mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH 1/2] dt-bindings: display: Use consistent indentation in the example
@ 2026-09-13 12:33 Krzysztof Kozlowski
  2026-09-13 12:33 ` [PATCH 2/2] dt-bindings: display/msm: " Krzysztof Kozlowski
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2026-09-13 12:33 UTC (permalink / raw)
  To: Chen-Yu Tsai, David Airlie, Simona Vetter, Maarten Lankhorst,
	Maxime Ripard, Thomas Zimmermann, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Jernej Skrabec,
	Samuel Holland, Liu Ying, Andrzej Hajda, Neil Armstrong,
	Robert Foss, Laurent Pinchart, Jonas Karlman, Luca Ceresoli,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	Francesco Dolcini, Philipp Zabel, Chun-Kuang Hu, Rob Clark,
	Dmitry Baryshkov, Abhinav Kumar, Jessica Zhang, Sean Paul,
	Marijn Suijten, Marcus Folkesson, Maxime Coquelin,
	Alexandre Torgue, Yannick Fertre, Raphael Gallais-Pou,
	Philippe Cornu, Matthias Brugger, AngeloGioacchino Del Regno,
	Adrien Grassein, Russell King, Simha BN, CK Hu, Jitao shi,
	Yongxing Mou, Abel Vesa, Chris Morgan, Martinez Canillas,
	dri-devel, devicetree, linux-arm-kernel, linux-sunxi,
	linux-kernel, imx, linux-mediatek, linux-arm-msm, freedreno,
	linux-stm32
  Cc: Krzysztof Kozlowski

Correct indentation in the examples to consistent 2- or 4-spaces
indentation to fix dt-check-style warnings ("example 0
[indent-consistent] indent mismatch ...").  Preferred is 4-spaces, but
re-indenting entire example just for that is too much churn.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 10 +--
 .../display/bridge/fsl,imx8qxp-pxl2dpi.yaml   |  4 +-
 .../display/bridge/lontium,lt8912b.yaml       |  8 +-
 .../megachips,stdp2690-ge-b850v3-fw.yaml      |  2 +-
 .../bindings/display/bridge/nxp,tda998x.yaml  |  2 +-
 .../display/bridge/toshiba,tc358764.yaml      |  2 +-
 .../display/bridge/toshiba,tc358775.yaml      | 12 +--
 .../bindings/display/himax,hx8357.yaml        |  2 +-
 .../bindings/display/imx/fsl,imx-lcdc.yaml    |  2 +-
 .../bindings/display/imx/fsl,imx6q-ldb.yaml   | 54 +++++------
 .../display/mediatek/mediatek,ethdr.yaml      | 90 +++++++++----------
 .../display/mediatek/mediatek,hdmi.yaml       | 24 ++---
 .../display/panel/samsung,ams495qa01.yaml     |  2 +-
 .../bindings/display/sitronix,st7567.yaml     |  4 +-
 .../bindings/display/st,stm32-dsi.yaml        | 46 +++++-----
 .../bindings/display/st,stm32-ltdc.yaml       |  6 +-
 .../bindings/display/st,stm32mp25-lvds.yaml   |  4 +-
 17 files changed, 137 insertions(+), 137 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
index c731fbdc2fe0..7b11cb5e5f6d 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -119,11 +119,11 @@ examples:
         #size-cells = <0>;
 
         panel@0 {
-                compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
-                reg = <0>;
-                power-supply = <&reg_display>;
-                reset-gpios = <&r_pio 0 5 1>; /* PL05 */
-                backlight = <&pwm_bl>;
+            compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+            reg = <0>;
+            power-supply = <&reg_display>;
+            reset-gpios = <&r_pio 0 5 1>; /* PL05 */
+            backlight = <&pwm_bl>;
         };
 
         port {
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
index e4e77fad05f1..af9ad07ef08b 100644
--- a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
@@ -84,8 +84,8 @@ examples:
                 };
 
                 mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 {
-                     reg = <1>;
-                     remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                    reg = <1>;
+                    remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>;
                 };
             };
 
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
index 988351f3cd01..2d2dc9c046fb 100644
--- a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
@@ -107,11 +107,11 @@ examples:
           };
 
           port@1 {
-              reg = <1>;
+            reg = <1>;
 
-              endpoint {
-                  remote-endpoint = <&hdmi_in>;
-              };
+            endpoint {
+              remote-endpoint = <&hdmi_in>;
+            };
           };
         };
       };
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml b/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml
index dfa6ff6f115e..74539132bf94 100644
--- a/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml
@@ -104,7 +104,7 @@ examples:
                     endpoint {
                         remote-endpoint = <&stdp2690_in>;
                     };
-               };
+                };
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
index 1205c8e9de32..0ad55ff8e330 100644
--- a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
@@ -106,7 +106,7 @@ examples:
             video-ports = <0x230145>;
 
             #sound-dai-cells = <1>;
-                         /* DAI-format / AP_ENA reg value */
+            /* DAI-format / AP_ENA reg value */
             audio-ports = <TDA998x_SPDIF 0x04>,
                           <TDA998x_I2S 0x03>;
 
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
index 866607400514..23c5b254426b 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
@@ -81,7 +81,7 @@ examples:
                 port@1 {
                     reg = <1>;
                     lvds_ep: endpoint {
-                      remote-endpoint = <&panel_ep>;
+                        remote-endpoint = <&panel_ep>;
                     };
                 };
             };
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
index 258dd9cfd770..8a0d8a66a9b0 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -161,9 +161,9 @@ examples:
                 dsi0_out: endpoint {
                     remote-endpoint = <&d2l_in_test>;
                 };
-             };
-         };
-     };
+            };
+        };
+    };
 
   - |
     /* For dual-link LVDS display panel */
@@ -227,7 +227,7 @@ examples:
                 dsi0_out_dual: endpoint {
                     remote-endpoint = <&d2l_in_dual>;
                 };
-             };
-         };
-     };
+            };
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/display/himax,hx8357.yaml b/Documentation/devicetree/bindings/display/himax,hx8357.yaml
index 34c3b89bf003..bafcd4418d5a 100644
--- a/Documentation/devicetree/bindings/display/himax,hx8357.yaml
+++ b/Documentation/devicetree/bindings/display/himax,hx8357.yaml
@@ -74,5 +74,5 @@ examples:
             dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
             rotation = <90>;
             backlight = <&backlight>;
-       };
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml
index c2b29622bceb..84610b5690c4 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml
@@ -110,7 +110,7 @@ examples:
 
         port {
             parallel_out: endpoint {
-              remote-endpoint = <&panel_in>;
+                remote-endpoint = <&panel_in>;
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml
index 1646f41d8f72..cee1b504adf9 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml
@@ -150,44 +150,44 @@ examples:
 
         /* Using an of-graph endpoint link to connect the panel */
         lvds-channel@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
                 reg = <0>;
-                #address-cells = <1>;
-                #size-cells = <0>;
 
-                port@0 {
-                    reg = <0>;
-
-                    endpoint {
-                        remote-endpoint = <&ipu_di0_lvds0>;
-                    };
+                endpoint {
+                    remote-endpoint = <&ipu_di0_lvds0>;
                 };
+            };
 
-                port@2 {
-                    reg = <2>;
+            port@2 {
+                reg = <2>;
 
-                    endpoint {
-                        remote-endpoint = <&panel_in>;
-                    };
-               };
+                endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
         };
 
         /* Using display-timings and fsl,data-mapping/width instead */
         lvds-channel@1 {
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            fsl,data-mapping = "spwg";
+            fsl,data-width = <24>;
+
+            display-timings {/* ... */
+            };
+
+            port@1 {
                 reg = <1>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-                fsl,data-mapping = "spwg";
-                fsl,data-width = <24>;
 
-                display-timings {/* ... */
-                };
-
-                port@1 {
-                     reg = <1>;
-
-                     endpoint {
-                         remote-endpoint = <&ipu_di1_lvds1>;
-                     };
+                endpoint {
+                    remote-endpoint = <&ipu_di1_lvds1>;
                 };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
index 98db47894eeb..6c0edbae96d7 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
@@ -158,51 +158,51 @@ examples:
         #size-cells = <2>;
 
         hdr-engine@1c114000 {
-                compatible = "mediatek,mt8195-disp-ethdr";
-                reg = <0 0x1c114000 0 0x1000>,
-                      <0 0x1c115000 0 0x1000>,
-                      <0 0x1c117000 0 0x1000>,
-                      <0 0x1c119000 0 0x1000>,
-                      <0 0x1c11a000 0 0x1000>,
-                      <0 0x1c11b000 0 0x1000>,
-                      <0 0x1c11c000 0 0x1000>;
-                reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
-                            "vdo_be", "adl_ds";
-                mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
-                                          <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
-                                          <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
-                                          <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
-                                          <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
-                                          <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
-                                          <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
-                clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
-                         <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
-                         <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
-                         <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
-                         <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
-                         <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
-                         <&vdosys1 CLK_VDO1_26M_SLOW>,
-                         <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
-                         <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
-                         <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
-                         <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
-                         <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
-                         <&topckgen CLK_TOP_ETHDR>;
-                clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
-                              "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
-                              "gfx_fe0_async", "gfx_fe1_async","vdo_be_async",
-                              "ethdr_top";
-                power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
-                iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
-                         <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
-                interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */
-                resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
-                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
-                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
-                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
-                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
-                reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async",
-                              "gfx_fe1_async", "vdo_be_async";
+            compatible = "mediatek,mt8195-disp-ethdr";
+            reg = <0 0x1c114000 0 0x1000>,
+                  <0 0x1c115000 0 0x1000>,
+                  <0 0x1c117000 0 0x1000>,
+                  <0 0x1c119000 0 0x1000>,
+                  <0 0x1c11a000 0 0x1000>,
+                  <0 0x1c11b000 0 0x1000>,
+                  <0 0x1c11c000 0 0x1000>;
+            reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+                        "vdo_be", "adl_ds";
+            mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
+                                      <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
+                                      <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
+                                      <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
+                                      <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
+                                      <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
+                                      <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
+            clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
+                     <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
+                     <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
+                     <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
+                     <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
+                     <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
+                     <&vdosys1 CLK_VDO1_26M_SLOW>,
+                     <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
+                     <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
+                     <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
+                     <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
+                     <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
+                     <&topckgen CLK_TOP_ETHDR>;
+            clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+                          "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
+                          "gfx_fe0_async", "gfx_fe1_async","vdo_be_async",
+                          "ethdr_top";
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+            iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
+                     <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
+            interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */
+            resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
+                     <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
+                     <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
+                     <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
+                     <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
+            reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async",
+                          "gfx_fe1_async", "vdo_be_async";
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
index b90b6d18a828..9af876329e6a 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
@@ -112,24 +112,24 @@ examples:
         mediatek,syscon-hdmi = <&mmsys 0x900>;
 
         ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-          port@0 {
-            reg = <0>;
+            port@0 {
+                reg = <0>;
 
-            hdmi0_in: endpoint {
-              remote-endpoint = <&dpi0_out>;
+                hdmi0_in: endpoint {
+                    remote-endpoint = <&dpi0_out>;
+                };
             };
-          };
 
-          port@1 {
-            reg = <1>;
+            port@1 {
+                reg = <1>;
 
-            hdmi0_out: endpoint {
-              remote-endpoint = <&hdmi_con_in>;
+                hdmi0_out: endpoint {
+                    remote-endpoint = <&hdmi_con_in>;
+                };
             };
-          };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml
index e081c84a932b..6db87f7d70d8 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml
@@ -51,7 +51,7 @@ examples:
 
             port {
                 mipi_in_panel: endpoint {
-                  remote-endpoint = <&mipi_out_panel>;
+                    remote-endpoint = <&mipi_out_panel>;
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7567.yaml b/Documentation/devicetree/bindings/display/sitronix,st7567.yaml
index 2eb6d00b5a25..c007718541f6 100644
--- a/Documentation/devicetree/bindings/display/sitronix,st7567.yaml
+++ b/Documentation/devicetree/bindings/display/sitronix,st7567.yaml
@@ -64,5 +64,5 @@ examples:
                 vfront-porch = <0>;
                 vsync-len = <0>;
             };
-          };
-     };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
index 53560052aaf0..1b5f4317dab2 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -101,35 +101,35 @@ examples:
         #size-cells = <0>;
 
         ports {
-              #address-cells = <1>;
-              #size-cells = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-              port@0 {
-                    reg = <0>;
-                    dsi_in: endpoint {
-                        remote-endpoint = <&ltdc_ep1_out>;
-                    };
-              };
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&ltdc_ep1_out>;
+                };
+            };
 
-              port@1 {
-                    reg = <1>;
-                    dsi_out: endpoint {
-                        remote-endpoint = <&panel_in>;
-                    };
-              };
+            port@1 {
+                reg = <1>;
+                dsi_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
         };
 
         panel@0 {
-              compatible = "orisetech,otm8009a";
-              reg = <0>;
-              reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
-              power-supply = <&v3v3>;
+            compatible = "orisetech,otm8009a";
+            reg = <0>;
+            reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+            power-supply = <&v3v3>;
 
-              port {
-                    panel_in: endpoint {
-                        remote-endpoint = <&dsi_out>;
-                    };
-              };
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
index 77058a5ccf68..81c7772de25b 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -119,9 +119,9 @@ examples:
         resets = <&rcc LTDC_R>;
 
         port {
-             ltdc_out_dsi: endpoint {
-                     remote-endpoint = <&dsi_in>;
-             };
+            ltdc_out_dsi: endpoint {
+                remote-endpoint = <&dsi_in>;
+            };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
index 14e042156179..f8e43c5a656a 100644
--- a/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
@@ -114,14 +114,14 @@ examples:
             port@0 {
                 reg = <0>;
                 lvds_in: endpoint {
-                   remote-endpoint = <&ltdc_ep1_out>;
+                    remote-endpoint = <&ltdc_ep1_out>;
                 };
             };
 
             port@1 {
                 reg = <1>;
                 lvds_out0: endpoint {
-                   remote-endpoint = <&lvds_panel_in>;
+                    remote-endpoint = <&lvds_panel_in>;
                 };
             };
         };
-- 
2.53.0


^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2026-09-14  9:24 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-13 12:33 [PATCH 1/2] dt-bindings: display: Use consistent indentation in the example Krzysztof Kozlowski
2026-09-13 12:33 ` [PATCH 2/2] dt-bindings: display/msm: " Krzysztof Kozlowski
2026-09-13 22:51   ` Dmitry Baryshkov
2026-09-14  9:09   ` Luca Ceresoli
2026-09-14  9:09 ` [PATCH 1/2] dt-bindings: display: " Luca Ceresoli
2026-09-14  9:23 ` Javier Martinez Canillas

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®