[PATCH v2 0/3] arm64: dts: qcom: x1e80100: Describe 3 USB Type-C connectors currently used

[PATCH v2 0/3] arm64: dts: qcom: x1e80100: Describe 3 USB Type-C connectors currently used

[Abel Vesa]

Both QCP and CRD boards using X Elite (x1e80100) make use of 3 USB
Type-C ports (USB1 SS0, SS1, and SS2). Describe the graph for the USB
part of each one of them for now. The DP port will come at a later stage
since there are some muxes/retimers involved, depending on the type of
board.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Changes in v2:
- Rebased on today's -next which already defines parts of the graph in
  SoC file.
- Described the connectors for the CRD, like Konrad suggested.
- Dropped the remote endpoints assignments from board files as they are
  already described in SoC file.
- Re-worded the commit message to talk about the plural w.r.t. DP ports.
- Link to v1: https://lore.kernel.org/r/20240527-x1e80100-dts-pmic-glink-v1-0-7ea5c8eb4d2b@linaro.org

---
Abel Vesa (3):
      arm64: dts: qcom: x1e80100: Add remote endpoints between PHYs and DPs
      arm64: dts: qcom: x1e80100-crd: Add pmic-glink node with all 3 connectors
      arm64: dts: qcom: x1e80100-qcp: Add pmic-glink node with all 3 connectors

 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 122 ++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 119 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/x1e80100.dtsi    |   9 +++
 3 files changed, 250 insertions(+)
---
base-commit: ee78a17615ad0cfdbbc27182b1047cd36c9d4d5f
change-id: 20231214-x1e80100-dts-pmic-glink-65e351579b8b

Best regards,
-- 
Abel Vesa <abel.vesa@linaro.org>

[PATCH v2 1/3] arm64: dts: qcom: x1e80100: Add remote endpoints between PHYs and DPs

[Abel Vesa]

Describe the port/endpoints graph between the USB/DP combo PHYs and their
corresponding DP controllers.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index cf8d8d5b1870..e275a2a04add 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -2567,6 +2567,7 @@ port@2 {
 					reg = <2>;
 
 					usb_1_ss0_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
 					};
 				};
 			};
@@ -2634,6 +2635,7 @@ port@2 {
 					reg = <2>;
 
 					usb_1_ss1_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp1_out>;
 					};
 				};
 			};
@@ -2701,6 +2703,7 @@ port@2 {
 					reg = <2>;
 
 					usb_1_ss2_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp2_out>;
 					};
 				};
 			};
@@ -3993,6 +3996,7 @@ port@1 {
 						reg = <1>;
 
 						mdss_dp0_out: endpoint {
+							remote-endpoint = <&usb_1_ss0_qmpphy_dp_in>;
 						};
 					};
 				};
@@ -4075,6 +4079,7 @@ port@1 {
 						reg = <1>;
 
 						mdss_dp1_out: endpoint {
+							remote-endpoint = <&usb_1_ss1_qmpphy_dp_in>;
 						};
 					};
 				};
@@ -4154,6 +4159,10 @@ mdss_dp2_in: endpoint {
 
 					port@1 {
 						reg = <1>;
+
+						mdss_dp2_out: endpoint {
+							remote-endpoint = <&usb_1_ss2_qmpphy_dp_in>;
+						};
 					};
 				};
 

-- 
2.34.1

[PATCH v2 2/3] arm64: dts: qcom: x1e80100-crd: Add pmic-glink node with all 3 connectors

[Abel Vesa]

Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
for USB only, for now. The DP ports will come at a later stage since
they use retimers.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 122 ++++++++++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index f19d89d3d6e1..d0f28d8547b1 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -49,6 +49,104 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		/* Left-side rear port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side front port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		/* Right-side port */
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		linux,cma {
 			compatible = "shared-dma-pool";
@@ -915,6 +1013,14 @@ &usb_1_ss0_dwc3 {
 	dr_mode = "host";
 };
 
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
 &usb_1_ss1_hsphy {
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l2j_1p2>;
@@ -939,6 +1045,14 @@ &usb_1_ss1_dwc3 {
 	dr_mode = "host";
 };
 
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
 &usb_1_ss2_hsphy {
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l2j_1p2>;
@@ -962,3 +1076,11 @@ &usb_1_ss2 {
 &usb_1_ss2_dwc3 {
 	dr_mode = "host";
 };
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss2_ss_in>;
+};

-- 
2.34.1

[PATCH v2 3/3] arm64: dts: qcom: x1e80100-qcp: Add pmic-glink node with all 3 connectors

[Abel Vesa]

Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
for USB only, for now. The DP ports will come at a later stage since
they use muxes.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 119 ++++++++++++++++++++++++++++++
 1 file changed, 119 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index a8d0f743228a..e021af54e643 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -23,6 +23,101 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		linux,cma {
 			compatible = "shared-dma-pool";
@@ -611,6 +706,14 @@ &usb_1_ss0_dwc3 {
 	dr_mode = "host";
 };
 
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
 &usb_1_ss1_hsphy {
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l2j_1p2>;
@@ -635,6 +738,14 @@ &usb_1_ss1_dwc3 {
 	dr_mode = "host";
 };
 
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
 &usb_1_ss2_hsphy {
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l2j_1p2>;
@@ -658,3 +769,11 @@ &usb_1_ss2 {
 &usb_1_ss2_dwc3 {
 	dr_mode = "host";
 };
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss2_ss_in>;
+};

-- 
2.34.1

Re: [PATCH v2 2/3] arm64: dts: qcom: x1e80100-crd: Add pmic-glink node with all 3 connectors

[Konrad Dybcio]

On 6.06.2024 12:41 PM, Abel Vesa wrote:
> Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
> for USB only, for now. The DP ports will come at a later stage since
> they use retimers.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

Re: [PATCH v2 3/3] arm64: dts: qcom: x1e80100-qcp: Add pmic-glink node with all 3 connectors

[Konrad Dybcio]

On 6.06.2024 12:41 PM, Abel Vesa wrote:
> Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
> for USB only, for now. The DP ports will come at a later stage since
> they use muxes.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

Re: [PATCH v2 1/3] arm64: dts: qcom: x1e80100: Add remote endpoints between PHYs and DPs

[Konrad Dybcio]

On 6.06.2024 12:41 PM, Abel Vesa wrote:
> Describe the port/endpoints graph between the USB/DP combo PHYs and their
> corresponding DP controllers.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

Re: [PATCH v2 1/3] arm64: dts: qcom: x1e80100: Add remote endpoints between PHYs and DPs

[Dmitry Baryshkov]

On Thu, Jun 06, 2024 at 01:41:52PM +0300, Abel Vesa wrote:
> Describe the port/endpoints graph between the USB/DP combo PHYs and their
> corresponding DP controllers.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/x1e80100.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


-- 
With best wishes
Dmitry

Re: [PATCH v2 2/3] arm64: dts: qcom: x1e80100-crd: Add pmic-glink node with all 3 connectors

[Dmitry Baryshkov]

On Thu, Jun 06, 2024 at 01:41:53PM +0300, Abel Vesa wrote:
> Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
> for USB only, for now. The DP ports will come at a later stage since
> they use retimers.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 122 ++++++++++++++++++++++++++++++
>  1 file changed, 122 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


-- 
With best wishes
Dmitry

Re: [PATCH v2 3/3] arm64: dts: qcom: x1e80100-qcp: Add pmic-glink node with all 3 connectors

[Dmitry Baryshkov]

On Thu, Jun 06, 2024 at 01:41:54PM +0300, Abel Vesa wrote:
> Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
> for USB only, for now. The DP ports will come at a later stage since
> they use muxes.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 119 ++++++++++++++++++++++++++++++
>  1 file changed, 119 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH v2 0/3] arm64: dts: qcom: x1e80100: Describe 3 USB Type-C connectors currently used

[Bjorn Andersson]

On Thu, 06 Jun 2024 13:41:51 +0300, Abel Vesa wrote:
> Both QCP and CRD boards using X Elite (x1e80100) make use of 3 USB
> Type-C ports (USB1 SS0, SS1, and SS2). Describe the graph for the USB
> part of each one of them for now. The DP port will come at a later stage
> since there are some muxes/retimers involved, depending on the type of
> board.
> 
> 
> [...]

Applied, thanks!

[1/3] arm64: dts: qcom: x1e80100: Add remote endpoints between PHYs and DPs
      commit: aa48a8a5d642b5806a7bdae52457c87fee3118f8
[2/3] arm64: dts: qcom: x1e80100-crd: Add pmic-glink node with all 3 connectors
      commit: 24b7616a1cd3eeefa91417afc1467981c4cbaf61
[3/3] arm64: dts: qcom: x1e80100-qcp: Add pmic-glink node with all 3 connectors
      commit: 830a24be7dc1711c4e5be82cb319b575af7760f8

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>