From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: Christophe KERELLO <christophe.kerello@foss.st.com>
Cc: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
michael@amarulasolutions.com,
linux-amarula@amarulasolutions.com,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [Linux-stm32] [PATCH 1/2] arm64: dts: st: enable eMMC on stm32mp257f-ev1
Date: Tue, 17 Nov 2026 18:21:08 +0100 [thread overview]
Message-ID: <CABGWkvrnq7Z-nO2LoJw1M833Mqbabn6M_r+okrJ4R-eQ-sR_SQ@mail.gmail.com> (raw)
In-Reply-To: <c936336b-04b1-4860-9eba-4d1ab002adff@foss.st.com>
Hello Christophe,
On Tue, Nov 17, 2026 at 5:58 PM Christophe KERELLO
<christophe.kerello@foss.st.com> wrote:
>
> Hello Dario,
>
> On 11/15/26 17:34, Dario Binacchi wrote:
> > Enable the eMMC connected to SDMMC2 with an 8-bit bus on the
> > STM32MP257F-EV1. VDDIO2 is tied to the 1.8 V rail on this board, so
> > the DDR52 and HS200 modes are enabled. Tested in HS200 mode at 100 MHz.
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > ---
> >
> > arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 17 +++++++++++++++++
> > 1 file changed, 17 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
> > index 782b4bb843ee..9c38c4fe0c1f 100644
> > --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
> > +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
> > @@ -431,6 +431,23 @@ &sdmmc1 {
> > status = "okay";
> > };
> >
> > +&sdmmc2 {
> > + pinctrl-names = "default", "opendrain", "sleep";
> > + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
> > + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
> > + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
> > + non-removable;
> > + no-sd;
> > + no-sdio;
> > + st,neg-edge;
> > + bus-width = <8>;
> > + mmc-ddr-1_8v;
> > + mmc-hs200-1_8v;
> > + vmmc-supply = <&scmi_vdd_emmc>;
> > + vqmmc-supply = <&scmi_vddio2>;
> > + status = "okay";
> > +};
>
> This source code appears to come from ST's downstream Linux tree. When
> upstreaming from that tree,
> please preserve ST author and Signed-off-by tags.
I started from nodes already in mainline:
c5ce8d7bcc78 ("arm64: dts: st: support Engicam MicroGEA-STM32MP257 SoM")
94911ce62b45 ("arm64: dts: st: enable eMMC on stm32mp257f-dk")
and only adapted the pin groups and supplies to the EV1. The first
one is mine, as are the SDMMC2 controller node and the pin groups
this patch relies on:
513410ae43bc ("arm64: dts: st: add SDMMC2 support on stm32mp25")
17d813da1689 ("arm64: dts: st: add sdmmc2 pins for stm32mp25")
Given the hardware, I don't think there is much room for it to look different.
Thanks and regards,
Dario
> https://github.com/STMicroelectronics/linux/commit/d00ddc95c630ebf948ebe9c22fcbca145d771afc
>
> Regards,
> Christophe Kerello.
>
> > +
> > &spi3 {
> > pinctrl-names = "default", "sleep";
> > pinctrl-0 = <&spi3_pins_a>;
> > ---
> > base-commit: 23c62304dde29abe92013d85910d03a77dada35d
> > branch: stm32mp257f-ev1-emmc-aliases
> >
>
--
Dario Binacchi
Senior Embedded Software Engineer
M. +39 328 0625246
dario.binacchi@amarulasolutions.com
―――――――――――――――
Amarula Solutions SRL
Via Felice Cavallotti 25D, 41012 Carpi, MO, IT
info@amarulasolutions.com
www.amarulasolutions.com
prev parent reply other threads:[~2026-11-17 17:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-15 16:34 Dario Binacchi
2026-11-15 16:34 ` [PATCH 2/2] arm64: dts: st: add mmc aliases " Dario Binacchi
2026-11-17 16:58 ` [Linux-stm32] [PATCH 1/2] arm64: dts: st: enable eMMC " Christophe KERELLO
2026-11-17 17:21 ` Dario Binacchi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CABGWkvrnq7Z-nO2LoJw1M833Mqbabn6M_r+okrJ4R-eQ-sR_SQ@mail.gmail.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=christophe.kerello@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=michael@amarulasolutions.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®