000000000000..1e67c4b5e809 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Kconfig > @@ -0,0 +1,11 @@ > +config DRM_YHGCH > + tristate "DRM Support for Yhgch BMC" > + depends on DRM && PCI && MMU > + select DRM_CLIENT_SELECTION > + select DRM_KMS_HELPER > + select DRM_GEM_SHMEM_HELPER > + help > + Choose this option if you have a Yhgch ZX1000 chipset chipset. > + If M is selected the module will be called yhgch-drm. > + IF Y is selected the module will be built into the kernel. > + IF N is selected the module will be excluded from the kernel. > diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile > new file mode 100644 > index 000000000000..30de2fd27f18 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Makefile > @@ -0,0 +1,4 @@ > +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o > + > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o > + > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch_drm_de.c > new file mode 100644 > index 000000000000..1a72b5517618 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_de.c > @@ -0,0 +1,398 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <drm/drm_atomic.h> > +#include <drm/drm_gem_atomic_helper.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_gem_shmem_helper.h> > +#include <drm/drm_format_helper.h> > +#include <drm/drm_damage_helper.h> > +#include <drm/drm_fourcc.h> > + > +#include <drm/drm_vblank.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +struct yhgch_dislay_pll_config { > + u64 hdisplay; > + u64 vdisplay; > + u32 pll1_config_value; > + u32 pll2_config_value; > +}; > + > +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { > + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, > + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, > + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, > + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, > + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, > +}; > + > +static int yhgch_plane_atomic_check(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, > + plane); > + struct drm_framebuffer *fb = new_plane_state->fb; > + struct drm_crtc_state *new_crtc_state = NULL; > + > + if (!fb) > + return 0; > + > + if (new_plane_state->crtc) > + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); > + > + return drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, > + DRM_PLANE_NO_SCALING, > + DRM_PLANE_NO_SCALING, > + false, true); > +} > + > +static void yhgch_handle_damage(void __iomem *addr_base, struct iosys_map *src, > + struct drm_framebuffer *fb, > + struct drm_rect *clip) > +{ > + struct iosys_map dst; > + > + iosys_map_set_vaddr_iomem(&dst, addr_base); > + iosys_map_incr(&dst, drm_fb_clip_offset(fb->pitches[0], fb->format, clip)); > + drm_fb_memcpy(&dst, fb->pitches, src, fb, clip); > +} > + > +static void yhgch_plane_atomic_update(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); > + struct drm_framebuffer *fb = plane_state->fb; > + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); > + struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); > + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); > + struct drm_atomic_helper_damage_iter iter; > + struct drm_rect damage; > + u32 reg; > + s64 gpu_addr = 0; > + u32 line_l; > + > + if (!plane_state->crtc || !plane_state->fb) > + return; > + > + if (!plane_state->visible) > + return; > + > + drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); > + drm_atomic_for_each_plane_damage(&iter, &damage) { > + yhgch_handle_damage(priv->vram_base, shadow_plane_state->data, fb, &damage); > + } > + > + fb->pitches[0] = (fb->pitches[0] + 15) & ~15; > + > + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); > + > + reg = fb->width * fb->format->cpp[0]; > + > + line_l = fb->pitches[0]; > + writel(FIELD_PREP(YHGCH_CRT_FB_WIDTH_WIDTH_MASK, reg) | > + FIELD_PREP(YHGCH_CRT_FB_WIDTH_OFFS_MASK, line_l), > + priv->mmio + YHGCH_CRT_FB_WIDTH); > + > + /* SET PIXEL FORMAT */ > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; > + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, > + fb->format->cpp[0] * 8 / 16); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + > +static const u32 channel_formats1[] = { > + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, > + DRM_FORMAT_XRGB8888, > +}; > + > +static struct drm_plane_funcs yhgch_plane_funcs = { > + .update_plane = drm_atomic_helper_update_plane, > + .disable_plane = drm_atomic_helper_disable_plane, > + .destroy = drm_plane_cleanup, > + DRM_GEM_SHADOW_PLANE_FUNCS, > +}; > + > +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { > + DRM_GEM_SHADOW_PLANE_HELPER_FUNCS, > + .atomic_check = yhgch_plane_atomic_check, > + .atomic_update = yhgch_plane_atomic_update, > +}; > + > +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) > +{ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + u32 reg; > + > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; > + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_DPMS_MASK, dpms); > + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; > + if (dpms == YHGCH_CRT_DPMS_ON) > + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + > +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + yhgch_set_current_gate(priv, reg); > + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); > +} > + > +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg |= YHGCH_CURR_GATE_LOCALMEM(0); > + reg |= YHGCH_CURR_GATE_DISPLAY(0); > + yhgch_set_current_gate(priv, reg); > +} > + > +static enum drm_mode_status > +yhgch_crtc_mode_valid(struct drm_crtc *crtc, > + const struct drm_display_mode *mode) > +{ > + size_t i = 0; > + int vrefresh = drm_mode_vrefresh(mode); > + > + if (vrefresh < 59 || vrefresh > 61) > + return MODE_NOCLOCK; > + > + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { > + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && > + yhgch_pll_table[i].vdisplay == mode->vdisplay) > + return MODE_OK; > + } > + > + return MODE_BAD; > +} > + > +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) > +{ > + u32 val; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + val = readl(priv->mmio + CRT_PLL1_NS); > + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + writel(pll, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val = pll & ~(CRT_PLL1_NS_POWERON(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val |= CRT_PLL1_NS_OUTER_BYPASS(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > +} > + > +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) > +{ > + size_t i; > + size_t count = ARRAY_SIZE(yhgch_pll_table); > + > + for (i = 0; i < count; i++) { > + if (yhgch_pll_table[i].hdisplay == x && > + yhgch_pll_table[i].vdisplay == y) { > + *pll1 = yhgch_pll_table[i].pll1_config_value; > + *pll2 = yhgch_pll_table[i].pll2_config_value; > + return; > + } > + } > +} > + > +/* > + * This function takes care the extra registers and bit fields required to > + * setup a mode in board. > + * Explanation about Display Control register: > + * FPGA only supports 7 predefined pixel clocks, and clock select is > + * in bit 4:0 of new register 0x802a8. > + */ > +static u32 display_ctrl_adjust(struct drm_device *dev, > + struct drm_display_mode *mode, > + u32 ctrl) > +{ > + u64 w, h; > + u32 pll1; /* bit[31:0] of PLL */ > + u32 pll2; /* bit[63:32] of PLL */ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + w = mode->hdisplay; > + h = mode->vdisplay; > + > + get_pll_config(w, h, &pll1, &pll2); > + writel(pll2, priv->mmio + CRT_PLL2_NS); > + set_vclock_yhgch(dev, pll1); > + > + /* > + * yhgch has to set up the top-left and bottom-right > + * registers as well. > + * Note that normal chip only use those two register for > + * auto-centering mode. > + */ > + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK, 0) | > + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK, 0), > + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); > + > + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK, h - 1) | > + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK, w - 1), > + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); > + > + /* > + * Assume common fields in ctrl have been properly set before > + * calling this function. > + * This function only sets the extra fields in ctrl. > + */ > + > + /* Set bit 25 of display controller: Select CRT or VGA clock */ > + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; > + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; > + > + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); > + > + /* clock_phase_polarity is 0 */ > + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); > + ctrl |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, 2); > + > + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); > + > + return ctrl; > +} > + > +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) > +{ > + u32 val; > + struct drm_display_mode *mode = &crtc->state->mode; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + u32 width = mode->hsync_end - mode->hsync_start; > + u32 height = mode->vsync_end - mode->vsync_start; > + > + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); > + writel(FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK, mode->htotal - 1) | > + FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK, mode->hdisplay - 1), > + priv->mmio + YHGCH_CRT_HORZ_TOTAL); > + > + writel(FIELD_PREP(YHGCH_CRT_HORZ_SYNC_WIDTH_MASK, width) | > + FIELD_PREP(YHGCH_CRT_HORZ_SYNC_START_MASK, mode->hsync_start - 1), > + priv->mmio + YHGCH_CRT_HORZ_SYNC); > + > + writel(FIELD_PREP(YHGCH_CRT_VERT_TOTAL_TOTAL_MASK, mode->vtotal - 1) | > + FIELD_PREP(YHGCH_CRT_VERT_TOTAL_DISP_END_MASK, mode->vdisplay - 1), > + priv->mmio + YHGCH_CRT_VERT_TOTAL); > + > + writel(FIELD_PREP(YHGCH_CRT_VERT_SYNC_HEIGHT_MASK, height) | > + FIELD_PREP(YHGCH_CRT_VERT_SYNC_START_MASK, mode->vsync_start - 1), > + priv->mmio + YHGCH_CRT_VERT_SYNC); > + > + val = FIELD_PREP(YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK, 0); > + val |= FIELD_PREP(YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK, 0); > + val |= YHGCH_CRT_DISP_CTL_TIMING(1); > + val |= YHGCH_CRT_DISP_CTL_PLANE(1); > + > + display_ctrl_adjust(dev, mode, val); > +} > + > +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + yhgch_set_current_gate(priv, reg); > +} > + > +static const struct drm_crtc_funcs yhgch_crtc_funcs = { > + .page_flip = drm_atomic_helper_page_flip, > + .set_config = drm_atomic_helper_set_config, > + .destroy = drm_crtc_cleanup, > + .reset = drm_atomic_helper_crtc_reset, > + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, > +}; > + > +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { > + .mode_set_nofb = yhgch_crtc_mode_set_nofb, > + .atomic_begin = yhgch_crtc_atomic_begin, > + .atomic_enable = yhgch_crtc_atomic_enable, > + .atomic_disable = yhgch_crtc_atomic_disable, > + .mode_valid = yhgch_crtc_mode_valid, > +}; > + > +int yhgch_de_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_plane *plane = &priv->primary_plane; > + int ret; > + > + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, > + channel_formats1, > + ARRAY_SIZE(channel_formats1), > + NULL, > + DRM_PLANE_TYPE_PRIMARY, > + NULL); > + if (ret) { > + drm_err(dev, "failed to init plane: %d\n", ret); > + return ret; > + } > + > + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); > + drm_plane_enable_fb_damage_clips(plane); > + > + ret = drm_crtc_init_with_planes(dev, crtc, plane, > + NULL, &yhgch_crtc_funcs, NULL); > + if (ret) { > + drm_err(dev, "failed to init crtc: %d\n", ret); > + return ret; > + } > + > + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); > + > + return 0; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c > new file mode 100644 > index 000000000000..911ac3f8d335 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c > @@ -0,0 +1,308 @@ > +// SPDX-License-Identifier: GPL-2.0 > +#include <linux/module.h> > +#include <linux/pci.h> > +#include <linux/bitfield.h> > + > +#include <linux/aperture.h> > +#include <drm/clients/drm_client_setup.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_drv.h> > +#include <drm/drm_fbdev_ttm.h> > + > +#include <drm/drm_gem_framebuffer_helper.h> > +#include <drm/drm_fbdev_shmem.h> > +#include <drm/drm_gem_shmem_helper.h> > +#include <drm/drm_managed.h> > +#include <drm/drm_module.h> > +#include <drm/drm_vblank.h> > + > +#include <drm/drm_probe_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +DEFINE_DRM_GEM_FOPS(yhgch_fops); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args) > +{ > + args->width = ALIGN(args->width, 8); > + return drm_gem_shmem_dumb_create(file, dev, args); > +} > + > +static struct drm_driver yhgch_driver = { > + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, > + .fops = &yhgch_fops, > + .name = "yhgch", > + .desc = "yhgch drm driver", > + .major = 3, > + .minor = 1, > + .dumb_create = yhgch_dumb_create, > + DRM_FBDEV_SHMEM_DRIVER_OPS, > +}; > + > +static int __maybe_unused yhgch_pm_suspend(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_suspend(drm_dev); > +} > + > +static int __maybe_unused yhgch_pm_resume(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_resume(drm_dev); > +} > + > +static const struct dev_pm_ops yhgch_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, > + yhgch_pm_resume) > +}; > + > +static const struct drm_mode_config_funcs yhgch_mode_funcs = { > + .atomic_check = drm_atomic_helper_check, > + .atomic_commit = drm_atomic_helper_commit, > + .fb_create = drm_gem_fb_create_with_dirty, > +}; > + > +static int yhgch_kms_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + int ret; > + > + ret = drmm_mode_config_init(dev); > + if (ret) > + return ret; > + > + dev->mode_config.min_width = 0; > + dev->mode_config.min_height = 0; > + dev->mode_config.max_width = 1920; > + dev->mode_config.max_height = 1200; > + dev->mode_config.preferred_depth = 24; > + dev->mode_config.prefer_shadow = 1; > + dev->mode_config.funcs = &yhgch_mode_funcs; > + > + ret = yhgch_de_init(priv); > + if (ret) { > + drm_err(dev, "failed to init de: %d\n", ret); > + return ret; > + } > + > + ret = yhgch_vdac_init(priv); > + if (ret) { > + drm_err(dev, "failed to init vdac: %d\n", ret); > + return ret; > + } > + drm_kms_helper_poll_init(dev); > + > + return 0; > +} > + > +/* > + * It can operate in one of three modes: 0, 1 or Sleep. > + */ > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) > +{ > + unsigned int control_value = 0; > + void __iomem *mmio = priv->mmio; > + u32 input = 1; > + > + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) > + return; > + > + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) > + input = 0; > + > + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); > + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | > + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); > + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_MODE_MASK, power_mode); > + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_OSC_INPUT_MASK, input); > + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); > +} > + > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) > +{ > + u32 gate_reg; > + u32 mode; > + void __iomem *mmio = priv->mmio; > + > + /* Get current power mode. */ > + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & > + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; > + > + switch (mode) { > + case YHGCH_PW_MODE_CTL_MODE_MODE0: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + > + case YHGCH_PW_MODE_CTL_MODE_MODE1: > + gate_reg = YHGCH_MODE1_GATE; > + break; > + > + default: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + } > + writel(gate, mmio + gate_reg); > +} > + > +static void yhgch_hw_config(struct yhgch_drm_private *priv) > +{ > + u32 reg; > + > + /* On hardware reset, power mode 0 is default. */ > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + > + yhgch_set_current_gate(priv, reg); > + > + /* > + * Reset the memory controller. If the memory controller > + * is not reset in chip,the system might hang when sw accesses > + * the memory.The memory should be resetted after > + * changing the MXCLK. > + */ > + reg = readl(priv->mmio + YHGCH_MISC_CTRL); > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > + > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); > + > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > +} > + > +static int yhgch_hw_map(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct pci_dev *pdev = to_pci_dev(dev->dev); > + resource_size_t ioaddr, iosize; > + > + ioaddr = pci_resource_start(pdev, 1); > + iosize = pci_resource_len(pdev, 1); > + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); > + if (!priv->mmio) { > + drm_err(dev, "Cannot map mmio region\n"); > + return -ENOMEM; > + } > + > + ioaddr = pci_resource_start(pdev, 0); > + iosize = pci_resource_len(pdev, 0); > + priv->vram_base = devm_ioremap_wc(dev->dev, ioaddr, iosize); > + if (!priv->vram_base) { > + drm_err(dev, "Cannot map vram region\n"); > + return -ENOMEM; > + } > + return 0; > +} > + > +static int yhgch_hw_init(struct yhgch_drm_private *priv) > +{ > + int ret; > + > + ret = yhgch_hw_map(priv); > + if (ret) > + return ret; > + yhgch_hw_config(priv); > + return 0; > +} > + > +static int yhgch_pci_probe(struct pci_dev *pdev, > + const struct pci_device_id *ent) > +{ > + struct yhgch_drm_private *priv; > + struct drm_device *dev; > + int ret; > + > + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); > + > + if (ret) > + return ret; > + > + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, > + struct yhgch_drm_private, dev); > + > + if (IS_ERR(priv)) > + return PTR_ERR(priv); > + > + dev = &priv->dev; > + pci_set_drvdata(pdev, dev); > + > + ret = pcim_enable_device(pdev); > + if (ret) { > + drm_err(dev, "failed to enable pci device: %d\n", ret); > + goto err_return; > + } > + > + ret = yhgch_hw_init(priv); > + if (ret) > + goto err_return; > + > + ret = yhgch_kms_init(priv); > + if (ret) > + goto err_return; > + > + ret = pci_enable_msi(pdev); > + if (ret) > + drm_warn(dev, "enabling MSI failed: %d\n", ret); > + /* reset all the states of crtc/plane/encoder/connector */ > + drm_mode_config_reset(dev); > + > + ret = drm_dev_register(dev, 0); > + if (ret) { > + drm_err(dev, "failed to register drv for userspace access: %d\n", > + ret); > + goto err_return; > + } > + drm_client_setup(dev, NULL); > + > + return 0; > + > +err_return: > + return ret; > +} > + > +static void yhgch_pci_remove(struct pci_dev *pdev) > +{ > + struct drm_device *dev = pci_get_drvdata(pdev); > + > + drm_dev_unregister(dev); > + drm_dev_put(dev); > +} > + > +static void yhgch_pci_shutdown(struct pci_dev *pdev) > +{ > + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); > +} > + > +static struct pci_device_id yhgch_pci_table[] = { > + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, > + { 0, } > +}; > + > +static struct pci_driver yhgch_pci_driver = { > + .name = "yhgch-drm", > + .id_table = yhgch_pci_table, > + .probe = yhgch_pci_probe, > + .remove = yhgch_pci_remove, > + .shutdown = yhgch_pci_shutdown, > + .driver.pm = &yhgch_pm_ops, > +}; > + > +drm_module_pci_driver(yhgch_pci_driver); > + > +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); > +MODULE_AUTHOR("Chu Guangqing <chuguangqing@inspur.com>"); > +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); > +MODULE_LICENSE("GPL"); > +MODULE_VERSION("3.1"); > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h > new file mode 100644 > index 000000000000..1b8b1e5b0a43 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h > @@ -0,0 +1,51 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_DRV_H > +#define YHGCH_DRM_DRV_H > + > +#include <linux/gpio/consumer.h> > +#include <linux/i2c-algo-bit.h> > +#include <linux/i2c.h> > +#include <linux/version.h> > +#include <linux/bitfield.h> > +#include <drm/drm_framebuffer.h> > +#include <drm/drm_encoder.h> > + > +struct yhgch_ddc { > + struct yhgch_drm_private *priv; > + struct i2c_adapter adapter; > + struct i2c_algo_bit_data bit_data; > +}; > + > +struct yhgch_drm_private { > + /* hw */ > + void __iomem *mmio; > + void __iomem *vram_base; > + > + /* drm */ > + struct drm_device dev; > + struct drm_plane primary_plane; > + struct drm_crtc crtc; > + struct drm_encoder encoder; > + struct drm_connector connector; > +}; > + > +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) > +{ > + return container_of(dev, struct yhgch_drm_private, dev); > +} > + > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, > + u32 power_mode); > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, > + u32 gate); > + > +int yhgch_de_init(struct yhgch_drm_private *priv); > +int yhgch_vdac_init(struct yhgch_drm_private *priv); > +int yhgch_mm_init(struct yhgch_drm_private *yhgch); > +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args); > + > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > new file mode 100644 > index 000000000000..7bbe9a0540d4 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > @@ -0,0 +1,114 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <linux/pci.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_probe_helper.h> > + > +#include <drm/drm_managed.h> > + > +#include "yhgch_drm_drv.h" > + > +#define GPIO_DATA 0x0802A0 > +#define GPIO_DATA_DIRECTION 0x0802A4 > + > +#define I2C_SCL_MASK BIT(0) > +#define I2C_SDA_MASK BIT(1) > + > +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) > +{ > + struct yhgch_ddc *ddc = data; > + struct yhgch_drm_private *priv = ddc->priv; > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if (value) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } else { > + u32 tmp_data = readl(priv->mmio + GPIO_DATA); > + > + tmp_data &= ~mask; > + writel(tmp_data, priv->mmio + GPIO_DATA); > + > + tmp_dir |= mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > +} > + > +static int yhgch_get_i2c_signal(void *data, u32 mask) > +{ > + struct yhgch_ddc *ddc = data; > + struct yhgch_drm_private *priv = ddc->priv; > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if ((tmp_dir & mask) != mask) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > + > + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; > +} > + > +static void yhgch_ddc_setsda(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); > +} > + > +static void yhgch_ddc_setscl(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); > +} > + > +static int yhgch_ddc_getsda(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); > +} > + > +static int yhgch_ddc_getscl(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); > +} > + > +static void yhgch_ddc_release(struct drm_device *dev, void *res) > +{ > + struct yhgch_ddc *ddc = res; > + > + i2c_del_adapter(&ddc->adapter); > +} > + > +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv) > +{ > + int ret = 0; > + struct yhgch_ddc *ddc; > + struct drm_device *dev = &priv->dev; > + > + ddc = drmm_kzalloc(dev, sizeof(struct yhgch_ddc), GFP_KERNEL); > + if (!ddc) > + return ERR_PTR(-ENOMEM); > + > + ddc->adapter.owner = THIS_MODULE; > + ddc->priv = priv; > + snprintf(ddc->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); > + ddc->adapter.dev.parent = priv->dev.dev; > + i2c_set_adapdata(&ddc->adapter, ddc); > + ddc->adapter.algo_data = &ddc->bit_data; > + > + ddc->bit_data.udelay = 20; > + ddc->bit_data.timeout = usecs_to_jiffies(2000); > + ddc->bit_data.data = ddc; > + ddc->bit_data.setsda = yhgch_ddc_setsda; > + ddc->bit_data.setscl = yhgch_ddc_setscl; > + ddc->bit_data.getsda = yhgch_ddc_getsda; > + ddc->bit_data.getscl = yhgch_ddc_getscl; > + > + ret = i2c_bit_add_bus(&ddc->adapter); > + if (ret) > + return ERR_PTR(ret); > + > + ret = drmm_add_action_or_reset(&priv->dev, yhgch_ddc_release, ddc); > + if (ret) > + return ERR_PTR(ret); > + > + return &ddc->adapter; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h > new file mode 100644 > index 000000000000..cecb6173a445 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h > @@ -0,0 +1,208 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_HW_H > +#define YHGCH_DRM_HW_H > + > +/* register definition */ > +#define YHGCH_MISC_CTRL 0x4 > + > +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) > +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 > + > +#define YHGCH_CURRENT_GATE 0x000040 > +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) > +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 > + > +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) > +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 > + > +#define YHGCH_MODE0_GATE 0x000044 > +#define YHGCH_MODE1_GATE 0x000048 > +#define YHGCH_POWER_MODE_CTRL 0x00004C > + > +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) > +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 > + > +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) > +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 > +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 > + > +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 > +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 > +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 > + > +//#define YHGCH_CRT_PLL_CTRL 0x000060 > + > +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) > +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 > + > +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) > +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 > + > +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) > +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 > + > +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) > +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 > + > +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) > +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 > + > +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) > +#define YHGCH_PLL_CTRL_N_MASK 0xF00 > + > +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) > +#define YHGCH_PLL_CTRL_M_MASK 0xFF > + > +#define YHGCH_CRT_DISP_CTL 0x80200 > + > +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) > +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 > + > +#define YHGCH_CRT_DPMS_ON 0 > +#define YHGCH_CRT_DPMS_OFF 3 > + > +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) > +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 > + > +#define YHGCH_CRTSELECT_CRT 1 > + > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 > + > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 > + > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 > + > +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) > +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 > + > +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) > +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 > + > +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) > +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 > + > +#define YHGCH_CRT_FB_ADDRESS 0x080204 > + > +#define YHGCH_CRT_FB_WIDTH 0x080208 > +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 > +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) > +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF > + > +#define YHGCH_CRT_HORZ_TOTAL 0x08020C > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 > + > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF > + > +#define YHGCH_CRT_HORZ_SYNC 0x080210 > +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 > + > +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF > + > +#define YHGCH_CRT_VERT_TOTAL 0x080214 > +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 > + > +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF > + > +#define YHGCH_CRT_VERT_SYNC 0x080218 > +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) > +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 > + > +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF > + > +/* Hardware Cursor */ > +#define YHGCH_HWC_ADDRESS 0x080230 > +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) > +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 > +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) > +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF > + > +#define YHGCH_HWC_LOCATION 0x080234 > +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) > +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 > +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) > +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 > +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) > +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 > +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) > +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF > + > +#define YHGCH_HWC_COLOR_12 0x080238 > +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) > +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 > +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF > + > +#define YHGCH_HWC_COLOR_3 0x08023C > +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF > + > +/* Auto Centering */ > +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF > + > +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF > + > +/* register to control panel output */ > +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 > +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) > +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) > +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) > +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) > + > +#define YHGCH_RAW_INTERRUPT 0x80290 > +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 > + > +#define YHGCH_RAW_INTERRUPT_EN 0x80298 > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 > + > +/* register and values for PLL control */ > +#define CRT_PLL1_NS 0x802a8 > +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) > +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) > +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) > + > +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 > +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 > +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 > +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 > +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 > +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 > +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 > +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 > +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 > + > +#define CRT_PLL2_NS 0x802ac > +#define CRT_PLL2_NS_25MHZ 0x0 > +#define CRT_PLL2_NS_40MHZ 0x0 > +#define CRT_PLL2_NS_65MHZ 0x0 > +#define CRT_PLL2_NS_83MHZ 0x0 > +#define CRT_PLL2_NS_106MHZ 0x0 > +#define CRT_PLL2_NS_108MHZ 0x0 > +#define CRT_PLL2_NS_146MHZ 0x0 > +#define CRT_PLL2_NS_148MHZ 0x0 > +#define CRT_PLL2_NS_193MHZ 0x0 > + > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > new file mode 100644 > index 000000000000..2e222af29f69 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > @@ -0,0 +1,134 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include <linux/io.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_probe_helper.h> > +#include <drm/drm_print.h> > +#include <drm/drm_simple_kms_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +static int yhgch_connector_get_modes(struct drm_connector *connector) > +{ > + int count; > + const struct drm_edid *drm_edid; > + > + drm_edid = drm_edid_read(connector); > + if (drm_edid) { > + drm_edid_connector_update(connector, drm_edid); > + count = drm_edid_connector_add_modes(connector); > + if (count) > + goto out; > + } > + > + count = drm_add_modes_noedid(connector, > + connector->dev->mode_config.max_width, > + connector->dev->mode_config.max_height); > + drm_set_preferred_mode(connector, 1024, 768); > + > +out: > + drm_edid_free(drm_edid); > + return count; > +} > + > +static int yhgch_connector_helper_detect_from_ddc(struct drm_connector *connector, > + struct drm_modeset_acquire_ctx *ctx, > + bool force) > +{ > + if (drm_connector_helper_detect_from_ddc(connector, ctx, force) > + != connector_status_connected) { > + drm_dbg_kms(connector->dev, "ddc detect failed, force connect\n"); > + } > + return connector_status_connected; > +} > + > +static const struct drm_connector_helper_funcs > + yhgch_connector_helper_funcs = { > + .get_modes = yhgch_connector_get_modes, > + .detect_ctx = yhgch_connector_helper_detect_from_ddc, > +}; > + > +static const struct drm_connector_funcs yhgch_connector_funcs = { > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = drm_connector_cleanup, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static void yhgch_encoder_enable(struct drm_encoder *encoder) > +{ > + u32 reg; > + struct drm_device *dev = encoder->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); > + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); > + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > +} > + > +static void yhgch_encoder_disable(struct drm_encoder *encoder) > +{ > + u32 reg = 0, regmask = 0; > + struct drm_device *dev = encoder->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > + regmask |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); > + regmask |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); > + regmask |= YHGCH_DISPLAY_CONTROL_FPEN(1); > + regmask |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); > + reg &= ~regmask; > + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > +} > + > +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { > + .enable = yhgch_encoder_enable, > + .disable = yhgch_encoder_disable, > +}; > + > +int yhgch_vdac_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct drm_encoder *encoder = &priv->encoder; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_connector *connector = &priv->connector; > + struct i2c_adapter *ddc; > + int ret; > + > + ddc = yhgch_ddc_create(priv); > + if (IS_ERR(ddc)) { > + ret = PTR_ERR(ddc); > + drm_err(dev, "failed to create ddc: %d\n", ret); > + return ret; > + } > + > + encoder->possible_crtcs = drm_crtc_mask(crtc); > + ret = drmm_encoder_init(dev, encoder, NULL, DRM_MODE_ENCODER_DAC, NULL); > + if (ret) { > + drm_err(dev, "failed to init encoder: %d\n", ret); > + return ret; > + } > + > + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); > + > + ret = drm_connector_init_with_ddc(dev, connector, > + &yhgch_connector_funcs, > + DRM_MODE_CONNECTOR_VGA, > + ddc); > + if (ret) { > + drm_err(dev, "failed to init connector: %d\n", ret); > + return ret; > + } > + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); > + > + drm_connector_attach_encoder(connector, encoder); > + > + return 0; > +} > -- > 2.43.5 > -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: [PATCH v7 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-29 9:07 ` Dmitry Baryshkov @ 2025-09-29 11:00 ` Chu Guangqing 0 siblings, 0 replies; 14+ messages in thread From: Chu Guangqing @ 2025-09-29 11:00 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: linux-kernel, dri-devel, Chu Guangqing Hi Dmitry, > On Mon, Sep 29, 2025 at 02:31:03PM +0800, Chu Guangqing wrote: > > add support for Yhgc BMC soc chipset > > So... Again, what is Yhgc? Please expand your commit message, MAINTAINERS > and Kconfig entries. (this is a usual thing: if you get a review question, it > usually means that you need to provide more information _in_ the patch > rather than just reporting on the mailing list). I'd suggest adding full company > name and maybe a website as a comment inside the driver code. Otherwise it > would be very hard to assess in few years whether it's something that is still in > use, whether it needs improvements, etc. > This is a spelling error, it should be YHGCH. which has been corrected and is now in uppercase. The chip introduction has been added to the commit message, and the company's website has been included in the MAINTAINERS file and the source code. The v8 patch: https://lore.kernel.org/all/20250929104831.8548-1-chuguangqing@inspur.com/ > > > > Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> > > --- > > MAINTAINERS | 5 + > > drivers/gpu/drm/Kconfig | 2 + > > drivers/gpu/drm/Makefile | 1 + > > drivers/gpu/drm/yhgch/Kconfig | 11 + > > drivers/gpu/drm/yhgch/Makefile | 4 + > > drivers/gpu/drm/yhgch/yhgch_drm_de.c | 398 Best Regards, Chu Guangqing ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v8 0/1] [DRIVER] gpu: drm: add support for YHGCH ZX1000 soc chipset 2025-09-29 6:31 ` [PATCH v7 0/1] " Chu Guangqing 2025-09-29 6:31 ` [PATCH v7 1/1] " Chu Guangqing @ 2025-09-29 10:48 ` Chu Guangqing 2025-09-29 10:48 ` [PATCH v8 1/1] " Chu Guangqing 2025-10-05 22:56 ` [PATCH v8 0/1] " Dmitry Baryshkov 1 sibling, 2 replies; 14+ messages in thread From: Chu Guangqing @ 2025-09-29 10:48 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: linux-kernel, dri-devel, Chu Guangqing v8: - Use YHGCH uniformly and add the company's official website. v7: - Delete the three preceding function definitions - delete Delete the redundant code and comments (https://lore.kernel.org/all/20250929063103.7375-1-chuguangqing@inspur.com/) v6: - simplify to return drm_atomic_helper_check_plane_state() - remove empty line - remove call drm_probe_ddc and smidebug - replace drm_err with drm_dbg_kms - add callback .disable (https://lore.kernel.org/all/20250928054123.32895-1-chuguangqing@inspur.com/) v5: - remove extra level of subdiretories, change to driver/gpu/drm/yhgch - remove else from > + else if (!new_plane_state->visible) - remove extra check in function yhgch_plane_atomic_check - remove the extra parentheses - change the author like other modules - use drm_edit_read function instead drm_get_edit - remove debug info drm_warn call - rename function name smi_connector_helper_detect_from_ddc to yhgch_connector_helper_detect_from_ddc, remove extra return statement. (https://lore.kernel.org/all/20250925091715.12739-1-chuguangqing@inspur.com/) v4: - remove VRAM helpers from Kconfig - use the coding style in ast/mgag200 for the DDC - use plane_state->dst instead of crtc_h/w/x/y. - delete duplicate framebuffer's atomic_check. - use FIELD_PREP() directly. - use dev->mode_config. - delete unnecessary drm_atomic_helper_shutdown call - add AUTHOR - using .enable instead (https://lore.kernel.org/all/20250924064954.3921-1-chuguangqing@inspur.com/) v3: - The order of the code blocks has been adjusted, and the "warn-on" branch has been removed. - removed the related formats for the alpha channel. - removed the atomic_flush function. - have removed the empty line. - have removed the error message here. - replaced it with the drmm_encoder_init function. (https://lore.kernel.org/all/20250910022311.2655-1-chuguangqing@inspur.com/) v2: - Delete unnecessary comments - Delete unnecessary branch - Use drm_atomic_helper_check_plane_state - remove the alpha formats form this list. - use w,h rather than x, y - delete type casting - use a simple call to drm_atomic_helper_shutdown() - delete yhgch_load function - delete vblanking code - delete unneeded i2c type (https://lore.kernel.org/all/20250903054533.68540-1-chuguangqing@inspur.com/) v1: (https://lore.kernel.org/all/20250808053508.52202-1-chuguangqing@inspur.com/) Chu Guangqing (1): [DRIVER] gpu: drm: add support for YHGCH ZX1000 soc chipset MAINTAINERS | 6 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 11 + drivers/gpu/drm/yhgch/Makefile | 4 + drivers/gpu/drm/yhgch/yhgch_drm_de.c | 398 +++++++++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 308 +++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 ++++ drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 134 +++++++++ 11 files changed, 1237 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c -- 2.43.5 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v8 1/1] [DRIVER] gpu: drm: add support for YHGCH ZX1000 soc chipset 2025-09-29 10:48 ` [PATCH v8 0/1] [DRIVER] gpu: drm: add support for YHGCH " Chu Guangqing @ 2025-09-29 10:48 ` Chu Guangqing 2025-09-29 11:39 ` Jani Nikula 2025-10-05 23:06 ` Dmitry Baryshkov 2025-10-05 22:56 ` [PATCH v8 0/1] " Dmitry Baryshkov 1 sibling, 2 replies; 14+ messages in thread From: Chu Guangqing @ 2025-09-29 10:48 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: linux-kernel, dri-devel, Chu Guangqing add support for ZX1000 BMC soc chipset The ZX1000 (Z106) chip is a self-developed server management chip of the "Zhixin Series" by Yunhai Guochuang. It can monitor the operating status of servers in real time and perform various remote management operations on servers, including remote system installation, restart, power-on and power-off. It supports instruction sets of mainstream processor architectures such as X86, ARM, and LoongArch, with fully open firmware and software interfaces that are compatible with the third-party application ecosystem. Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> --- MAINTAINERS | 6 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 11 + drivers/gpu/drm/yhgch/Makefile | 4 + drivers/gpu/drm/yhgch/yhgch_drm_de.c | 398 +++++++++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 308 +++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 ++++ drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 134 +++++++++ 11 files changed, 1237 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c diff --git a/MAINTAINERS b/MAINTAINERS index 520fb4e379a3..8f861858c6e3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -27781,6 +27781,12 @@ S: Maintained F: Documentation/input/devices/yealink.rst F: drivers/input/misc/yealink.* +YHGCH DRM DRIVER +M: Chu Guangqing <chuguangqing@inspur.com> +S: Maintained +F: drivers/gpu/drm/yhgch +W: https://www.yhgch.com + Z8530 DRIVER FOR AX.25 M: Joerg Reuter <jreuter@yaina.de> L: linux-hams@vger.kernel.org diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index f7ea8e895c0c..8e0b1d12c81f 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" source "drivers/gpu/drm/imagination/Kconfig" +source "drivers/gpu/drm/yhgch/Kconfig" + config DRM_HYPERV tristate "DRM Support for Hyper-V synthetic video device" depends on DRM && PCI && HYPERV diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 4dafbdc8f86a..f344e0173b29 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -231,6 +231,7 @@ obj-y += solomon/ obj-$(CONFIG_DRM_SPRD) += sprd/ obj-$(CONFIG_DRM_LOONGSON) += loongson/ obj-$(CONFIG_DRM_POWERVR) += imagination/ +obj-$(CONFIG_DRM_YHGCH) += yhgch/ # Ensure drm headers are self-contained and pass kernel-doc hdrtest-files := \ diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig new file mode 100644 index 000000000000..887cb66aa305 --- /dev/null +++ b/drivers/gpu/drm/yhgch/Kconfig @@ -0,0 +1,11 @@ +config DRM_YHGCH + tristate "DRM Support for YHGCH BMC" + depends on DRM && PCI && MMU + select DRM_CLIENT_SELECTION + select DRM_KMS_HELPER + select DRM_GEM_SHMEM_HELPER + help + Choose this option if you have a YHGCH ZX1000 chipset. + If M is selected the module will be called yhgch-drm. + IF Y is selected the module will be built into the kernel. + IF N is selected the module will be excluded from the kernel. diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile new file mode 100644 index 000000000000..30de2fd27f18 --- /dev/null +++ b/drivers/gpu/drm/yhgch/Makefile @@ -0,0 +1,4 @@ +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o + +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o + diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch_drm_de.c new file mode 100644 index 000000000000..1a72b5517618 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_de.c @@ -0,0 +1,398 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <drm/drm_atomic.h> +#include <drm/drm_gem_atomic_helper.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_gem_shmem_helper.h> +#include <drm/drm_format_helper.h> +#include <drm/drm_damage_helper.h> +#include <drm/drm_fourcc.h> + +#include <drm/drm_vblank.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +struct yhgch_dislay_pll_config { + u64 hdisplay; + u64 vdisplay; + u32 pll1_config_value; + u32 pll2_config_value; +}; + +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, +}; + +static int yhgch_plane_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, + plane); + struct drm_framebuffer *fb = new_plane_state->fb; + struct drm_crtc_state *new_crtc_state = NULL; + + if (!fb) + return 0; + + if (new_plane_state->crtc) + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); + + return drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, + DRM_PLANE_NO_SCALING, + DRM_PLANE_NO_SCALING, + false, true); +} + +static void yhgch_handle_damage(void __iomem *addr_base, struct iosys_map *src, + struct drm_framebuffer *fb, + struct drm_rect *clip) +{ + struct iosys_map dst; + + iosys_map_set_vaddr_iomem(&dst, addr_base); + iosys_map_incr(&dst, drm_fb_clip_offset(fb->pitches[0], fb->format, clip)); + drm_fb_memcpy(&dst, fb->pitches, src, fb, clip); +} + +static void yhgch_plane_atomic_update(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); + struct drm_framebuffer *fb = plane_state->fb; + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); + struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); + struct drm_atomic_helper_damage_iter iter; + struct drm_rect damage; + u32 reg; + s64 gpu_addr = 0; + u32 line_l; + + if (!plane_state->crtc || !plane_state->fb) + return; + + if (!plane_state->visible) + return; + + drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); + drm_atomic_for_each_plane_damage(&iter, &damage) { + yhgch_handle_damage(priv->vram_base, shadow_plane_state->data, fb, &damage); + } + + fb->pitches[0] = (fb->pitches[0] + 15) & ~15; + + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); + + reg = fb->width * fb->format->cpp[0]; + + line_l = fb->pitches[0]; + writel(FIELD_PREP(YHGCH_CRT_FB_WIDTH_WIDTH_MASK, reg) | + FIELD_PREP(YHGCH_CRT_FB_WIDTH_OFFS_MASK, line_l), + priv->mmio + YHGCH_CRT_FB_WIDTH); + + /* SET PIXEL FORMAT */ + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, + fb->format->cpp[0] * 8 / 16); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static const u32 channel_formats1[] = { + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, + DRM_FORMAT_XRGB8888, +}; + +static struct drm_plane_funcs yhgch_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, + DRM_GEM_SHADOW_PLANE_FUNCS, +}; + +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { + DRM_GEM_SHADOW_PLANE_HELPER_FUNCS, + .atomic_check = yhgch_plane_atomic_check, + .atomic_update = yhgch_plane_atomic_update, +}; + +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) +{ + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + u32 reg; + + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_DPMS_MASK, dpms); + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; + if (dpms == YHGCH_CRT_DPMS_ON) + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + reg |= YHGCH_CURR_GATE_DISPLAY(1); + yhgch_set_current_gate(priv, reg); + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); +} + +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(0); + reg |= YHGCH_CURR_GATE_DISPLAY(0); + yhgch_set_current_gate(priv, reg); +} + +static enum drm_mode_status +yhgch_crtc_mode_valid(struct drm_crtc *crtc, + const struct drm_display_mode *mode) +{ + size_t i = 0; + int vrefresh = drm_mode_vrefresh(mode); + + if (vrefresh < 59 || vrefresh > 61) + return MODE_NOCLOCK; + + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && + yhgch_pll_table[i].vdisplay == mode->vdisplay) + return MODE_OK; + } + + return MODE_BAD; +} + +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) +{ + u32 val; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + val = readl(priv->mmio + CRT_PLL1_NS); + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); + writel(val, priv->mmio + CRT_PLL1_NS); + + writel(pll, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val = pll & ~(CRT_PLL1_NS_POWERON(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val |= CRT_PLL1_NS_OUTER_BYPASS(1); + writel(val, priv->mmio + CRT_PLL1_NS); +} + +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) +{ + size_t i; + size_t count = ARRAY_SIZE(yhgch_pll_table); + + for (i = 0; i < count; i++) { + if (yhgch_pll_table[i].hdisplay == x && + yhgch_pll_table[i].vdisplay == y) { + *pll1 = yhgch_pll_table[i].pll1_config_value; + *pll2 = yhgch_pll_table[i].pll2_config_value; + return; + } + } +} + +/* + * This function takes care the extra registers and bit fields required to + * setup a mode in board. + * Explanation about Display Control register: + * FPGA only supports 7 predefined pixel clocks, and clock select is + * in bit 4:0 of new register 0x802a8. + */ +static u32 display_ctrl_adjust(struct drm_device *dev, + struct drm_display_mode *mode, + u32 ctrl) +{ + u64 w, h; + u32 pll1; /* bit[31:0] of PLL */ + u32 pll2; /* bit[63:32] of PLL */ + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + w = mode->hdisplay; + h = mode->vdisplay; + + get_pll_config(w, h, &pll1, &pll2); + writel(pll2, priv->mmio + CRT_PLL2_NS); + set_vclock_yhgch(dev, pll1); + + /* + * yhgch has to set up the top-left and bottom-right + * registers as well. + * Note that normal chip only use those two register for + * auto-centering mode. + */ + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK, 0) | + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK, 0), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); + + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK, h - 1) | + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK, w - 1), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); + + /* + * Assume common fields in ctrl have been properly set before + * calling this function. + * This function only sets the extra fields in ctrl. + */ + + /* Set bit 25 of display controller: Select CRT or VGA clock */ + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; + + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); + + /* clock_phase_polarity is 0 */ + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); + ctrl |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, 2); + + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); + + return ctrl; +} + +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) +{ + u32 val; + struct drm_display_mode *mode = &crtc->state->mode; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + u32 width = mode->hsync_end - mode->hsync_start; + u32 height = mode->vsync_end - mode->vsync_start; + + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); + writel(FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK, mode->htotal - 1) | + FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK, mode->hdisplay - 1), + priv->mmio + YHGCH_CRT_HORZ_TOTAL); + + writel(FIELD_PREP(YHGCH_CRT_HORZ_SYNC_WIDTH_MASK, width) | + FIELD_PREP(YHGCH_CRT_HORZ_SYNC_START_MASK, mode->hsync_start - 1), + priv->mmio + YHGCH_CRT_HORZ_SYNC); + + writel(FIELD_PREP(YHGCH_CRT_VERT_TOTAL_TOTAL_MASK, mode->vtotal - 1) | + FIELD_PREP(YHGCH_CRT_VERT_TOTAL_DISP_END_MASK, mode->vdisplay - 1), + priv->mmio + YHGCH_CRT_VERT_TOTAL); + + writel(FIELD_PREP(YHGCH_CRT_VERT_SYNC_HEIGHT_MASK, height) | + FIELD_PREP(YHGCH_CRT_VERT_SYNC_START_MASK, mode->vsync_start - 1), + priv->mmio + YHGCH_CRT_VERT_SYNC); + + val = FIELD_PREP(YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK, 0); + val |= FIELD_PREP(YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK, 0); + val |= YHGCH_CRT_DISP_CTL_TIMING(1); + val |= YHGCH_CRT_DISP_CTL_PLANE(1); + + display_ctrl_adjust(dev, mode, val); +} + +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + yhgch_set_current_gate(priv, reg); +} + +static const struct drm_crtc_funcs yhgch_crtc_funcs = { + .page_flip = drm_atomic_helper_page_flip, + .set_config = drm_atomic_helper_set_config, + .destroy = drm_crtc_cleanup, + .reset = drm_atomic_helper_crtc_reset, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, +}; + +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { + .mode_set_nofb = yhgch_crtc_mode_set_nofb, + .atomic_begin = yhgch_crtc_atomic_begin, + .atomic_enable = yhgch_crtc_atomic_enable, + .atomic_disable = yhgch_crtc_atomic_disable, + .mode_valid = yhgch_crtc_mode_valid, +}; + +int yhgch_de_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_crtc *crtc = &priv->crtc; + struct drm_plane *plane = &priv->primary_plane; + int ret; + + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, + channel_formats1, + ARRAY_SIZE(channel_formats1), + NULL, + DRM_PLANE_TYPE_PRIMARY, + NULL); + if (ret) { + drm_err(dev, "failed to init plane: %d\n", ret); + return ret; + } + + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); + drm_plane_enable_fb_damage_clips(plane); + + ret = drm_crtc_init_with_planes(dev, crtc, plane, + NULL, &yhgch_crtc_funcs, NULL); + if (ret) { + drm_err(dev, "failed to init crtc: %d\n", ret); + return ret; + } + + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); + + return 0; +} diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c new file mode 100644 index 000000000000..69ddb235f2ea --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/bitfield.h> + +#include <linux/aperture.h> +#include <drm/clients/drm_client_setup.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_fbdev_ttm.h> + +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_fbdev_shmem.h> +#include <drm/drm_gem_shmem_helper.h> +#include <drm/drm_managed.h> +#include <drm/drm_module.h> +#include <drm/drm_vblank.h> + +#include <drm/drm_probe_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +DEFINE_DRM_GEM_FOPS(yhgch_fops); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + args->width = ALIGN(args->width, 8); + return drm_gem_shmem_dumb_create(file, dev, args); +} + +static struct drm_driver yhgch_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .fops = &yhgch_fops, + .name = "yhgch", + .desc = "yhgch drm driver", + .major = 3, + .minor = 1, + .dumb_create = yhgch_dumb_create, + DRM_FBDEV_SHMEM_DRIVER_OPS, +}; + +static int __maybe_unused yhgch_pm_suspend(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_suspend(drm_dev); +} + +static int __maybe_unused yhgch_pm_resume(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_resume(drm_dev); +} + +static const struct dev_pm_ops yhgch_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, + yhgch_pm_resume) +}; + +static const struct drm_mode_config_funcs yhgch_mode_funcs = { + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, + .fb_create = drm_gem_fb_create_with_dirty, +}; + +static int yhgch_kms_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + int ret; + + ret = drmm_mode_config_init(dev); + if (ret) + return ret; + + dev->mode_config.min_width = 0; + dev->mode_config.min_height = 0; + dev->mode_config.max_width = 1920; + dev->mode_config.max_height = 1200; + dev->mode_config.preferred_depth = 24; + dev->mode_config.prefer_shadow = 1; + dev->mode_config.funcs = &yhgch_mode_funcs; + + ret = yhgch_de_init(priv); + if (ret) { + drm_err(dev, "failed to init de: %d\n", ret); + return ret; + } + + ret = yhgch_vdac_init(priv); + if (ret) { + drm_err(dev, "failed to init vdac: %d\n", ret); + return ret; + } + drm_kms_helper_poll_init(dev); + + return 0; +} + +/* + * It can operate in one of three modes: 0, 1 or Sleep. + */ +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) +{ + unsigned int control_value = 0; + void __iomem *mmio = priv->mmio; + u32 input = 1; + + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) + return; + + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) + input = 0; + + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_MODE_MASK, power_mode); + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_OSC_INPUT_MASK, input); + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); +} + +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) +{ + u32 gate_reg; + u32 mode; + void __iomem *mmio = priv->mmio; + + /* Get current power mode. */ + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; + + switch (mode) { + case YHGCH_PW_MODE_CTL_MODE_MODE0: + gate_reg = YHGCH_MODE0_GATE; + break; + + case YHGCH_PW_MODE_CTL_MODE_MODE1: + gate_reg = YHGCH_MODE1_GATE; + break; + + default: + gate_reg = YHGCH_MODE0_GATE; + break; + } + writel(gate, mmio + gate_reg); +} + +static void yhgch_hw_config(struct yhgch_drm_private *priv) +{ + u32 reg; + + /* On hardware reset, power mode 0 is default. */ + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + + yhgch_set_current_gate(priv, reg); + + /* + * Reset the memory controller. If the memory controller + * is not reset in chip,the system might hang when sw accesses + * the memory.The memory should be resetted after + * changing the MXCLK. + */ + reg = readl(priv->mmio + YHGCH_MISC_CTRL); + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); + writel(reg, priv->mmio + YHGCH_MISC_CTRL); + + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); + + writel(reg, priv->mmio + YHGCH_MISC_CTRL); +} + +static int yhgch_hw_map(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + resource_size_t ioaddr, iosize; + + ioaddr = pci_resource_start(pdev, 1); + iosize = pci_resource_len(pdev, 1); + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); + if (!priv->mmio) { + drm_err(dev, "Cannot map mmio region\n"); + return -ENOMEM; + } + + ioaddr = pci_resource_start(pdev, 0); + iosize = pci_resource_len(pdev, 0); + priv->vram_base = devm_ioremap_wc(dev->dev, ioaddr, iosize); + if (!priv->vram_base) { + drm_err(dev, "Cannot map vram region\n"); + return -ENOMEM; + } + return 0; +} + +static int yhgch_hw_init(struct yhgch_drm_private *priv) +{ + int ret; + + ret = yhgch_hw_map(priv); + if (ret) + return ret; + yhgch_hw_config(priv); + return 0; +} + +static int yhgch_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct yhgch_drm_private *priv; + struct drm_device *dev; + int ret; + + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); + + if (ret) + return ret; + + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, + struct yhgch_drm_private, dev); + + if (IS_ERR(priv)) + return PTR_ERR(priv); + + dev = &priv->dev; + pci_set_drvdata(pdev, dev); + + ret = pcim_enable_device(pdev); + if (ret) { + drm_err(dev, "failed to enable pci device: %d\n", ret); + goto err_return; + } + + ret = yhgch_hw_init(priv); + if (ret) + goto err_return; + + ret = yhgch_kms_init(priv); + if (ret) + goto err_return; + + ret = pci_enable_msi(pdev); + if (ret) + drm_warn(dev, "enabling MSI failed: %d\n", ret); + /* reset all the states of crtc/plane/encoder/connector */ + drm_mode_config_reset(dev); + + ret = drm_dev_register(dev, 0); + if (ret) { + drm_err(dev, "failed to register drv for userspace access: %d\n", + ret); + goto err_return; + } + drm_client_setup(dev, NULL); + + return 0; + +err_return: + return ret; +} + +static void yhgch_pci_remove(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + + drm_dev_unregister(dev); + drm_dev_put(dev); +} + +static void yhgch_pci_shutdown(struct pci_dev *pdev) +{ + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); +} + +static struct pci_device_id yhgch_pci_table[] = { + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, } +}; + +static struct pci_driver yhgch_pci_driver = { + .name = "yhgch-drm", + .id_table = yhgch_pci_table, + .probe = yhgch_pci_probe, + .remove = yhgch_pci_remove, + .shutdown = yhgch_pci_shutdown, + .driver.pm = &yhgch_pm_ops, +}; + +drm_module_pci_driver(yhgch_pci_driver); + +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); +MODULE_AUTHOR("Chu Guangqing <chuguangqing@inspur.com>"); +MODULE_DESCRIPTION("DRM Driver for YHGCH ZX1000 BMC. company website: https://www.yhgch.com"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("3.1"); diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h new file mode 100644 index 000000000000..1b8b1e5b0a43 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_DRV_H +#define YHGCH_DRM_DRV_H + +#include <linux/gpio/consumer.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> +#include <linux/version.h> +#include <linux/bitfield.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_encoder.h> + +struct yhgch_ddc { + struct yhgch_drm_private *priv; + struct i2c_adapter adapter; + struct i2c_algo_bit_data bit_data; +}; + +struct yhgch_drm_private { + /* hw */ + void __iomem *mmio; + void __iomem *vram_base; + + /* drm */ + struct drm_device dev; + struct drm_plane primary_plane; + struct drm_crtc crtc; + struct drm_encoder encoder; + struct drm_connector connector; +}; + +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) +{ + return container_of(dev, struct yhgch_drm_private, dev); +} + +void yhgch_set_power_mode(struct yhgch_drm_private *priv, + u32 power_mode); +void yhgch_set_current_gate(struct yhgch_drm_private *priv, + u32 gate); + +int yhgch_de_init(struct yhgch_drm_private *priv); +int yhgch_vdac_init(struct yhgch_drm_private *priv); +int yhgch_mm_init(struct yhgch_drm_private *yhgch); +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args); + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c new file mode 100644 index 000000000000..7bbe9a0540d4 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_probe_helper.h> + +#include <drm/drm_managed.h> + +#include "yhgch_drm_drv.h" + +#define GPIO_DATA 0x0802A0 +#define GPIO_DATA_DIRECTION 0x0802A4 + +#define I2C_SCL_MASK BIT(0) +#define I2C_SDA_MASK BIT(1) + +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) +{ + struct yhgch_ddc *ddc = data; + struct yhgch_drm_private *priv = ddc->priv; + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if (value) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } else { + u32 tmp_data = readl(priv->mmio + GPIO_DATA); + + tmp_data &= ~mask; + writel(tmp_data, priv->mmio + GPIO_DATA); + + tmp_dir |= mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } +} + +static int yhgch_get_i2c_signal(void *data, u32 mask) +{ + struct yhgch_ddc *ddc = data; + struct yhgch_drm_private *priv = ddc->priv; + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if ((tmp_dir & mask) != mask) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } + + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; +} + +static void yhgch_ddc_setsda(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); +} + +static void yhgch_ddc_setscl(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); +} + +static int yhgch_ddc_getsda(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); +} + +static int yhgch_ddc_getscl(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); +} + +static void yhgch_ddc_release(struct drm_device *dev, void *res) +{ + struct yhgch_ddc *ddc = res; + + i2c_del_adapter(&ddc->adapter); +} + +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv) +{ + int ret = 0; + struct yhgch_ddc *ddc; + struct drm_device *dev = &priv->dev; + + ddc = drmm_kzalloc(dev, sizeof(struct yhgch_ddc), GFP_KERNEL); + if (!ddc) + return ERR_PTR(-ENOMEM); + + ddc->adapter.owner = THIS_MODULE; + ddc->priv = priv; + snprintf(ddc->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); + ddc->adapter.dev.parent = priv->dev.dev; + i2c_set_adapdata(&ddc->adapter, ddc); + ddc->adapter.algo_data = &ddc->bit_data; + + ddc->bit_data.udelay = 20; + ddc->bit_data.timeout = usecs_to_jiffies(2000); + ddc->bit_data.data = ddc; + ddc->bit_data.setsda = yhgch_ddc_setsda; + ddc->bit_data.setscl = yhgch_ddc_setscl; + ddc->bit_data.getsda = yhgch_ddc_getsda; + ddc->bit_data.getscl = yhgch_ddc_getscl; + + ret = i2c_bit_add_bus(&ddc->adapter); + if (ret) + return ERR_PTR(ret); + + ret = drmm_add_action_or_reset(&priv->dev, yhgch_ddc_release, ddc); + if (ret) + return ERR_PTR(ret); + + return &ddc->adapter; +} diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h new file mode 100644 index 000000000000..cecb6173a445 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h @@ -0,0 +1,208 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_HW_H +#define YHGCH_DRM_HW_H + +/* register definition */ +#define YHGCH_MISC_CTRL 0x4 + +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 + +#define YHGCH_CURRENT_GATE 0x000040 +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 + +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 + +#define YHGCH_MODE0_GATE 0x000044 +#define YHGCH_MODE1_GATE 0x000048 +#define YHGCH_POWER_MODE_CTRL 0x00004C + +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 + +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 + +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 + +//#define YHGCH_CRT_PLL_CTRL 0x000060 + +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 + +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 + +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 + +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 + +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 + +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) +#define YHGCH_PLL_CTRL_N_MASK 0xF00 + +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) +#define YHGCH_PLL_CTRL_M_MASK 0xFF + +#define YHGCH_CRT_DISP_CTL 0x80200 + +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 + +#define YHGCH_CRT_DPMS_ON 0 +#define YHGCH_CRT_DPMS_OFF 3 + +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 + +#define YHGCH_CRTSELECT_CRT 1 + +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 + +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 + +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 + +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 + +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 + +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 + +#define YHGCH_CRT_FB_ADDRESS 0x080204 + +#define YHGCH_CRT_FB_WIDTH 0x080208 +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF + +#define YHGCH_CRT_HORZ_TOTAL 0x08020C +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 + +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF + +#define YHGCH_CRT_HORZ_SYNC 0x080210 +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 + +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF + +#define YHGCH_CRT_VERT_TOTAL 0x080214 +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 + +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF + +#define YHGCH_CRT_VERT_SYNC 0x080218 +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 + +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF + +/* Hardware Cursor */ +#define YHGCH_HWC_ADDRESS 0x080230 +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF + +#define YHGCH_HWC_LOCATION 0x080234 +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF + +#define YHGCH_HWC_COLOR_12 0x080238 +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF + +#define YHGCH_HWC_COLOR_3 0x08023C +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF + +/* Auto Centering */ +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF + +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF + +/* register to control panel output */ +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) + +#define YHGCH_RAW_INTERRUPT 0x80290 +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 + +#define YHGCH_RAW_INTERRUPT_EN 0x80298 +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 + +/* register and values for PLL control */ +#define CRT_PLL1_NS 0x802a8 +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) + +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 + +#define CRT_PLL2_NS 0x802ac +#define CRT_PLL2_NS_25MHZ 0x0 +#define CRT_PLL2_NS_40MHZ 0x0 +#define CRT_PLL2_NS_65MHZ 0x0 +#define CRT_PLL2_NS_83MHZ 0x0 +#define CRT_PLL2_NS_106MHZ 0x0 +#define CRT_PLL2_NS_108MHZ 0x0 +#define CRT_PLL2_NS_146MHZ 0x0 +#define CRT_PLL2_NS_148MHZ 0x0 +#define CRT_PLL2_NS_193MHZ 0x0 + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c new file mode 100644 index 000000000000..2e222af29f69 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/io.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_print.h> +#include <drm/drm_simple_kms_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +static int yhgch_connector_get_modes(struct drm_connector *connector) +{ + int count; + const struct drm_edid *drm_edid; + + drm_edid = drm_edid_read(connector); + if (drm_edid) { + drm_edid_connector_update(connector, drm_edid); + count = drm_edid_connector_add_modes(connector); + if (count) + goto out; + } + + count = drm_add_modes_noedid(connector, + connector->dev->mode_config.max_width, + connector->dev->mode_config.max_height); + drm_set_preferred_mode(connector, 1024, 768); + +out: + drm_edid_free(drm_edid); + return count; +} + +static int yhgch_connector_helper_detect_from_ddc(struct drm_connector *connector, + struct drm_modeset_acquire_ctx *ctx, + bool force) +{ + if (drm_connector_helper_detect_from_ddc(connector, ctx, force) + != connector_status_connected) { + drm_dbg_kms(connector->dev, "ddc detect failed, force connect\n"); + } + return connector_status_connected; +} + +static const struct drm_connector_helper_funcs + yhgch_connector_helper_funcs = { + .get_modes = yhgch_connector_get_modes, + .detect_ctx = yhgch_connector_helper_detect_from_ddc, +}; + +static const struct drm_connector_funcs yhgch_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static void yhgch_encoder_enable(struct drm_encoder *encoder) +{ + u32 reg; + struct drm_device *dev = encoder->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); +} + +static void yhgch_encoder_disable(struct drm_encoder *encoder) +{ + u32 reg = 0, regmask = 0; + struct drm_device *dev = encoder->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); + regmask |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); + regmask |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); + regmask |= YHGCH_DISPLAY_CONTROL_FPEN(1); + regmask |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); + reg &= ~regmask; + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); +} + +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { + .enable = yhgch_encoder_enable, + .disable = yhgch_encoder_disable, +}; + +int yhgch_vdac_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_encoder *encoder = &priv->encoder; + struct drm_crtc *crtc = &priv->crtc; + struct drm_connector *connector = &priv->connector; + struct i2c_adapter *ddc; + int ret; + + ddc = yhgch_ddc_create(priv); + if (IS_ERR(ddc)) { + ret = PTR_ERR(ddc); + drm_err(dev, "failed to create ddc: %d\n", ret); + return ret; + } + + encoder->possible_crtcs = drm_crtc_mask(crtc); + ret = drmm_encoder_init(dev, encoder, NULL, DRM_MODE_ENCODER_DAC, NULL); + if (ret) { + drm_err(dev, "failed to init encoder: %d\n", ret); + return ret; + } + + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); + + ret = drm_connector_init_with_ddc(dev, connector, + &yhgch_connector_funcs, + DRM_MODE_CONNECTOR_VGA, + ddc); + if (ret) { + drm_err(dev, "failed to init connector: %d\n", ret); + return ret; + } + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); + + drm_connector_attach_encoder(connector, encoder); + + return 0; +} -- 2.43.5 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v8 1/1] [DRIVER] gpu: drm: add support for YHGCH ZX1000 soc chipset 2025-09-29 10:48 ` [PATCH v8 1/1] " Chu Guangqing @ 2025-09-29 11:39 ` Jani Nikula 2025-10-14 7:34 ` Re: " Chu Guangqing 2025-10-05 23:06 ` Dmitry Baryshkov 1 sibling, 1 reply; 14+ messages in thread From: Jani Nikula @ 2025-09-29 11:39 UTC (permalink / raw) To: Chu Guangqing, tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: linux-kernel, dri-devel, Chu Guangqing On Mon, 29 Sep 2025, Chu Guangqing <chuguangqing@inspur.com> wrote: > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > new file mode 100644 > index 000000000000..2e222af29f69 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > @@ -0,0 +1,134 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include <linux/io.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_probe_helper.h> > +#include <drm/drm_print.h> > +#include <drm/drm_simple_kms_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +static int yhgch_connector_get_modes(struct drm_connector *connector) > +{ > + int count; > + const struct drm_edid *drm_edid; > + > + drm_edid = drm_edid_read(connector); > + if (drm_edid) { > + drm_edid_connector_update(connector, drm_edid); You're supposed to do drm_edid_connector_update() even for NULL edid to reset it. BR, Jani. > + count = drm_edid_connector_add_modes(connector); > + if (count) > + goto out; > + } > + > + count = drm_add_modes_noedid(connector, > + connector->dev->mode_config.max_width, > + connector->dev->mode_config.max_height); > + drm_set_preferred_mode(connector, 1024, 768); > + > +out: > + drm_edid_free(drm_edid); > + return count; > +} -- Jani Nikula, Intel ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: Re: [PATCH v8 1/1] [DRIVER] gpu: drm: add support for YHGCH ZX1000 soc chipset 2025-09-29 11:39 ` Jani Nikula @ 2025-10-14 7:34 ` Chu Guangqing 0 siblings, 0 replies; 14+ messages in thread From: Chu Guangqing @ 2025-10-14 7:34 UTC (permalink / raw) To: jani.nikula, maarten.lankhorst, mripard, tzimmermann, airlied, simona Cc: linux-kernel, dri-devel, Chu Guangqing Hi Jani, > On Sat, 11 Oct 2025, Chu Guangqing <chuguangqing@inspur.com> wrote: >> Hi Jani, >> >>On Mon, 29 Sep 2025, Chu Guangqing <chuguangqing@inspur.com> wrote: >>>> diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c >>>> new file mode 100644 >>>> index 000000000000..2e222af29f69 >>>> --- /dev/null >>>> +++ b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c >>>> @@ -0,0 +1,134 @@ >>>> +// SPDX-License-Identifier: GPL-2.0 >>>> + >>>> +#include <linux/io.h> >>>> + >>>> +#include <drm/drm_atomic_helper.h> >>>> +#include <drm/drm_edid.h> >>>> +#include <drm/drm_probe_helper.h> >>>> +#include <drm/drm_print.h> >>>> +#include <drm/drm_simple_kms_helper.h> >>>> + >>>> +#include "yhgch_drm_drv.h" >>>> +#include "yhgch_drm_regs.h" >>>> + >>>> +static int yhgch_connector_get_modes(struct drm_connector *connector) >>>> +{ >>>> + int count; >>>> + const struct drm_edid *drm_edid; >>>> + >>>> + drm_edid = drm_edid_read(connector); >>>> + if (drm_edid) { >>>> + drm_edid_connector_update(connector, drm_edid); >>> >>>You're supposed to do drm_edid_connector_update() even for NULL edid to >>>reset it. >>> >>>BR, >>>Jani. >>> >> >> I add an else here to make the call. > >Please follow the same/similar pattern as pretty much everyone else is >doing: > > drm_edid = drm_edid_read(connector); > drm_edid_connector_update(connector, drm_edid); > > if (drm_edid) { > count = drm_edid_connector_add_modes(connector); > drm_edid_free(drm_edid); > } > >BR, >Jani. > The changes have been made; please refer to the link below. https://lore.kernel.org/all/20251014072421.4486-1-chuguangqing@inspur.com/ >> >>>> + count = drm_edid_connector_add_modes(connector); >>>> + if (count) >>>> + goto out; >>>> + } >> >> - } >> + } else >> + drm_edid_connector_update(connector, NULL); >> >>>> + >>>> + count = drm_add_modes_noedid(connector, >>>> + connector->dev->mode_config.max_width, >>>> + connector->dev->mode_config.max_height); >>>> + drm_set_preferred_mode(connector, 1024, 768); >>>> + >>>> +out: >>>> + drm_edid_free(drm_edid); >>>> + return count; >>>> +} >>> >>>-- >>>Jani Nikula, Intel >>> >> >> Best regards >> >> Gary >> > >-- >Jani Nikula, Intel Best regards Chu Guangqing ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v8 1/1] [DRIVER] gpu: drm: add support for YHGCH ZX1000 soc chipset 2025-09-29 10:48 ` [PATCH v8 1/1] " Chu Guangqing 2025-09-29 11:39 ` Jani Nikula @ 2025-10-05 23:06 ` Dmitry Baryshkov 1 sibling, 0 replies; 14+ messages in thread From: Dmitry Baryshkov @ 2025-10-05 23:06 UTC (permalink / raw) To: Chu Guangqing Cc: tzimmermann, maarten.lankhorst, mripard, airlied, simona, linux-kernel, dri-devel On Mon, Sep 29, 2025 at 06:48:31PM +0800, Chu Guangqing wrote: > add support for ZX1000 BMC soc chipset > > The ZX1000 (Z106) chip is a self-developed server management chip of the > "Zhixin Series" by Yunhai Guochuang. It can monitor the operating status of > servers in real time and perform various remote management operations on > servers, including remote system installation, restart, power-on and power-off. > It supports instruction sets of mainstream processor architectures such as X86, > ARM, and LoongArch, with fully open firmware and software interfaces that are > compatible with the third-party application ecosystem. > > Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> > --- > MAINTAINERS | 6 + > drivers/gpu/drm/Kconfig | 2 + > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/yhgch/Kconfig | 11 + > drivers/gpu/drm/yhgch/Makefile | 4 + > drivers/gpu/drm/yhgch/yhgch_drm_de.c | 398 +++++++++++++++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 308 +++++++++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 ++++ > drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ > drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 134 +++++++++ > 11 files changed, 1237 insertions(+) > create mode 100644 drivers/gpu/drm/yhgch/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 520fb4e379a3..8f861858c6e3 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -27781,6 +27781,12 @@ S: Maintained > F: Documentation/input/devices/yealink.rst > F: drivers/input/misc/yealink.* > > +YHGCH DRM DRIVER > +M: Chu Guangqing <chuguangqing@inspur.com> > +S: Maintained > +F: drivers/gpu/drm/yhgch > +W: https://www.yhgch.com > + > Z8530 DRIVER FOR AX.25 > M: Joerg Reuter <jreuter@yaina.de> > L: linux-hams@vger.kernel.org > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > index f7ea8e895c0c..8e0b1d12c81f 100644 > --- a/drivers/gpu/drm/Kconfig > +++ b/drivers/gpu/drm/Kconfig > @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" > > source "drivers/gpu/drm/imagination/Kconfig" > > +source "drivers/gpu/drm/yhgch/Kconfig" > + > config DRM_HYPERV > tristate "DRM Support for Hyper-V synthetic video device" > depends on DRM && PCI && HYPERV > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile > index 4dafbdc8f86a..f344e0173b29 100644 > --- a/drivers/gpu/drm/Makefile > +++ b/drivers/gpu/drm/Makefile > @@ -231,6 +231,7 @@ obj-y += solomon/ > obj-$(CONFIG_DRM_SPRD) += sprd/ > obj-$(CONFIG_DRM_LOONGSON) += loongson/ > obj-$(CONFIG_DRM_POWERVR) += imagination/ > +obj-$(CONFIG_DRM_YHGCH) += yhgch/ > > # Ensure drm headers are self-contained and pass kernel-doc > hdrtest-files := \ > diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig > new file mode 100644 > index 000000000000..887cb66aa305 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Kconfig > @@ -0,0 +1,11 @@ > +config DRM_YHGCH > + tristate "DRM Support for YHGCH BMC" > + depends on DRM && PCI && MMU > + select DRM_CLIENT_SELECTION > + select DRM_KMS_HELPER > + select DRM_GEM_SHMEM_HELPER > + help > + Choose this option if you have a YHGCH ZX1000 chipset. > + If M is selected the module will be called yhgch-drm. > + IF Y is selected the module will be built into the kernel. > + IF N is selected the module will be excluded from the kernel. > diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile > new file mode 100644 > index 000000000000..30de2fd27f18 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Makefile > @@ -0,0 +1,4 @@ > +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o > + > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o > + > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch_drm_de.c > new file mode 100644 > index 000000000000..1a72b5517618 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_de.c > @@ -0,0 +1,398 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <drm/drm_atomic.h> > +#include <drm/drm_gem_atomic_helper.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_gem_shmem_helper.h> > +#include <drm/drm_format_helper.h> > +#include <drm/drm_damage_helper.h> > +#include <drm/drm_fourcc.h> > + > +#include <drm/drm_vblank.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +struct yhgch_dislay_pll_config { > + u64 hdisplay; > + u64 vdisplay; > + u32 pll1_config_value; > + u32 pll2_config_value; > +}; > + > +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { > + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, > + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, > + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, > + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, > + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, > +}; > + > +static int yhgch_plane_atomic_check(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, > + plane); > + struct drm_framebuffer *fb = new_plane_state->fb; > + struct drm_crtc_state *new_crtc_state = NULL; > + > + if (!fb) > + return 0; This can't happen, please drop. > + > + if (new_plane_state->crtc) > + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); > + > + return drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, > + DRM_PLANE_NO_SCALING, > + DRM_PLANE_NO_SCALING, > + false, true); > +} > + > +static void yhgch_handle_damage(void __iomem *addr_base, struct iosys_map *src, > + struct drm_framebuffer *fb, > + struct drm_rect *clip) > +{ > + struct iosys_map dst; > + > + iosys_map_set_vaddr_iomem(&dst, addr_base); > + iosys_map_incr(&dst, drm_fb_clip_offset(fb->pitches[0], fb->format, clip)); > + drm_fb_memcpy(&dst, fb->pitches, src, fb, clip); > +} > + > +static void yhgch_plane_atomic_update(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); > + struct drm_framebuffer *fb = plane_state->fb; > + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); > + struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); > + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); > + struct drm_atomic_helper_damage_iter iter; > + struct drm_rect damage; > + u32 reg; > + s64 gpu_addr = 0; > + u32 line_l; > + > + if (!plane_state->crtc || !plane_state->fb) > + return; > + > + if (!plane_state->visible) > + return; Neither of these can happen, please drop. > + > + drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); > + drm_atomic_for_each_plane_damage(&iter, &damage) { > + yhgch_handle_damage(priv->vram_base, shadow_plane_state->data, fb, &damage); > + } > + > + fb->pitches[0] = (fb->pitches[0] + 15) & ~15; > + > + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); Why are you always writing 0 to YHGCH_CRT_FB_ADDRESS here? > + > + reg = fb->width * fb->format->cpp[0]; > + > + line_l = fb->pitches[0]; > + writel(FIELD_PREP(YHGCH_CRT_FB_WIDTH_WIDTH_MASK, reg) | > + FIELD_PREP(YHGCH_CRT_FB_WIDTH_OFFS_MASK, line_l), > + priv->mmio + YHGCH_CRT_FB_WIDTH); > + > + /* SET PIXEL FORMAT */ > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; > + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, > + fb->format->cpp[0] * 8 / 16); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + [...] > + > +/* > + * It can operate in one of three modes: 0, 1 or Sleep. What do 0 and 1 mean here? > + */ > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) > +{ > + unsigned int control_value = 0; > + void __iomem *mmio = priv->mmio; > + u32 input = 1; > + > + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) > + return; > + > + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) > + input = 0; > + > + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); > + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | > + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); > + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_MODE_MASK, power_mode); > + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_OSC_INPUT_MASK, input); > + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); > +} > + -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v8 0/1] [DRIVER] gpu: drm: add support for YHGCH ZX1000 soc chipset 2025-09-29 10:48 ` [PATCH v8 0/1] [DRIVER] gpu: drm: add support for YHGCH " Chu Guangqing 2025-09-29 10:48 ` [PATCH v8 1/1] " Chu Guangqing @ 2025-10-05 22:56 ` Dmitry Baryshkov 1 sibling, 0 replies; 14+ messages in thread From: Dmitry Baryshkov @ 2025-10-05 22:56 UTC (permalink / raw) To: Chu Guangqing Cc: tzimmermann, maarten.lankhorst, mripard, airlied, simona, linux-kernel, dri-devel On Mon, Sep 29, 2025 at 06:48:30PM +0800, Chu Guangqing wrote: > v8: > - Use YHGCH uniformly and add the company's official website. I think you were several times asked to stop sending new revision as a response to a previous one. -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2025-10-14 7:35 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2025-09-28 5:41 [PATCH v6 0/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset Chu Guangqing 2025-09-28 5:41 ` [PATCH v6 1/1] " Chu Guangqing 2025-09-28 21:43 ` Dmitry Baryshkov 2025-09-29 6:07 ` Chu Guangqing 2025-09-29 6:31 ` [PATCH v7 0/1] " Chu Guangqing 2025-09-29 6:31 ` [PATCH v7 1/1] " Chu Guangqing 2025-09-29 9:07 ` Dmitry Baryshkov 2025-09-29 11:00 ` Chu Guangqing 2025-09-29 10:48 ` [PATCH v8 0/1] [DRIVER] gpu: drm: add support for YHGCH " Chu Guangqing 2025-09-29 10:48 ` [PATCH v8 1/1] " Chu Guangqing 2025-09-29 11:39 ` Jani Nikula 2025-10-14 7:34 ` Re: " Chu Guangqing 2025-10-05 23:06 ` Dmitry Baryshkov 2025-10-05 22:56 ` [PATCH v8 0/1] " Dmitry Baryshkov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®