Applied "regulator: i.MX anatop: Allow supply regulator" to the regulator tree

Applied "regulator: i.MX anatop: Allow supply regulator" to the regulator tree

[Mark Brown]

The patch

   regulator: i.MX anatop: Allow supply regulator

has been applied to the regulator tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 0d19208e70b3a65144c7a0b6368f849c57818242 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 13 Oct 2015 12:45:30 +0200
Subject: [PATCH] regulator: i.MX anatop: Allow supply regulator

The anatop regulators are SoC internal LDO regulators usually supplied
by an external PMIC. This patch adds support for specifying the supply
from the device tree using the vin-supply property.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 Documentation/devicetree/bindings/regulator/anatop-regulator.txt | 1 +
 drivers/regulator/anatop-regulator.c                             | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
index 758eae24082a..37c4ea076f88 100644
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
@@ -13,6 +13,7 @@ Optional properties:
 - anatop-delay-reg-offset: Anatop MFD step time register offset
 - anatop-delay-bit-shift: Bit shift for the step time register
 - anatop-delay-bit-width: Number of bits used in the step time register
+- vin-supply: The supply for this regulator
 
 Any property defined as part of the core regulator
 binding, defined in regulator.txt, can also be used.
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 738adfa5332b..7d99f2c8cef3 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -30,6 +30,7 @@
 #include <linux/regmap.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
 
 #define LDO_RAMP_UP_UNIT_IN_CYCLES      64 /* 64 cycles per step */
 #define LDO_RAMP_UP_FREQ_IN_MHZ         24 /* cycle based on 24M OSC */
@@ -199,6 +200,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 	rdesc->owner = THIS_MODULE;
 
 	initdata = of_get_regulator_init_data(dev, np, rdesc);
+	initdata->supply_regulator = "vin";
 	sreg->initdata = initdata;
 
 	anatop_np = of_get_parent(np);
@@ -262,6 +264,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 	rdesc->vsel_reg = sreg->control_reg;
 	rdesc->vsel_mask = ((1 << sreg->vol_bit_width) - 1) <<
 			   sreg->vol_bit_shift;
+	rdesc->min_dropout_uV = 125000;
 
 	config.dev = &pdev->dev;
 	config.init_data = initdata;
-- 
2.6.1