* hdb=flash doesn't help
@ 2003-02-06 9:48 Guennadi Liakhovetski
0 siblings, 0 replies; only message in thread
From: Guennadi Liakhovetski @ 2003-02-06 9:48 UTC (permalink / raw)
To: linux-kernel
Hello
We have a system with 2 CF-disks connected
directly to the IDE-controller (PIIX4). We
used before the "old" IDE-driver hd.c and it
worked fine, until we had to use a larger
disk (1.5GB). Then we disabled hd.c, and
appended hdb=flash. Then initially at boot
both drives are identified:
PIIX4: IDE controller...
PIIX4 chipset revision 1
PIIX4: not 100% native mode...
ide0: BM-DMA at...
hda: Hitachi...
hdb: ...
ide0 at...
hdb: 31488 sectors (16MB)...
Partition check:
hdb: hdb1
...
And that's it. hda never appears again. And
what is also strange, the order of hda/b is
swapped, compared to the old hd.c driver and
to BIOS settings. What's the reason for this
behaviour and how do we fix it?
Thanks
Guennadi
---
Guennadi Liakhovetski
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-02-06 9:38 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-02-06 9:48 hdb=flash doesn't help Guennadi Liakhovetski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®