From: Philippe Ombredanne <pombredanne@nexb.com>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>,
Ohad Ben-Cohen <ohad@wizery.com>,
Arun Kumar Neelakantam <aneela@codeaurora.org>,
Chris Lew <clew@codeaurora.org>,
LKML <linux-kernel@vger.kernel.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-remoteproc@vger.kernel.org
Subject: Re: [PATCH v5 0/5] In-kernel QMI helpers and sysmon
Date: Thu, 7 Dec 2017 11:20:02 +0100 [thread overview]
Message-ID: <CAOFm3uEG9kXLXMLSp-R94SncNxCOh1oFudKvnPVfxkbzy-3u2Q@mail.gmail.com> (raw)
In-Reply-To: <20171205174310.15799-1-bjorn.andersson@linaro.org>
On Tue, Dec 5, 2017 at 6:43 PM, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
> This series introduces a helper library for drivers that needs to implement
> clients or services in the kernel for communicating with QMI encoded messages.
>
> This is used by a set of drivers in order to implement control signaling that
> needs to happen between a driver and a service on a remote processor, such as
> the synchronization of states during a remoteproc shutdown/restart; as seen in
> the sysmon implementation.
>
> Finally a sample driver provides an implementation of the "test" protocol,
> which is a service typically implemented by Qualcomm remoteproc firmware.
>
> Changes since v4:
> - Use SPDX headers
>
> Changes since v3:
> - Don't call QMI handler for response type messages without known txn
> - Kerneldoc updates
> - Style updates
>
> Changes since v2:
> - Fix reported typos
> - Checkpatch fixes
> - Use non-gpl EXPORT_SYMBOL
>
> Changes since v1:
> - Lot of modifications to QMI interface, from feedback and implementation and
> testing of sysmon.
> - Added sysmon driver.
> - Added patch for remoteproc to pass gracefulness on subdev remove.
> - QRTR patches part of v1 was merged separately
>
> Bjorn Andersson (5):
> soc: qcom: Introduce QMI encoder/decoder
> soc: qcom: Introduce QMI helpers
> remoteproc: Pass type of shutdown to subdev remove
> remoteproc: qcom: Introduce sysmon
> samples: Introduce Qualcomm QMI sample client
>
> drivers/remoteproc/Kconfig | 17 +
> drivers/remoteproc/Makefile | 1 +
> drivers/remoteproc/qcom_adsp_pil.c | 12 +
> drivers/remoteproc/qcom_common.c | 6 +-
> drivers/remoteproc/qcom_common.h | 21 +
> drivers/remoteproc/qcom_q6v5_pil.c | 3 +
> drivers/remoteproc/qcom_sysmon.c | 579 ++++++++++++++++++++++++
> drivers/remoteproc/qcom_wcnss.c | 4 +
> drivers/remoteproc/remoteproc_core.c | 18 +-
> drivers/soc/qcom/Kconfig | 9 +
> drivers/soc/qcom/Makefile | 2 +
> drivers/soc/qcom/qmi_encdec.c | 816 +++++++++++++++++++++++++++++++++
> drivers/soc/qcom/qmi_interface.c | 848 +++++++++++++++++++++++++++++++++++
> include/linux/remoteproc.h | 4 +-
> include/linux/soc/qcom/qmi.h | 271 +++++++++++
> samples/Kconfig | 9 +
> samples/Makefile | 2 +-
> samples/qmi/Makefile | 1 +
> samples/qmi/qmi_sample_client.c | 622 +++++++++++++++++++++++++
> 19 files changed, 3230 insertions(+), 15 deletions(-)
> create mode 100644 drivers/remoteproc/qcom_sysmon.c
> create mode 100644 drivers/soc/qcom/qmi_encdec.c
> create mode 100644 drivers/soc/qcom/qmi_interface.c
> create mode 100644 include/linux/soc/qcom/qmi.h
> create mode 100644 samples/qmi/Makefile
> create mode 100644 samples/qmi/qmi_sample_client.c
>
> --
> 2.15.0
>
For this patch series and the use of SPDX ids: Thanks!
Acked-by: Philippe Ombredanne <pombredanne@nexB.com>
prev parent reply other threads:[~2017-12-07 10:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-05 17:43 Bjorn Andersson
2017-12-05 17:43 ` [PATCH v5 1/5] soc: qcom: Introduce QMI encoder/decoder Bjorn Andersson
2017-12-05 22:03 ` Joe Perches
2017-12-05 17:43 ` [PATCH v5 2/5] soc: qcom: Introduce QMI helpers Bjorn Andersson
2017-12-05 17:43 ` [PATCH v5 3/5] remoteproc: Pass type of shutdown to subdev remove Bjorn Andersson
2017-12-05 17:43 ` [PATCH v5 4/5] remoteproc: qcom: Introduce sysmon Bjorn Andersson
2018-03-02 13:48 ` Jitendra Sharma
2017-12-05 17:43 ` [PATCH v5 5/5] samples: Introduce Qualcomm QMI sample client Bjorn Andersson
2017-12-07 10:20 ` Philippe Ombredanne [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAOFm3uEG9kXLXMLSp-R94SncNxCOh1oFudKvnPVfxkbzy-3u2Q@mail.gmail.com \
--to=pombredanne@nexb.com \
--cc=andy.gross@linaro.org \
--cc=aneela@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=clew@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=ohad@wizery.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®