[PATCH 1/6] ASoC: AMD: Always stop ch2 first

[PATCH 1/6] ASoC: AMD: Always stop ch2 first

[Daniel Kurtz]

Commit 6b116dfb4633a ("ASoC: AMD: make channel 1 dma as circular") made
both channels circular, so this comment and logic no longer applies.  Always
stop ch2 (the channel closest to the output) before ch1.  This ensures
that the downstream circular DMA channel does not continue to play/capture
repeated samples after the upstream circular DMA channel has already
stopped.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
 sound/soc/amd/acp-pcm-dma.c | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 3c3d398d0d0b1..4665ae12e74e4 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -1067,21 +1067,8 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
-		/* For playback, non circular dma should be stopped first
-		 * i.e Sysram to acp dma transfer channel(rtd->ch1) should be
-		 * stopped before stopping cirular dma which is acp sram to i2s
-		 * fifo dma transfer channel(rtd->ch2). Where as in Capture
-		 * scenario, i2s fifo to acp sram dma channel(rtd->ch2) stopped
-		 * first before stopping acp sram to sysram which is circular
-		 * dma(rtd->ch1).
-		 */
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-			acp_dma_stop(rtd->acp_mmio, rtd->ch1);
-			ret =  acp_dma_stop(rtd->acp_mmio, rtd->ch2);
-		} else {
-			acp_dma_stop(rtd->acp_mmio, rtd->ch2);
-			ret = acp_dma_stop(rtd->acp_mmio, rtd->ch1);
-		}
+		acp_dma_stop(rtd->acp_mmio, rtd->ch2);
+		ret = acp_dma_stop(rtd->acp_mmio, rtd->ch1);
 		rtd->bytescount = 0;
 		break;
 	default:
-- 
2.18.0.399.gad0ab374a1-goog

[PATCH 2/6] ASoC: AMD: Reset bytescount when starting transaction

[Daniel Kurtz]

The pointer() callback gets its value by reading the I2S BYTE_COUNT
register.  This is a 64-bit runnning transaction counter. If a
transaction was aborted in the middle of a sample buffer, the counter will
stop counting on a number divisible by the buffer size.  Since we actually
use it as a pointer into an aligned buffer, however, we do want to ensure
that it always starts at a number divisible by the buffer size when
starting a transaction, hence we reset it whenever starting a transaction.

To accomplish this, it wasn't necessary to zero bytescount at the
termination of each transaction, so remove this unnecessary code.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
 sound/soc/amd/acp-pcm-dma.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 4665ae12e74e4..e6f85f2e5ac2a 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -1029,7 +1029,6 @@ static int acp_dma_prepare(struct snd_pcm_substream *substream)
 static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 {
 	int ret;
-	u64 bytescount = 0;
 
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct audio_substream_data *rtd = runtime->private_data;
@@ -1040,9 +1039,7 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 	case SNDRV_PCM_TRIGGER_RESUME:
-		bytescount = acp_get_byte_count(rtd);
-		if (rtd->bytescount == 0)
-			rtd->bytescount = bytescount;
+		rtd->bytescount = acp_get_byte_count(rtd);
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 			acp_dma_start(rtd->acp_mmio, rtd->ch1);
 			acp_dma_start(rtd->acp_mmio, rtd->ch2);
@@ -1069,7 +1066,6 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 		acp_dma_stop(rtd->acp_mmio, rtd->ch2);
 		ret = acp_dma_stop(rtd->acp_mmio, rtd->ch1);
-		rtd->bytescount = 0;
 		break;
 	default:
 		ret = -EINVAL;
-- 
2.18.0.399.gad0ab374a1-goog

Applied "ASoC: AMD: Reset bytescount when starting transaction" to the asoc tree

[Mark Brown]

The patch

   ASoC: AMD: Reset bytescount when starting transaction

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 1a337a1e7885085d224583c766614e5945bde671 Mon Sep 17 00:00:00 2001
From: Daniel Kurtz <djkurtz@chromium.org>
Date: Mon, 2 Jul 2018 15:19:51 -0600
Subject: [PATCH] ASoC: AMD: Reset bytescount when starting transaction

The pointer() callback gets its value by reading the I2S BYTE_COUNT
register.  This is a 64-bit runnning transaction counter. If a
transaction was aborted in the middle of a sample buffer, the counter will
stop counting on a number divisible by the buffer size.  Since we actually
use it as a pointer into an aligned buffer, however, we do want to ensure
that it always starts at a number divisible by the buffer size when
starting a transaction, hence we reset it whenever starting a transaction.

To accomplish this, it wasn't necessary to zero bytescount at the
termination of each transaction, so remove this unnecessary code.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/amd/acp-pcm-dma.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index cd4d2520ac14..ab60129f4f26 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -1013,7 +1013,6 @@ static int acp_dma_prepare(struct snd_pcm_substream *substream)
 static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 {
 	int ret;
-	u64 bytescount = 0;
 
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct audio_substream_data *rtd = runtime->private_data;
@@ -1024,9 +1023,7 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 	case SNDRV_PCM_TRIGGER_RESUME:
-		bytescount = acp_get_byte_count(rtd);
-		if (rtd->bytescount == 0)
-			rtd->bytescount = bytescount;
+		rtd->bytescount = acp_get_byte_count(rtd);
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 			acp_dma_start(rtd->acp_mmio, rtd->ch1);
 			acp_dma_start(rtd->acp_mmio, rtd->ch2);
@@ -1053,7 +1050,6 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 		acp_dma_stop(rtd->acp_mmio, rtd->ch2);
 		ret = acp_dma_stop(rtd->acp_mmio, rtd->ch1);
-		rtd->bytescount = 0;
 		break;
 	default:
 		ret = -EINVAL;
-- 
2.18.0.rc2

[PATCH 3/6] ASoC: AMD: Always subtract bytescount

[Daniel Kurtz]

It is always correct to subtract out the starting bytescount value.  Even
in the case of 2^64 byte rollover (292 Million Years in the future
@ 48000 Hz) the math still works out.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
 sound/soc/amd/acp-pcm-dma.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index e6f85f2e5ac2a..224383fef0c3a 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -995,8 +995,7 @@ static snd_pcm_uframes_t acp_dma_pointer(struct snd_pcm_substream *substream)
 	buffersize = frames_to_bytes(runtime, runtime->buffer_size);
 	bytescount = acp_get_byte_count(rtd);
 
-	if (bytescount > rtd->bytescount)
-		bytescount -= rtd->bytescount;
+	bytescount -= rtd->bytescount;
 	pos = do_div(bytescount, buffersize);
 	return bytes_to_frames(runtime, pos);
 }
-- 
2.18.0.399.gad0ab374a1-goog

Applied "ASoC: AMD: Always subtract bytescount" to the asoc tree

[Mark Brown]

The patch

   ASoC: AMD: Always subtract bytescount

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 715cdce04487fb23d5c10693b3bc01309fea955a Mon Sep 17 00:00:00 2001
From: Daniel Kurtz <djkurtz@chromium.org>
Date: Mon, 2 Jul 2018 15:19:52 -0600
Subject: [PATCH] ASoC: AMD: Always subtract bytescount

It is always correct to subtract out the starting bytescount value.  Even
in the case of 2^64 byte rollover (292 Million Years in the future
@ 48000 Hz) the math still works out.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/amd/acp-pcm-dma.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 4665ae12e74e..034fac3de037 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -995,8 +995,7 @@ static snd_pcm_uframes_t acp_dma_pointer(struct snd_pcm_substream *substream)
 	buffersize = frames_to_bytes(runtime, runtime->buffer_size);
 	bytescount = acp_get_byte_count(rtd);
 
-	if (bytescount > rtd->bytescount)
-		bytescount -= rtd->bytescount;
+	bytescount -= rtd->bytescount;
 	pos = do_div(bytescount, buffersize);
 	return bytes_to_frames(runtime, pos);
 }
-- 
2.18.0.rc2

[PATCH 4/6] ASoC: AMD: Fix Capture DMA channel names

[Daniel Kurtz]

On capture, audio data is first copied from I2S to ACP memory, and then
to SYSRAM.  For each step the channel number increases, so the names in
the driver were wrong.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
 sound/soc/amd/acp-pcm-dma.c | 24 ++++++++++++------------
 sound/soc/amd/acp.h         |  8 ++++----
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 224383fef0c3a..2a6a6e65e27c3 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -697,31 +697,31 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) {
+	if ((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) != 0) {
 		valid_irq = true;
 		snd_pcm_period_elapsed(irq_data->capture_i2ssp_stream);
-		acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16,
+		acp_reg_write((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) != 0) {
+	if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) {
 		valid_irq = true;
-		acp_reg_write((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) << 16,
+		acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) {
+	if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) {
 		valid_irq = true;
 		snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream);
 		acp_reg_write((intr_flag &
-			      BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16,
+			      BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) {
+	if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) {
 		valid_irq = true;
 		acp_reg_write((intr_flag &
-			      BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) << 16,
+			      BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
@@ -899,8 +899,8 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream,
 		switch (rtd->i2s_instance) {
 		case I2S_BT_INSTANCE:
 			rtd->pte_offset = ACP_ST_BT_CAPTURE_PTE_OFFSET;
-			rtd->ch1 = ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM;
-			rtd->ch2 = I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM;
+			rtd->ch1 = I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM;
+			rtd->ch2 = ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM;
 			rtd->sram_bank = ACP_SRAM_BANK_4_ADDRESS;
 			rtd->destination = FROM_BLUETOOTH;
 			rtd->dma_dscr_idx_1 = CAPTURE_START_DMA_DESCR_CH10;
@@ -914,8 +914,8 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream,
 		case I2S_SP_INSTANCE:
 		default:
 			rtd->pte_offset = ACP_CAPTURE_PTE_OFFSET;
-			rtd->ch1 = ACP_TO_SYSRAM_CH_NUM;
-			rtd->ch2 = I2S_TO_ACP_DMA_CH_NUM;
+			rtd->ch1 = I2S_TO_ACP_DMA_CH_NUM;
+			rtd->ch2 = ACP_TO_SYSRAM_CH_NUM;
 			switch (adata->asic_type) {
 			case CHIP_STONEY:
 				rtd->pte_offset = ACP_ST_CAPTURE_PTE_OFFSET;
diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h
index 3190fdce63074..0a2240bff62e1 100644
--- a/sound/soc/amd/acp.h
+++ b/sound/soc/amd/acp.h
@@ -74,16 +74,16 @@
 #define ACP_TO_I2S_DMA_CH_NUM 13
 
 /* Capture DMA channels */
-#define ACP_TO_SYSRAM_CH_NUM 14
-#define I2S_TO_ACP_DMA_CH_NUM 15
+#define I2S_TO_ACP_DMA_CH_NUM 14
+#define ACP_TO_SYSRAM_CH_NUM 15
 
 /* Playback DMA Channels for I2S BT instance */
 #define SYSRAM_TO_ACP_BT_INSTANCE_CH_NUM  8
 #define ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM 9
 
 /* Capture DMA Channels for I2S BT Instance */
-#define ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM 10
-#define I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM 11
+#define I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM 10
+#define ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM 11
 
 #define NUM_DSCRS_PER_CHANNEL 2
 
-- 
2.18.0.399.gad0ab374a1-goog

Applied "ASoC: AMD: Fix Capture DMA channel names" to the asoc tree

[Mark Brown]

The patch

   ASoC: AMD: Fix Capture DMA channel names

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 55af49ac1b8627dfbfa2689af118d994d7a0ba1b Mon Sep 17 00:00:00 2001
From: Daniel Kurtz <djkurtz@chromium.org>
Date: Mon, 2 Jul 2018 15:19:53 -0600
Subject: [PATCH] ASoC: AMD: Fix Capture DMA channel names

On capture, audio data is first copied from I2S to ACP memory, and then
to SYSRAM.  For each step the channel number increases, so the names in
the driver were wrong.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/amd/acp-pcm-dma.c | 24 ++++++++++++------------
 sound/soc/amd/acp.h         |  8 ++++----
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 034fac3de037..df53412967e1 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -697,31 +697,31 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) {
+	if ((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) != 0) {
 		valid_irq = true;
 		snd_pcm_period_elapsed(irq_data->capture_i2ssp_stream);
-		acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16,
+		acp_reg_write((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) != 0) {
+	if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) {
 		valid_irq = true;
-		acp_reg_write((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) << 16,
+		acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) {
+	if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) {
 		valid_irq = true;
 		snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream);
 		acp_reg_write((intr_flag &
-			      BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16,
+			      BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) {
+	if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) {
 		valid_irq = true;
 		acp_reg_write((intr_flag &
-			      BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) << 16,
+			      BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
@@ -899,8 +899,8 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream,
 		switch (rtd->i2s_instance) {
 		case I2S_BT_INSTANCE:
 			rtd->pte_offset = ACP_ST_BT_CAPTURE_PTE_OFFSET;
-			rtd->ch1 = ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM;
-			rtd->ch2 = I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM;
+			rtd->ch1 = I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM;
+			rtd->ch2 = ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM;
 			rtd->sram_bank = ACP_SRAM_BANK_4_ADDRESS;
 			rtd->destination = FROM_BLUETOOTH;
 			rtd->dma_dscr_idx_1 = CAPTURE_START_DMA_DESCR_CH10;
@@ -914,8 +914,8 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream,
 		case I2S_SP_INSTANCE:
 		default:
 			rtd->pte_offset = ACP_CAPTURE_PTE_OFFSET;
-			rtd->ch1 = ACP_TO_SYSRAM_CH_NUM;
-			rtd->ch2 = I2S_TO_ACP_DMA_CH_NUM;
+			rtd->ch1 = I2S_TO_ACP_DMA_CH_NUM;
+			rtd->ch2 = ACP_TO_SYSRAM_CH_NUM;
 			switch (adata->asic_type) {
 			case CHIP_STONEY:
 				rtd->pte_offset = ACP_ST_CAPTURE_PTE_OFFSET;
diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h
index 3190fdce6307..0a2240bff62e 100644
--- a/sound/soc/amd/acp.h
+++ b/sound/soc/amd/acp.h
@@ -74,16 +74,16 @@
 #define ACP_TO_I2S_DMA_CH_NUM 13
 
 /* Capture DMA channels */
-#define ACP_TO_SYSRAM_CH_NUM 14
-#define I2S_TO_ACP_DMA_CH_NUM 15
+#define I2S_TO_ACP_DMA_CH_NUM 14
+#define ACP_TO_SYSRAM_CH_NUM 15
 
 /* Playback DMA Channels for I2S BT instance */
 #define SYSRAM_TO_ACP_BT_INSTANCE_CH_NUM  8
 #define ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM 9
 
 /* Capture DMA Channels for I2S BT Instance */
-#define ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM 10
-#define I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM 11
+#define I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM 10
+#define ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM 11
 
 #define NUM_DSCRS_PER_CHANNEL 2
 
-- 
2.18.0.rc2

[PATCH 5/6] ASoC: AMD: Do not generate interrups for every captured sample

[Daniel Kurtz]

On capture, audio data is first copied from I2S to ACP memory, and then
from ACP to SYSRAM.  The I2S_TO_ACP_DMA interrupt fires on every sample
transferred from I2S to ACP memory.  That is it fires ~48000 times per
second when capturing @ 48 kHz.  Since we don't do anything on this
interrupt anyway, disable it to save quite a few unnecessary interrupts.
The real "work" (calling snd_pcm_period_elapsed()) is done when transfer
from ACP to SYSRAM is complete.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
 sound/soc/amd/acp-pcm-dma.c | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 2a6a6e65e27c3..ab60129f4f266 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -412,10 +412,8 @@ static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num)
 	switch (ch_num) {
 	case ACP_TO_I2S_DMA_CH_NUM:
 	case ACP_TO_SYSRAM_CH_NUM:
-	case I2S_TO_ACP_DMA_CH_NUM:
 	case ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM:
 	case ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM:
-	case I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM:
 		dma_ctrl |= ACP_DMA_CNTL_0__DMAChIOCEn_MASK;
 		break;
 	default:
@@ -704,12 +702,6 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) {
-		valid_irq = true;
-		acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16,
-			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
-	}
-
 	if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) {
 		valid_irq = true;
 		snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream);
@@ -718,13 +710,6 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) {
-		valid_irq = true;
-		acp_reg_write((intr_flag &
-			      BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16,
-			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
-	}
-
 	if (valid_irq)
 		return IRQ_HANDLED;
 	else
-- 
2.18.0.399.gad0ab374a1-goog

Applied "ASoC: AMD: Do not generate interrups for every captured sample" to the asoc tree

[Mark Brown]

The patch

   ASoC: AMD: Do not generate interrups for every captured sample

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 8c6b964eddd2c39a9796899b2be099ece1b6c6ca Mon Sep 17 00:00:00 2001
From: Daniel Kurtz <djkurtz@chromium.org>
Date: Mon, 2 Jul 2018 15:19:54 -0600
Subject: [PATCH] ASoC: AMD: Do not generate interrups for every captured
 sample

On capture, audio data is first copied from I2S to ACP memory, and then
from ACP to SYSRAM.  The I2S_TO_ACP_DMA interrupt fires on every sample
transferred from I2S to ACP memory.  That is it fires ~48000 times per
second when capturing @ 48 kHz.  Since we don't do anything on this
interrupt anyway, disable it to save quite a few unnecessary interrupts.
The real "work" (calling snd_pcm_period_elapsed()) is done when transfer
from ACP to SYSRAM is complete.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/amd/acp-pcm-dma.c | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index df53412967e1..cd4d2520ac14 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -412,10 +412,8 @@ static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num)
 	switch (ch_num) {
 	case ACP_TO_I2S_DMA_CH_NUM:
 	case ACP_TO_SYSRAM_CH_NUM:
-	case I2S_TO_ACP_DMA_CH_NUM:
 	case ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM:
 	case ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM:
-	case I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM:
 		dma_ctrl |= ACP_DMA_CNTL_0__DMAChIOCEn_MASK;
 		break;
 	default:
@@ -704,12 +702,6 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) {
-		valid_irq = true;
-		acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16,
-			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
-	}
-
 	if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) {
 		valid_irq = true;
 		snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream);
@@ -718,13 +710,6 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) {
-		valid_irq = true;
-		acp_reg_write((intr_flag &
-			      BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16,
-			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
-	}
-
 	if (valid_irq)
 		return IRQ_HANDLED;
 	else
-- 
2.18.0.rc2

[PATCH 6/6] ASoC: AMD: Simplify trigger handler

[Daniel Kurtz]

Now that the I2S channel names are fixed, and DMA data flow order is
consistent (ch1 then ch2), we can simplify channel start order:
start the upstream channel and then the downstream channel for both
playback and capture cases.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
 sound/soc/amd/acp-pcm-dma.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index ab60129f4f266..65c1033bd51cc 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -1024,10 +1024,7 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 	case SNDRV_PCM_TRIGGER_RESUME:
 		rtd->bytescount = acp_get_byte_count(rtd);
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-			acp_dma_start(rtd->acp_mmio, rtd->ch1);
-			acp_dma_start(rtd->acp_mmio, rtd->ch2);
-		} else {
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
 			if (rtd->capture_channel == CAP_CHANNEL0) {
 				acp_dma_cap_channel_disable(rtd->acp_mmio,
 							    CAP_CHANNEL1);
@@ -1040,9 +1037,9 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 				acp_dma_cap_channel_enable(rtd->acp_mmio,
 							   CAP_CHANNEL1);
 			}
-			acp_dma_start(rtd->acp_mmio, rtd->ch2);
-			acp_dma_start(rtd->acp_mmio, rtd->ch1);
 		}
+		acp_dma_start(rtd->acp_mmio, rtd->ch1);
+		acp_dma_start(rtd->acp_mmio, rtd->ch2);
 		ret = 0;
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
-- 
2.18.0.399.gad0ab374a1-goog

Applied "ASoC: AMD: Simplify trigger handler" to the asoc tree

[Mark Brown]

The patch

   ASoC: AMD: Simplify trigger handler

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From df61f9f76609456efbc60d495b3235baf7d07691 Mon Sep 17 00:00:00 2001
From: Daniel Kurtz <djkurtz@chromium.org>
Date: Mon, 2 Jul 2018 15:19:55 -0600
Subject: [PATCH] ASoC: AMD: Simplify trigger handler

Now that the I2S channel names are fixed, and DMA data flow order is
consistent (ch1 then ch2), we can simplify channel start order:
start the upstream channel and then the downstream channel for both
playback and capture cases.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/amd/acp-pcm-dma.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index ab60129f4f26..65c1033bd51c 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -1024,10 +1024,7 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 	case SNDRV_PCM_TRIGGER_RESUME:
 		rtd->bytescount = acp_get_byte_count(rtd);
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-			acp_dma_start(rtd->acp_mmio, rtd->ch1);
-			acp_dma_start(rtd->acp_mmio, rtd->ch2);
-		} else {
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
 			if (rtd->capture_channel == CAP_CHANNEL0) {
 				acp_dma_cap_channel_disable(rtd->acp_mmio,
 							    CAP_CHANNEL1);
@@ -1040,9 +1037,9 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 				acp_dma_cap_channel_enable(rtd->acp_mmio,
 							   CAP_CHANNEL1);
 			}
-			acp_dma_start(rtd->acp_mmio, rtd->ch2);
-			acp_dma_start(rtd->acp_mmio, rtd->ch1);
 		}
+		acp_dma_start(rtd->acp_mmio, rtd->ch1);
+		acp_dma_start(rtd->acp_mmio, rtd->ch2);
 		ret = 0;
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
-- 
2.18.0.rc2

Applied "ASoC: AMD: Always stop ch2 first" to the asoc tree

[Mark Brown]

The patch

   ASoC: AMD: Always stop ch2 first

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 30896d3619bd80486a3f8a75d62ea3b58fc61ad5 Mon Sep 17 00:00:00 2001
From: Daniel Kurtz <djkurtz@chromium.org>
Date: Mon, 2 Jul 2018 15:19:50 -0600
Subject: [PATCH] ASoC: AMD: Always stop ch2 first

Commit 6b116dfb4633a ("ASoC: AMD: make channel 1 dma as circular") made
both channels circular, so this comment and logic no longer applies.  Always
stop ch2 (the channel closest to the output) before ch1.  This ensures
that the downstream circular DMA channel does not continue to play/capture
repeated samples after the upstream circular DMA channel has already
stopped.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/amd/acp-pcm-dma.c | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 3c3d398d0d0b..4665ae12e74e 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -1067,21 +1067,8 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
-		/* For playback, non circular dma should be stopped first
-		 * i.e Sysram to acp dma transfer channel(rtd->ch1) should be
-		 * stopped before stopping cirular dma which is acp sram to i2s
-		 * fifo dma transfer channel(rtd->ch2). Where as in Capture
-		 * scenario, i2s fifo to acp sram dma channel(rtd->ch2) stopped
-		 * first before stopping acp sram to sysram which is circular
-		 * dma(rtd->ch1).
-		 */
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-			acp_dma_stop(rtd->acp_mmio, rtd->ch1);
-			ret =  acp_dma_stop(rtd->acp_mmio, rtd->ch2);
-		} else {
-			acp_dma_stop(rtd->acp_mmio, rtd->ch2);
-			ret = acp_dma_stop(rtd->acp_mmio, rtd->ch1);
-		}
+		acp_dma_stop(rtd->acp_mmio, rtd->ch2);
+		ret = acp_dma_stop(rtd->acp_mmio, rtd->ch1);
 		rtd->bytescount = 0;
 		break;
 	default:
-- 
2.18.0.rc2