From: Christophe KERELLO <christophe.kerello@foss.st.com>
To: Dario Binacchi <dario.binacchi@amarulasolutions.com>,
<linux-kernel@vger.kernel.org>
Cc: Rob Herring <robh@kernel.org>, Conor Dooley <conor+dt@kernel.org>,
<devicetree@vger.kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
<michael@amarulasolutions.com>,
<linux-amarula@amarulasolutions.com>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [Linux-stm32] [PATCH 1/2] arm64: dts: st: enable eMMC on stm32mp257f-ev1
Date: Tue, 17 Nov 2026 17:58:02 +0100 [thread overview]
Message-ID: <c936336b-04b1-4860-9eba-4d1ab002adff@foss.st.com> (raw)
In-Reply-To: <20261115163432.2601947-1-dario.binacchi@amarulasolutions.com>
Hello Dario,
On 11/15/26 17:34, Dario Binacchi wrote:
> Enable the eMMC connected to SDMMC2 with an 8-bit bus on the
> STM32MP257F-EV1. VDDIO2 is tied to the 1.8 V rail on this board, so
> the DDR52 and HS200 modes are enabled. Tested in HS200 mode at 100 MHz.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> ---
>
> arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
> index 782b4bb843ee..9c38c4fe0c1f 100644
> --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
> +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
> @@ -431,6 +431,23 @@ &sdmmc1 {
> status = "okay";
> };
>
> +&sdmmc2 {
> + pinctrl-names = "default", "opendrain", "sleep";
> + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
> + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
> + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
> + non-removable;
> + no-sd;
> + no-sdio;
> + st,neg-edge;
> + bus-width = <8>;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> + vmmc-supply = <&scmi_vdd_emmc>;
> + vqmmc-supply = <&scmi_vddio2>;
> + status = "okay";
> +};
This source code appears to come from ST's downstream Linux tree. When
upstreaming from that tree,
please preserve ST author and Signed-off-by tags.
https://github.com/STMicroelectronics/linux/commit/d00ddc95c630ebf948ebe9c22fcbca145d771afc
Regards,
Christophe Kerello.
> +
> &spi3 {
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&spi3_pins_a>;
> ---
> base-commit: 23c62304dde29abe92013d85910d03a77dada35d
> branch: stm32mp257f-ev1-emmc-aliases
>
next prev parent reply other threads:[~2026-11-17 16:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-15 16:34 Dario Binacchi
2026-11-15 16:34 ` [PATCH 2/2] arm64: dts: st: add mmc aliases " Dario Binacchi
2026-11-17 16:58 ` Christophe KERELLO [this message]
2026-11-17 17:21 ` [Linux-stm32] [PATCH 1/2] arm64: dts: st: enable eMMC " Dario Binacchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c936336b-04b1-4860-9eba-4d1ab002adff@foss.st.com \
--to=christophe.kerello@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=dario.binacchi@amarulasolutions.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=michael@amarulasolutions.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®