From: Mario Limonciello <mario.limonciello@amd.com>
To: Arnd Bergmann <arnd@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Peter Ujfalusi <peter.ujfalusi@linux.intel.com>,
Bard Liao <yung-chuan.liao@linux.intel.com>,
Daniel Baluta <daniel.baluta@nxp.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
Kai Vehmanen <kai.vehmanen@linux.intel.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>,
sound-open-firmware@alsa-project.org,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
"Rafael J. Wysocki" <rafael@kernel.org>
Subject: Re: [PATCH] ASoC: SOF: amd: fix building without CONFIG_ACPI
Date: Fri, 25 Sep 2026 08:32:21 -0500 [thread overview]
Message-ID: <9f8e5988-ca08-44a6-b047-f5aaa133da41@amd.com> (raw)
In-Reply-To: <20260925131104.118993-1-arnd@kernel.org>
On 9/25/26 08:10, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> When ACPI is disabled, this driver runs into a build failure:
>
> sound/soc/sof/amd/acp.c:1374:13: error: call to undeclared function 'acpi_find_child_device'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
> 1374 | pdm_dev = acpi_find_child_device(adev, ACP7X_DMIC_ADDR, 0);
>
> The code block is already guarded by an 'if (adev)' check that
> can only be true if ACPI is enabled, so add another #ifdef
> to match this.
>
> Fixes: 203ea76c4b0a ("ASoC: SOF: amd: add ACP7.B/7.F PDM controller scan and pdata propagation")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> I also tried adding ACPI Kconfig dependencies, but that quickly
> got out of hand since the acp module is selected by a number of
> drivers that then all need the same dependency.
>
> It may be possible to work around this in the ACPI code by adding
> a stub macro for acpi_find_child_device() that does nothing.
I reproduced the issue as you reported. The stub approach seems to work
too. I've posted that option here for Mark and Rafael to weigh out,
thanks for the idea.
https://lore.kernel.org/linux-acpi/20260925132031.4073551-1-mario.limonciello@amd.com/
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> sound/soc/sof/amd/acp.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/sof/amd/acp.c b/sound/soc/sof/amd/acp.c
> index b059039c9e0d..4b2d7cb244c9 100644
> --- a/sound/soc/sof/amd/acp.c
> +++ b/sound/soc/sof/amd/acp.c
> @@ -1059,6 +1059,7 @@ int amd_sof_acp_resume(struct snd_sof_dev *sdev)
> }
> EXPORT_SYMBOL_NS(amd_sof_acp_resume, "SND_SOC_SOF_AMD_COMMON");
>
> +#ifdef CONFIG_ACPI
> static void acp_sof_scan_pdm_devices(struct snd_sof_dev *sdev,
> struct acpi_device *pdm_dev)
> {
> @@ -1083,6 +1084,7 @@ static void acp_sof_scan_pdm_devices(struct snd_sof_dev *sdev,
> }
> fwnode_handle_put(child);
> }
> +#endif
>
> #if IS_ENABLED(CONFIG_SND_SOC_SOF_AMD_SOUNDWIRE)
> static int acp_sof_scan_sdw_devices(struct snd_sof_dev *sdev, u64 addr)
> @@ -1299,9 +1301,7 @@ int amd_sof_acp7x_probe(struct snd_sof_dev *sdev)
> struct pci_dev *pci = to_pci_dev(sdev->dev);
> struct acp_dev_data *adata;
> const struct sof_amd_acp_desc *chip;
> - const union acpi_object *obj;
> struct acpi_device *adev;
> - struct acpi_device *pdm_dev;
> unsigned int addr;
> unsigned int irqflags;
> int ret;
> @@ -1369,7 +1369,11 @@ int amd_sof_acp7x_probe(struct snd_sof_dev *sdev)
> adata->is_sdw_dev = true;
>
> skip_soundwire:
> +#ifdef CONFIG_ACPI
> if (adev) {
> + struct acpi_device *pdm_dev;
> + const union acpi_object *obj;
> +
> /* DMIC ACPI child address is 2 on ACP7x platforms */
> pdm_dev = acpi_find_child_device(adev, ACP7X_DMIC_ADDR, 0);
> if (pdm_dev)
> @@ -1379,6 +1383,7 @@ int amd_sof_acp7x_probe(struct snd_sof_dev *sdev)
> ACPI_TYPE_INTEGER, &obj))
> adata->acp_sof_signed_firmware_image = obj->integer.value;
> }
> +#endif
>
> sdev->dsp_box.offset = 0;
> sdev->dsp_box.size = BOX_SIZE_512;
next prev parent reply other threads:[~2026-09-25 13:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-25 13:10 Arnd Bergmann
2026-09-25 13:32 ` Mario Limonciello [this message]
2026-09-25 16:37 ` Mukunda,Vijendar
2026-09-25 18:10 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9f8e5988-ca08-44a6-b047-f5aaa133da41@amd.com \
--to=mario.limonciello@amd.com \
--cc=Vijendar.Mukunda@amd.com \
--cc=arnd@arndb.de \
--cc=arnd@kernel.org \
--cc=broonie@kernel.org \
--cc=daniel.baluta@nxp.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.dev \
--cc=rafael@kernel.org \
--cc=sound-open-firmware@alsa-project.org \
--cc=tiwai@suse.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®