mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform
@ 2026-03-24 11:43 Biju
  2026-03-24 11:43 ` [PATCH v8 01/11] dt-bindings: clock: Document RZ/G3L SoC Biju
                   ` (10 more replies)
  0 siblings, 11 replies; 25+ messages in thread
From: Biju @ 2026-03-24 11:43 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Jiri Slaby, Michael Turquette, Stephen Boyd,
	Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Geert Uytterhoeven, Magnus Damm
  Cc: Biju Das, linux-kernel, linux-serial, devicetree, linux-clk,
	linux-renesas-soc, Prabhakar Mahadev Lad, Biju Das

From: Biju Das <biju.das.jz@bp.renesas.com>

Hi all,

This patch series adds initial support for the Renesas RZ/G3L SoC and
RZ/G3L SMARC EVK platform. The RZ/G3L device is a general-purpose
microprocessor with a quad-core CA-55, single core CM-33, Mali-G31
3-D Graphics and other peripherals.

Support for the below list of blocks is added in the SoC DTSI (r9a08g046.dtsi):

 - EXT CLK
 - 4X CA55
 - SCIF
 - CPG
 - GIC
 - ARMv8 Timer

This series also adds SCIF support for the RZ/G3L SMARC EVK board (r9a08g046l48-smarc.dts).

v7->v8:
 * Added logs for MSTOP state during suspend/resume cycle of s2idle.
 * Fixed the R9A08G046_ADC1_ADCLK macro value 138->139.
 * Added helper for mod clock enable/disable to allow callers to control
   whether the module stop state is updated alongside the clock
   enable/disable operation.
 * Fit the comments in rzg2l_mod_clock_init_mstop_helper() to 80 character
   space.
 * Updated comment in rzg2l_mod_clock_init_mstop_helper() as resume()
   calls this function.
 * To avoid setting module state twice and also not to update the initial
   mstop state for the critical clocks state during probe, replaced
   rzg2l_mod_clock_endisable()->rzg2l_mod_clock_endisable_helper().
 * Fixed the typo RZ/G3E->RZ/G3L in r9a08g046l48.dtsi
v6->v7:
 * Collected tag
 * Updated r9a07g043_cpg_info by inserting a blank line before
  .has_clk_mon_regs
 * Replaced r9a07g044_critical_resets->r9a07g044_crit_resets,
   r9a08g045_critical_resets->r9a08g045_crit_resets and
   r9a08g046_critical_resets->r9a08g046_crit_resets for consistency
 * RZ/V2M has critical clocks but no mstop, so move the mstop check after
   enabling critical clocks. After this, we need to restore only mstop for
   module clocks, so remove the inverted logic and continue statement and
   directly call rzg2l_mod_clock_init_mstop_helper() if the clock has
   mstop.
v5->v6:
 * Collected tags
 * Moved loop variable declaration inside for loops in
   __rzg2l_cpg_assert() and rzg2l_cpg_deassert_crit_resets()
 * Replaced r9a07g043_critical_resets[] -> r9a07g043_crit_resets[] for
   consistency
 * Introduced rzg2l_mod_clock_init_mstop_helper() for code reuse
   in probe() and resume().
 * Dropped the list implementation.
 * Replaced  rzg2l_mod_clock_init_mstop->rzg2l_mod_enable_crit_clock_init_mstop()
   for enabling critical clks and restoring mstop state during resume.
 * Dropped dma-ranges, bus-range and comment from the pcie device node
v4->v5:
 * Rebased to next-20260317.
v3->v4:
 * Dropped SoC identification patches as it is accepted for renesas-devel.
 * Updated commit description related to core clocks section in the
    hardware manual
 * Dropped CLK_P4_DIV2 from core clocks
 * Added MIPI_DSI_PLLCLK and USB_SCLK to core clocks
 * Dropped LVDS_PCLK  module clock
 * Added BSC_X_PRESET_BSC reset
 * Moved the patch series from [1] to here as it is boot-dependent.
 * Updated commit description
 * Updated LAST_DT_CORE_CLK with R9A08G046_USB_SCLK
 * Fixed typo 2->8 in dtable_4_128[].
 * Added critical reset table r9a08g046_critical_resets[]
 * Updated num_resets
 * Added crit_resets and num_crit_resets to r9a08g046_cpg_info.
 * Fixed typo R0A08G046L->R9A08G046L in commit description
 * Dropped R9A08G046L46 from commit description
 * Dropped unused audio_clk{1,2} andcan_clk device nodes
 * Reordered i2c device node and updated reg entries by using lower-case
   hexadecimal number
 * Added placeholder in pinctrl node
 * Dropped unused DMAC device node
 * Added pcie node with placeholder
 * Collected the tags.
 * Updated commit description for patch#8

[1] https://lore.kernel.org/all/20260306134228.871815-1-biju.das.jz@bp.renesas.com/
v2->v3:
 * Added macros R9A08G046_ETH{0,1}_CLK_{TX,RX}_I_RMII in r9a08g046-cpg.h.
 * Keep the tag from Conor as it is trivial change for just adding macros.
v1->v2:
 * Dropped scif bindings patch as it is accepted.
 * Collected tags.
 * Squashed the patch#3 and #4
 * Documented GE3D/VCP for all SoC variants
 * Documented external ethernet clocks as it is a clock source for MUX
   inside CPG
 * Updated commit description for bindings.
 * Keep the tag from Conor as it is trivial change for adding more
   clks.
 * Added CLK_ETH{0,1}_TXC_TX_CLK_IN and CLK_ETH{0,1}_RXC_RX_CLK_IN clocks
   in clk table.
 * Dropped R9A08G046_IA55_PCLK from critical clock list.
 * Added external clocks eth{0,1}_txc_tx_clk and eth{0,1}_rxc_rx_clk
   in soc dtsi as it needed for cpg as it is a clock source for mux.
 * Updated cpg node.
 * Dropped gpio.h header from SoM dtsi.
 * Dropped scif node as it is already included in common platform
   file.

Test logs:
/ #  uname -r
7.0.0-rc5-next-20260323-g862cf6e2b2bf
/ # cat /sys/kernel/debug/mstop
                           MSTOP
                     clk   -------------------------
clk_name             cnt   cnt   off   val    shared
--------             ----- ----- ----- ------ ------
gic_gicclk           1     1     0xb6c 0x0
ia55_clk             1     1     0xb70 0x0    ia55_pclk ia55_clk
ia55_pclk            0     1     0xb70 0x0    ia55_pclk ia55_clk
dmac_aclk            1     1     0xb80 0x0
dmac_pclk            0     0     0xb80 0x8
scif0_clk_pck        2     1     0xb68 0x0
/ # echo enabled > /sys/class/tty/ttySC3/power/wakeup
/ # echo N > /sys/module/printk/parameters/console_suspend
/ # echo 7 > /proc/sys/kernel/printk
/ # echo freeze > /sys/power/state
[   66.381552] PM: suspend entry (s2idle)
[   66.385460] Filesystems sync: 0.000 seconds
[   66.390461] Freezing user space processes
[   66.394563] Freezing user space processes completed (elapsed 0.000 seconds)
[   66.401515] OOM killer disabled.
[   66.404731] Freezing remaining freezable tasks
[   66.410340] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[   72.270183] OOM killer enabled.
[   72.273365] Restarting tasks: Starting
[   72.277266] Restarting tasks: Done
[   72.280780] PM: suspend exit
 jfdngdf/ #
/ # cat /sys/kernel/debug/mstop
                           MSTOP
                     clk   -------------------------
clk_name             cnt   cnt   off   val    shared
--------             ----- ----- ----- ------ ------
gic_gicclk           1     1     0xb6c 0x0
ia55_clk             1     1     0xb70 0x0    ia55_pclk ia55_clk
ia55_pclk            0     1     0xb70 0x0    ia55_pclk ia55_clk
dmac_aclk            1     1     0xb80 0x0
dmac_pclk            0     0     0xb80 0x8
scif0_clk_pck        2     1     0xb68 0x0
/ #

/ # cat /proc/cpuinfo
processor       : 0
BogoMIPS        : 48.00
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x2
CPU part        : 0xd05
CPU revision    : 0

processor       : 1
BogoMIPS        : 48.00
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x2
CPU part        : 0xd05
CPU revision    : 0

processor       : 2
BogoMIPS        : 48.00
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x2
CPU part        : 0xd05
CPU revision    : 0

processor       : 3
BogoMIPS        : 48.00
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x2
CPU part        : 0xd05
CPU revision    : 0

/ # cat /proc/interrupts
           CPU0       CPU1       CPU2       CPU3
 11:        104        191        429         62    GICv3  27 Level     arch_timer
 14:          0          0          0          0    GICv3 418 Level     100ac000.serial:rx err
 15:          4          0          0          0    GICv3 420 Level     100ac000.serial:rx full
 16:        229          0          0          0    GICv3 421 Level     100ac000.serial:tx empty
 17:          0          0          0          0    GICv3 419 Level     100ac000.serial:break
 18:         17          0          0          0    GICv3 422 Level     100ac000.serial:rx ready
IPI0:         3         16         13         21       Rescheduling interrupts
IPI1:       315        240        180        217       Function call interrupts
IPI2:         0          0          0          0       CPU stop interrupts
IPI3:         0          0          0          0       CPU stop NMIs
IPI4:         0          0          0          0       Timer broadcast interrupts
IPI5:         0          0          0          0       IRQ work interrupts
IPI6:         0          0          0          0       CPU backtrace interrupts
IPI7:         0          0          0          0       KGDB roundup interrupts
Err:          0
/ # cat /proc/meminfo
MemTotal:        1887304 kB
MemFree:         1852164 kB
MemAvailable:    1819524 kB
/ # cat /sys/devices/soc0/family
RZ/G3L
/ # cat /sys/devices/soc0/machine
Renesas SMARC EVK version 2 based on r9a08g046l48
/ # cat /sys/devices/soc0/soc_id
r9a08g046
/ # cat /sys/devices/soc0/revision
0
dmesg | grep r9a
[    0.000000] Machine model: Renesas SMARC EVK version 2 based on r9a08g046l48
[    0.066480] renesas-rz-sysc 11020000.system-controller: Detected Renesas RZ/G3L r9a08g046 Rev 0

Biju Das (11):
  dt-bindings: clock: Document RZ/G3L SoC
  clk: renesas: rzg2l-cpg: Add support for critical resets
  clk: renesas: r9a07g04{3,4}/r9a08g045-cpg: Add critical reset entries
  clk: renesas: rzg2l-cpg: Add helper for mod clock enable/disable
  clk: renesas: rzg2l-cpg: Add rzg2l_mod_clock_init_mstop_helper()
  clk: renesas: rzg2l-cpg: Re-enable critical module clocks during
    resume
  clk: renesas: Add support for RZ/G3L SoC
  arm64: dts: renesas: Add initial DTSI for RZ/G3L SoC
  arm64: dts: renesas: Add initial support for RZ/G3L SMARC SoM
  arm64: dts: renesas: renesas-smarc2: Move usb3 nodes to board DTS
  arm64: dts: renesas: Add initial device tree for RZ/G3L SMARC EVK
    board

 .../bindings/clock/renesas,rzg2l-cpg.yaml     |  40 +-
 arch/arm64/boot/dts/renesas/Makefile          |   2 +
 arch/arm64/boot/dts/renesas/r9a08g046.dtsi    | 212 +++++++++++
 .../boot/dts/renesas/r9a08g046l48-smarc.dts   |  37 ++
 arch/arm64/boot/dts/renesas/r9a08g046l48.dtsi |  13 +
 .../boot/dts/renesas/r9a09g047e57-smarc.dts   |   6 +
 .../boot/dts/renesas/renesas-smarc2.dtsi      |   8 -
 .../boot/dts/renesas/rzg3l-smarc-som.dtsi     |  20 +
 drivers/clk/renesas/Kconfig                   |   7 +-
 drivers/clk/renesas/Makefile                  |   1 +
 drivers/clk/renesas/r9a07g043-cpg.c           |   9 +
 drivers/clk/renesas/r9a07g044-cpg.c           |  13 +
 drivers/clk/renesas/r9a08g045-cpg.c           |   9 +
 drivers/clk/renesas/r9a08g046-cpg.c           | 153 ++++++++
 drivers/clk/renesas/rzg2l-cpg.c               |  91 ++++-
 drivers/clk/renesas/rzg2l-cpg.h               |   8 +
 include/dt-bindings/clock/r9a08g046-cpg.h     | 342 ++++++++++++++++++
 17 files changed, 944 insertions(+), 27 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a08g046.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r9a08g046l48.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi
 create mode 100644 drivers/clk/renesas/r9a08g046-cpg.c
 create mode 100644 include/dt-bindings/clock/r9a08g046-cpg.h

-- 
2.43.0


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v8 01/11] dt-bindings: clock: Document RZ/G3L SoC
  2026-03-24 11:43 [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform Biju
@ 2026-03-24 11:43 ` Biju
  2026-03-26 13:50   ` Geert Uytterhoeven
  2026-03-26 18:24   ` Geert Uytterhoeven
  2026-03-24 11:43 ` [PATCH v8 02/11] clk: renesas: rzg2l-cpg: Add support for critical resets Biju
                   ` (9 subsequent siblings)
  10 siblings, 2 replies; 25+ messages in thread
From: Biju @ 2026-03-24 11:43 UTC (permalink / raw)
  To: Geert Uytterhoeven, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Magnus Damm
  Cc: Biju Das, linux-renesas-soc, linux-clk, devicetree, linux-kernel,
	Prabhakar Mahadev Lad, Biju Das, Conor Dooley

From: Biju Das <biju.das.jz@bp.renesas.com>

Document the device tree bindings for the Renesas RZ/G3L SoC Clock Pulse
Generator (CPG). RZ/G3L CPG is similar to RZ/G2L CPG but has 5 clocks
compared to 1 clock on other SoCs.

Also define RZ/G3L (R9A08G046) Clock Pulse Generator Core Clocks, as
listed in section 4.4.4.1 ("Block Diagram of the Clock System"), module
clock outputs, as listed in section 4.4.2 ("Clock List r1.00") and add
Reset definitions referring to registers CPG_RST_* in Section 4.4.3
("Register") of the RZ/G3L Hardware User's Manual (Rev.1.00 Oct, 2025).

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v7->v8:
 * Fixed the R9A08G046_ADC1_ADCLK macro value 138->139.
v6->v7:
 * No change
v5->v6:
 * No change
v4->v5:
 * No change
v3->v4:
 * Updated commit description related to core clocks section in
   the hardware manual
 * Dropped CLK_P4_DIV2 from core clocks
 * Added MIPI_DSI_PLLCLK and USB_SCLK to core clocks
 * Dropped LVDS_PCLK  module clock
 * Added BSC_X_PRESET_BSC reset
v2->v3:
 * Added macros R9A08G046_ETH{0,1}_CLK_{TX,RX}_I_RMII.
 * Keep the tag from Conor as it is trivial change for just adding macros.
v1->v2:
 * Documented external ethernet clocks as it is a clock source for MUX
   inside CPG
 * Updated commit description.
 * Keep the tag from Conor as it is trivial change for adding more
   clks.
---
 .../bindings/clock/renesas,rzg2l-cpg.yaml     |  40 +-
 include/dt-bindings/clock/r9a08g046-cpg.h     | 342 ++++++++++++++++++
 2 files changed, 377 insertions(+), 5 deletions(-)
 create mode 100644 include/dt-bindings/clock/r9a08g046-cpg.h

diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
index 8c18616e5c4d..c0ce687d83ee 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -28,19 +28,30 @@ properties:
       - renesas,r9a07g044-cpg # RZ/G2{L,LC}
       - renesas,r9a07g054-cpg # RZ/V2L
       - renesas,r9a08g045-cpg # RZ/G3S
+      - renesas,r9a08g046-cpg # RZ/G3L
       - renesas,r9a09g011-cpg # RZ/V2M
 
   reg:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Clock source to CPG can be either from external clock
+                     input (EXCLK) or crystal oscillator (XIN/XOUT).
+      - description: ETH0 TXC clock input
+      - description: ETH0 RXC clock input
+      - description: ETH1 TXC clock input
+      - description: ETH1 RXC clock input
 
   clock-names:
-    description:
-      Clock source to CPG can be either from external clock input (EXCLK) or
-      crystal oscillator (XIN/XOUT).
-    const: extal
+    minItems: 1
+    items:
+      - const: extal
+      - const: eth0_txc_tx_clk
+      - const: eth0_rxc_rx_clk
+      - const: eth1_txc_tx_clk
+      - const: eth1_rxc_rx_clk
 
   '#clock-cells':
     description: |
@@ -74,6 +85,25 @@ required:
   - '#power-domain-cells'
   - '#reset-cells'
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a08g046-cpg
+    then:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          minItems: 5
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
diff --git a/include/dt-bindings/clock/r9a08g046-cpg.h b/include/dt-bindings/clock/r9a08g046-cpg.h
new file mode 100644
index 000000000000..d5ac3db22c80
--- /dev/null
+++ b/include/dt-bindings/clock/r9a08g046-cpg.h
@@ -0,0 +1,342 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ *
+ * Copyright (C) 2026 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R9A08G046_CPG_H__
+#define __DT_BINDINGS_CLOCK_R9A08G046_CPG_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* R9A08G046 CPG Core Clocks */
+#define R9A08G046_CLK_I			0
+#define R9A08G046_CLK_IC0		1
+#define R9A08G046_CLK_IC1		2
+#define R9A08G046_CLK_IC2		3
+#define R9A08G046_CLK_IC3		4
+#define R9A08G046_CLK_P0		5
+#define R9A08G046_CLK_P1		6
+#define R9A08G046_CLK_P2		7
+#define R9A08G046_CLK_P3		8
+#define R9A08G046_CLK_P4		9
+#define R9A08G046_CLK_P5		10
+#define R9A08G046_CLK_P6		11
+#define R9A08G046_CLK_P7		12
+#define R9A08G046_CLK_P8		13
+#define R9A08G046_CLK_P9		14
+#define R9A08G046_CLK_P10		15
+#define R9A08G046_CLK_P13		16
+#define R9A08G046_CLK_P14		17
+#define R9A08G046_CLK_P15		18
+#define R9A08G046_CLK_P16		19
+#define R9A08G046_CLK_P17		20
+#define R9A08G046_CLK_P18		21
+#define R9A08G046_CLK_P19		22
+#define R9A08G046_CLK_P20		23
+#define R9A08G046_CLK_M0		24
+#define R9A08G046_CLK_M1		25
+#define R9A08G046_CLK_M2		26
+#define R9A08G046_CLK_M3		27
+#define R9A08G046_CLK_M4		28
+#define R9A08G046_CLK_M5		29
+#define R9A08G046_CLK_M6		30
+#define R9A08G046_CLK_AT		31
+#define R9A08G046_CLK_B			32
+#define R9A08G046_CLK_ETHTX01		33
+#define R9A08G046_CLK_ETHTX02		34
+#define R9A08G046_CLK_ETHRX01		35
+#define R9A08G046_CLK_ETHRX02		36
+#define R9A08G046_CLK_ETHRM0		37
+#define R9A08G046_CLK_ETHTX11		38
+#define R9A08G046_CLK_ETHTX12		39
+#define R9A08G046_CLK_ETHRX11		40
+#define R9A08G046_CLK_ETHRX12		41
+#define R9A08G046_CLK_ETHRM1		42
+#define R9A08G046_CLK_G			43
+#define R9A08G046_CLK_HP		44
+#define R9A08G046_CLK_SD0		45
+#define R9A08G046_CLK_SD1		46
+#define R9A08G046_CLK_SD2		47
+#define R9A08G046_CLK_SPI0		48
+#define R9A08G046_CLK_SPI1		49
+#define R9A08G046_CLK_S0		50
+#define R9A08G046_CLK_SWD		51
+#define R9A08G046_OSCCLK		52
+#define R9A08G046_OSCCLK2		53
+#define R9A08G046_MIPI_DSI_PLLCLK	54
+#define R9A08G046_USB_SCLK		55
+
+/* R9A08G046 Module Clocks */
+#define R9A08G046_CA55_SCLK		0
+#define R9A08G046_CA55_PCLK		1
+#define R9A08G046_CA55_ATCLK		2
+#define R9A08G046_CA55_GICCLK		3
+#define R9A08G046_CA55_PERICLK		4
+#define R9A08G046_CA55_ACLK		5
+#define R9A08G046_CA55_TSCLK		6
+#define R9A08G046_CA55_CORECLK0		7
+#define R9A08G046_CA55_CORECLK1		8
+#define R9A08G046_CA55_CORECLK2		9
+#define R9A08G046_CA55_CORECLK3		10
+#define R9A08G046_SRAM_ACPU_ACLK0	11
+#define R9A08G046_SRAM_ACPU_ACLK1	12
+#define R9A08G046_SRAM_ACPU_ACLK2	13
+#define R9A08G046_GIC600_GICCLK		14
+#define R9A08G046_IA55_CLK		15
+#define R9A08G046_IA55_PCLK		16
+#define R9A08G046_MHU_PCLK		17
+#define R9A08G046_SYC_CNT_CLK		18
+#define R9A08G046_DMAC_ACLK		19
+#define R9A08G046_DMAC_PCLK		20
+#define R9A08G046_OSTM0_PCLK		21
+#define R9A08G046_OSTM1_PCLK		22
+#define R9A08G046_OSTM2_PCLK		23
+#define R9A08G046_MTU_X_MCK_MTU3	24
+#define R9A08G046_POE3_CLKM_POE		25
+#define R9A08G046_GPT_PCLK		26
+#define R9A08G046_POEG_A_CLKP		27
+#define R9A08G046_POEG_B_CLKP		28
+#define R9A08G046_POEG_C_CLKP		29
+#define R9A08G046_POEG_D_CLKP		30
+#define R9A08G046_WDT0_PCLK		31
+#define R9A08G046_WDT0_CLK		32
+#define R9A08G046_WDT1_PCLK		33
+#define R9A08G046_WDT1_CLK		34
+#define R9A08G046_WDT2_PCLK		35
+#define R9A08G046_WDT2_CLK		36
+#define R9A08G046_XSPI_HCLK		37
+#define R9A08G046_XSPI_ACLK		38
+#define R9A08G046_XSPI_CLK		39
+#define R9A08G046_XSPI_CLKX2		40
+#define R9A08G046_SDHI0_IMCLK		41
+#define R9A08G046_SDHI0_IMCLK2		42
+#define R9A08G046_SDHI0_CLK_HS		43
+#define R9A08G046_SDHI0_IACLKS		44
+#define R9A08G046_SDHI0_IACLKM		45
+#define R9A08G046_SDHI1_IMCLK		46
+#define R9A08G046_SDHI1_IMCLK2		47
+#define R9A08G046_SDHI1_CLK_HS		48
+#define R9A08G046_SDHI1_IACLKS		49
+#define R9A08G046_SDHI1_IACLKM		50
+#define R9A08G046_SDHI2_IMCLK		51
+#define R9A08G046_SDHI2_IMCLK2		52
+#define R9A08G046_SDHI2_CLK_HS		53
+#define R9A08G046_SDHI2_IACLKS		54
+#define R9A08G046_SDHI2_IACLKM		55
+#define R9A08G046_GE3D_CLK		56
+#define R9A08G046_GE3D_AXI_CLK		57
+#define R9A08G046_GE3D_ACE_CLK		58
+#define R9A08G046_ISU_ACLK		59
+#define R9A08G046_ISU_PCLK		60
+#define R9A08G046_H264_CLK_A		61
+#define R9A08G046_H264_CLK_P		62
+#define R9A08G046_CRU_SYSCLK		63
+#define R9A08G046_CRU_VCLK		64
+#define R9A08G046_CRU_PCLK		65
+#define R9A08G046_CRU_ACLK		66
+#define R9A08G046_MIPI_DSI_SYSCLK	67
+#define R9A08G046_MIPI_DSI_ACLK		68
+#define R9A08G046_MIPI_DSI_PCLK		69
+#define R9A08G046_MIPI_DSI_VCLK		70
+#define R9A08G046_MIPI_DSI_LPCLK	71
+#define R9A08G046_LVDS_PLLCLK		72
+#define R9A08G046_LVDS_CLK_DOT0		73
+#define R9A08G046_LCDC_CLK_A		74
+#define R9A08G046_LCDC_CLK_D		75
+#define R9A08G046_LCDC_CLK_P		76
+#define R9A08G046_SSI0_PCLK2		77
+#define R9A08G046_SSI0_PCLK_SFR		78
+#define R9A08G046_SSI1_PCLK2		79
+#define R9A08G046_SSI1_PCLK_SFR		80
+#define R9A08G046_SSI2_PCLK2		81
+#define R9A08G046_SSI2_PCLK_SFR		82
+#define R9A08G046_SSI3_PCLK2		83
+#define R9A08G046_SSI3_PCLK_SFR		84
+#define R9A08G046_USB_U2H0_HCLK		85
+#define R9A08G046_USB_U2H1_HCLK		86
+#define R9A08G046_USB_U2P0_EXR_CPUCLK	87
+#define R9A08G046_USB_U2P1_EXR_CPUCLK	88
+#define R9A08G046_USB_PCLK		89
+#define R9A08G046_ETH0_CLK_AXI		90
+#define R9A08G046_ETH0_CLK_CHI		91
+#define R9A08G046_ETH0_CLK_TX_I		92
+#define R9A08G046_ETH0_CLK_RX_I		93
+#define R9A08G046_ETH0_CLK_TX_180_I	94
+#define R9A08G046_ETH0_CLK_RX_180_I	95
+#define R9A08G046_ETH0_CLK_RMII_I	96
+#define R9A08G046_ETH0_CLK_PTP_REF_I	97
+#define R9A08G046_ETH0_CLK_TX_I_RMII	98
+#define R9A08G046_ETH0_CLK_RX_I_RMII	99
+#define R9A08G046_ETH1_CLK_AXI		100
+#define R9A08G046_ETH1_CLK_CHI		101
+#define R9A08G046_ETH1_CLK_TX_I		102
+#define R9A08G046_ETH1_CLK_RX_I		103
+#define R9A08G046_ETH1_CLK_TX_180_I	104
+#define R9A08G046_ETH1_CLK_RX_180_I	105
+#define R9A08G046_ETH1_CLK_RMII_I	106
+#define R9A08G046_ETH1_CLK_PTP_REF_I	107
+#define R9A08G046_ETH1_CLK_TX_I_RMII	108
+#define R9A08G046_ETH1_CLK_RX_I_RMII	109
+#define R9A08G046_I2C0_PCLK		110
+#define R9A08G046_I2C1_PCLK		111
+#define R9A08G046_I2C2_PCLK		112
+#define R9A08G046_I2C3_PCLK		113
+#define R9A08G046_SCIF0_CLK_PCK		114
+#define R9A08G046_SCIF1_CLK_PCK		115
+#define R9A08G046_SCIF2_CLK_PCK		116
+#define R9A08G046_SCIF3_CLK_PCK		117
+#define R9A08G046_SCIF4_CLK_PCK		118
+#define R9A08G046_SCIF5_CLK_PCK		119
+#define R9A08G046_RSCI0_PCLK		120
+#define R9A08G046_RSCI0_TCLK		121
+#define R9A08G046_RSCI1_PCLK		122
+#define R9A08G046_RSCI1_TCLK		123
+#define R9A08G046_RSCI2_PCLK		124
+#define R9A08G046_RSCI2_TCLK		125
+#define R9A08G046_RSCI3_PCLK		126
+#define R9A08G046_RSCI3_TCLK		127
+#define R9A08G046_RSPI0_PCLK		128
+#define R9A08G046_RSPI0_TCLK		129
+#define R9A08G046_RSPI1_PCLK		130
+#define R9A08G046_RSPI1_TCLK		131
+#define R9A08G046_RSPI2_PCLK		132
+#define R9A08G046_RSPI2_TCLK		133
+#define R9A08G046_CANFD_PCLK		134
+#define R9A08G046_CANFD_CLK_RAM		135
+#define R9A08G046_GPIO_HCLK		136
+#define R9A08G046_ADC0_ADCLK		137
+#define R9A08G046_ADC0_PCLK		138
+#define R9A08G046_ADC1_ADCLK		139
+#define R9A08G046_ADC1_PCLK		140
+#define R9A08G046_TSU_PCLK		141
+#define R9A08G046_PDM_PCLK		142
+#define R9A08G046_PDM_CCLK		143
+#define R9A08G046_PCI_ACLK		144
+#define R9A08G046_PCI_CLKL1PM		145
+#define R9A08G046_PCI_CLK_PMU		146
+#define R9A08G046_SPDIF_PCLK		147
+#define R9A08G046_I3C_TCLK		148
+#define R9A08G046_I3C_PCLK		149
+#define R9A08G046_VBAT_BCLK		150
+#define R9A08G046_BSC_X_BCK_BSC		151
+
+/* R9A08G046 Resets */
+#define R9A08G046_CA55_RST0_0		0
+#define R9A08G046_CA55_RST0_1		1
+#define R9A08G046_CA55_RST0_2		2
+#define R9A08G046_CA55_RST0_3		3
+#define R9A08G046_CA55_RST4_0		4
+#define R9A08G046_CA55_RST4_1		5
+#define R9A08G046_CA55_RST4_2		6
+#define R9A08G046_CA55_RST4_3		7
+#define R9A08G046_CA55_RST8		8
+#define R9A08G046_CA55_RST9		9
+#define R9A08G046_CA55_RST10		10
+#define R9A08G046_CA55_RST11		11
+#define R9A08G046_CA55_RST12		12
+#define R9A08G046_CA55_RST13		13
+#define R9A08G046_CA55_RST14		14
+#define R9A08G046_CA55_RST15		15
+#define R9A08G046_CA55_RST16		16
+#define R9A08G046_SRAM_ACPU_ARESETN0	17
+#define R9A08G046_SRAM_ACPU_ARESETN1	18
+#define R9A08G046_SRAM_ACPU_ARESETN2	19
+#define R9A08G046_GIC600_GICRESET_N	20
+#define R9A08G046_GIC600_DBG_GICRESET_N	21
+#define R9A08G046_IA55_RESETN		22
+#define R9A08G046_MHU_RESETN		23
+#define R9A08G046_SYC_RESETN		24
+#define R9A08G046_DMAC_ARESETN		25
+#define R9A08G046_DMAC_RST_ASYNC	26
+#define R9A08G046_GTM0_PRESETZ		27
+#define R9A08G046_GTM1_PRESETZ		28
+#define R9A08G046_GTM2_PRESETZ		29
+#define R9A08G046_MTU_X_PRESET_MTU3	30
+#define R9A08G046_POE3_RST_M_REG	31
+#define R9A08G046_GPT_RST_C		32
+#define R9A08G046_POEG_A_RST		33
+#define R9A08G046_POEG_B_RST		34
+#define R9A08G046_POEG_C_RST		35
+#define R9A08G046_POEG_D_RST		36
+#define R9A08G046_WDT0_PRESETN		37
+#define R9A08G046_WDT1_PRESETN		38
+#define R9A08G046_WDT2_PRESETN		39
+#define R9A08G046_XSPI_HRESETN		40
+#define R9A08G046_XSPI_ARESETN		41
+#define R9A08G046_SDHI0_IXRST		42
+#define R9A08G046_SDHI1_IXRST		43
+#define R9A08G046_SDHI2_IXRST		44
+#define R9A08G046_SDHI0_IXRSTAXIM	45
+#define R9A08G046_SDHI0_IXRSTAXIS	46
+#define R9A08G046_SDHI1_IXRSTAXIM	47
+#define R9A08G046_SDHI1_IXRSTAXIS	48
+#define R9A08G046_SDHI2_IXRSTAXIM	49
+#define R9A08G046_SDHI2_IXRSTAXIS	50
+#define R9A08G046_GE3D_RESETN		51
+#define R9A08G046_GE3D_AXI_RESETN	52
+#define R9A08G046_GE3D_ACE_RESETN	53
+#define R9A08G046_ISU_ARESETN		54
+#define R9A08G046_ISU_PRESETN		55
+#define R9A08G046_H264_X_RESET_VCP	56
+#define R9A08G046_H264_CP_PRESET_P	57
+#define R9A08G046_CRU_CMN_RSTB		58
+#define R9A08G046_CRU_PRESETN		59
+#define R9A08G046_CRU_ARESETN		60
+#define R9A08G046_MIPI_DSI_CMN_RSTB	61
+#define R9A08G046_MIPI_DSI_ARESET_N	62
+#define R9A08G046_MIPI_DSI_PRESET_N	63
+#define R9A08G046_LCDC_RESET_N		64
+#define R9A08G046_SSI0_RST_M2_REG	65
+#define R9A08G046_SSI1_RST_M2_REG	66
+#define R9A08G046_SSI2_RST_M2_REG	67
+#define R9A08G046_SSI3_RST_M2_REG	68
+#define R9A08G046_USB_U2H0_HRESETN	69
+#define R9A08G046_USB_U2H1_HRESETN	70
+#define R9A08G046_USB_U2P0_EXL_SYSRST	71
+#define R9A08G046_USB_PRESETN		72
+#define R9A08G046_USB_U2P1_EXL_SYSRST	73
+#define R9A08G046_ETH0_ARESET_N		74
+#define R9A08G046_ETH1_ARESET_N		75
+#define R9A08G046_I2C0_MRST		76
+#define R9A08G046_I2C1_MRST		77
+#define R9A08G046_I2C2_MRST		78
+#define R9A08G046_I2C3_MRST		79
+#define R9A08G046_SCIF0_RST_SYSTEM_N	80
+#define R9A08G046_SCIF1_RST_SYSTEM_N	81
+#define R9A08G046_SCIF2_RST_SYSTEM_N	82
+#define R9A08G046_SCIF3_RST_SYSTEM_N	83
+#define R9A08G046_SCIF4_RST_SYSTEM_N	84
+#define R9A08G046_SCIF5_RST_SYSTEM_N	85
+#define R9A08G046_RSPI0_PRESETN		86
+#define R9A08G046_RSPI1_PRESETN		87
+#define R9A08G046_RSPI2_PRESETN		88
+#define R9A08G046_RSPI0_TRESETN		89
+#define R9A08G046_RSPI1_TRESETN		90
+#define R9A08G046_RSPI2_TRESETN		91
+#define R9A08G046_CANFD_RSTP_N		92
+#define R9A08G046_CANFD_RSTC_N		93
+#define R9A08G046_GPIO_RSTN		94
+#define R9A08G046_GPIO_PORT_RESETN	95
+#define R9A08G046_GPIO_SPARE_RESETN	96
+#define R9A08G046_ADC0_PRESETN		97
+#define R9A08G046_ADC0_ADRST_N		98
+#define R9A08G046_ADC1_PRESETN		99
+#define R9A08G046_ADC1_ADRST_N		100
+#define R9A08G046_TSU_PRESETN		101
+#define R9A08G046_PDM_PRESETN		102
+#define R9A08G046_PCI_ARESETN		103
+#define R9A08G046_SPDIF_RST		104
+#define R9A08G046_I3C_TRESETN		105
+#define R9A08G046_I3C_PRESETN		106
+#define R9A08G046_VBAT_BRESETN		107
+#define R9A08G046_RSCI0_PRESETN		108
+#define R9A08G046_RSCI1_PRESETN		109
+#define R9A08G046_RSCI2_PRESETN		110
+#define R9A08G046_RSCI3_PRESETN		111
+#define R9A08G046_RSCI0_TRESETN		112
+#define R9A08G046_RSCI1_TRESETN		113
+#define R9A08G046_RSCI2_TRESETN		114
+#define R9A08G046_RSCI3_TRESETN		115
+#define R9A08G046_LVDS_RESET_N		116
+#define R9A08G046_BSC_X_PRESET_BSC	117
+
+#endif /* __DT_BINDINGS_CLOCK_R9A08G046_CPG_H__ */
-- 
2.43.0


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v8 02/11] clk: renesas: rzg2l-cpg: Add support for critical resets
  2026-03-24 11:43 [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform Biju
  2026-03-24 11:43 ` [PATCH v8 01/11] dt-bindings: clock: Document RZ/G3L SoC Biju
@ 2026-03-24 11:43 ` Biju
  2026-03-26 13:50   ` Geert Uytterhoeven
  2026-03-24 11:43 ` [PATCH v8 03/11] clk: renesas: r9a07g04{3,4}/r9a08g045-cpg: Add critical reset entries Biju
                   ` (8 subsequent siblings)
  10 siblings, 1 reply; 25+ messages in thread
From: Biju @ 2026-03-24 11:43 UTC (permalink / raw)
  To: Geert Uytterhoeven, Michael Turquette, Stephen Boyd, Philipp Zabel
  Cc: Biju Das, linux-renesas-soc, linux-clk, linux-kernel,
	Prabhakar Mahadev Lad, Biju Das

From: Biju Das <biju.das.jz@bp.renesas.com>

Some reset lines must remain deasserted at all times after boot, as
asserting them would disable critical system functionality with no owning
driver to restore them. This mirrors the existing crit_mod_clks mechanism
which protects critical module clocks from being disabled.

On RZ/G2L family SoCs, the DMA reset must be remain deasserted for routing
some peripheral interrupts to CPU.

Add crit_resets and num_crit_resets fields to struct rzg2l_cpg_info to
allow SoC-specific data tables to declare reset IDs that must never be
asserted.

Introduce rzg2l_cpg_deassert_crit_resets() to iterate over all critical
resets and deassert them. Call it both at probe time and during resume to
ensure critical peripherals are held out of reset after power-on and
suspend/resume cycles.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v7->v8:
 * No change
v6->v7:
 * No change
v5->v6:
 * Moved loop variable declaration inside for loops in
   __rzg2l_cpg_assert() and rzg2l_cpg_deassert_crit_resets()
 * Collected tag
v4->v5:
 * No change
v4:
 * Moved this patch from [1] as it is boot-dependent
 [1] https://lore.kernel.org/all/20260306134228.871815-1-biju.das.jz@bp.renesas.com/
---
 drivers/clk/renesas/rzg2l-cpg.c | 30 ++++++++++++++++++++++++++++++
 drivers/clk/renesas/rzg2l-cpg.h |  7 +++++++
 2 files changed, 37 insertions(+)

diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index c0584bab58a3..f9e4af7f49d0 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -1765,6 +1765,13 @@ static int __rzg2l_cpg_assert(struct reset_controller_dev *rcdev,
 	dev_dbg(rcdev->dev, "%s id:%ld offset:0x%x\n",
 		assert ? "assert" : "deassert", id, CLK_RST_R(reg));
 
+	if (assert) {
+		for (unsigned int i = 0; i < priv->info->num_crit_resets; i++) {
+			if (id == priv->info->crit_resets[i])
+				return 0;
+		}
+	}
+
 	if (!assert)
 		value |= mask;
 	writel(value, priv->base + CLK_RST_R(reg));
@@ -1802,6 +1809,20 @@ static int rzg2l_cpg_deassert(struct reset_controller_dev *rcdev,
 	return __rzg2l_cpg_assert(rcdev, id, false);
 }
 
+static int rzg2l_cpg_deassert_crit_resets(struct reset_controller_dev *rcdev,
+					  const struct rzg2l_cpg_info *info)
+{
+	int ret;
+
+	for (unsigned int i = 0; i < info->num_crit_resets; i++) {
+		ret = rzg2l_cpg_deassert(rcdev, info->crit_resets[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static int rzg2l_cpg_reset(struct reset_controller_dev *rcdev,
 			   unsigned long id)
 {
@@ -2051,6 +2072,10 @@ static int __init rzg2l_cpg_probe(struct platform_device *pdev)
 	if (error)
 		return error;
 
+	error = rzg2l_cpg_deassert_crit_resets(&priv->rcdev, info);
+	if (error)
+		return error;
+
 	debugfs_create_file("mstop", 0444, NULL, priv, &rzg2l_mod_clock_mstop_fops);
 	return 0;
 }
@@ -2058,6 +2083,11 @@ static int __init rzg2l_cpg_probe(struct platform_device *pdev)
 static int rzg2l_cpg_resume(struct device *dev)
 {
 	struct rzg2l_cpg_priv *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = rzg2l_cpg_deassert_crit_resets(&priv->rcdev, priv->info);
+	if (ret)
+		return ret;
 
 	rzg2l_mod_clock_init_mstop(priv);
 
diff --git a/drivers/clk/renesas/rzg2l-cpg.h b/drivers/clk/renesas/rzg2l-cpg.h
index 55e815be16c8..af0a003d93f7 100644
--- a/drivers/clk/renesas/rzg2l-cpg.h
+++ b/drivers/clk/renesas/rzg2l-cpg.h
@@ -276,6 +276,9 @@ struct rzg2l_reset {
  * @crit_mod_clks: Array with Module Clock IDs of critical clocks that
  *                 should not be disabled without a knowledgeable driver
  * @num_crit_mod_clks: Number of entries in crit_mod_clks[]
+ * @crit_resets: Array with Reset IDs of critical resets that should not be
+ *               asserted without a knowledgeable driver
+ * @num_crit_resets: Number of entries in crit_resets[]
  * @has_clk_mon_regs: Flag indicating whether the SoC has CLK_MON registers
  */
 struct rzg2l_cpg_info {
@@ -302,6 +305,10 @@ struct rzg2l_cpg_info {
 	const unsigned int *crit_mod_clks;
 	unsigned int num_crit_mod_clks;
 
+	/* Critical Resets that should not be asserted */
+	const unsigned int *crit_resets;
+	unsigned int num_crit_resets;
+
 	bool has_clk_mon_regs;
 };
 
-- 
2.43.0


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v8 03/11] clk: renesas: r9a07g04{3,4}/r9a08g045-cpg: Add critical reset entries
  2026-03-24 11:43 [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform Biju
  2026-03-24 11:43 ` [PATCH v8 01/11] dt-bindings: clock: Document RZ/G3L SoC Biju
  2026-03-24 11:43 ` [PATCH v8 02/11] clk: renesas: rzg2l-cpg: Add support for critical resets Biju
@ 2026-03-24 11:43 ` Biju
  2026-03-26 13:51   ` Geert Uytterhoeven
  2026-03-24 11:43 ` [PATCH v8 04/11] clk: renesas: rzg2l-cpg: Add helper for mod clock enable/disable Biju
                   ` (7 subsequent siblings)
  10 siblings, 1 reply; 25+ messages in thread
From: Biju @ 2026-03-24 11:43 UTC (permalink / raw)
  To: Geert Uytterhoeven, Michael Turquette, Stephen Boyd, Philipp Zabel
  Cc: Biju Das, linux-renesas-soc, linux-clk, linux-kernel,
	Prabhakar Mahadev Lad, Biju Das

From: Biju Das <biju.das.jz@bp.renesas.com>

The RZ/G2L SoC family requires DMA resets to be deasserted for routing
some peripheral interrupts to the CPU. Asserting these resets after boot
would silently break interrupt delivery with no driver to restore them.

Mark the DMA resets as critical by adding them to the crit_resets table
in the SoC-specific rzg2l_cpg_info for r9a07g043, r9a07g044, and
r9a08g045, preventing __rzg2l_cpg_assert() from asserting them and
ensuring they are deasserted during probe and resume.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v7->v8:
 * No change
v6->v7:
 * Updated r9a07g043_cpg_info by inserting a blank line before
  .has_clk_mon_regs
 * Replaced r9a07g044_critical_resets->r9a07g044_crit_resets and
   r9a08g045_critical_resets->r9a08g045_crit_resets for consistency
v5->v6:
 * Replaced r9a07g043_critical_resets->r9a07g043_crit_resets for
   consistency
 * Collected tag
v4->v5:
 * No change
v4:
 * Moved this patch from [1] as it is boot-dependent
 [1] https://lore.kernel.org/all/20260306134228.871815-1-biju.das.jz@bp.renesas.com/
---
 drivers/clk/renesas/r9a07g043-cpg.c |  9 +++++++++
 drivers/clk/renesas/r9a07g044-cpg.c | 13 +++++++++++++
 drivers/clk/renesas/r9a08g045-cpg.c |  9 +++++++++
 3 files changed, 31 insertions(+)

diff --git a/drivers/clk/renesas/r9a07g043-cpg.c b/drivers/clk/renesas/r9a07g043-cpg.c
index 33e9a1223c72..70944ef8c5b8 100644
--- a/drivers/clk/renesas/r9a07g043-cpg.c
+++ b/drivers/clk/renesas/r9a07g043-cpg.c
@@ -379,6 +379,11 @@ static const unsigned int r9a07g043_crit_mod_clks[] __initconst = {
 	MOD_CLK_BASE + R9A07G043_DMAC_ACLK,
 };
 
+static const unsigned int r9a07g043_crit_resets[] = {
+	R9A07G043_DMAC_ARESETN,
+	R9A07G043_DMAC_RST_ASYNC,
+};
+
 #ifdef CONFIG_ARM64
 static const unsigned int r9a07g043_no_pm_mod_clks[] = {
 	MOD_CLK_BASE + R9A07G043_CRU_SYSCLK,
@@ -420,5 +425,9 @@ const struct rzg2l_cpg_info r9a07g043_cpg_info = {
 	.num_resets = R9A07G043_IAX45_RESETN + 1, /* Last reset ID + 1 */
 #endif
 
+	/* Critical Resets */
+	.crit_resets = r9a07g043_crit_resets,
+	.num_crit_resets = ARRAY_SIZE(r9a07g043_crit_resets),
+
 	.has_clk_mon_regs = true,
 };
diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index 0dd264877b9a..2d3487203bf5 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -489,6 +489,11 @@ static const unsigned int r9a07g044_crit_mod_clks[] __initconst = {
 	MOD_CLK_BASE + R9A07G044_DMAC_ACLK,
 };
 
+static const unsigned int r9a07g044_crit_resets[] = {
+	R9A07G044_DMAC_ARESETN,
+	R9A07G044_DMAC_RST_ASYNC,
+};
+
 static const unsigned int r9a07g044_no_pm_mod_clks[] = {
 	MOD_CLK_BASE + R9A07G044_CRU_SYSCLK,
 	MOD_CLK_BASE + R9A07G044_CRU_VCLK,
@@ -519,6 +524,10 @@ const struct rzg2l_cpg_info r9a07g044_cpg_info = {
 	.resets = r9a07g044_resets,
 	.num_resets = R9A07G044_TSU_PRESETN + 1, /* Last reset ID + 1 */
 
+	/* Critical Resets */
+	.crit_resets = r9a07g044_crit_resets,
+	.num_crit_resets = ARRAY_SIZE(r9a07g044_crit_resets),
+
 	.has_clk_mon_regs = true,
 };
 #endif
@@ -548,6 +557,10 @@ const struct rzg2l_cpg_info r9a07g054_cpg_info = {
 	.resets = r9a07g044_resets,
 	.num_resets = R9A07G054_STPAI_ARESETN + 1, /* Last reset ID + 1 */
 
+	/* Critical Resets */
+	.crit_resets = r9a07g044_crit_resets,
+	.num_crit_resets = ARRAY_SIZE(r9a07g044_crit_resets),
+
 	.has_clk_mon_regs = true,
 };
 #endif
diff --git a/drivers/clk/renesas/r9a08g045-cpg.c b/drivers/clk/renesas/r9a08g045-cpg.c
index 79e7b19c7882..1232fec913eb 100644
--- a/drivers/clk/renesas/r9a08g045-cpg.c
+++ b/drivers/clk/renesas/r9a08g045-cpg.c
@@ -361,6 +361,11 @@ static const unsigned int r9a08g045_crit_mod_clks[] __initconst = {
 	MOD_CLK_BASE + R9A08G045_VBAT_BCLK,
 };
 
+static const unsigned int r9a08g045_crit_resets[] = {
+	R9A08G045_DMAC_ARESETN,
+	R9A08G045_DMAC_RST_ASYNC,
+};
+
 static const unsigned int r9a08g045_no_pm_mod_clks[] = {
 	MOD_CLK_BASE + R9A08G045_PCI_CLKL1PM,
 };
@@ -389,5 +394,9 @@ const struct rzg2l_cpg_info r9a08g045_cpg_info = {
 	.resets = r9a08g045_resets,
 	.num_resets = R9A08G045_VBAT_BRESETN + 1, /* Last reset ID + 1 */
 
+	/* Critical Resets */
+	.crit_resets = r9a08g045_crit_resets,
+	.num_crit_resets = ARRAY_SIZE(r9a08g045_crit_resets),
+
 	.has_clk_mon_regs = true,
 };
-- 
2.43.0


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v8 04/11] clk: renesas: rzg2l-cpg: Add helper for mod clock enable/disable
  2026-03-24 11:43 [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform Biju
                   ` (2 preceding siblings ...)
  2026-03-24 11:43 ` [PATCH v8 03/11] clk: renesas: r9a07g04{3,4}/r9a08g045-cpg: Add critical reset entries Biju
@ 2026-03-24 11:43 ` Biju
  2026-03-26 13:51   ` Geert Uytterhoeven
  2026-03-24 11:43 ` [PATCH v8 05/11] clk: renesas: rzg2l-cpg: Add rzg2l_mod_clock_init_mstop_helper() Biju
                   ` (6 subsequent siblings)
  10 siblings, 1 reply; 25+ messages in thread
From: Biju @ 2026-03-24 11:43 UTC (permalink / raw)
  To: Geert Uytterhoeven, Michael Turquette, Stephen Boyd, Philipp Zabel
  Cc: Biju Das, linux-renesas-soc, linux-clk, linux-kernel,
	Prabhakar Mahadev Lad, Biju Das

From: Biju Das <biju.das.jz@bp.renesas.com>

Refactor rzg2l_mod_clock_endisable() by extracting its logic into a new
helper function rzg2l_mod_clock_endisable_helper(), which accepts an
additional set_mstop_state boolean parameter. This allows callers to
control whether the module stop state is updated alongside the clock
enable/disable operation. No functional change for existing callers.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v8:
 * New patch
---
 drivers/clk/renesas/rzg2l-cpg.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index f9e4af7f49d0..a38401c18dcf 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -1439,7 +1439,8 @@ static int rzg2l_mod_clock_mstop_show(struct seq_file *s, void *what)
 }
 DEFINE_SHOW_ATTRIBUTE(rzg2l_mod_clock_mstop);
 
-static int rzg2l_mod_clock_endisable(struct clk_hw *hw, bool enable)
+static int rzg2l_mod_clock_endisable_helper(struct clk_hw *hw, bool enable,
+					    bool set_mstop_state)
 {
 	struct mod_clock *clock = to_mod_clock(hw);
 	struct rzg2l_cpg_priv *priv = clock->priv;
@@ -1464,9 +1465,11 @@ static int rzg2l_mod_clock_endisable(struct clk_hw *hw, bool enable)
 	scoped_guard(spinlock_irqsave, &priv->rmw_lock) {
 		if (enable) {
 			writel(value, priv->base + CLK_ON_R(reg));
-			rzg2l_mod_clock_module_set_state(clock, false);
+			if (set_mstop_state)
+				rzg2l_mod_clock_module_set_state(clock, false);
 		} else {
-			rzg2l_mod_clock_module_set_state(clock, true);
+			if (set_mstop_state)
+				rzg2l_mod_clock_module_set_state(clock, true);
 			writel(value, priv->base + CLK_ON_R(reg));
 		}
 	}
@@ -1486,6 +1489,11 @@ static int rzg2l_mod_clock_endisable(struct clk_hw *hw, bool enable)
 	return error;
 }
 
+static int rzg2l_mod_clock_endisable(struct clk_hw *hw, bool enable)
+{
+	return rzg2l_mod_clock_endisable_helper(hw, enable, true);
+}
+
 static int rzg2l_mod_clock_enable(struct clk_hw *hw)
 {
 	struct mod_clock *clock = to_mod_clock(hw);
-- 
2.43.0


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v8 05/11] clk: renesas: rzg2l-cpg: Add rzg2l_mod_clock_init_mstop_helper()
  2026-03-24 11:43 [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform Biju
                   ` (3 preceding siblings ...)
  2026-03-24 11:43 ` [PATCH v8 04/11] clk: renesas: rzg2l-cpg: Add helper for mod clock enable/disable Biju
@ 2026-03-24 11:43 ` Biju
  2026-03-26 13:52   ` Geert Uytterhoeven
  2026-03-24 11:43 ` [PATCH v8 06/11] clk: renesas: rzg2l-cpg: Re-enable critical module clocks during resume Biju
                   ` (5 subsequent siblings)
  10 siblings, 1 reply; 25+ messages in thread
From: Biju @ 2026-03-24 11:43 UTC (permalink / raw)
  To: Geert Uytterhoeven, Michael Turquette, Stephen Boyd, Philipp Zabel
  Cc: Biju Das, linux-renesas-soc, linux-clk, linux-kernel,
	Prabhakar Mahadev Lad, Biju Das

From: Biju Das <biju.das.jz@bp.renesas.com>

Refactor the mstop initialisation logic in rzg2l_mod_clock_init_mstop()
into a dedicated helper function rzg2l_mod_clock_init_mstop_helper(). This
decouples the logic for setting module stop state on disabled clocks from
the iteration loop, allowing it to be reused during resume to re-enable
critical clocks.

No functional change.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v7->v8:
 * Fit the comments in rzg2l_mod_clock_init_mstop_helper() to 80 character
   space.
v6->v7:
 * Collected tag
v6:
 * New patch
---
 drivers/clk/renesas/rzg2l-cpg.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index a38401c18dcf..738a4b182f27 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -1594,6 +1594,20 @@ static struct mstop *rzg2l_mod_clock_get_mstop(struct rzg2l_cpg_priv *priv, u32
 	return NULL;
 }
 
+static void rzg2l_mod_clock_init_mstop_helper(struct rzg2l_cpg_priv *priv,
+					      struct mod_clock *clk)
+{
+	/*
+	 * Out of reset all modules are enabled. Set module state in case
+	 * associated clocks are disabled at probe. Otherwise module is in
+	 * invalid HW state.
+	 */
+	scoped_guard(spinlock_irqsave, &priv->rmw_lock) {
+		if (!rzg2l_mod_clock_is_enabled(&clk->hw))
+			rzg2l_mod_clock_module_set_state(clk, true);
+	}
+}
+
 static void rzg2l_mod_clock_init_mstop(struct rzg2l_cpg_priv *priv)
 {
 	struct mod_clock *clk;
@@ -1603,15 +1617,7 @@ static void rzg2l_mod_clock_init_mstop(struct rzg2l_cpg_priv *priv)
 		if (!clk->mstop)
 			continue;
 
-		/*
-		 * Out of reset all modules are enabled. Set module state
-		 * in case associated clocks are disabled at probe. Otherwise
-		 * module is in invalid HW state.
-		 */
-		scoped_guard(spinlock_irqsave, &priv->rmw_lock) {
-			if (!rzg2l_mod_clock_is_enabled(&clk->hw))
-				rzg2l_mod_clock_module_set_state(clk, true);
-		}
+		rzg2l_mod_clock_init_mstop_helper(priv, clk);
 	}
 }
 
-- 
2.43.0


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v8 06/11] clk: renesas: rzg2l-cpg: Re-enable critical module clocks during resume
  2026-03-24 11:43 [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform Biju
                   ` (4 preceding siblings ...)
  2026-03-24 11:43 ` [PATCH v8 05/11] clk: renesas: rzg2l-cpg: Add rzg2l_mod_clock_init_mstop_helper() Biju
@ 2026-03-24 11:43 ` Biju
  2026-03-26 13:52   ` Geert Uytterhoeven
  2026-03-24 11:43 ` [PATCH v8 07/11] clk: renesas: Add support for RZ/G3L SoC Biju
                   ` (4 subsequent siblings)
  10 siblings, 1 reply; 25+ messages in thread
From: Biju @ 2026-03-24 11:43 UTC (permalink / raw)
  To: Geert Uytterhoeven, Michael Turquette, Stephen Boyd, Philipp Zabel
  Cc: Biju Das, linux-kernel, linux-renesas-soc, linux-clk,
	Prabhakar Mahadev Lad, Biju Das

From: Biju Das <biju.das.jz@bp.renesas.com>

After a suspend/resume cycle, critical module clocks (CLK_IS_CRITICAL) may
be left disabled as there is no owning driver to restore them, unlike
regular clocks.
Add rzg2l_mod_enable_crit_clock_init_mstop() which walks all module clocks
on resume, re-enables any critical clock found disabled, and then restores
the MSTOP state for clocks that have one via the existing helper. This
replaces the direct call to rzg2l_mod_clock_init_mstop() in
rzg2l_cpg_resume(), preserving the correct clock-before-MSTOP restore
ordering.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v7->v8:
 * Updated comment in rzg2l_mod_clock_init_mstop_helper() as resume()
   calls this function.
 * To avoid setting module state twice and also not to update the initial
   mstop state for the critical clocks state during probe, replaced
   rzg2l_mod_clock_endisable()->rzg2l_mod_clock_endisable_helper().
v6->v7:
 * Updated commit description
 * RZ/V2M has critical clocks but no mstop, so move the mstop check after
   enabling critical clocks. After this, we need to restore only mstop for
   module clocks, so remove the inverted logic and continue statement and
   directly call rzg2l_mod_clock_init_mstop_helper() if the clock has
   mstop.
v5->v6:
 * Updated commit description
 * Dropped the list implementation.
 * Replaced  rzg2l_mod_clock_init_mstop->rzg2l_mod_enable_crit_clock_init_mstop() 
   for enabling critical clks and restoring mstop state during resume.
v4->v5:
 * No change
v4:
 * Moved this patch from [1] as it is boot-dependent
 [1] https://lore.kernel.org/all/20260306134228.871815-1-biju.das.jz@bp.renesas.com/
---
 drivers/clk/renesas/rzg2l-cpg.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index 738a4b182f27..70228d8a2ef3 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -1599,8 +1599,8 @@ static void rzg2l_mod_clock_init_mstop_helper(struct rzg2l_cpg_priv *priv,
 {
 	/*
 	 * Out of reset all modules are enabled. Set module state in case
-	 * associated clocks are disabled at probe. Otherwise module is in
-	 * invalid HW state.
+	 * associated clocks are disabled at probe/resume. Otherwise module
+	 * is in invalid HW state.
 	 */
 	scoped_guard(spinlock_irqsave, &priv->rmw_lock) {
 		if (!rzg2l_mod_clock_is_enabled(&clk->hw))
@@ -1608,6 +1608,21 @@ static void rzg2l_mod_clock_init_mstop_helper(struct rzg2l_cpg_priv *priv,
 	}
 }
 
+static void rzg2l_mod_enable_crit_clock_init_mstop(struct rzg2l_cpg_priv *priv)
+{
+	struct mod_clock *clk;
+	struct clk_hw *hw;
+
+	for_each_mod_clock(clk, hw, priv) {
+		if ((clk_hw_get_flags(&clk->hw) & CLK_IS_CRITICAL) &&
+		    (!rzg2l_mod_clock_is_enabled(&clk->hw)))
+			rzg2l_mod_clock_endisable_helper(&clk->hw, true, false);
+
+		if (clk->mstop)
+			rzg2l_mod_clock_init_mstop_helper(priv, clk);
+	}
+}
+
 static void rzg2l_mod_clock_init_mstop(struct rzg2l_cpg_priv *priv)
 {
 	struct mod_clock *clk;
@@ -2103,7 +2118,7 @@ static int rzg2l_cpg_resume(struct device *dev)
 	if (ret)
 		return ret;
 
-	rzg2l_mod_clock_init_mstop(priv);
+	rzg2l_mod_enable_crit_clock_init_mstop(priv);
 
 	return 0;
 }
-- 
2.43.0


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v8 07/11] clk: renesas: Add support for RZ/G3L SoC
  2026-03-24 11:43 [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform Biju
                   ` (5 preceding siblings ...)
  2026-03-24 11:43 ` [PATCH v8 06/11] clk: renesas: rzg2l-cpg: Re-enable critical module clocks during resume Biju
@ 2026-03-24 11:43 ` Biju
  2026-03-26 13:53   ` Geert Uytterhoeven
  2026-03-24 11:43 ` [PATCH v8 08/11] arm64: dts: renesas: Add initial DTSI " Biju
                   ` (3 subsequent siblings)
  10 siblings, 1 reply; 25+ messages in thread
From: Biju @ 2026-03-24 11:43 UTC (permalink / raw)
  To: Geert Uytterhoeven, Michael Turquette, Stephen Boyd, Magnus Damm
  Cc: Biju Das, linux-kernel, linux-renesas-soc, linux-clk,
	Prabhakar Mahadev Lad, Biju Das

From: Biju Das <biju.das.jz@bp.renesas.com>

The clock structure for RZ/G3L is almost identical to that of the RZ/G3S
SoC with more IP blocks such as LCDC, CRU, LVDS, and GPU.

Add minimal clock and reset entries required to boot the system on Renesas
RZ/G3L SMARC EVK and bind it with the RZ/G2L CPG core driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v7->v8:
 * No change
v6->v7:
 * Replaced r9a08g046_critical_resets->r9a08g046_crit_resets
v5->v6:
 * No change 
v4->v5:
 * No change
v3->v4:
 * Updated commit description
 * Updated LAST_DT_CORE_CLK with R9A08G046_USB_SCLK
 * Fixed typo 2->8 in dtable_4_128[].
 * Added critical reset table r9a08g046_critical_resets[]
 * Updated num_resets
 * Added crit_resets and num_crit_resets to r9a08g046_cpg_info.
v2->v3:
 * No change.
v1->v2:
 * Added CLK_ETH{0,1}_TXC_TX_CLK_IN and CLK_ETH{0,1}_RXC_RX_CLK_IN clocks.
 * Dropped R9A08G046_IA55_PCLK from critical clock list.
---
 drivers/clk/renesas/Kconfig         |   7 +-
 drivers/clk/renesas/Makefile        |   1 +
 drivers/clk/renesas/r9a08g046-cpg.c | 153 ++++++++++++++++++++++++++++
 drivers/clk/renesas/rzg2l-cpg.c     |   6 ++
 drivers/clk/renesas/rzg2l-cpg.h     |   1 +
 5 files changed, 167 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/renesas/r9a08g046-cpg.c

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 6a5a04664990..0203ecbb3882 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -39,6 +39,7 @@ config CLK_RENESAS
 	select CLK_R9A07G044 if ARCH_R9A07G044
 	select CLK_R9A07G054 if ARCH_R9A07G054
 	select CLK_R9A08G045 if ARCH_R9A08G045
+	select CLK_R9A08G046 if ARCH_R9A08G046
 	select CLK_R9A09G011 if ARCH_R9A09G011
 	select CLK_R9A09G047 if ARCH_R9A09G047
 	select CLK_R9A09G056 if ARCH_R9A09G056
@@ -194,6 +195,10 @@ config CLK_R9A08G045
 	bool "RZ/G3S clock support" if COMPILE_TEST
 	select CLK_RZG2L
 
+config CLK_R9A08G046
+	bool "RZ/G3L clock support" if COMPILE_TEST
+	select CLK_RZG2L
+
 config CLK_R9A09G011
 	bool "RZ/V2M clock support" if COMPILE_TEST
 	select CLK_RZG2L
@@ -250,7 +255,7 @@ config CLK_RCAR_USB2_CLOCK_SEL
 	  This is a driver for R-Car USB2 clock selector
 
 config CLK_RZG2L
-	bool "RZ/{G2L,G2UL,G3S,V2L} family clock support" if COMPILE_TEST
+	bool "RZ/{G2{L,UL},G3{S,L},V2L} family clock support" if COMPILE_TEST
 	select RESET_CONTROLLER
 
 config CLK_RZV2H
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index d28eb276a153..bd2bed91ab29 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_CLK_R9A07G043)		+= r9a07g043-cpg.o
 obj-$(CONFIG_CLK_R9A07G044)		+= r9a07g044-cpg.o
 obj-$(CONFIG_CLK_R9A07G054)		+= r9a07g044-cpg.o
 obj-$(CONFIG_CLK_R9A08G045)		+= r9a08g045-cpg.o
+obj-$(CONFIG_CLK_R9A08G046)		+= r9a08g046-cpg.o
 obj-$(CONFIG_CLK_R9A09G011)		+= r9a09g011-cpg.o
 obj-$(CONFIG_CLK_R9A09G047)		+= r9a09g047-cpg.o
 obj-$(CONFIG_CLK_R9A09G056)		+= r9a09g056-cpg.o
diff --git a/drivers/clk/renesas/r9a08g046-cpg.c b/drivers/clk/renesas/r9a08g046-cpg.c
new file mode 100644
index 000000000000..6c77afdd34ea
--- /dev/null
+++ b/drivers/clk/renesas/r9a08g046-cpg.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RZ/G3L CPG driver
+ *
+ * Copyright (C) 2026 Renesas Electronics Corp.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/clock/r9a08g046-cpg.h>
+
+#include "rzg2l-cpg.h"
+
+/* RZ/G3L Specific registers. */
+#define G3L_CPG_PL2_DDIV		(0x204)
+#define G3L_CPG_PL3_DDIV		(0x208)
+#define G3L_CLKDIVSTATUS		(0x280)
+
+/* RZ/G3L Specific division configuration.  */
+#define G3L_DIVPL2A		DDIV_PACK(G3L_CPG_PL2_DDIV, 0, 2)
+#define G3L_DIVPL2B		DDIV_PACK(G3L_CPG_PL2_DDIV, 4, 2)
+#define G3L_DIVPL3A		DDIV_PACK(G3L_CPG_PL3_DDIV, 0, 2)
+
+/* RZ/G3L Clock status configuration. */
+#define G3L_DIVPL2A_STS		DDIV_PACK(G3L_CLKDIVSTATUS, 4, 1)
+#define G3L_DIVPL2B_STS		DDIV_PACK(G3L_CLKDIVSTATUS, 5, 1)
+#define G3L_DIVPL3A_STS		DDIV_PACK(G3L_CLKDIVSTATUS, 8, 1)
+
+enum clk_ids {
+	/* Core Clock Outputs exported to DT */
+	LAST_DT_CORE_CLK = R9A08G046_USB_SCLK,
+
+	/* External Input Clocks */
+	CLK_EXTAL,
+	CLK_ETH0_TXC_TX_CLK_IN,
+	CLK_ETH0_RXC_RX_CLK_IN,
+	CLK_ETH1_TXC_TX_CLK_IN,
+	CLK_ETH1_RXC_RX_CLK_IN,
+
+	/* Internal Core Clocks */
+	CLK_PLL2,
+	CLK_PLL2_DIV2,
+	CLK_PLL3,
+	CLK_PLL3_DIV2,
+
+	/* Module Clocks */
+	MOD_CLK_BASE,
+};
+
+/* Divider tables */
+static const struct clk_div_table dtable_4_128[] = {
+	{ 0, 4 },
+	{ 1, 8 },
+	{ 2, 16 },
+	{ 3, 128 },
+	{ 0, 0 },
+};
+
+static const struct clk_div_table dtable_8_256[] = {
+	{ 0, 8 },
+	{ 1, 16 },
+	{ 2, 32 },
+	{ 3, 256 },
+	{ 0, 0 },
+};
+
+static const struct cpg_core_clk r9a08g046_core_clks[] __initconst = {
+	/* External Clock Inputs */
+	DEF_INPUT("extal", CLK_EXTAL),
+	DEF_INPUT("eth0_txc_tx_clk", CLK_ETH0_TXC_TX_CLK_IN),
+	DEF_INPUT("eth0_rxc_rx_clk", CLK_ETH0_RXC_RX_CLK_IN),
+	DEF_INPUT("eth1_txc_tx_clk", CLK_ETH1_TXC_TX_CLK_IN),
+	DEF_INPUT("eth1_rxc_rx_clk", CLK_ETH1_RXC_RX_CLK_IN),
+
+	/* Internal Core Clocks */
+	DEF_FIXED(".pll2", CLK_PLL2, CLK_EXTAL, 200, 3),
+	DEF_FIXED(".pll3", CLK_PLL3, CLK_EXTAL, 200, 3),
+	DEF_FIXED(".pll2_div2", CLK_PLL2_DIV2, CLK_PLL2, 1, 2),
+	DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 1, 2),
+
+	/* Core output clk */
+	DEF_G3S_DIV("P0", R9A08G046_CLK_P0, CLK_PLL2_DIV2, G3L_DIVPL2B, G3L_DIVPL2B_STS,
+		    dtable_8_256, 0, 0, 0, NULL),
+	DEF_G3S_DIV("P1", R9A08G046_CLK_P1, CLK_PLL3_DIV2, G3L_DIVPL3A, G3L_DIVPL3A_STS,
+		    dtable_4_128, 0, 0, 0, NULL),
+	DEF_G3S_DIV("P3", R9A08G046_CLK_P3, CLK_PLL2_DIV2, G3L_DIVPL2A, G3L_DIVPL2A_STS,
+		    dtable_4_128, 0, 0, 0, NULL),
+};
+
+static const struct rzg2l_mod_clk r9a08g046_mod_clks[] = {
+	DEF_MOD("gic_gicclk",		R9A08G046_GIC600_GICCLK, R9A08G046_CLK_P1, 0x514, 0,
+					MSTOP(BUS_PERI_COM, BIT(12))),
+	DEF_MOD("ia55_pclk",		R9A08G046_IA55_PCLK, R9A08G046_CLK_P0, 0x518, 0,
+					MSTOP(BUS_PERI_CPU, BIT(13))),
+	DEF_MOD("ia55_clk",		R9A08G046_IA55_CLK, R9A08G046_CLK_P1, 0x518, 1,
+					MSTOP(BUS_PERI_CPU, BIT(13))),
+	DEF_MOD("dmac_aclk",		R9A08G046_DMAC_ACLK, R9A08G046_CLK_P3, 0x52c, 0,
+					MSTOP(BUS_REG1, BIT(2))),
+	DEF_MOD("dmac_pclk",		R9A08G046_DMAC_PCLK, R9A08G046_CLK_P3, 0x52c, 1,
+					MSTOP(BUS_REG1, BIT(3))),
+	DEF_MOD("scif0_clk_pck",	R9A08G046_SCIF0_CLK_PCK, R9A08G046_CLK_P0, 0x584, 0,
+					MSTOP(BUS_MCPU2, BIT(1))),
+};
+
+static const struct rzg2l_reset r9a08g046_resets[] = {
+	DEF_RST(R9A08G046_GIC600_GICRESET_N, 0x814, 0),
+	DEF_RST(R9A08G046_GIC600_DBG_GICRESET_N, 0x814, 1),
+	DEF_RST(R9A08G046_IA55_RESETN, 0x818, 0),
+	DEF_RST(R9A08G046_DMAC_ARESETN, 0x82c, 0),
+	DEF_RST(R9A08G046_DMAC_RST_ASYNC, 0x82c, 1),
+	DEF_RST(R9A08G046_SCIF0_RST_SYSTEM_N, 0x884, 0),
+};
+
+static const unsigned int r9a08g046_crit_mod_clks[] __initconst = {
+	MOD_CLK_BASE + R9A08G046_GIC600_GICCLK,
+	MOD_CLK_BASE + R9A08G046_IA55_CLK,
+	MOD_CLK_BASE + R9A08G046_DMAC_ACLK,
+};
+
+static const unsigned int r9a08g046_crit_resets[] = {
+	R9A08G046_DMAC_ARESETN,
+	R9A08G046_DMAC_RST_ASYNC,
+};
+
+const struct rzg2l_cpg_info r9a08g046_cpg_info = {
+	/* Core Clocks */
+	.core_clks = r9a08g046_core_clks,
+	.num_core_clks = ARRAY_SIZE(r9a08g046_core_clks),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Critical Module Clocks */
+	.crit_mod_clks = r9a08g046_crit_mod_clks,
+	.num_crit_mod_clks = ARRAY_SIZE(r9a08g046_crit_mod_clks),
+
+	/* Module Clocks */
+	.mod_clks = r9a08g046_mod_clks,
+	.num_mod_clks = ARRAY_SIZE(r9a08g046_mod_clks),
+	.num_hw_mod_clks = R9A08G046_BSC_X_BCK_BSC + 1,
+
+	/* Resets */
+	.resets = r9a08g046_resets,
+	.num_resets = R9A08G046_BSC_X_PRESET_BSC + 1, /* Last reset ID + 1 */
+
+	/* Critical Resets */
+	.crit_resets = r9a08g046_crit_resets,
+	.num_crit_resets = ARRAY_SIZE(r9a08g046_crit_resets),
+
+	.has_clk_mon_regs = true,
+};
diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index 70228d8a2ef3..abfd8634d2be 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -2152,6 +2152,12 @@ static const struct of_device_id rzg2l_cpg_match[] = {
 		.data = &r9a08g045_cpg_info,
 	},
 #endif
+#ifdef CONFIG_CLK_R9A08G046
+	{
+		.compatible = "renesas,r9a08g046-cpg",
+		.data = &r9a08g046_cpg_info,
+	},
+#endif
 #ifdef CONFIG_CLK_R9A09G011
 	{
 		.compatible = "renesas,r9a09g011-cpg",
diff --git a/drivers/clk/renesas/rzg2l-cpg.h b/drivers/clk/renesas/rzg2l-cpg.h
index af0a003d93f7..10baf9e71a6e 100644
--- a/drivers/clk/renesas/rzg2l-cpg.h
+++ b/drivers/clk/renesas/rzg2l-cpg.h
@@ -316,6 +316,7 @@ extern const struct rzg2l_cpg_info r9a07g043_cpg_info;
 extern const struct rzg2l_cpg_info r9a07g044_cpg_info;
 extern const struct rzg2l_cpg_info r9a07g054_cpg_info;
 extern const struct rzg2l_cpg_info r9a08g045_cpg_info;
+extern const struct rzg2l_cpg_info r9a08g046_cpg_info;
 extern const struct rzg2l_cpg_info r9a09g011_cpg_info;
 
 int rzg2l_cpg_sd_clk_mux_notifier(struct notifier_block *nb, unsigned long event, void *data);
-- 
2.43.0


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v8 08/11] arm64: dts: renesas: Add initial DTSI for RZ/G3L SoC
  2026-03-24 11:43 [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform Biju
                   ` (6 preceding siblings ...)
  2026-03-24 11:43 ` [PATCH v8 07/11] clk: renesas: Add support for RZ/G3L SoC Biju
@ 2026-03-24 11:43 ` Biju
  2026-03-26 13:53   ` Geert Uytterhoeven
  2026-03-24 11:43 ` [PATCH v8 09/11] arm64: dts: renesas: Add initial support for RZ/G3L SMARC SoM Biju
                   ` (2 subsequent siblings)
  10 siblings, 1 reply; 25+ messages in thread
From: Biju @ 2026-03-24 11:43 UTC (permalink / raw)
  To: Geert Uytterhoeven, Magnus Damm, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley
  Cc: Biju Das, linux-renesas-soc, devicetree, linux-kernel,
	Prabhakar Mahadev Lad, Biju Das

From: Biju Das <biju.das.jz@bp.renesas.com>

Add the initial DTSI for the RZ/G3L SoC.
The files in this commit have the following meaning:
  - r9a08g046.dtsi:    RZ/G3L family SoC common parts
  - r9a08g046l48.dtsi: RZ/G3L R9A08G046L48 SoC-specific parts

Add placeholders to reuse the code for the Renesas SMARC II carrier
board.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v7->v8:
 * Fixed the typo RZ/G3E->RZ/G3L in r9a08g046l48.dtsi
v6->v7:
 * No change
v5->v6:
 * Dropped dma-ranges, bus-range and comment from the pcie device node
v4->v5:
 * No change
v3->v4:
 * Fixed typo R0A08G046L->R9A08G046L in commit description
 * Dropped R9A08G046L46 from commit description
 * Dropped unused audio_clk{1,2} andcan_clk device nodes
 * Reordered i2c device node and updated reg entries by using lower-case
   hexadecimal number
 * Added placeholder in pinctrl node
 * Dropped unused DMAC device node
 * Added pcie node with placeholder
v2->v3:
 * No change.
v1->v2:
 * Added external clocks eth{0,1}_txc_tx_clk and eth{0,1}_rxc_rx_clk
   as it needed for cpg as it is a clock source for mux.
 * Updated cpg node
---
 arch/arm64/boot/dts/renesas/r9a08g046.dtsi    | 212 ++++++++++++++++++
 arch/arm64/boot/dts/renesas/r9a08g046l48.dtsi |  13 ++
 2 files changed, 225 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a08g046.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a08g046l48.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r9a08g046.dtsi b/arch/arm64/boot/dts/renesas/r9a08g046.dtsi
new file mode 100644
index 000000000000..e030e785ea2a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a08g046.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G3L SoC
+ *
+ * Copyright (C) 2026 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r9a08g046-cpg.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "renesas,r9a08g046";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-level = <3>;
+		};
+	};
+
+	eth0_txc_tx_clk: eth0-txc-tx-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	eth0_rxc_rx_clk: eth0-rxc-rx-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	eth1_txc_tx_clk: eth1-txc-tx-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	eth1_rxc_rx_clk: eth1-rxc-rx-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extal_clk: extal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scif0: serial@100ac000 {
+			compatible = "renesas,scif-r9a08g046", "renesas,scif-r9a07g044";
+			reg = <0 0x100ac000 0 0x400>;
+			interrupts = <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A08G046_SCIF0_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G046_SCIF0_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@100ae000 {
+			reg = <0 0x100ae000 0 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* placeholder */
+		};
+
+		canfd: can@100c0000 {
+			reg = <0 0x100c0000 0 0x20000>;
+			/* placeholder */
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a08g046-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>,
+				 <&eth0_txc_tx_clk>, <&eth0_rxc_rx_clk>,
+				 <&eth1_txc_tx_clk>, <&eth1_rxc_rx_clk>;
+			clock-names = "extal",
+				      "eth0_txc_tx_clk", "eth0_rxc_rx_clk",
+				      "eth1_txc_tx_clk", "eth1_rxc_rx_clk";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@11020000 {
+			compatible = "renesas,r9a08g046-sysc";
+			reg = <0 0x11020000 0 0x10000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpm_int", "ca55stbydone_int",
+					  "cm33stbyr_int", "ca55_deny";
+		};
+
+		pinctrl: pinctrl@11030000 {
+			reg = <0 0x11030000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* placeholder */
+		};
+
+		sdhi1: mmc@11c10000 {
+			reg = <0x0 0x11c10000 0 0x10000>;
+			/* placeholder */
+		};
+
+		pcie: pcie@11e40000 {
+			reg = <0 0x11e40000 0 0x10000>;
+			ranges = <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			/* placeholder */
+
+			pcie_port0: pcie@0,0 {
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				ranges;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				/* placeholder */
+			};
+		};
+
+		gic: interrupt-controller@12400000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x12400000 0 0x20000>,
+			      <0x0 0x12440000 0 0x80000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a08g046l48.dtsi b/arch/arm64/boot/dts/renesas/r9a08g046l48.dtsi
new file mode 100644
index 000000000000..39b114172af5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a08g046l48.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G3L R9A08G046L48 SoC specific parts
+ *
+ * Copyright (C) 2026 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a08g046.dtsi"
+
+/ {
+	compatible = "renesas,r9a08g046l48", "renesas,r9a08g046";
+};
-- 
2.43.0


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v8 09/11] arm64: dts: renesas: Add initial support for RZ/G3L SMARC SoM
  2026-03-24 11:43 [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform Biju
                   ` (7 preceding siblings ...)
  2026-03-24 11:43 ` [PATCH v8 08/11] arm64: dts: renesas: Add initial DTSI " Biju
@ 2026-03-24 11:43 ` Biju
  2026-03-26 13:54   ` Geert Uytterhoeven
  2026-03-24 11:43 ` [PATCH v8 10/11] arm64: dts: renesas: renesas-smarc2: Move usb3 nodes to board DTS Biju
  2026-03-24 11:43 ` [PATCH v8 11/11] arm64: dts: renesas: Add initial device tree for RZ/G3L SMARC EVK board Biju
  10 siblings, 1 reply; 25+ messages in thread
From: Biju @ 2026-03-24 11:43 UTC (permalink / raw)
  To: Geert Uytterhoeven, Magnus Damm, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley
  Cc: Biju Das, linux-renesas-soc, devicetree, linux-kernel,
	Prabhakar Mahadev Lad, Biju Das

From: Biju Das <biju.das.jz@bp.renesas.com>

Add initial support for the RZ/G3L SMARC SoM with 2GB memory and
extal clk.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v7->v8:
 * No change
v6->v7:
 * No change
v5->v6:
 * No change
v4->v5:
 * No change
v3->v4:
 * Collected the tag.
v2->v3:
 * No change.
v1->v2:
 * Dropped gpio.h header file.
---
 .../boot/dts/renesas/rzg3l-smarc-som.dtsi     | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi

diff --git a/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi
new file mode 100644
index 000000000000..7c21afaee9bc
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for R9A08G046L48 SMARC SoM board.
+ *
+ * Copyright (C) 2026 Renesas Electronics Corp.
+ */
+
+/ {
+	compatible = "renesas,rzg3l-smarcm", "renesas,r9a08g046l48", "renesas,r9a08g046";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* First 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
-- 
2.43.0


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v8 10/11] arm64: dts: renesas: renesas-smarc2: Move usb3 nodes to board DTS
  2026-03-24 11:43 [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform Biju
                   ` (8 preceding siblings ...)
  2026-03-24 11:43 ` [PATCH v8 09/11] arm64: dts: renesas: Add initial support for RZ/G3L SMARC SoM Biju
@ 2026-03-24 11:43 ` Biju
  2026-03-26 13:54   ` Geert Uytterhoeven
  2026-03-24 11:43 ` [PATCH v8 11/11] arm64: dts: renesas: Add initial device tree for RZ/G3L SMARC EVK board Biju
  10 siblings, 1 reply; 25+ messages in thread
From: Biju @ 2026-03-24 11:43 UTC (permalink / raw)
  To: Geert Uytterhoeven, Magnus Damm, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley
  Cc: Biju Das, linux-renesas-soc, devicetree, linux-kernel,
	Prabhakar Mahadev Lad, Biju Das

From: Biju Das <biju.das.jz@bp.renesas.com>

The SMARC2 board DTSI is common to multiple SoCs. Move the USB3 nodes to
the board DTS, as some SoCs (e.g. RZ/G3{S,L}) do not support USB3.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v7->v8:
 * No change
v6->v7:
 * No change
v5->v6:
 * No change
v4->v5:
 * No change
v3->v4:
 * Updated commit description
 * Collected the tag
v2->v3:
 * No change
v1->v2:
 * No change
---
 arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts | 6 ++++++
 arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi    | 8 --------
 2 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
index 30ffd458f188..9d16c3117cb9 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
@@ -264,7 +264,13 @@ &sdhi1 {
 	vqmmc-supply = <&vqmmc_sd1_pvdd>;
 };
 
+&usb3_phy {
+	status = "okay";
+};
+
 &xhci {
 	pinctrl-0 = <&usb3_pins>;
 	pinctrl-names = "default";
+
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi b/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi
index b607b5d6c259..69c0101ff7f5 100644
--- a/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi
+++ b/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi
@@ -107,11 +107,3 @@ &sdhi1 {
 
 	status = "okay";
 };
-
-&usb3_phy {
-	status = "okay";
-};
-
-&xhci {
-	status = "okay";
-};
-- 
2.43.0


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v8 11/11] arm64: dts: renesas: Add initial device tree for RZ/G3L SMARC EVK board
  2026-03-24 11:43 [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform Biju
                   ` (9 preceding siblings ...)
  2026-03-24 11:43 ` [PATCH v8 10/11] arm64: dts: renesas: renesas-smarc2: Move usb3 nodes to board DTS Biju
@ 2026-03-24 11:43 ` Biju
  2026-03-26 13:55   ` Geert Uytterhoeven
  10 siblings, 1 reply; 25+ messages in thread
From: Biju @ 2026-03-24 11:43 UTC (permalink / raw)
  To: Geert Uytterhoeven, Magnus Damm, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley
  Cc: Biju Das, linux-renesas-soc, devicetree, linux-kernel,
	Prabhakar Mahadev Lad, Biju Das

From: Biju Das <biju.das.jz@bp.renesas.com>

Add the initial device tree for the Renesas RZ/G3L SMARC EVK board.

Added placeholders to avoid compilation error with the common code in
renesas-smarc2.dtsi.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v7->v8:
 * No change
v6->v7:
 * No change
v5->v6:
 * No change
v4->v5:
 * No change
v3->v4:
 * Collected the tag
v2->v3:
 * No change.
v1->v2:
 * Dropped scif node as it is already included in common platform
   file.
---
 arch/arm64/boot/dts/renesas/Makefile          |  2 +
 .../boot/dts/renesas/r9a08g046l48-smarc.dts   | 37 +++++++++++++++++++
 2 files changed, 39 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index d4dfb7fd973b..76df20d2fd29 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -179,6 +179,8 @@ dtb-$(CONFIG_ARCH_R9A08G045) += r9a08g045s33-smarc-pmod1-type-3a.dtbo
 r9a08g045s33-smarc-pmod1-type-3a-dtbs := r9a08g045s33-smarc.dtb r9a08g045s33-smarc-pmod1-type-3a.dtbo
 dtb-$(CONFIG_ARCH_R9A08G045) += r9a08g045s33-smarc-pmod1-type-3a.dtb
 
+dtb-$(CONFIG_ARCH_R9A08G046) += r9a08g046l48-smarc.dtb
+
 dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
 
 dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts b/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
new file mode 100644
index 000000000000..86db86335d5e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G3L SMARC EVK board
+ *
+ * Copyright (C) 2026 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/* Add place holder to avoid compilation error with renesas-smarc2.dtsi */
+#define KEY_1_GPIO		1
+#define KEY_2_GPIO		2
+#define KEY_3_GPIO		3
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "r9a08g046l48.dtsi"
+#include "rzg3l-smarc-som.dtsi"
+#include "renesas-smarc2.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK version 2 based on r9a08g046l48";
+	compatible = "renesas,smarc2-evk", "renesas,rzg3l-smarcm",
+		     "renesas,r9a08g046l48", "renesas,r9a08g046";
+
+	aliases {
+		serial3 = &scif0;
+	};
+};
+
+&keys {
+	status = "disabled";
+
+	/delete-node/ key-1;
+	/delete-node/ key-2;
+	/delete-node/ key-3;
+};
-- 
2.43.0


^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v8 01/11] dt-bindings: clock: Document RZ/G3L SoC
  2026-03-24 11:43 ` [PATCH v8 01/11] dt-bindings: clock: Document RZ/G3L SoC Biju
@ 2026-03-26 13:50   ` Geert Uytterhoeven
  2026-03-26 18:24   ` Geert Uytterhoeven
  1 sibling, 0 replies; 25+ messages in thread
From: Geert Uytterhoeven @ 2026-03-26 13:50 UTC (permalink / raw)
  To: Biju
  Cc: Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Magnus Damm, Biju Das,
	linux-renesas-soc, linux-clk, devicetree, linux-kernel,
	Prabhakar Mahadev Lad, Conor Dooley

On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> Document the device tree bindings for the Renesas RZ/G3L SoC Clock Pulse
> Generator (CPG). RZ/G3L CPG is similar to RZ/G2L CPG but has 5 clocks
> compared to 1 clock on other SoCs.
>
> Also define RZ/G3L (R9A08G046) Clock Pulse Generator Core Clocks, as
> listed in section 4.4.4.1 ("Block Diagram of the Clock System"), module
> clock outputs, as listed in section 4.4.2 ("Clock List r1.00") and add
> Reset definitions referring to registers CPG_RST_* in Section 4.4.3
> ("Register") of the RZ/G3L Hardware User's Manual (Rev.1.00 Oct, 2025).
>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> v7->v8:
>  * Fixed the R9A08G046_ADC1_ADCLK macro value 138->139.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in a branch shared by DTS and driver.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v8 02/11] clk: renesas: rzg2l-cpg: Add support for critical resets
  2026-03-24 11:43 ` [PATCH v8 02/11] clk: renesas: rzg2l-cpg: Add support for critical resets Biju
@ 2026-03-26 13:50   ` Geert Uytterhoeven
  0 siblings, 0 replies; 25+ messages in thread
From: Geert Uytterhoeven @ 2026-03-26 13:50 UTC (permalink / raw)
  To: Biju
  Cc: Michael Turquette, Stephen Boyd, Philipp Zabel, Biju Das,
	linux-renesas-soc, linux-clk, linux-kernel,
	Prabhakar Mahadev Lad

On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> Some reset lines must remain deasserted at all times after boot, as
> asserting them would disable critical system functionality with no owning
> driver to restore them. This mirrors the existing crit_mod_clks mechanism
> which protects critical module clocks from being disabled.
>
> On RZ/G2L family SoCs, the DMA reset must be remain deasserted for routing
> some peripheral interrupts to CPU.
>
> Add crit_resets and num_crit_resets fields to struct rzg2l_cpg_info to
> allow SoC-specific data tables to declare reset IDs that must never be
> asserted.
>
> Introduce rzg2l_cpg_deassert_crit_resets() to iterate over all critical
> resets and deassert them. Call it both at probe time and during resume to
> ensure critical peripherals are held out of reset after power-on and
> suspend/resume cycles.
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Thanks, will queue in renesas-clk for v7.1.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v8 03/11] clk: renesas: r9a07g04{3,4}/r9a08g045-cpg: Add critical reset entries
  2026-03-24 11:43 ` [PATCH v8 03/11] clk: renesas: r9a07g04{3,4}/r9a08g045-cpg: Add critical reset entries Biju
@ 2026-03-26 13:51   ` Geert Uytterhoeven
  0 siblings, 0 replies; 25+ messages in thread
From: Geert Uytterhoeven @ 2026-03-26 13:51 UTC (permalink / raw)
  To: Biju
  Cc: Michael Turquette, Stephen Boyd, Philipp Zabel, Biju Das,
	linux-renesas-soc, linux-clk, linux-kernel,
	Prabhakar Mahadev Lad

On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> The RZ/G2L SoC family requires DMA resets to be deasserted for routing
> some peripheral interrupts to the CPU. Asserting these resets after boot
> would silently break interrupt delivery with no driver to restore them.
>
> Mark the DMA resets as critical by adding them to the crit_resets table
> in the SoC-specific rzg2l_cpg_info for r9a07g043, r9a07g044, and
> r9a08g045, preventing __rzg2l_cpg_assert() from asserting them and
> ensuring they are deasserted during probe and resume.
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Thanks, will queue in renesas-clk for v7.1.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v8 04/11] clk: renesas: rzg2l-cpg: Add helper for mod clock enable/disable
  2026-03-24 11:43 ` [PATCH v8 04/11] clk: renesas: rzg2l-cpg: Add helper for mod clock enable/disable Biju
@ 2026-03-26 13:51   ` Geert Uytterhoeven
  0 siblings, 0 replies; 25+ messages in thread
From: Geert Uytterhoeven @ 2026-03-26 13:51 UTC (permalink / raw)
  To: Biju
  Cc: Michael Turquette, Stephen Boyd, Philipp Zabel, Biju Das,
	linux-renesas-soc, linux-clk, linux-kernel,
	Prabhakar Mahadev Lad

On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> Refactor rzg2l_mod_clock_endisable() by extracting its logic into a new
> helper function rzg2l_mod_clock_endisable_helper(), which accepts an
> additional set_mstop_state boolean parameter. This allows callers to
> control whether the module stop state is updated alongside the clock
> enable/disable operation. No functional change for existing callers.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-clk for v7.1.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v8 05/11] clk: renesas: rzg2l-cpg: Add rzg2l_mod_clock_init_mstop_helper()
  2026-03-24 11:43 ` [PATCH v8 05/11] clk: renesas: rzg2l-cpg: Add rzg2l_mod_clock_init_mstop_helper() Biju
@ 2026-03-26 13:52   ` Geert Uytterhoeven
  0 siblings, 0 replies; 25+ messages in thread
From: Geert Uytterhoeven @ 2026-03-26 13:52 UTC (permalink / raw)
  To: Biju
  Cc: Michael Turquette, Stephen Boyd, Philipp Zabel, Biju Das,
	linux-renesas-soc, linux-clk, linux-kernel,
	Prabhakar Mahadev Lad

On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> Refactor the mstop initialisation logic in rzg2l_mod_clock_init_mstop()
> into a dedicated helper function rzg2l_mod_clock_init_mstop_helper(). This
> decouples the logic for setting module stop state on disabled clocks from
> the iteration loop, allowing it to be reused during resume to re-enable
> critical clocks.
>
> No functional change.
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Thanks, will queue in renesas-clk for v7.1.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v8 06/11] clk: renesas: rzg2l-cpg: Re-enable critical module clocks during resume
  2026-03-24 11:43 ` [PATCH v8 06/11] clk: renesas: rzg2l-cpg: Re-enable critical module clocks during resume Biju
@ 2026-03-26 13:52   ` Geert Uytterhoeven
  0 siblings, 0 replies; 25+ messages in thread
From: Geert Uytterhoeven @ 2026-03-26 13:52 UTC (permalink / raw)
  To: Biju
  Cc: Michael Turquette, Stephen Boyd, Philipp Zabel, Biju Das,
	linux-kernel, linux-renesas-soc, linux-clk,
	Prabhakar Mahadev Lad

On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> After a suspend/resume cycle, critical module clocks (CLK_IS_CRITICAL) may
> be left disabled as there is no owning driver to restore them, unlike
> regular clocks.
> Add rzg2l_mod_enable_crit_clock_init_mstop() which walks all module clocks
> on resume, re-enables any critical clock found disabled, and then restores
> the MSTOP state for clocks that have one via the existing helper. This
> replaces the direct call to rzg2l_mod_clock_init_mstop() in
> rzg2l_cpg_resume(), preserving the correct clock-before-MSTOP restore
> ordering.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> v7->v8:
>  * Updated comment in rzg2l_mod_clock_init_mstop_helper() as resume()
>    calls this function.
>  * To avoid setting module state twice and also not to update the initial
>    mstop state for the critical clocks state during probe, replaced
>    rzg2l_mod_clock_endisable()->rzg2l_mod_clock_endisable_helper().

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-clk for v7.1.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v8 07/11] clk: renesas: Add support for RZ/G3L SoC
  2026-03-24 11:43 ` [PATCH v8 07/11] clk: renesas: Add support for RZ/G3L SoC Biju
@ 2026-03-26 13:53   ` Geert Uytterhoeven
  0 siblings, 0 replies; 25+ messages in thread
From: Geert Uytterhoeven @ 2026-03-26 13:53 UTC (permalink / raw)
  To: Biju
  Cc: Michael Turquette, Stephen Boyd, Magnus Damm, Biju Das,
	linux-kernel, linux-renesas-soc, linux-clk,
	Prabhakar Mahadev Lad

On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> The clock structure for RZ/G3L is almost identical to that of the RZ/G3S
> SoC with more IP blocks such as LCDC, CRU, LVDS, and GPU.
>
> Add minimal clock and reset entries required to boot the system on Renesas
> RZ/G3L SMARC EVK and bind it with the RZ/G2L CPG core driver.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-clk for v7.1.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v8 08/11] arm64: dts: renesas: Add initial DTSI for RZ/G3L SoC
  2026-03-24 11:43 ` [PATCH v8 08/11] arm64: dts: renesas: Add initial DTSI " Biju
@ 2026-03-26 13:53   ` Geert Uytterhoeven
  0 siblings, 0 replies; 25+ messages in thread
From: Geert Uytterhoeven @ 2026-03-26 13:53 UTC (permalink / raw)
  To: Biju
  Cc: Magnus Damm, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Biju Das, linux-renesas-soc, devicetree, linux-kernel,
	Prabhakar Mahadev Lad

On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> Add the initial DTSI for the RZ/G3L SoC.
> The files in this commit have the following meaning:
>   - r9a08g046.dtsi:    RZ/G3L family SoC common parts
>   - r9a08g046l48.dtsi: RZ/G3L R9A08G046L48 SoC-specific parts
>
> Add placeholders to reuse the code for the Renesas SMARC II carrier
> board.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v7.1.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v8 09/11] arm64: dts: renesas: Add initial support for RZ/G3L SMARC SoM
  2026-03-24 11:43 ` [PATCH v8 09/11] arm64: dts: renesas: Add initial support for RZ/G3L SMARC SoM Biju
@ 2026-03-26 13:54   ` Geert Uytterhoeven
  0 siblings, 0 replies; 25+ messages in thread
From: Geert Uytterhoeven @ 2026-03-26 13:54 UTC (permalink / raw)
  To: Biju
  Cc: Magnus Damm, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Biju Das, linux-renesas-soc, devicetree, linux-kernel,
	Prabhakar Mahadev Lad

On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> Add initial support for the RZ/G3L SMARC SoM with 2GB memory and
> extal clk.
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Thanks, will queue in renesas-devel for v7.1.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v8 10/11] arm64: dts: renesas: renesas-smarc2: Move usb3 nodes to board DTS
  2026-03-24 11:43 ` [PATCH v8 10/11] arm64: dts: renesas: renesas-smarc2: Move usb3 nodes to board DTS Biju
@ 2026-03-26 13:54   ` Geert Uytterhoeven
  0 siblings, 0 replies; 25+ messages in thread
From: Geert Uytterhoeven @ 2026-03-26 13:54 UTC (permalink / raw)
  To: Biju
  Cc: Magnus Damm, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Biju Das, linux-renesas-soc, devicetree, linux-kernel,
	Prabhakar Mahadev Lad

On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> The SMARC2 board DTSI is common to multiple SoCs. Move the USB3 nodes to
> the board DTS, as some SoCs (e.g. RZ/G3{S,L}) do not support USB3.
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Thanks, will queue in renesas-devel for v7.1.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v8 11/11] arm64: dts: renesas: Add initial device tree for RZ/G3L SMARC EVK board
  2026-03-24 11:43 ` [PATCH v8 11/11] arm64: dts: renesas: Add initial device tree for RZ/G3L SMARC EVK board Biju
@ 2026-03-26 13:55   ` Geert Uytterhoeven
  0 siblings, 0 replies; 25+ messages in thread
From: Geert Uytterhoeven @ 2026-03-26 13:55 UTC (permalink / raw)
  To: Biju
  Cc: Magnus Damm, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Biju Das, linux-renesas-soc, devicetree, linux-kernel,
	Prabhakar Mahadev Lad

On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> Add the initial device tree for the Renesas RZ/G3L SMARC EVK board.
>
> Added placeholders to avoid compilation error with the common code in
> renesas-smarc2.dtsi.
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v7.1.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v8 01/11] dt-bindings: clock: Document RZ/G3L SoC
  2026-03-24 11:43 ` [PATCH v8 01/11] dt-bindings: clock: Document RZ/G3L SoC Biju
  2026-03-26 13:50   ` Geert Uytterhoeven
@ 2026-03-26 18:24   ` Geert Uytterhoeven
  2026-03-26 18:27     ` Biju Das
  1 sibling, 1 reply; 25+ messages in thread
From: Geert Uytterhoeven @ 2026-03-26 18:24 UTC (permalink / raw)
  To: Biju
  Cc: Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Magnus Damm, Biju Das,
	linux-renesas-soc, linux-clk, devicetree, linux-kernel,
	Prabhakar Mahadev Lad, Conor Dooley

Hi Biju,

On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> Document the device tree bindings for the Renesas RZ/G3L SoC Clock Pulse
> Generator (CPG). RZ/G3L CPG is similar to RZ/G2L CPG but has 5 clocks
> compared to 1 clock on other SoCs.
>
> Also define RZ/G3L (R9A08G046) Clock Pulse Generator Core Clocks, as
> listed in section 4.4.4.1 ("Block Diagram of the Clock System"), module
> clock outputs, as listed in section 4.4.2 ("Clock List r1.00") and add
> Reset definitions referring to registers CPG_RST_* in Section 4.4.3
> ("Register") of the RZ/G3L Hardware User's Manual (Rev.1.00 Oct, 2025).
>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

> --- /dev/null
> +++ b/include/dt-bindings/clock/r9a08g046-cpg.h

Missing "renesas," prefix.

> @@ -0,0 +1,342 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> + *
> + * Copyright (C) 2026 Renesas Electronics Corp.
> + */
> +#ifndef __DT_BINDINGS_CLOCK_R9A08G046_CPG_H__
> +#define __DT_BINDINGS_CLOCK_R9A08G046_CPG_H__

Missing RENESAS_ infix.

Will fix accordingly while applying.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* RE: [PATCH v8 01/11] dt-bindings: clock: Document RZ/G3L SoC
  2026-03-26 18:24   ` Geert Uytterhoeven
@ 2026-03-26 18:27     ` Biju Das
  0 siblings, 0 replies; 25+ messages in thread
From: Biju Das @ 2026-03-26 18:27 UTC (permalink / raw)
  To: geert, biju.das.au
  Cc: Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, magnus.damm,
	linux-renesas-soc, linux-clk, devicetree, linux-kernel,
	Prabhakar Mahadev Lad, Conor Dooley

Hi Geert,

> -----Original Message-----
> From: Geert Uytterhoeven <geert@linux-m68k.org>
> Sent: 26 March 2026 18:24
> Subject: Re: [PATCH v8 01/11] dt-bindings: clock: Document RZ/G3L SoC
> 
> Hi Biju,
> 
> On Tue, 24 Mar 2026 at 12:43, Biju <biju.das.au@gmail.com> wrote:
> > From: Biju Das <biju.das.jz@bp.renesas.com>
> >
> > Document the device tree bindings for the Renesas RZ/G3L SoC Clock
> > Pulse Generator (CPG). RZ/G3L CPG is similar to RZ/G2L CPG but has 5
> > clocks compared to 1 clock on other SoCs.
> >
> > Also define RZ/G3L (R9A08G046) Clock Pulse Generator Core Clocks, as
> > listed in section 4.4.4.1 ("Block Diagram of the Clock System"),
> > module clock outputs, as listed in section 4.4.2 ("Clock List r1.00")
> > and add Reset definitions referring to registers CPG_RST_* in Section
> > 4.4.3
> > ("Register") of the RZ/G3L Hardware User's Manual (Rev.1.00 Oct, 2025).
> >
> > Acked-by: Conor Dooley <conor.dooley@microchip.com>
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> 
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/r9a08g046-cpg.h
> 
> Missing "renesas," prefix.

Oops, missed it.

> 
> > @@ -0,0 +1,342 @@
> > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > + *
> > + * Copyright (C) 2026 Renesas Electronics Corp.
> > + */
> > +#ifndef __DT_BINDINGS_CLOCK_R9A08G046_CPG_H__
> > +#define __DT_BINDINGS_CLOCK_R9A08G046_CPG_H__
> 
> Missing RENESAS_ infix.
> 
> Will fix accordingly while applying.

Thank you for taking care.

Cheers,
Biju



^ permalink raw reply	[flat|nested] 25+ messages in thread

end of thread, other threads:[~2026-03-26 18:27 UTC | newest]

Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-03-24 11:43 [PATCH v8 00/11] Add support for Renesas RZ/G3L SoC and SMARC-EVK platform Biju
2026-03-24 11:43 ` [PATCH v8 01/11] dt-bindings: clock: Document RZ/G3L SoC Biju
2026-03-26 13:50   ` Geert Uytterhoeven
2026-03-26 18:24   ` Geert Uytterhoeven
2026-03-26 18:27     ` Biju Das
2026-03-24 11:43 ` [PATCH v8 02/11] clk: renesas: rzg2l-cpg: Add support for critical resets Biju
2026-03-26 13:50   ` Geert Uytterhoeven
2026-03-24 11:43 ` [PATCH v8 03/11] clk: renesas: r9a07g04{3,4}/r9a08g045-cpg: Add critical reset entries Biju
2026-03-26 13:51   ` Geert Uytterhoeven
2026-03-24 11:43 ` [PATCH v8 04/11] clk: renesas: rzg2l-cpg: Add helper for mod clock enable/disable Biju
2026-03-26 13:51   ` Geert Uytterhoeven
2026-03-24 11:43 ` [PATCH v8 05/11] clk: renesas: rzg2l-cpg: Add rzg2l_mod_clock_init_mstop_helper() Biju
2026-03-26 13:52   ` Geert Uytterhoeven
2026-03-24 11:43 ` [PATCH v8 06/11] clk: renesas: rzg2l-cpg: Re-enable critical module clocks during resume Biju
2026-03-26 13:52   ` Geert Uytterhoeven
2026-03-24 11:43 ` [PATCH v8 07/11] clk: renesas: Add support for RZ/G3L SoC Biju
2026-03-26 13:53   ` Geert Uytterhoeven
2026-03-24 11:43 ` [PATCH v8 08/11] arm64: dts: renesas: Add initial DTSI " Biju
2026-03-26 13:53   ` Geert Uytterhoeven
2026-03-24 11:43 ` [PATCH v8 09/11] arm64: dts: renesas: Add initial support for RZ/G3L SMARC SoM Biju
2026-03-26 13:54   ` Geert Uytterhoeven
2026-03-24 11:43 ` [PATCH v8 10/11] arm64: dts: renesas: renesas-smarc2: Move usb3 nodes to board DTS Biju
2026-03-26 13:54   ` Geert Uytterhoeven
2026-03-24 11:43 ` [PATCH v8 11/11] arm64: dts: renesas: Add initial device tree for RZ/G3L SMARC EVK board Biju
2026-03-26 13:55   ` Geert Uytterhoeven

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®