From: "Allen Martin" <AMartin@nvidia.com>
To: <ross@datscreative.com.au>, "Len Brown" <len.brown@intel.com>,
<a.verweij@student.tudelft.nl>
Cc: "Jesse Allen" <the3dfxdude@hotmail.com>,
"Prakash K. Cheemplavam" <PrakashKC@gmx.de>,
"Craig Bradney" <cbradney@zip.com.au>,
<christian.kroener@tu-harburg.de>, <linux-kernel@vger.kernel.org>,
"Maciej W. Rozycki" <macro@ds2.pg.gda.pl>,
"Jamie Lokier" <jamie@shareable.org>,
"Daniel Drake" <dan@reactivated.net>,
"Ian Kumlien" <pomac@vapor.com>
Subject: RE: IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5
Date: Mon, 3 May 2004 01:08:06 -0700 [thread overview]
Message-ID: <DCB9B7AA2CAB7F418919D7B59EE45BAF49FC23@mail-sc-6-bk.nvidia.com> (raw)
> I also recollect that Windows had lockups with nforce2 for a while
> depending
> whether you ran the Nvidia or Microsoft driver.
> http://lkml.org/lkml/2003/12/13/5
> Anybody got the inside running on that one and what was different
between
> the
> two drivers?
There were some ATAPI device detection problems in some of the earlier
Windows nForce IDE drivers that would cause lockups during boot for some
people depending on what type of devices were attached.
There's never been any reports of Windows hangs that have been root
caused to C1 disconnects that I'm aware of.
-Allen
next reply other threads:[~2004-05-03 8:08 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-03 8:08 Allen Martin [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-05-04 20:38 Jesse Allen
2004-05-04 21:14 ` Craig Bradney
2004-05-03 22:09 Allen Martin
2004-05-03 23:11 ` Bartlomiej Zolnierkiewicz
2004-05-04 8:28 ` Prakash K. Cheemplavam
2004-05-04 21:10 ` Jeff Garzik
2004-05-04 21:29 ` Bartlomiej Zolnierkiewicz
2004-05-05 12:14 ` Ross Dickson
2004-05-05 12:27 ` Ian Kumlien
2004-05-05 13:12 ` Ross Dickson
2004-05-05 13:23 ` Ian Kumlien
2004-05-05 12:58 ` Maciej W. Rozycki
2004-05-05 12:48 ` Patrick Dreker
2004-05-05 13:34 ` Patrick Dreker
2004-05-05 11:24 ` Ross Dickson
2004-05-05 12:18 ` Ian Kumlien
2004-05-05 12:52 ` Ross Dickson
2004-05-05 13:08 ` Ian Kumlien
2004-05-06 1:50 ` Jesse Allen
2004-04-23 1:30 Jesse Allen
2004-05-07 4:47 ` Richard James
2004-05-07 7:13 ` Craig Bradney
2004-05-08 5:33 ` Richard James
[not found] <1KkKQ-2v9-9@gated-at.bofh.it>
[not found] ` <1Kqdx-6E1-5@gated-at.bofh.it>
[not found] ` <1KH4I-3W9-11@gated-at.bofh.it>
[not found] ` <1LgOQ-7px-3@gated-at.bofh.it>
[not found] ` <1LlEY-36q-11@gated-at.bofh.it>
2004-04-15 23:07 ` Andi Kleen
2004-04-21 22:00 ` Len Brown
2004-04-13 1:17 IO-APIC on nforce2 Ross Dickson
2004-04-13 7:03 ` Ross Dickson
2004-04-14 1:02 ` IO-APIC on nforce2 [PATCH] Len Brown
2004-04-15 15:10 ` IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5 Ross Dickson
2004-04-15 20:17 ` Len Brown
2004-04-15 21:04 ` Craig Bradney
2004-04-21 20:22 ` Len Brown
2004-04-21 20:33 ` Ian Kumlien
2004-04-21 20:45 ` Craig Bradney
2004-04-21 21:28 ` Prakash K. Cheemplavam
2004-04-21 22:41 ` Len Brown
2004-04-22 7:26 ` Prakash K. Cheemplavam
2004-04-22 14:58 ` Len Brown
2004-04-22 8:45 ` Craig Bradney
2004-04-22 15:03 ` Len Brown
2004-04-22 20:50 ` Craig Bradney
2004-04-22 8:50 ` Arjen Verweij
2004-04-22 16:39 ` Jesse Allen
2004-04-22 17:21 ` Len Brown
2004-04-22 21:29 ` Len Brown
2004-04-23 8:48 ` Prakash K. Cheemplavam
2004-04-23 9:01 ` Arjen Verweij
2004-04-23 9:08 ` Prakash K. Cheemplavam
2004-04-23 9:11 ` Prakash K. Cheemplavam
2004-04-23 12:18 ` Maciej W. Rozycki
2004-04-26 11:41 ` Ross Dickson
2004-04-27 17:02 ` Arjen Verweij
2004-04-27 17:35 ` Ian Kumlien
2004-04-27 18:00 ` Len Brown
2004-04-27 18:24 ` Arjen Verweij
2004-04-27 18:51 ` Jussi Laako
2004-04-28 11:33 ` Ross Dickson
2004-04-28 20:59 ` Jesse Allen
2004-04-29 11:44 ` Ross Dickson
2004-04-29 11:54 ` Maciej W. Rozycki
2004-04-29 12:00 ` Jamie Lokier
2004-04-29 12:26 ` Maciej W. Rozycki
2004-04-29 11:57 ` Jamie Lokier
2004-04-29 12:16 ` Craig Bradney
2004-04-29 20:24 ` Jesse Allen
2004-04-29 20:31 ` Prakash K. Cheemplavam
2004-05-03 20:45 ` Jesse Allen
2004-05-17 15:26 ` Prakash K. Cheemplavam
2004-05-17 19:32 ` Craig Bradney
2004-05-17 19:37 ` Prakash K. Cheemplavam
2004-05-17 19:57 ` Craig Bradney
2004-04-27 21:31 ` Prakash K. Cheemplavam
2004-04-28 11:26 ` Prakash K. Cheemplavam
2004-05-01 6:51 ` Prakash K. Cheemplavam
2004-04-15 21:56 ` Arjen Verweij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DCB9B7AA2CAB7F418919D7B59EE45BAF49FC23@mail-sc-6-bk.nvidia.com \
--to=amartin@nvidia.com \
--cc=PrakashKC@gmx.de \
--cc=a.verweij@student.tudelft.nl \
--cc=cbradney@zip.com.au \
--cc=christian.kroener@tu-harburg.de \
--cc=dan@reactivated.net \
--cc=jamie@shareable.org \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=macro@ds2.pg.gda.pl \
--cc=pomac@vapor.com \
--cc=ross@datscreative.com.au \
--cc=the3dfxdude@hotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®