mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Bharat Kumar Gogada <bharatku@xilinx.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	Michal Simek <michals@xilinx.com>
Subject: RE: [PATCH v2 2/2] PCI: xilinx-cpm: Add support for Versal CPM5 Root Port
Date: Thu, 3 Mar 2022 09:25:49 +0000	[thread overview]
Message-ID: <BY5PR02MB6947106331FBE73A7B04434DA5049@BY5PR02MB6947.namprd02.prod.outlook.com> (raw)
In-Reply-To: <Yh+OUvLi56/H4l2z@lpieralisi>

> On Tue, Feb 15, 2022 at 06:16:06PM +0530, Bharat Kumar Gogada wrote:
> > Xilinx Versal Premium series has CPM5 block which supports Root Port
> > functioning at Gen5 speed.
> >
> > Xilinx Versal CPM5 has few changes with existing CPM block.
> > - CPM5 has dedicated register space for control and status registers.
> > - CPM5 legacy interrupt handling needs additional register bit
> >   to enable and handle legacy interrupts.
> >
> > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
> > ---
> >  drivers/pci/controller/pcie-xilinx-cpm.c | 33
> > +++++++++++++++++++++++-
> >  1 file changed, 32 insertions(+), 1 deletion(-)
> 
> Only a couple of very minor suggestions below.
> 
> > diff --git a/drivers/pci/controller/pcie-xilinx-cpm.c
> > b/drivers/pci/controller/pcie-xilinx-cpm.c
> > index c7cd44ed4dfc..eb69f494571a 100644
> > --- a/drivers/pci/controller/pcie-xilinx-cpm.c
> > +++ b/drivers/pci/controller/pcie-xilinx-cpm.c
> > @@ -35,6 +35,10 @@
> >  #define XILINX_CPM_PCIE_MISC_IR_ENABLE	0x00000348
> >  #define XILINX_CPM_PCIE_MISC_IR_LOCAL	BIT(1)
> >
> > +#define XILINX_CPM_PCIE_IR_STATUS       0x000002A0
> > +#define XILINX_CPM_PCIE_IR_ENABLE       0x000002A8
> > +#define XILINX_CPM_PCIE_IR_LOCAL        BIT(0)
> > +
> >  /* Interrupt registers definitions */
> >  #define XILINX_CPM_PCIE_INTR_LINK_DOWN		0
> >  #define XILINX_CPM_PCIE_INTR_HOT_RESET		3
> > @@ -109,6 +113,7 @@
> >   * @intx_irq: legacy interrupt number
> >   * @irq: Error interrupt number
> >   * @lock: lock protecting shared register access
> > + * @is_cpm5: value to check cpm version
> >   */
> >  struct xilinx_cpm_pcie {
> >  	struct device			*dev;
> > @@ -120,6 +125,7 @@ struct xilinx_cpm_pcie {
> >  	int				intx_irq;
> >  	int				irq;
> >  	raw_spinlock_t			lock;
> > +	bool                            is_cpm5;
> >  };
> >
> >  static u32 pcie_read(struct xilinx_cpm_pcie *port, u32 reg) @@ -285,6
> > +291,14 @@ static void xilinx_cpm_pcie_event_flow(struct irq_desc *desc)
> >  		generic_handle_domain_irq(port->cpm_domain, i);
> >  	pcie_write(port, val, XILINX_CPM_PCIE_REG_IDR);
> >
> > +	if (port->is_cpm5) {
> > +		val = readl_relaxed(port->cpm_base +
> XILINX_CPM_PCIE_IR_STATUS);
> > +		if (val)
> > +			writel_relaxed(val,
> > +				       port->cpm_base +
> > +				       XILINX_CPM_PCIE_IR_STATUS);
> > +	}
> > +
> >  	/*
> >  	 * XILINX_CPM_PCIE_MISC_IR_STATUS register is mapped to
> >  	 * CPM SLCR block.
> > @@ -484,6 +498,12 @@ static void xilinx_cpm_pcie_init_port(struct
> xilinx_cpm_pcie *port)
> >  	 */
> >  	writel(XILINX_CPM_PCIE_MISC_IR_LOCAL,
> >  	       port->cpm_base + XILINX_CPM_PCIE_MISC_IR_ENABLE);
> > +
> > +	if (port->is_cpm5) {
> > +		writel(XILINX_CPM_PCIE_IR_LOCAL,
> > +		       port->cpm_base + XILINX_CPM_PCIE_IR_ENABLE);
> > +	}
> > +
> >  	/* Enable the Bridge enable bit */
> >  	pcie_write(port, pcie_read(port, XILINX_CPM_PCIE_REG_RPSC) |
> >  		   XILINX_CPM_PCIE_REG_RPSC_BEN,
> > @@ -504,6 +524,9 @@ static int xilinx_cpm_pcie_parse_dt(struct
> xilinx_cpm_pcie *port,
> >  	struct platform_device *pdev = to_platform_device(dev);
> >  	struct resource *res;
> >
> > +	if (of_device_is_compatible(dev->of_node, "xlnx,versal-cpm5-host-
> 1.00"))
> > +		port->is_cpm5 = true;
> 
> port->is_cpm5 = of_device_is_compatible(dev->of_node,
> 					"xlnx,versal-cpm5-host-1.00");
> 
> ?
> 
> > +		port->is_cpm5 = true;
> > +
> >  	port->cpm_base = devm_platform_ioremap_resource_byname(pdev,
> >  							       "cpm_slcr");
> >  	if (IS_ERR(port->cpm_base))
> > @@ -518,7 +541,14 @@ static int xilinx_cpm_pcie_parse_dt(struct
> xilinx_cpm_pcie *port,
> >  	if (IS_ERR(port->cfg))
> >  		return PTR_ERR(port->cfg);
> >
> > -	port->reg_base = port->cfg->win;
> > +	if (!port->is_cpm5) {
> 
> Nit: I'd keep the check as above for consistency but it is not really
> important:
Thanks Lorenzo, will fix these in next patch.

  reply	other threads:[~2022-03-03  9:26 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-15 12:46 [PATCH v2 0/2] Add support for Xilinx " Bharat Kumar Gogada
2022-02-15 12:46 ` [PATCH v2 1/2] dt-bindings: PCI: xilinx-cpm: Add " Bharat Kumar Gogada
2022-03-02 15:37   ` Lorenzo Pieralisi
2022-03-03  4:36     ` Bharat Kumar Gogada
2022-02-15 12:46 ` [PATCH v2 2/2] PCI: xilinx-cpm: Add support for " Bharat Kumar Gogada
2022-03-02 15:33   ` Lorenzo Pieralisi
2022-03-03  9:25     ` Bharat Kumar Gogada [this message]
2022-03-02  9:37 ` [PATCH v2 0/2] Add support for Xilinx " Bharat Kumar Gogada

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BY5PR02MB6947106331FBE73A7B04434DA5049@BY5PR02MB6947.namprd02.prod.outlook.com \
    --to=bharatku@xilinx.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=michals@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®