From: Jon Smirl <jonsmirl@gmail.com>
To: Jason Wessel <jason.wessel@windriver.com>
Cc: gregkh@suse.de, Alan Stern <stern@rowland.harvard.edu>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/5] V2 usb console improvements series
Date: Fri, 19 Mar 2010 07:59:04 -0400 [thread overview]
Message-ID: <9e4733911003190459l570af3cn16530c1ece989e2@mail.gmail.com> (raw)
In-Reply-To: <1268773546-12457-1-git-send-email-jason.wessel@windriver.com>
On Tue, Mar 16, 2010 at 5:05 PM, Jason Wessel
<jason.wessel@windriver.com> wrote:
> I aggregated and ported all usb patches I have previously posted which
> are not mainlined into a single series aimed at providing a stable usb
> console.
Jason, are you aware that the FTDI chips correctly signals the RTS/CTS
lines when it is busy doing USB processing? They work ok ignoring
RTS/CTS up to about 600Kb/s. For higher baud rates you needs to
implement RTS/CTS. My embedded system has a DMA based serial port that
I am running at 2Mb/s. The RTS/CTS handshake works to automatically
flow control the hardware DMA system. If you don't do this the chip
will simply drop the characters.
>
> Greg Kroah-Hartman already picked up the first 2 patches in the
> series, but for completeness they are provided here because one of the
> other patches requires the context changes.
>
> Differences in V2 vs V1 patch set
> * The optimize usb sysrq was dropped entirely
> * Removed the unused export symbol per Alan Stern's comments
> * Updated the definition of usb_poll_irq() per Alan Stern's comments
>
>
> Thanks,
> Jason.
>
>
> -- The recap about synchronous usb serial consoles --
>
> This is picking up where Alan Stern and I left off after a discussion
> in September 2009.
>
> The serial uart code implements the console writes synchronously such
> that you get the data right away and "pay the toll" in terms of system
> performance loss if you do lots of printk's to the console. The usb
> serial console code just eats the data if there is no room left in the
> queue, and you do not see the data until the interrupts are restored.
>
> If we assume the main reason you would use a usb console device is to
> get printk's then every effort should be made to be able to see the
> printk's on the usb console device. In this patch series, two
> conditions must be met before the hcd device would get polled.
>
> 1) The data write is a usb serial console write
> 2) The usb serial driver has set the variable max_in_flight_urbs
>
> Based on Alan's comments about the 1ms minimum response time for the
> hcd device I ended up using a maximum 3ms delay loop. The 3ms was
> selected based on testing the usb_debug device and the ftdi usb rs232
> port. I found the usb_debug device needed the 1ms and the ftdi device
> required slightly more than 2ms in the worst case else there was some
> sporadic data loss.
>
> I also tested incurring the penalty 3ms for each write with the device
> in a "failed" capacity. In that case it introduced a 3ms delay for
> each printk() which only showed any noticeable delay with the "SysRq t"
> packet.
>
> Part of having the console stable requires that usb sysrq handler get
> executed in a tasklet. The hcd device lock is always held while the
> driver call backs are executed. The means you cannot get the sysrq
> printk's out to the usb console device after the in_flight urb queue
> is filled.
>
> Thanks,
> Jason.
>
> ---
>
> The following changes since commit a3d3203e4bb40f253b1541e310dc0f9305be7c84:
> Linus Torvalds (1):
> Merge branch 'release' of git://git.kernel.org/.../lenb/linux-acpi-2.6
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb.git for_gregkh
>
> Jason Wessel (5):
> tty_port,usb-console: Fix usb serial console open/close regression
> usb-serial: Use tty_port version of console instead of the usb_serial_port version
> usb-console: pass baud from console to the initial tty open
> usb-hcd,usb-console: poll hcd device to force usb console writes
> usb-serialy,sysrq: Run the sysrq handler in a tasklet
>
> drivers/char/sysrq.c | 29 ++++++++++++++++
> drivers/char/tty_port.c | 2 +-
> drivers/usb/core/hcd.c | 10 +++++
> drivers/usb/serial/console.c | 70 ++++++++++++++++++++++----------------
> drivers/usb/serial/ftdi_sio.c | 9 +++--
> drivers/usb/serial/generic.c | 6 ++--
> drivers/usb/serial/pl2303.c | 8 +++--
> drivers/usb/serial/usb-serial.c | 4 +-
> drivers/usb/serial/usb_debug.c | 2 +-
> include/linux/sysrq.h | 4 ++
> include/linux/tty.h | 1 +
> include/linux/usb.h | 3 ++
> include/linux/usb/serial.h | 2 -
> 13 files changed, 104 insertions(+), 46 deletions(-)
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Jon Smirl
jonsmirl@gmail.com
prev parent reply other threads:[~2010-03-19 11:59 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-16 21:05 Jason Wessel
2010-03-16 21:05 ` [PATCH 1/5] tty_port,usb-console: Fix usb serial console open/close regression Jason Wessel
2010-03-16 21:05 ` [PATCH 2/5] usb-serial: Use tty_port version of console instead of the usb_serial_port version Jason Wessel
2010-03-16 21:05 ` [PATCH 3/5] usb-console: pass baud from console to the initial tty open Jason Wessel
2010-03-16 21:05 ` [PATCH 4/5] usb-hcd,usb-console: poll hcd device to force usb console writes Jason Wessel
2010-03-16 21:05 ` [PATCH 5/5] usb-serialy,sysrq: Run the sysrq handler in a tasklet Jason Wessel
2010-03-16 21:46 ` [PATCH 4/5] usb-hcd,usb-console: poll hcd device to force usb console writes Greg KH
2010-03-17 9:08 ` Johan Hovold
2010-03-17 14:38 ` Alan Stern
2010-03-16 21:23 ` [PATCH 2/5] usb-serial: Use tty_port version of console instead of the usb_serial_port version Greg KH
2010-03-16 21:34 ` [PATCH 2/5] usb-serial: Use tty_port version of consoleinstead " Jason Wessel
2010-03-16 21:23 ` [PATCH 1/5] tty_port,usb-console: Fix usb serial console open/close regression Greg KH
2010-03-16 21:34 ` [PATCH 1/5] tty_port,usb-console: Fix usb serial consoleopen/close regression Jason Wessel
2010-03-17 14:30 ` [PATCH 0/5] V2 usb console improvements series Alan Stern
2010-03-17 14:46 ` Jason Wessel
2010-03-17 15:34 ` Alan Stern
2010-03-19 11:59 ` Jon Smirl [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9e4733911003190459l570af3cn16530c1ece989e2@mail.gmail.com \
--to=jonsmirl@gmail.com \
--cc=gregkh@suse.de \
--cc=jason.wessel@windriver.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®