fs mounted twice, writing to wrong partition with 3ware escalade ide-raid

fs mounted twice, writing to wrong partition with 3ware escalade ide-raid

[Andreas Gietl]

Hi,

i've got a problem on our new SMP machine with IDE-Raid and kernel 2.4.9 
that's giving me a terrible headache.

Our configuration:

2 WD drives in the raid1 array
1 Maxtor drive on normal ide

mystery #1:

I can mount a ext2 filesystem twice without any errors. The two filesystems 
contain different data and changes to the second mount don't affect the 
first mount. Strange!

Here is a snippet from console with /dev/sda5 mounted twice:

/dev/sda5 / ext2 rw,usrquota,grpquota 0 0
none /proc proc rw 0 0
/dev/sda7 /opt/root ext2 rw,usrquota,grpquota 0 0
/dev/sda6 /var ext2 rw,usrquota,grpquota 0 0
/dev/sda1 /boot ext2 rw 0 0
none /dev/pts devpts rw,gid=5,mode=620 0 0
/dev/sda5 /mnt ext2 rw 0 0

a strace on the mount command shows that the syscall mount is executed w/o 
error.

mount("/dev/sda5", "/mnt/", "ext2", 0xc0ed0000, 0) = 0  

As far as i know it should return EBUSY on a fs that is already mounted.

Second mystery:

the mounted /dev/hda3 contains the same data as /dev/sda5 and changes to one 
of them affect both partitions.

I'm not sure wether this is a kernel issue or a escalade firmware issue but 
perhaps one of you had that problem too and knows a solution.

Thank you

andreas




-- 
e-admin internet gmbh
Andreas Gietl
Roter-Brach-Weg 124a
tel +49 941 3810884
fax +49 941 3810891
mobil +49 171 6070008

Re: fs mounted twice, writing to wrong partition with 3ware escalade ide-raid

[Alexander Viro]

On Sun, 14 Oct 2001, Andreas Gietl wrote:

> a strace on the mount command shows that the syscall mount is executed w/o 
> error.
> 
> mount("/dev/sda5", "/mnt/", "ext2", 0xc0ed0000, 0) = 0  
> 
> As far as i know it should return EBUSY on a fs that is already mounted.

No, it shouldn't.  HOWEVER, trees should be in sync (actually, there's
only one tree and only one superblock).

> Second mystery:
> 
> the mounted /dev/hda3 contains the same data as /dev/sda5 and changes to one 
> of them affect both partitions.

Please, post your /proc/mounts.  Results of ls -l /dev/hda3 /dev/sda5
would also be very interesting.